Khademite, ideally Al(SO4)F(H2O)5, from the Monte Arsiccio mine, Apuan Alps, Tuscany, Italy, has been characterised through quantitative electron microprobe analysis, micro-Raman spectroscopy and single-crystal X-ray diffraction. Khademite occurs as colourless to whitish tabular crystals, up to 5 mm. Electron microprobe analysis (in wt.%, average of 20 spot analyses) gave: SO3 35.43, Al2O3 21.27, F 6.92, H2Ocalc 39.73, sum 103.35, –O = F 2.92, total 100.43. On the basis of 10 anions per formula unit, assuming the occurrence of 5 H2O groups and 1 (F+OH) atom per formula unit, its chemical formula can be written as Al0.96S1.02O4[F0.84(OH)0.16]Σ1.00⋅5H2O. The Raman spectrum of khademite is characterised by the occurrence of vibrational modes of SO4 groups and by broad and strong bands due to the O–H stretching modes. Khademite is orthorhombic, space group Pcab, with unit-cell parameters a = 11.1713(2), b = 13.0432(3), c = 10.8815(2) Å, V = 1585.54(5) Å3 and Z = 8. The crystal structure refinement converged to R1 = 0.0293 on the basis of 2359 unique reflections with Fo > 4σ(Fo) and 152 refined parameters. The crystal structure of khademite is characterised by the alternation, along b, of two distinct kinds of {010} layers, one formed by [001] rows of isolated Al-centred octahedra, connected to each other through H bonds, and the other showing isolated SO4 groups. Along b, oxygen atoms belonging to SO4 groups act as acceptor of H bonds from H2O groups coordinating Al atoms. The new data improved the description of the H bonds in khademite and led us to discuss about the possible existence of its (OH)-analogue, rostite. In addition, Raman spectroscopic data were collected on the same crystal used for the crystal-chemical characterisation, allowing a comparison with previous results.

The new mineral isselite, Cu6(SO4)(OH)10(H2O)4⋅H2O, has been discovered in the Lagoscuro mine, Monte Ramazzo mining complex, Genoa, Eastern Liguria, Italy. It occurs as sprays of blue acicular crystals, up to 0.1 mm long, associated with brochantite and posnjakite. Streak is light blue and the lustre is vitreous. Isselite is brittle, with irregular fracture and good cleavage on {001} and {100}. Measured density is 3.00(2) g/cm3. Isselite is optically biaxial (–), with α = 1.599(2), β = 1.633(2) and γ = 1.647(2) (determined in white light). The measured 2V is 63.6(5)°. Dispersion is moderate, with r > v. The optical orientation is X = b, Y = c and Z = a. Isselite is pleochroic, with X = light blue, Y = blue, Z = blue; X << Z < Y. Electron microprobe analyses give (wt.%): SO3 11.45(21), MgO 0.31(7), CoO 1.07(14), NiO 9.41(90), CuO 51.29(126), ZnO 1.10(20), H2Ocalc 24.21, total 98.84. The empirical formula of isselite, based on Σ(Mg,Co,Ni,Cu,Zn) = 6 atoms per formula unit, is (Cu4.80Ni0.94Co0.11Zn0.10Mg0.06)Σ6.00(S1.06O4.19)(OH)10⋅5H2O. Isselite is orthorhombic, space group Pmn21, with unit-cell parameters a = 6.8070(14), b = 5.8970(12), c = 20.653(4) Å, V = 829.0(3) Å3 and Z = 2. The crystal structure of isselite was refined from single-crystal X-ray diffraction data to R1 = 0.067 on the basis of 2964 reflections with Fo > 4σ(Fo). It shows a layered structure formed by zig-zag {001} layers of Cu-centred polyhedra. Sulfate groups occur in the interlayer along with one H2O group. Isselite is chemically related to redgillite and montetrisaite.

The crystal structure of pyrostilpnite from the Plaka mine, Lavrion Mining District, Greece, was refined in the space group P21/c to a final R1 index of 0.0283 on the basis of 2047 reflections with Fo > 4σ(Fo) and 65 refined parameters. Unit-cell parameters of the crystal examined are a = 6.8629(6), b = 15.8800(14), c = 6.2711(5) Å, β = 117.087(2)°, V = 608.48(9) Å3 and Z = 4. Chemical data agree with the stoichiometric formula Ag3SbS3. The crystal structure reported previously was confirmed, although a higher precision of refinement was achieved. It can be described as formed by {010} slabs running along c and connected along a through relatively longer Ag–S bonds. The analysis of the atomic displacement parameters together with a refinement with higher order tensors in the expression of the structure factors revealed no hint for pyrostilpnite as an ionic conductor. A historical background of the ‘ruby silvers’ is also reported.

Tetrahedrite-(Hg), Cu6(Cu4Hg2)Sb4S13, has been approved as a new mineral species using samples from Buca della Vena mine (hereafter BdV), Italy, Jedová hora (Jh), Czech Republic and Rožňava (R), Slovakia. It occurs as anhedral grains or as tetrahedral crystals, black in colour, with metallic lustre. At BdV it is associated with cinnabar and chalcostibite in dolomite veins. At Jh, tetrahedrite-(Hg) is associated with baryte and chalcopyrite in quartz–siderite–dolomite veins; at R it is associated with quartz in siderite–quartz veins. Tetrahedrite-(Hg) is isotropic, greyish-white in colour, with creamy tints. Minimum and maximum reflectance data for Commission on Ore Mineralogy wavelengths in air (BdV sample), R in %) are 32.5 at 420 nm; 32.9 at 546 nm; 33.2 at 589 nm; and 30.9 at 650 nm. Chemical formulae of the samples studied, recalculated on the basis of 4 (As + Sb + Bi) atoms per formula unit, are: (Cu9.44Ag0.07)Σ9.51(Hg1.64Zn0.36Fe0.06)Σ2.06Sb4(S12.69Se0.01)Σ12.70 (BdV), Cu9.69(Hg1.75Fe0.25Zn0.06)Σ2.06(Sb3.94As0.06)S12.87 (Jh) and (Cu9.76Ag0.04) Σ9.80(Hg1.83Fe0.15Zn0.10)Σ2.08(Sb3.17As0.58Bi0.25)S13.01 (R). Tetrahedrite-(Hg) is cubic, I$\overline 4 $3m, with a = 10.5057(8) Å, V = 1159.5(3) Å3 and Z = 2 (BdV). Unit-cell parameters for the other two samples are a = 10.4939(1) Å and V = 1155.61(5) Å3 (Jh) and a = 10.4725(1) Å and V = 1148.55(6) Å3 (R). The crystal structure of tetrahedrite-(Hg) has been refined by single-crystal X-ray diffraction data to a final R1 = 0.019 on the basis of 335 reflections with Fo > 4σ(Fo) and 20 refined parameters. Tetrahedrite-(Hg) is isotypic with other members of the tetrahedrite group. Mercury is hosted at the tetrahedrally coordinated M(1) site, along with minor Zn and Fe. The occurrence of Hg at this position agrees both with the relatively large M(1)–S(1) bond distance (2.393 Å) and the refined site scattering. Previous occurrences of Hg-rich tetrahedrite and tetrahedrite-(Hg) are reviewed, and its relations with other Hg sulfosalts are discussed.

Langhofite, ideally Pb2(OH)[WO4(OH)], is a new mineral from the Långban mine, Värmland, Sweden. The mineral and its name were approved by the International Mineralogical Association Commission on New Minerals, Nomenclature and Classification (IMA2019-005). It occurs in a small vug in hematite–pyroxene skarn associated with calcite, baryte, fluorapatite, mimetite and minor sulfide minerals. Langhofite is triclinic, space group P$\bar{1}$, and unit-cell parameters a = 6.6154(1) Å, b = 7.0766(1) Å, c = 7.3296(1) Å, α = 118.175(2)°, β = 94.451(1)°, γ = 101.146(1)° and V = 291.06(1) Å3 for Z = 2. The seven strongest Bragg peaks from powder X-ray diffractometry are [dobs, Å (I)(hkl)]: 6.04(24)(010), 3.26(22)(11$\bar{2}$), 3.181(19)(200), 3.079(24)(1$\bar{1}$2), 3.016(100)(020), 2.054(20)(3$\bar{1}$1) and 2.050(18)(13$\bar{2}$). Langhofite occurs as euhedral crystals up to 4 mm, elongated along the a axis, with lengthwise striation. Mohs hardness is ca. 2½, based on VHN25 data obtained in the range 130–192. The mineral is brittle, with perfect {010} and {100} cleavages. The calculated density based on the ideal formula is 7.95(1) g⋅cm–3. Langhofite is colourless to white (non-pleochroic) and transparent, with a white streak and adamantine lustre. Reflectance curves show normal dispersion, with maximum values 15.7–13.4% within 400–700 nm. Electron microprobe analyses yield only the metals Pb and W above the detection level. The presence of OH-groups is demonstrated with vibration spectroscopy, from band maxima present at ~3470 and 3330 cm–1. A distinct Raman peak at ca. 862 cm–1 is related to symmetric W–oxygen stretching vibrations. The crystal structure is novel and was refined to R = 1.6%. It contains [W2O8(OH)2]6– edge-sharing dimers (with highly distorted WO6-octahedra) forming chains along [101] with [(OH)2Pb4]6+ dimers formed by (OH)Pb3 triangles. Chains configure (010) layers linked along [010] by long and weak Pb–O bonds, thus explaining the observed perfect cleavage on {010}. The mineral is named for curator Jörgen Langhof (b. 1965), who collected the discovery sample.

Biagioniite, ideally Tl2SbS2, is a new mineral from the Hemlo gold deposit, Marathon, Ontario, Canada. It occurs as very rare anhedral crystals up to 65 μm across associated with aurostibite, stibarsen and native gold in a calcite matrix. Biagioniite is opaque with a metallic lustre and shows a black streak. In reflected light biagioniite is moderately bireflectant and not pleochroic. Under crossed polars it is weakly anisotropic with blueish to light-blue rotation tints. Internal reflections are absent.

Reflectance percentages for the four standard wavelengths (Rmin and Rmax) are 35.9 and 37.5 (471.1 nm); 34.7 and 36.2 (548.3 nm); 33.8 and 35.3 (586.6 nm); and 31.5 and 33.7 (652.3 nm), respectively. A mean of four electron microprobe analyses gave: Tl 65.12(31), Ag 3.52(9), Sb 20.22(12), S 10.80(8), total 99.66 wt.%, corresponding, on the basis of a total of 5 atoms, to (Tl1.87Ag0.19)Σ2.06Sb0.97S1.97. Biagioniite is monoclinic, space group Pc, with a = 11.0895(9), b = 14.3124(11), c = 7.9352(6) Å, β = 96.230(8)°, V = 1252.02(17) Å3 and Z = 8. The four strongest powder-diffraction lines [d in Å (I/I0) (hkl)] are: 3.56 (100) (310); 3.37 (75) ($\bar{2}$31); 3.79 (60) (012); 3.03 (60) (032). In the crystal structure [R1 = 0.024 for 2655 reflections with I > 2σ(I)], thallium adopts various coordinations extending from quasi-linear to quasi-tetrahedral. Antimony forms Sb–Sb pairs, which lead to the formula [Tl+1]4[Sb2]4+[S2–]4. Biagioniite is isostructural with dervillite, Ag2AsS2. The new mineral has been approved by the International Mineralogical Association Commission on New Minerals, Nomenclature and Classification (IMA2019–120) and named for Cristian Biagioni, Associate Professor of Mineralogy at the Department of Earth Sciences of the University of Pisa, Italy.

A nomenclature and classification scheme has been approved by IMA–CNMNC for the magnetoplumbite group, with the general formula A[B12]O19. The classification on the highest hierarchical level is decided by the dominant metal at the 12-coordinated A sites, at present leading to the magnetoplumbite (A = Pb), hawthorneite (A = Ba) and hibonite (A = Ca) subgroups. Two species remain ungrouped. Most cations, with valences from 2+ to 5+, show a strong order over the five crystallographic B sites present in the crystal structure, which forms the basis for the definition of different mineral species. A new mineral name, chihuahuaite, is introduced and replaces hibonite-(Fe).

Oxidation zones and mine wastes are metal-rich, near-surface environments, natural and man-made critical zones of ore deposits, respectively. They contain a number of minerals which, despite their metastability, occur consistently and in abundance. Field studies, presented as examples in this work, show that metastable minerals form not only directly from aqueous solutions, but also from more complex precursors, such as nanoparticles, gels, X-ray amorphous solids, or clusters. Initial precipitation of metastable phases and their conversion to stable phases is described by the Ostwald's step rule. Thermodynamic data show that there is a tendency, but no rule, that structurally more complex phases are also thermodynamically more stable. The Ostwald's step rule could then state that the initial metastable phases are structurally simple and easily assembled from aqueous solutions, nanoparticles, gels, disordered solids, or clusters. The structural similarity of the precursor and the forming phase is a kinetic factor favouring the crystallisation of the new phase. Calculation of saturation indices for mine drainage solutions show that they are mostly supersaturated with respect to the stable phases and the aqueous concentrations are sufficient to precipitate metastable minerals. In our fieldwork, we often encounter gelatinous substances with copper, manganese or tungsten that slowly convert to metastable oxysalt minerals. Another possibility is the crystallisation of various metastable minerals from solid, homogeneous ‘resins’ that are X-ray amorphous. Minerals typical for near-surface environments may be stabilised by their surface energy at high specific surface areas. For example, ferrihydrite is often described as a metastable phase but can be shown to be stable with respect to nanosised hematite.

A platina sample brought to Spain in the last quarter of the 18th century is nowadays exhibited at the National Museum of Natural Sciences in Madrid. It originated from the ancient Mineralogical Museum of the School of Applied Chemistry at El Turco Street in Madrid and most probably corresponds to the material used by François Chabaneau for his experiments to purify platinum metal in the late 18th century. The sample is a heavy-mineral concentrate consisting of Pt–Fe alloys and gold nuggets associated with ilmenite–hematite, chromian spinel, goethite and minor quartz, sphene, rutile, magnetite, hornblende, garnet, calcite, pyrite, native bismuth and bismite. The Pt–Fe alloys exhibit a characteristic composition (81.97–90.75 wt.% Pt and 5.08–10.81 wt.% Fe with minor amounts of Cu, Os, Ir, Ru, Rh and Pd) and mineralogy of solid inclusions (abundant inclusions of Ir alloy as well as Os alloy, laurite–erlichmanite, bowieite, tulameenite and undetermined Pt–Pd–Ir–Rh antimonides and tellurides) that are very similar to those Pt–Fe alloys currently mined in western Colombia (the Chocó Department). These features allow us to discuss the provenance of the sample (probably from the proximal or medial reaches of any of the Chocó rivers) and evaluate the suitability of the Chabaneau's method for purifying platina. Our results show that the method became effective only with platina samples depleted or lacking iridium.

The Huanglongpu carbonatites are located in the north-western part of the Qinling orogenic belt in central China. Calcite carbonatite dykes at the Dashigou open pit are unusual due to their enrichment in heavy rare earth elements (HREE) relative to light rare earth elements (LREE), leading to a flat REE pattern, and in that the majority of dykes have a quartz core. They also host economic concentrations of molybdenite. The calcite carbonatite dykes show two styles of mineralogy according to the degree of hydrothermal reworking, and these are reflected in REE distribution and concentration. The REE in the little-altered calcite carbonatite occur mostly in magmatic REE minerals, mainly monazite-(Ce), and typically have ΣLREE/(HREE+Y) ratios from 9.9 to 17. In hydrothermally altered calcite carbonatites, magmatic monazite-(Ce) is partially replaced to fully replaced by HREE-enriched secondary phases and the rocks have ΣLREE/(HREE+Y) ratios from 1.1 to 3.8. The fluid responsible for hydrothermal REE redistribution is preserved in fluid inclusions in the quartz lenses. The bulk of the quartz lacks fluid inclusions but is cut by two later hydrothermal quartz generations, both containing sulfate-rich fluid inclusions with sulfate typically present as multiple trapped solids, as well as in solution. The estimated total sulfate content of fluid inclusions ranges from 6 to >33 wt.% K2SO4 equivalent. We interpret these heterogeneous fluid inclusions to be the result of reaction of sulfate-rich fluids with the calcite carbonatite dykes. The final HREE enrichment is due to a combination of factors: (1) the progressive HREE enrichment of later magmatic calcite created a HREE-enriched source; (2) REE–SO42– complexing allowed the REE to be redistributed without fractionation; and (3) secondary REE mineralisation was dominated by minerals such as HREE-enriched fluorocarbonates, xenotime-(Y) and churchite-(Y) whose crystal structures tends to favour HREE.

Sulfur-bearing monazite-(Ce) occurs in silicified carbonatite at Eureka, Namibia, forming rims up to ~0.5 mm thick on earlier-formed monazite-(Ce) megacrysts. We present X-ray photoelectron spectroscopy data demonstrating that sulfur is accommodated predominantly in monazite-(Ce) as sulfate, via a clino-anhydrite-type coupled substitution mechanism. Minor sulfide and sulfite peaks in the X-ray photoelectron spectra, however, also indicate that more complex substitution mechanisms incorporating S2– and S4+ are possible. Incorporation of S6+ through clino-anhydrite-type substitution results in an excess of M2+ cations, which previous workers have suggested is accommodated by auxiliary substitution of OH– for O2–. However, Raman data show no indication of OH–, and instead we suggest charge imbalance is accommodated through F– substituting for O2–. The accommodation of S in the monazite-(Ce) results in considerable structural distortion that may account for relatively high contents of ions with radii beyond those normally found in monazite-(Ce), such as the heavy rare earth elements, Mo, Zr and V. In contrast to S-bearing monazite-(Ce) in other carbonatites, S-bearing monazite-(Ce) at Eureka formed via a dissolution–precipitation mechanism during prolonged weathering, with S derived from an aeolian source. While large S-bearing monazite-(Ce) grains are likely to be rare in the geological record, formation of secondary S-bearing monazite-(Ce) in these conditions may be a feasible mineral for dating palaeo-weathering horizons.

The Cretaceous Okorusu carbonatite, Namibia, includes diopside-bearing and pegmatitic calcite carbonatites, both exhibiting hydrothermally altered mineral assemblages. In unaltered carbonatite, Sr, Ba and rare earth elements (REE) are hosted principally by calcite and fluorapatite. However, in hydrothermally altered carbonatites, small (<50 µm) parisite-(Ce) grains are the dominant REE host, while Ba and Sr are hosted in baryte, celestine, strontianite and witherite. Hydrothermal calcite has a much lower trace-element content than the original, magmatic calcite. Regardless of the low REE contents of the hydrothermal calcite, the REE patterns are similar to those of parisite-(Ce), magmatic minerals and mafic rocks associated with the carbonatites. These similarities suggest that hydrothermal alteration remobilised REE from magmatic minerals, predominantly calcite, without significant fractionation or addition from an external source. Barium and Sr released during alteration were mainly reprecipitated as sulfates. The breakdown of magmatic pyrite into iron hydroxide is inferred to be the main source of sulfate. The behaviour of sulfur suggests that the hydrothermal fluid was somewhat oxidising and it may have been part of a geothermal circulation system. Late hydrothermal massive fluorite replaced the calcite carbonatites at Okorusu and resulted in extensive chemical change, suggesting continued magmatic contributions to the fluid system.

Eudialyte-group minerals (EGM) attract global interest as potential resources for high-field-strength elements (e.g. Zr, Nb, Ta, and rare-earth elements), i.e. critical materials for modern technologies. They are particularly valued for their relative enrichment in the most critical lanthanides, i.e. Nd and heavy rare earth elements (Gd–Lu). However, rare earth element (REE) substitution mechanisms into the EGM structure are still poorly understood. Light and heavy REE may occupy different sites and there may be ordering and/or defect clustering in the structure. This study uses X-ray absorption spectroscopy to determine the structural state of REE in EGM from prospective eudialyte-bearing complexes. Yttrium K-edge and Nd L3-edge spectra were collected as proxies for heavy and light REE, respectively, and compared to natural and synthetic REE-bearing standards. Extended X-ray absorption fine structure data yield best fits for Y in six-fold coordination with Y–O distances of 2.24–2.32 Å, and a second coordination sphere comprising Fe, Na, Ca, Si and O at radial distances of 3.6–3.8 Å. These findings are consistent with dominant Y3+ substitution for Ca2+ on the octahedral M1 site in all the samples studied, and exclude preferential substitution of Y3+ onto the smaller octahedral Z site or the large low-symmetry N4 site.

Using lattice strain theory, we constructed relative partitioning models to predict site preferences of lanthanides we have not measured directly. The models predict that all REE are favoured on the Ca-dominant M1 site and that preferential partitioning of heavy over light REE increases in EGM containing significant Mn in the M1-octahedral rings (oneillite subgroup). Thus, the flat REE profiles that make EGM such attractive exploration targets are not due to preferential partitioning of light and heavy REE onto different sites. Instead, local ordering of Mn- and Ca-occupied M1 sites may influence the capacity of EGM to accommodate heavy REE.

The Nuclear Decommissioning Authority (NDA) is developing a safety case for the long-term management of higher activity wastes. This includes safety assessments of transport to and operations at the repository. One of the main faults and hazards to be considered is waste package response to impact accidents.

The criteria of impact performance for waste packages are based upon activity release of particulates generated from the break up of the waste form during impact. The NDA approach to impact performance is based upon waste package response from finite element modelling in combination with break-up tests.

Previous break up research commissioned by the NDA has concentrated on commercial graphite and glass samples. These extended studies, undertaken by the National Nuclear Laboratory in collaboration with the Department of Aerosol Technology of the Fraunhofer Institute of Toxicology and Experimental Medicine, provide break-up data specific to nuclear facilities and waste materials. These include archived unirrradiated graphite used to construct Magnox reactor cores and reflectors, simulant high level waste glass, selected grout formulations and selected metal-in-grout formulations.

In situ atomic force microscopy (AFM) experiments were used to study the effect of trace amounts of a commercial inhibitor on the (001) baryte surface during growth. The additive tested was a copolymer, used as a scale inhibitor in oil recovery (maleic acid/allyl sulfonic acid copolymer with phosphonate groups, partial sodium salt). The morphology of the growth was used to gain a better understanding of the inhibition mechanism. Without an inhibitor, barium sulfate growth occurred by 2D island nucleation and spreading. The addition of a small amount (0.1 ppm and 0.5 ppm) of copolymer inhibitor enhances 2D nucleation but blocks growth. Just 1 ppm of inhibitor blocks nucleation and growth by adsorption of a copolymer layer onto the baryte surface. Similarly in 3D studies, small amounts of inhibitor seem to act on growth and not on nucleation and larger amounts of copolymer act on both by adsorption of the copolymer to all baryte surfaces keeping the particles in their embryo stage.

In support of the disposal system safety case for a geological disposal facility (GDF) there is a requirement to consider 'what-if' hypothetical scenarios for post-closure nuclear criticality. Although all such scenarios are considered very unlikely, one 'what-if' scenario is the mobilization of fissile material from a number of waste packages and its slow accumulation within the GDF or the immediate surroundings. Should sufficient fissile material accumulate a quasi-steady-state (QSS) transient criticality event could result. A computer model has been developed to understand the evolution and consequences of such an event.

Since a postulated QSS criticality could persist for many millennia, building confidence in the modelling approach is difficult. However, the Oklo natural reactors in Africa operated for similar durations around two billion years ago, providing a natural analogue for comparison. This paper describes the modelling approach, its application to hypothetical criticality events for a GDF, and how the model can be compared to Oklo. The model results are found to be in agreement with the observational evidence from Oklo, building confidence in the use of the QSS model to simulate postulated post-closure criticality events in GDFs.

Carbon-14 has been identified as one of the more significant radionuclides in solid radioactive wastes in a repository, due to the potential radiological impact arising if 14C were to be released and enter the biosphere. However, the assessment of radiation doses is complicated by the major role of carbon in biological processes, and this has tended to lead to the adoption of a cautious assessment approach.

An international comparison of five models used to predict uptake of 14C to agricultural crops has been undertaken, within the BIOPROTA framework. Processes investigated include conversion of 14C-labelled CH4 into CO2 in soils, carbon accumulation in and release from soil carbon pools, gaseous emanation to, and dispersion from, the plant canopy atmosphere and, incorporation into plants by photosynthesis.

For a unit rate of entry of 14C to soil, modelled activity concentrations in cereal crops differ by three to five orders of magnitude. This reflects, in part, differing assumptions for mixing and dispersion of air above the soil surface and within the crop canopy layer. For a unit activity concentration of 14C in air, the modelled uptake to cereal crops converges significantly. Following an assumed irrigation of crops with groundwater containing unit activity of 14C, the predicted uptake to crops varied by two to four orders of magnitude, again largely dominated by assumptions regarding the canopy atmosphere. In all cases, there is some convergence in model predictions as field size increases.

A continuing programme of field research is being undertaken in parallel with the assessment work.

In the UK, radioactive wastes currently planned for disposal in a geological disposal facility (GDF) are intermediate-level waste, some low-level waste and high-level waste. Disposal of other materials, including spent fuel, separated uranium and separated plutonium are also included in the planning of a GDF, if such materials are classified as wastes in the future. This paper gives an overview of the radionuclide behaviour research studies of the Nuclear Decommissioning Authority Radioactive Waste Management Directorate (NDA RWMD). The NDA RWMD's current understanding of the processes that control radionuclide behaviour in groundwater and how the engineered and natural barriers in a GDF would contain radionuclides is presented. Areas requiring further work are also identified.