Cellular adhesion depends on the integration of numerous signaling inputs generated by the chemical and physical properties of the substrate. The complex coupling among inputs makes it challenging experimentally to deconvolve their individual contributions to the adhesion process. To address this roadblock, we have employed a combination of electron beam and optical lithographic techniques to fabricate substrates with independently tunable topographical and chemical signaling cues. Arrays of gold nanostructures were patterned atop quartz substrates, half of which were etched into gold-capped nanopillars. Individual A549 cells exposed simultaneously to Arg-Gly-Asp-functionalized etched and non-etched arrays exhibited strongly preferential adherence to the nanopillars.

Hyperbolic polariton modes are highly appealing for a broad range of applications in nanophotonics, including surfaced enhanced sensing, sub-diffractional imaging, and reconfigurable metasurfaces. Here we show that attenuated total reflectance (ATR) micro-spectroscopy using standard spectroscopic tools can launch hyperbolic polaritons in a Kretschmann–Raether configuration. We measure multiple hyperbolic and dielectric modes within the naturally hyperbolic material hexagonal boron nitride as a function of different isotopic enrichments and flake thickness. This overcomes the technical challenges of measurement approaches based on nanostructuring, or scattering scanning near-field optical microscopy. Ultimately, our ATR approach allows us to compare the optical properties of small-scale materials prepared by different techniques systematically.

The fire-retardant and water-repellent bio-structural panels (BISPs) were successfully developed using cellulose nanofibrils, corn starch, boric acid, and n-dodecenyl succinic anhydride with adhesive-free character. Its performance properties were evaluated and compared with other well-known products on the market. The BISP's density (0.1 g/cm3) and permeance value [41.81 g/day/m2 with 5.76% coefficient of variation (CV)] were found higher than compared competitor products. The BISPs' contact angle was found 132.13° (1.59% CV) for BISP. The BISP was the only fire-retardant product, and the only one developed almost no smoke 2.20%.

High-performance electrochemical hydrogen peroxide (H2O2) sensors based on PdAg nanoparticle-decorated reduced graphene oxide (rGO) and multi-walled carbon nanotube (MWCNT) hybrids were developed. The nanostructures were characterized using transmission electron microscopy, scanning electron microscopy, energy-dispersive spectroscopy, thermogravimetric analysis, Fourier transform spectroscopy, and x-ray diffraction techniques. It was found that introduction of MWCNT in the catalyst layer improved the sensitivity and widened the linear range. Sensitivities of 393.2, 437.1, and 576.6 µA/mM/cm2 were obtained for PdAg/rGO–MWCNT (2:1), PdAg/rGO–MWCNT (1:1), and PdAg/rGO–MWCNT (1:2), respectively. Furthermore, hierarchical structure of rGO–MWCNT nanohybrids enabled the detection of H2O2 up to 80 mM.

In this study, the formation solid solutions of titanium dioxide- zirconium dioxide (TiO2-ZrO2) system with the supercritical fluid method is described. The particles of solid solutions in the TiO2-ZrO2 system are spherical and form agglomerates, they are amorphous and have a size from 90 to 850 nm. The X-ray patterns of samples calcined above the temperatures of crystallization (450 °C) and phase transition (750 °C) demonstrate the decomposition of the solid solutions above the crystallization temperature and formation of phases in accordance with phase ratios in the TiO2-ZrO2 system at these temperatures. The formation solid solutions of the starting materials are observed in all region of concentrations.

In this study, we performed computational simulations to extend the behavior knowledge over molecular systems composed by amylose oligomers, three fatty acids often found in Brazilian vegetable oils, water solvent, and montmorillonite. The focus is directed to the molecular movement and to intra and intermolecular interactions, each simulation step being compared with the literature's experimental profile. The calculations were mostly performed by Molecular Mechanics and Dynamics methods. The excellent agreement and complementarities with the literature results indicate, once again, the important contribution offered by the computational simulations to the design of new polymer–clay nanocomposites with biopolymers.

Electrically conducting substrates have shown much promise as neuronal scaffolds and in other biologic and biomedical applications where a smart and electrically interactive material is needed. Most materials that are inherently conducting are not suitable for biomedical applications and lack biocompatibility or biostability. On the other hand, biologically stable and compatible materials must first be manipulated, modified, and treated in order to impart the necessary electrical conductivity to the material. Here, the authors have investigated the response of PC-12 cells to two types of conducting carbon-based aerogels with different surface roughness. Results show that carbon-based aerogels support cell adhesion, proliferation, and neurite extension. The effects of surface roughness have also been investigated.

Herein we describe the use of a new DNAzyme/graphene hybrid material as a biointerfaced sensing platform for optical detection of pathogenic bacteria. The hybrid consists of a colloidal graphene nanomaterial and an Escherichia coli-activated RNA-cleaving DNAzyme and is prepared via non-covalent self-assembly of the DNAzyme onto the graphene surface. Exposure of the hybrid material to E. coli-containing samples results in the release of the DNAzyme, followed by the cleavage-mediated production of a fluorescent signal. Given that specific RNA-cleaving DNAzymes can be created for diverse bacterial pathogens, direct interfacing of graphene materials with such DNAzymes represents a general and attractive approach for real-time, sensitive, and highly selective detection of pathogenic bacteria.

The preparation, screening, and characterization of affinity membranes require a deep knowledge of the behavior of all components of the affinity material. Several studies report the effect of different spacers in combination with the ligand molecule, but the effect of the spacer arm “per se” is generally disregarded. The effect of the spacer 1,2-diaminoethane on non-specific protein adsorption was recently investigated and the results were compared with the ones obtained with A2P affinity membranes. The results show that this spacer has indeed an important effect and that similar specific studies need to be performed for every spacer molecule.

Metal–graphene composites are sought after for various applications. A hybrid light-weight foam of nickel (Ni) and reduced graphene oxide (rGO), called Ni-rGO, is reported here for small molecule oxidations and thereby their sensing. Methanol oxidation and non-enzymatic glucose sensing are attempted with the Ni-rGO foam via electrocatalytically, and an enhanced methanol oxidation current density of 4.81 mA/cm2 is achieved, which is ~1.7 times higher than that of bare Ni foam. In glucose oxidation, the Ni-rGO electrode shows a better sensitivity over bare Ni foam electrode where it could detect glucose linearly over a concentration range of 10 µM to 4.5 mM with a very low detection limit of 3.6 µM. This work demonstrates the synergistic effects of metal and graphene in oxidative processes, and also shows the feasibility of scalable metal–graphene composite inks development for small molecule printable sensors and fuel cell catalysts.

Millions of micro electro mechanical system sensors are fabricated each year using an ultra-clean process that allows for a vacuum-encapsulated cavity. These devices have a multi-layer structure that contains hidden layers with highly doped silicon, which makes common imaging techniques ineffective. Thus, examining device features post-fabrication, and testing, is a significant challenge. Here, we use a combination of micro- and nano-scale x-ray computed tomography to study device features and assess failure mechanisms in such devices without destroying the ultra-clean cavity. This provides a unique opportunity to examine surfaces and trace failure mechanisms to specific steps in the fabrication process.

An epitaxial NdFeAs(O,F) thin film of 90 nm thickness grown by molecular beam epitaxy on MgO single crystal with Tc = 44.2 K has been investigated regarding a possible vortex glass–liquid transition. The voltage–current characteristics show excellent scalability according to the vortex-glass model with a static critical exponent ν of around 1.35 and a temperature-dependent dynamic exponent z increasing from 7.8 to 9.0 for the investigated temperature range. The large and non-constant z values are discussed in the frame of 3D vortex glass, thermally activated flux motion, and inhomogeneity broadening.

Graphene-based electronic DNA sequencing techniques have received significant attention over the past decade and are hoped to provide a new generation of portable, low-cost devices capable of rapid and accurate DNA sequencing. However, these devices are yet to demonstrate DNA sequencing. This is partly due to complex fabrication requirements resulting in low device yields and limited throughput. In this paper, we review the challenging fabrication of graphene-based electronic DNA sequencing devices. We will place a particular focus on common fabrication challenges and look toward the development of high-throughput, high-yield fabrication of these devices.

Significant progress in nanoscience was achieved through the development of methods and instruments to better comprehend nanoscale properties. We present here a methodology and automated setup to measure layer-by-layer films capacitance in the air immediately after polyelectrolytes adsorption. It presents high accuracy (~0.01 pF) to check the capacitance stabilization during spontaneous drying process in the air, with sensitivity to show electrical signal alternation accordingly to the outermost polyelectrolyte layer. Besides, a linear trend in capacitance was observed similar to UV–vis measurements. This method allows analyzing films electrical properties, affording better choice of materials, thickness, and molecular architecture.

This paper presents thermal properties’ characterization of calcium chloride hexahydrate as a phase change material (PCM) combined with boron nitride nanoparticles (BNNPs), leading to efficient thermal management. BNNPs have high-thermal conductivity up to 200 W/m K. Therefore, the thermal conductivity of PCM could be remarkably enhanced by adding BNNPs to improve the heat transfer performance. In this study, 0.5 wt% of BNNPs were dispersed in the molten PCM. It has been found that the BNNPs could enhance the thermal conductivity of PCM by 71.9%, while reduce the latent heat of fusion and specific heat of PCM by 11.1% and 60.9%, respectively.

We have developed a novel, facile, and reproducible synthesis of highly crystalline oleylamine-capped colloidal platinum nanocubes by microwave (MW) heating. Use of MW heating decreases reaction times, eliminates the need for dangerous reagents [e.g., Fe(CO)5], and gives efficient production of monodispersed 8 nm Pt nanocubes [MW-nanoparticles (NPs)]. We also present a study of the optical properties of these NPs, which to our knowledge has not been previously reported. Absorbance spectra of the MW-NPs show a distinct localized surface plasmon resonance band at 213 nm. This observation could be significant for developments in plasmonic photocatalysis and advanced catalytic materials.

Perovskite materials are sensitive to environmental conditions. Here we report the synthesis and characterization of a hydrophobic alkylammonium lead(II) iodide perovskite with enhanced stability in water. Water stability was achieved by growing a shell of 4-[(N-3-butyne)carboxyamido]anilinium lead(II) iodide over methylammonium lead(II) iodide. As a proof of concept, the water-splitting reaction was performed using our new material coated on TiO2, and a 7-fold increase in applied bias photon-to-current efficiency was observed as compared with standard p25-TiO2. Such simple and versatile chemical modification to induce high water stability is useful toward exploring new applications for the perovskite materials.

Lattice resonances in nanoparticle arrays recently have gained a lot of attention because of the possibility to produce spectrally narrow resonant features in transmission and reflection as well as significantly increase absorption in the structures. Most of the efforts so far have been put to study these lattice resonances in dipole approximation. However, the recent research shows that higher multipoles not only produce resonant feature but are also involved in cross-coupling, affect each other, and induce a magnetoelectric response. In the present paper, we review the recent achievements in studying interplay and coupling of different multipoles in periodic nanoparticle arrays and share our vision on further progress of the field.

Modeling static and dynamic contact angles is a great challenge in studying wetting and de-wetting. We propose a new slip boundary model based on the Navier–Stokes equations, and establish a realistic continuum approach to simulate the contact line dynamics in 3-D. To validate our model, a water droplet interacting with micrometer-sized patterns of a hybrid hydro-phobic/-philic surface is studied numerically and compared with experimental measurements. Good agreement has been observed with four pillar spacings in the static, receding, and advancing modes. Moreover, details of the droplet–surface interaction are revealed, i.e., penetrations, sagging, local, and global contact angles.

The main challenges of developing advanced surface-enhanced Raman spectroscopy (SERS) sensors lie in the poor reproducibility, low uniformity, and the lack of molecular selectivity. In this paper, we report a facile and cost-effective approach for the large-scale patterning of graphene-encapsulated Au nanoparticles on Si substrate as efficient SERS sensors with highly-improved uniformity, reproducibility, and unique selectivity. The materials production was accomplished via an industry-applicable galvanic deposition—annealing—chemical vapor deposition approach, followed by a final plasma treatment. Our study provides a facile approach to the fabrication of uniform SERS substrate and further prompts the practical progress of SERS-based chemical sensors.