Ontology deals with questions concerning what things exist, and how such things may be associated according to similarities and differences and related within a hierarchy. Ontology provides a rigorous way to develop a general definition of a mineral species. Properties may be divided into two principal groups: an intrinsic property is characteristic of the object and is independent of anything else; an extrinsic property depends on the relation between the object and other things. A universal is an entity that is common to all objects in a set. Here the objects are mineral samples, each entity is a specific property of these minerals, and the set of objects is all mineral samples of that mineral species. The key intrinsic properties of a mineral species are its name, its end-member formula and Z (the number of formula units in the unit cell), its space group and the bond topology of the end-member structure. These are also universals as they are common to all mineral samples belonging to that mineral species. An archetype is a pure form which embodies the fundamental characteristics of an object. Thus the archetype of a mineral species embodies the above set of universals. Real mineral samples of this mineral species are imperfect copies of that archetype, with a range of chemical composition defined by the boundaries between end-member formulae of this and other end members of the same bond topology. The result is a formal definition of a mineral species: A specific mineral species is the set of imperfect copies of the corresponding archetype and is defined by the following set of universals: name, end-member formula and Z, space group, and bond topology of the end-member structure, with the range of chemical composition limited by the compositional boundaries between end members with the same bond topology.

A gem-quality purplish-red tourmaline sample of alleged liddicoatitic composition from the Anjanabonoina pegmatite, Madagascar, has been fully characterised using a multi-analytical approach to define its crystal-chemical identity. Single-crystal X-ray diffraction, chemical and spectroscopic analysis resulted in the formula: X(Na0.41□0.35Ca0.24)Σ1.00Y(Al1.81Li1.00Fe3+0.04Mn3+0.02Mn2+0.12Ti0.004)Σ3.00ZAl6 [T(Si5.60B0.40)Σ6.00O18] (BO3)3 (OH)3W[(OH)0.50F0.13O0.37]Σ1.00 which corresponds to the tourmaline species elbaite having the typical space group R3m and relatively small unit-cell dimensions, a = 15.7935(4) Å, c = 7.0860(2) Å and V = 7.0860(2) Å3.

Optical absorption spectroscopy showed that the purplish-red colour is caused by minor amounts of Mn3+ (Mn2O3 = 0.20 wt.%). Thermal treatment in air up to 750°C strongly intensified the colour of the sample due to the oxidation of all Mn2+ to Mn3+ (Mn2O3 up to 1.21 wt.%). Based on infrared and Raman data, a crystal-chemical model regarding the electrostatic interaction between the X cation and W anion, and involving the Y cations as well, is proposed to explain the absence or rarity of the mineral species ‘liddicoatite’.

The margarosanite group (now officially confirmed by IMA-CNMNC) consists of triclinic Ca-(Ba, Pb) cyclosilicates with three-membered [Si3O9]6– rings (3R), with the general formula AB2Si3O9, where A = Pb, Ba and Ca and B = Ca. A closest-packed arrangement of O atoms parallel to (101) hosts Si and B cations in interstitial sites in alternating layers. The 3R layer has three independent Si sites in each ring. Divalent cations occupy three independent sites: Ca in B occupies two nonequivalent sites, Ca1 (8-fold coordinated), and Ca2 (6-fold coordinated). A (=Ca3) is occupied by Pb2+ (or Ba2+) in 6+4 coordination, or 6+1 when occupied by Ca; this third site occurs within the 3R-layer in a peripheral position. Three minerals belong to this group: margarosanite (ideally PbCa2Si3O9), walstromite (BaCa2Si3O9) and breyite (CaCa2Si3O9). So far, no solid solutions involving the Ca1 and Ca2 sites have been described. Therefore, root names depend on the composition of the Ca3 site only. Isomorphic replacement at the Ca3 sites has been noted. We here report data on a skarn sample from the Jakobsberg Mn–Fe oxide deposit, in Värmland, Sweden, representing intermediate compositions on the walstromite–margarosanite binary, in the range ca. 50–70% mol.% BaCa2Si3O9. The Pb-rich walstromite is associated closely with celsian, phlogopite, andradite, vesuvianite, diopside and nasonite. A crystal-structure refinement (R1 = 4.8%) confirmed the structure type, and showed that the Ca3 (Ba, Pb) site is split into two positions separated by 0.39 Å, with the Ba atoms found slightly more peripheral to the 3R-layers.

Beryl from Xuebaoding, Sichuan Province, western China is known for its unusual tabular habit and W–Sn–Be paragenesis in a greisen-type deposit. The crystals are typically colourless transparent to pale blue, often with screw dislocations of hexagonal symmetry on the (0001) crystal faces. Combining electron microprobe analyses and laser ablation inductively coupled plasma mass spectrometry with single-crystal X-ray diffraction (XRD), correlated with Raman and micro-infrared (IR) spectroscopy and imaging, the crystal chemical characteristics are determined. The contents of Na+ (0.24–0.38 atoms per formula unit (apfu)) and Li+ up to 0.38 apfu are at the high end compared to beryl from other localities worldwide. Li+ substitution for Be2+ on the tetrahedral (T2) site is predominantly charge balanced by Na+ on the smaller channel (C2) site, with Na+ ranging from 91.5% to 99.7% (apfu) of the sum of all other alkali elements. Cs+ and minor Rb+ and K+ primarily charge balance the minor M2+ substitution for Al3+ at the A site; all iron at the A site is suggested to be trivalent. The a axis ranges from 9.2161(2) to 9.2171(4) Å, with unit-cell volume from 678.03(3) to 678.48(7) Å3. The c/a ratio of 1.0002–1.0005 is characteristic for T2-type beryl with unit-cell parameters controlled primarily by Be2+ substitution. Transmission micro-IR vibrational spectroscopy and imaging identifies coordination of one or two water molecules to Na+ (type IIs and type IId, respectively) as well as alkali free water (type I). Based on IR absorption cross section and XRD a C1 site water content of 0.4–0.5 apfu is derived, i.e. close to 50% site occupancy. Secondary crystal phases with a decrease in Fe and Mg, yet increase in Na, suggest early crystallisation of aquamarine, with goshenite being late. With similar crystal chemistry to beryl of columnar habit from other localities worldwide, the tabular habit of Xuebaoding beryl seems to be unrelated to chemical composition and alkali content.

The weathering of platinum-group element (PGE) deposits presents unusual problems, especially in the very active environment of lateritic weathering under tropical conditions. There is clear evidence of the destruction of platinum-group minerals (PGM) to form PGE oxides, or fine intergrowths between relict PGM and iron oxides or hydroxides, as an intermediate stage during weathering. The PGE released by weathering are transported in solution with the more soluble Pd species remaining in solution and travelling further than the less soluble Pt species. The presence of PGM in the laterite differing in mineralogy, mineral assemblage and size from those in the primary rock is difficult to explain, especially when they show secondary textures. Differing interpretations have created controversy. Are alluvial PGM derived unaltered from the primary rock where they are rare and, therefore, not encountered by standard petrographic examination? Is it possible that they could have developed in the laterite by some process that we do not yet fully understand? Some favourable genetic conditions have been outlined and debated. For more than 100 years authors have reported secondary ore textures and recently proposed a biogenic origin. Frank Reith and his co-workers provided evidence of a process involving metallophillic bacteria which, for the first time, demonstrates PGM growth in the laboratory under supergene conditions. Their work shows that a mechanism for supergene growth (‘neoformation’) can occur, which offers a new field of study of the appropriate Eh, pH, $f_{{\rm O}_ 2}$ conditions and organic and bacterial reactions that could permit supergene growth.

Bosoite (IMA2014-023) is a new silica clathrate mineral containing hydrocarbon molecules in its crystal structure. Bosoite can be considered structurally as a silica analogue of the structure-H gas hydrate, where guest molecules are trapped in cage-like voids constructed of the host framework. The mineral occurs in the Miocene tuffaceous sedimentary rocks at Arakawa, Minami-boso City, Chiba Prefecture, Japan. Bosoite is hexagonal, and it crystallises as an epitaxial intergrowth on chibaite crystals, with the {0001} of bosoite parallel to octahedral {111} form of chibaite. Crystals are colourless and transparent with vitreous lustre. The calculated density is 2.04 g/cm3. The empirical formula (based on 2 O apfu and guest molecules assumed as CH4) is Na0.01(Si0.98Al0.02)Σ1.00O2⋅0.50CH4; the end-member formula is SiO2⋅nCxH2x+2. Bosoite has the space group P6/mmm, with the unit-cell parameters a = 13.9020(3) Å, c = 11.2802(2) Å, V = 1887.99(6) Å3 and Z = 34. The crystal structure of bosoite was refined by single-crystal X-ray diffraction and converged to R1 = 4.26% for the average model and R1 = 2.96% for the model where all oxygen sites are split.

Thermal behaviour of fibrous tremolite from Maryland, USA has been investigated in situ up to breakdown temperature. Tremolite can be found both as primary constituent and as contaminant in Asbestos Containing Materials (ACMs). The products of breakdown are subcalcic diopside and calcium-rich clinoenstatite in a 2:1 ratio, traces of hematite plus minor silica-rich amorphous material. Thermal expansion follows a regular trend up to 723 K before the onset of Fe2+ oxidation/OH– deprotonation which is completed at 1023 K. At 923 K the Fe3+ migration starts towards M(1) and the corresponding counter-migration of Mg to M(2) and M(3). At T close to structure breakdown, M(2) shows a significant site-scattering reduction possibly consistent with the occurrence of minor vacancies. In fully oxidised tremolite, Fe3+ is allocated prevalently at M(1) and subordinately at M(3). As it is well-known that M(1), along with M(2), is the most exposed octahedral site at the surface of amphiboles, most of the Fe3+ is available for participating in the Fenton-like reactivity of oxidised tremolite, potentially making it dangerous for human health. This point should be properly taken into account in the evaluation of the safety of thermally decomposed tremolite-containing ACMs, in particular in the case of accidentally incomplete treatments.

The assayers’ ingots recovered in 2014 from the SS Central America contain geochemical signatures and anomalies which convey information about the culture of miners and assayers in the late 1850s. A significant number of ingots (21%) contain elevated copper and zinc in the same ratio as a common brass alloy of the period, suggesting that adulteration of placer gold dust was a common issue. The ingots with the brass-like signature also have a gold fineness much lower than measured for typical California placer gold. Trace elements like palladium in uniform concentrations in all Kellogg & Humbert ingots suggest the use of quality high-temperature tools, while lead and tin in all ingots suggest specific contamination and industrial hygiene issues common to the whole industry. Other trace constituents such as arsenic, antimony and bismuth are likely to have originated from dense minerals associated with placer gold, or from the natural placer gold alloy itself. Comparison of modern analysis of ingots vs. assay values stamped on the ingots themselves suggests some firms like Kellogg & Humbert did superior assay work, while others like the San Francisco office of Justh & Hunter probably had issues with quality control. The variations in assay ingot alloy chemistry provide a window into this important period in American history.

A green tourmaline sample from the Tzarevskoye uranium–vanadium deposit, close to the Srednyaya Padma deposit, Lake Onega, Karelia Republic, Russia, has been found to be the second world-occurrence of Cr-rich vanadio-oxy-dravite in addition to the Pereval marble quarry, Sludyanka crystalline complex, Lake Baikal, Russia, type-locality. From the crystal-structure refinement and chemical analysis, the following empirical formula is proposed: X(Na0.96K0.02□0.02)Σ1.00Y(V1.34Al0.68Mg0.93Cu2+0.02Zn0.01Ti0.01)Σ3.00Z(Al3.19Cr1.36V0.03Mg1.42)Σ6.00(TSi6O18)(BBO3)3V(OH)3W[O0.60(OH)0.23F0.17]Σ1.00. Together with the data from the literature, a compositional overview of Al–V–Cr–Fe3+-tourmalines is provided by using [6]Al–V–Cr–Fe3+ diagrams for tourmaline classification. These diagrams further simplify the tourmaline nomenclature as they merge the chemical information over the octahedrally-coordinated sites (Y and Z) by removing the issues of uncertainty associated with cation order–disorder across Y and Z. Results show the direct identification of tourmalines by using the chemical data alone.

Thunderbayite (IMA2020–042), ideally TlAg3Au3Sb7S6, is a new mineral from the Hemlo gold deposit, Marathon, Ontario, Canada. It occurs as very rare anhedral rims up to 70 μm across in contact with aurostibite and associated spatially with stibarsen, biagioniite and native gold in a calcite matrix. Thunderbayite is opaque with a metallic lustre and shows a black streak. In reflected light, thunderbayite is weakly bireflectant and faintly pleochroic from grey–blue to slightly greenish grey–blue. Under crossed polars, it is weakly anisotropic with bluish to light-blue rotation tints. Internal reflections are absent. Reflectance percentages for the four Commission on Ore Mineralogy wavelengths (Rmin, Rmax) are: 37.9, 38.4 (471.1 nm); 35.3, 36.0 (548.3 nm); 33.9, 34.4 (586.6 nm); and 32.0, 32.5 (652.3 nm), respectively. A mean of five electron-microprobe analyses gave Ag 14.91(16), Au 27.40(22), Tl 9.37(9), Sb 39.80(34) and S 8.61(7), for a total of 100.09 wt.%, corresponding, on the basis of a total of 20 atoms, to Tl1.00Ag3.01Au3.03Sb7.12S5.84. Thunderbayite is triclinic, space group P1, with a = 8.0882(5), b = 7.8492(5), c = 20.078(1) Å, α = 92.518(5), β = 93.739(5), γ = 90.028(6)°, V = 1270.73(9) Å3 and Z = 2. The five strongest powder-diffraction lines [d in Å (I/I0) (hkl)] are: 4.04 (100) (200); 3.92 (80) (020); 2.815 (50) (220/$\bar{2}$20); 2.566 (45) ($\bar{1}$17); and 2.727 (40) (0$\bar{1}$7). The crystal structure [R1 = 0.0220 for 5521 reflections with I > 2σ(I)] can be considered as a strongly deformed pyrite-type structure with several metal–metal bonds. Thunderbayite shows close similarities with criddleite, TlAg2Au3Sb10S10, from an optical, chemical and structural point of view. The new mineral is named for the Thunder Bay district, Ontario, in which the Hemlo gold deposit is located.

The Open Access movement has gathered significant momentum over the last couple of years. This has been instigated largely by cOAlition S and those funders which support its aims. Is ‘Read and Publish’ the way forward? Will it work for all publishers? All authors? All subscribers? All readers? This article looks at the history of OA and updates a similar piece from 2013. A detailed glossary of terms is given at the end of the article.

Alstonite, BaCa(CO3)2, is a mineral described almost two centuries ago. It is widespread in Nature and forms magnificent cm-sized crystals. Notwithstanding, its crystal structure was still unknown. Here, we report the crystal-structure determination of the mineral and discuss it in relationship to other polymorphs of BaCa(CO3)2. Alstonite is trigonal, space group P31m, with unit-cell parameters a = 17.4360(6), c = 6.1295(2) Å, V = 1613.80(9) Å3 and Z = 12. The crystal structure was solved and refined to R1 = 0.0727 on the basis of 4515 reflections with Fo > 4σ(Fo) and 195 refined parameters. Alstonite is formed by the alternation, along c, of Ba-dominant and Ca-dominant layers, separated by CO3 groups parallel to {0001}. The main take-home message is to show that not all structure determinations of minerals/compounds can be solved routinely. Some crystals, even large ones displaying excellent diffraction quality, can be twinned in complex ways, thus making their study a crystallographic challenge.

Khademite, ideally Al(SO4)F(H2O)5, from the Monte Arsiccio mine, Apuan Alps, Tuscany, Italy, has been characterised through quantitative electron microprobe analysis, micro-Raman spectroscopy and single-crystal X-ray diffraction. Khademite occurs as colourless to whitish tabular crystals, up to 5 mm. Electron microprobe analysis (in wt.%, average of 20 spot analyses) gave: SO3 35.43, Al2O3 21.27, F 6.92, H2Ocalc 39.73, sum 103.35, –O = F 2.92, total 100.43. On the basis of 10 anions per formula unit, assuming the occurrence of 5 H2O groups and 1 (F+OH) atom per formula unit, its chemical formula can be written as Al0.96S1.02O4[F0.84(OH)0.16]Σ1.00⋅5H2O. The Raman spectrum of khademite is characterised by the occurrence of vibrational modes of SO4 groups and by broad and strong bands due to the O–H stretching modes. Khademite is orthorhombic, space group Pcab, with unit-cell parameters a = 11.1713(2), b = 13.0432(3), c = 10.8815(2) Å, V = 1585.54(5) Å3 and Z = 8. The crystal structure refinement converged to R1 = 0.0293 on the basis of 2359 unique reflections with Fo > 4σ(Fo) and 152 refined parameters. The crystal structure of khademite is characterised by the alternation, along b, of two distinct kinds of {010} layers, one formed by [001] rows of isolated Al-centred octahedra, connected to each other through H bonds, and the other showing isolated SO4 groups. Along b, oxygen atoms belonging to SO4 groups act as acceptor of H bonds from H2O groups coordinating Al atoms. The new data improved the description of the H bonds in khademite and led us to discuss about the possible existence of its (OH)-analogue, rostite. In addition, Raman spectroscopic data were collected on the same crystal used for the crystal-chemical characterisation, allowing a comparison with previous results.

The new mineral isselite, Cu6(SO4)(OH)10(H2O)4⋅H2O, has been discovered in the Lagoscuro mine, Monte Ramazzo mining complex, Genoa, Eastern Liguria, Italy. It occurs as sprays of blue acicular crystals, up to 0.1 mm long, associated with brochantite and posnjakite. Streak is light blue and the lustre is vitreous. Isselite is brittle, with irregular fracture and good cleavage on {001} and {100}. Measured density is 3.00(2) g/cm3. Isselite is optically biaxial (–), with α = 1.599(2), β = 1.633(2) and γ = 1.647(2) (determined in white light). The measured 2V is 63.6(5)°. Dispersion is moderate, with r > v. The optical orientation is X = b, Y = c and Z = a. Isselite is pleochroic, with X = light blue, Y = blue, Z = blue; X << Z < Y. Electron microprobe analyses give (wt.%): SO3 11.45(21), MgO 0.31(7), CoO 1.07(14), NiO 9.41(90), CuO 51.29(126), ZnO 1.10(20), H2Ocalc 24.21, total 98.84. The empirical formula of isselite, based on Σ(Mg,Co,Ni,Cu,Zn) = 6 atoms per formula unit, is (Cu4.80Ni0.94Co0.11Zn0.10Mg0.06)Σ6.00(S1.06O4.19)(OH)10⋅5H2O. Isselite is orthorhombic, space group Pmn21, with unit-cell parameters a = 6.8070(14), b = 5.8970(12), c = 20.653(4) Å, V = 829.0(3) Å3 and Z = 2. The crystal structure of isselite was refined from single-crystal X-ray diffraction data to R1 = 0.067 on the basis of 2964 reflections with Fo > 4σ(Fo). It shows a layered structure formed by zig-zag {001} layers of Cu-centred polyhedra. Sulfate groups occur in the interlayer along with one H2O group. Isselite is chemically related to redgillite and montetrisaite.

The crystal structure of pyrostilpnite from the Plaka mine, Lavrion Mining District, Greece, was refined in the space group P21/c to a final R1 index of 0.0283 on the basis of 2047 reflections with Fo > 4σ(Fo) and 65 refined parameters. Unit-cell parameters of the crystal examined are a = 6.8629(6), b = 15.8800(14), c = 6.2711(5) Å, β = 117.087(2)°, V = 608.48(9) Å3 and Z = 4. Chemical data agree with the stoichiometric formula Ag3SbS3. The crystal structure reported previously was confirmed, although a higher precision of refinement was achieved. It can be described as formed by {010} slabs running along c and connected along a through relatively longer Ag–S bonds. The analysis of the atomic displacement parameters together with a refinement with higher order tensors in the expression of the structure factors revealed no hint for pyrostilpnite as an ionic conductor. A historical background of the ‘ruby silvers’ is also reported.

Tetrahedrite-(Hg), Cu6(Cu4Hg2)Sb4S13, has been approved as a new mineral species using samples from Buca della Vena mine (hereafter BdV), Italy, Jedová hora (Jh), Czech Republic and Rožňava (R), Slovakia. It occurs as anhedral grains or as tetrahedral crystals, black in colour, with metallic lustre. At BdV it is associated with cinnabar and chalcostibite in dolomite veins. At Jh, tetrahedrite-(Hg) is associated with baryte and chalcopyrite in quartz–siderite–dolomite veins; at R it is associated with quartz in siderite–quartz veins. Tetrahedrite-(Hg) is isotropic, greyish-white in colour, with creamy tints. Minimum and maximum reflectance data for Commission on Ore Mineralogy wavelengths in air (BdV sample), R in %) are 32.5 at 420 nm; 32.9 at 546 nm; 33.2 at 589 nm; and 30.9 at 650 nm. Chemical formulae of the samples studied, recalculated on the basis of 4 (As + Sb + Bi) atoms per formula unit, are: (Cu9.44Ag0.07)Σ9.51(Hg1.64Zn0.36Fe0.06)Σ2.06Sb4(S12.69Se0.01)Σ12.70 (BdV), Cu9.69(Hg1.75Fe0.25Zn0.06)Σ2.06(Sb3.94As0.06)S12.87 (Jh) and (Cu9.76Ag0.04) Σ9.80(Hg1.83Fe0.15Zn0.10)Σ2.08(Sb3.17As0.58Bi0.25)S13.01 (R). Tetrahedrite-(Hg) is cubic, I$\overline 4 $3m, with a = 10.5057(8) Å, V = 1159.5(3) Å3 and Z = 2 (BdV). Unit-cell parameters for the other two samples are a = 10.4939(1) Å and V = 1155.61(5) Å3 (Jh) and a = 10.4725(1) Å and V = 1148.55(6) Å3 (R). The crystal structure of tetrahedrite-(Hg) has been refined by single-crystal X-ray diffraction data to a final R1 = 0.019 on the basis of 335 reflections with Fo > 4σ(Fo) and 20 refined parameters. Tetrahedrite-(Hg) is isotypic with other members of the tetrahedrite group. Mercury is hosted at the tetrahedrally coordinated M(1) site, along with minor Zn and Fe. The occurrence of Hg at this position agrees both with the relatively large M(1)–S(1) bond distance (2.393 Å) and the refined site scattering. Previous occurrences of Hg-rich tetrahedrite and tetrahedrite-(Hg) are reviewed, and its relations with other Hg sulfosalts are discussed.

Langhofite, ideally Pb2(OH)[WO4(OH)], is a new mineral from the Långban mine, Värmland, Sweden. The mineral and its name were approved by the International Mineralogical Association Commission on New Minerals, Nomenclature and Classification (IMA2019-005). It occurs in a small vug in hematite–pyroxene skarn associated with calcite, baryte, fluorapatite, mimetite and minor sulfide minerals. Langhofite is triclinic, space group P$\bar{1}$, and unit-cell parameters a = 6.6154(1) Å, b = 7.0766(1) Å, c = 7.3296(1) Å, α = 118.175(2)°, β = 94.451(1)°, γ = 101.146(1)° and V = 291.06(1) Å3 for Z = 2. The seven strongest Bragg peaks from powder X-ray diffractometry are [dobs, Å (I)(hkl)]: 6.04(24)(010), 3.26(22)(11$\bar{2}$), 3.181(19)(200), 3.079(24)(1$\bar{1}$2), 3.016(100)(020), 2.054(20)(3$\bar{1}$1) and 2.050(18)(13$\bar{2}$). Langhofite occurs as euhedral crystals up to 4 mm, elongated along the a axis, with lengthwise striation. Mohs hardness is ca. 2½, based on VHN25 data obtained in the range 130–192. The mineral is brittle, with perfect {010} and {100} cleavages. The calculated density based on the ideal formula is 7.95(1) g⋅cm–3. Langhofite is colourless to white (non-pleochroic) and transparent, with a white streak and adamantine lustre. Reflectance curves show normal dispersion, with maximum values 15.7–13.4% within 400–700 nm. Electron microprobe analyses yield only the metals Pb and W above the detection level. The presence of OH-groups is demonstrated with vibration spectroscopy, from band maxima present at ~3470 and 3330 cm–1. A distinct Raman peak at ca. 862 cm–1 is related to symmetric W–oxygen stretching vibrations. The crystal structure is novel and was refined to R = 1.6%. It contains [W2O8(OH)2]6– edge-sharing dimers (with highly distorted WO6-octahedra) forming chains along [101] with [(OH)2Pb4]6+ dimers formed by (OH)Pb3 triangles. Chains configure (010) layers linked along [010] by long and weak Pb–O bonds, thus explaining the observed perfect cleavage on {010}. The mineral is named for curator Jörgen Langhof (b. 1965), who collected the discovery sample.

Biagioniite, ideally Tl2SbS2, is a new mineral from the Hemlo gold deposit, Marathon, Ontario, Canada. It occurs as very rare anhedral crystals up to 65 μm across associated with aurostibite, stibarsen and native gold in a calcite matrix. Biagioniite is opaque with a metallic lustre and shows a black streak. In reflected light biagioniite is moderately bireflectant and not pleochroic. Under crossed polars it is weakly anisotropic with blueish to light-blue rotation tints. Internal reflections are absent.

Reflectance percentages for the four standard wavelengths (Rmin and Rmax) are 35.9 and 37.5 (471.1 nm); 34.7 and 36.2 (548.3 nm); 33.8 and 35.3 (586.6 nm); and 31.5 and 33.7 (652.3 nm), respectively. A mean of four electron microprobe analyses gave: Tl 65.12(31), Ag 3.52(9), Sb 20.22(12), S 10.80(8), total 99.66 wt.%, corresponding, on the basis of a total of 5 atoms, to (Tl1.87Ag0.19)Σ2.06Sb0.97S1.97. Biagioniite is monoclinic, space group Pc, with a = 11.0895(9), b = 14.3124(11), c = 7.9352(6) Å, β = 96.230(8)°, V = 1252.02(17) Å3 and Z = 8. The four strongest powder-diffraction lines [d in Å (I/I0) (hkl)] are: 3.56 (100) (310); 3.37 (75) ($\bar{2}$31); 3.79 (60) (012); 3.03 (60) (032). In the crystal structure [R1 = 0.024 for 2655 reflections with I > 2σ(I)], thallium adopts various coordinations extending from quasi-linear to quasi-tetrahedral. Antimony forms Sb–Sb pairs, which lead to the formula [Tl+1]4[Sb2]4+[S2–]4. Biagioniite is isostructural with dervillite, Ag2AsS2. The new mineral has been approved by the International Mineralogical Association Commission on New Minerals, Nomenclature and Classification (IMA2019–120) and named for Cristian Biagioni, Associate Professor of Mineralogy at the Department of Earth Sciences of the University of Pisa, Italy.

A nomenclature and classification scheme has been approved by IMA–CNMNC for the magnetoplumbite group, with the general formula A[B12]O19. The classification on the highest hierarchical level is decided by the dominant metal at the 12-coordinated A sites, at present leading to the magnetoplumbite (A = Pb), hawthorneite (A = Ba) and hibonite (A = Ca) subgroups. Two species remain ungrouped. Most cations, with valences from 2+ to 5+, show a strong order over the five crystallographic B sites present in the crystal structure, which forms the basis for the definition of different mineral species. A new mineral name, chihuahuaite, is introduced and replaces hibonite-(Fe).

Oxidation zones and mine wastes are metal-rich, near-surface environments, natural and man-made critical zones of ore deposits, respectively. They contain a number of minerals which, despite their metastability, occur consistently and in abundance. Field studies, presented as examples in this work, show that metastable minerals form not only directly from aqueous solutions, but also from more complex precursors, such as nanoparticles, gels, X-ray amorphous solids, or clusters. Initial precipitation of metastable phases and their conversion to stable phases is described by the Ostwald's step rule. Thermodynamic data show that there is a tendency, but no rule, that structurally more complex phases are also thermodynamically more stable. The Ostwald's step rule could then state that the initial metastable phases are structurally simple and easily assembled from aqueous solutions, nanoparticles, gels, disordered solids, or clusters. The structural similarity of the precursor and the forming phase is a kinetic factor favouring the crystallisation of the new phase. Calculation of saturation indices for mine drainage solutions show that they are mostly supersaturated with respect to the stable phases and the aqueous concentrations are sufficient to precipitate metastable minerals. In our fieldwork, we often encounter gelatinous substances with copper, manganese or tungsten that slowly convert to metastable oxysalt minerals. Another possibility is the crystallisation of various metastable minerals from solid, homogeneous ‘resins’ that are X-ray amorphous. Minerals typical for near-surface environments may be stabilised by their surface energy at high specific surface areas. For example, ferrihydrite is often described as a metastable phase but can be shown to be stable with respect to nanosised hematite.