Hexavalent chromium (Cr6+) is a toxic carcinogenic pollutant that might be released by the mining and processing of ultramafic rocks and nickel laterites and which requires permanent removal from the contaminated biosphere. Ultramafic material can also serve as a feedstock for the sequestration of CO2 resulting from the growth of new minerals, raising the intriguing proposition of integrated sequestration of both pollutants, CO2 and chromium, into magnesium carbonates. Such a synergistic process downstream of ore recovery and mineral processing could be an elegant proposition for more sustainable utilisation and management of the Earth's resources. We have therefore carried out an experimental and microanalytical study to investigate potentially suitable carbonate minerals. Uptake of chromium in carbonate phases was determined, followed by identification of the crystalline phases and characterisation of the local structural environment around the incorporated chromium centres. The results suggest that neither nesquehonite nor hydromagnesite have the structural capacity to incorporate Cr6+ or Cr3+ significantly at room temperature. We therefore propose that further research into this technology should focus on laboratory assessments of other phases, such as layered double hyroxides, that have a natural structural capacity to uptake both chromium and CO2.

Watanabeite from the Pefka epithermal deposit, northeastern Greece, was examined using single-crystal X-ray diffraction and electron microprobe analysis. The empirical formula of watanabeite is Cu3.93Fe0.10Ag0.01Pb0.23As1.55Sb0.19S4.99. This mineral is orthorhombic, space group Amm2, with unit-cell parameters a = 10.9601(5), b = 14.6498(8), c = 10.3001(5) Å, V = 1653.82(14) Å3 and Z = 8. The crystal structure was solved and refined to R1 = 0.0471 for 2108 unique reflections with Fo > 4σ(Fo) and 123 refined parameters. The crystal structure of watanabeite can be described as a three-dimensional framework of Cu-centred tetrahedra; cavities of the tetrahedral scaffolding host Cu6S and As2(Pb,Sb,As)2S7 clusters. On the basis of structural data, the formula of watanabeite could be written as [III]Cu3[IV]Cu5As3(Pb,Sb,As)S10 (Z = 4), considering the three independent three-fold Cu sites and the three independent tetrahedrally coordinated Cu sites as aggregated positions. The occurrence of Pb2+ in watanabeite is probably related to the substitution Cu+ + (As,Sb)3+ = 2Me2+, where Me = Pb, Fe, Zn and formally divalent Cu. The relationships with tetrahedrite-group minerals are discussed on the basis of the refined structural model, highlighting possible crystal chemical implications of such relationships.

Kristjánite, KNa2H(SO4)2, is a new mineral (IMA2022–131) found in a high-temperature fumarole on Fimmvörðuháls, Iceland. It is monoclinic, P21/n, a = 6.9625(1), b = 9.9953(1), c = 11.0928(2) (Å), β = 105.637(2)° and V = 743.40(2) Å3. Kristjánite forms colourless transparent crystals up to ~100 μm in size in compact aggregates with metathénardite, belomarinaite, aphthitalite, ivsite and an unknown mineral with tentative composition K2NaH(SO4)2, or grows in white globules of smaller grains on their surface. The eight strongest maxima in a powder X-ray diffraction diagram are [d, Å (Intensity)] 4.37 (59), 3.65 (32), 3.48 (78), 3.36 (100), 3.18 (76), 2.83 (43), 2.73 (38) and 2.405 (23). The mineral represents a novel crystal structure type. In it, K is coordinated by eight O atoms, and two symmetrically independent Na atoms by seven O atoms. Two symmetrically independent S atoms are in tetrahedral coordination by O atoms. A close to linear, very short hydrogen bond (2.44 Å), connects the two to a SO4–H–SO4 dimer. K and Na coordination polyhedra share vertices, edges and even faces forming with sulfate tetrahedra a tight structure with narrow [100] channels lined on two opposite sides by hydrogen bonds.

This study describes a new variety of chalcedony with a unique inhomogeneous bluish green hue, named aquaprase. It was discovered in Africa and is considered to be a valuable addition to the gem trade. A multi-methodological approach was used to examine its chemistry, mineralogy and microstructure, which were then compared to those of chrysoprase and agate, two of the most popular varieties of chalcedony. Optical microscopy revealed a complex microstructural heterogeneity in the different colour intensity areas/bands of aquaprase and agate, whereas chrysoprase exhibited a more homogeneous coexistence of micro- and cryptocrystalline quartz. High-resolution synchrotron XRD was essential for highlighting the complex assemblage of various types of α-quartz in aquaprase and agate (which differ in terms of crystal size and/or cell parameters). Micro-Raman spectroscopy revealed α-quartz and moganite in all three varieties of chalcedony and the presence of the nickel-bearing layered silicate mineral, willemseite, in chrysoprase, which is responsible for its green colouration. The chemical analysis displayed a homogeneous composition of agate, as well as high levels of nickel content in the chrysoprase variety. Aquaprase showed significant amounts (ppm by weight) of trace elements (Al, Mg, Na, K, Ca, Ti, U and Fe) characteristic of its formation environment, as well as high values of Cr, which are thought to be the cause of its bluish green colouration.

Valsassina (Lombardy, Northern Italy) is located in the Lombard Southern Alps and is characterised by the presence of a metamorphic basement, by a major late Variscan intrusive complex and by Carboniferous–Permian volcano-sedimentary cover units. These rocks host a pervasive system of inadequately studied mineralised veins. These veins are characterised by base metal (Pb, Zn, Cu and Fe) and complex polymetallic assemblages.

In this study, we have investigated the ore textures, mineral compositions of sulfides and sulfosalts (by EMPA–WDS and LA–ICP–MS analyses), and stable isotopes (C and O) in carbonate gangue minerals of various mineralised veins to determine the conditions of deposition of these ore deposits. Two different vein families can be recognised in Valsassina: NNW–SSE veins characterised by a complex polymetallic sulfide–sulfosalt assemblage, also with Ni–Co–Fe arsenides and other Ag–Bi-bearing minerals; and NE–SW veins with a simpler, base metal sulfide assemblage. The Ni–Co-bearing NNW–SSE veins have some distinctive features of the ‘five-element vein’ type deposits, with the Ni–Co–Fe arsenide ore stage pre-dating a sulfide-tetrahedrite-dominated ore stage. LA–ICP–MS data for pyrite and sphalerite, and stable isotopic compositions (C and O) of the carbonate gangue minerals, show no clear differences between the two families of veins, which are probably linked genetically. The isotopic compositions of the Valsassina vein carbonates are closely comparable with the signature of several major five-element ore districts. Preliminary temperature estimates for the Valsassina vein systems were based on the sphalerite composition, applying the GGIMFis geothermometer. The estimated temperatures for the sulfide-dominated ore stage post-dating the Ni–Co minerals precipitation range between 100 and 250°C. The crosscutting relationships, observed for all the veins with the host rocks, suggest a possible late to post Variscan (late Permian) age, making these vein systems comparable with other late–post Variscan polyphase hydrothermal events affecting large sectors of the Southern Alpine domain.

Plumboperloffite, PbMn2+2Fe3+2(PO4)3(OH)3, is a new mineral and member of the bjarebyite group from Wiperaminga Hill West Quarry, Boolcoomatta Reserve, Olary Province, South Australia, Australia. The mineral was found in a single cavity in triplite–barbosalite matrix associated with fluorapatite, phosphosiderite, natrodufrénite and fluorite. The mineral forms intergrowths of subparallel, thin tabular to bladed crystals. Individual crystals are up to 40 μm in length. Plumboperloffite is brownish orange in colour with a vitreous lustre. The mineral has brittle tenacity, an excellent cleavage on {100} and uneven fracture. The calculated density is 4.416 g/cm3. Plumboperloffite is biaxial (+), α = 1.87(1), β = 1.88(1) and γ = 1.89(1) as measured in white light. The measured 2V is 88(1)°. Dispersion is apparently strong, based on extinction colours and the orientation is Y = b. The pleochroism in shades of yellow brown is X < Z < Y. Electron microprobe analysis gave the empirical formula (based on 15 O apfu) (Pb0.92Ca0.04Ba0.01K0.01)Σ0.98(Mn2+1.84Fe2+0.13)Σ1.97(Fe3+1.97Al0.03)Σ2.00(P3.01O11.94)(OH)Σ3.06. Plumboperloffite is monoclinic, space group P21/m with a = 9.1765(18), b = 12.340(3), c = 5.0092(10) Å, β = 101.01(3)°, V = 556.8(2) Å3 and Z = 2. The crystal structure has been refined using X-ray single-crystal data to a final R1 = 0.0207 on the basis of 1417 reflections with Fo > 4σ(Fo). The mineral is isostructural with members of the bjarebyite-group minerals.

Heflikite, the first Sc-dominant epidote-supergroup mineral, was discovered in two occurrences. The holotype was found in a granitic pegmatite associated with rodingite-like calc-silicate rocks and metasomatised granitic bodies exposed in a serpentinite quarry at Jordanów Śląski near Sobótka, Lower Silesia, SW Poland. The cotype comes from the Heftetjern pegmatite, Tørdal region, Norway. The holotype is composed of (in wt.%): 35.69 SiO2, 0.22 TiO2, 21.98 Al2O3, 6.12 Sc2O3, 0.07 V2O3, 1.10 Fe2O3, 0.11 Y2O3, 1.55 La2O3, 4.05 Ce2O3, 0.31 Pr2O3, 1.53 Nd2O3, 0.40 Sm2O3, 0.11 EuO, 0.56 Gd2O3, 0.14 MnO, 3.56 FeO, 0.16 MgO, 19.16 CaO and 1.78 H2O(+)calc.; total 98.60. The cotype contains: 34.92 SiO2, 0.44 TiO2, 0.82 SnO2, 19.13 Al2O3, 4.79 Sc2O3, 1.96 Fe2O3, 2.55 La2O3, 7.39 Ce2O3, 0.48 Pr2O3, 0.67 Nd2O3, 0.12 EuO, 0.61 Gd2O3, 0.13 MnO, 5.97 FeO, 17.66 CaO and 1.73 H2O(+)calc.; total 99.37. The compositions correspond to the following empirical formulae: (Ca1.729Ce0.125La0.048Nd0.046Gd0.016Sm0.012Pr0.010Y0.005Eu2+0.003)Σ1.994[(Al2.182Sc0.449Fe3+0.070V3+0.005)Σ2.706(Fe2+0.251Mg0.020Mn0.010)Σ0.281Ti0.014]Σ3.001(Si3.006O11)O(OH) and (Ca1.644Ce0.235La0.082Nd0.021Gd0.018Pr0.015Eu2+0.004)Σ1.019[(Al1.958Sc0.362Fe3+0.128)Σ2.448(Fe2+0.434Mn0.009)Σ0.443(Ti0.029Sn0.029)Σ0.058]Σ2.949(Si3.033O11)O(OH), respectively, and to the ideal formula Ca2(Al2Sc)(Si2O7)(SiO4)O(OH). The crystal structure of the holotype was refined in the monoclinic system with an R1 index of 8.62%. The crystal-structure refinement indicates exclusively Si occupied T sites, Al occupied M1 and M2 sites, and a Ca occupied A1 site. The M3 site is filled predominantly by trivalent cations, mainly Sc3+, with divalent cations (mainly Fe2+) as minor occupants. The A2 site is filled mostly by Ca with minor amounts of rare earth elements (REE). The holotype heflikite crystallised from metasomatic fluids that infiltrated a contact between the granitic pegmatite and the surrounding rodingite-type calc-silicate rocks and serpentinites. The fluids that introduced Sc into the pegmatite could have been either hydrothermal or related to low-grade regional metamorphism that postdated the formation of the pegmatite. The cotype heflikite formed during the late-stage hydrothermal crystallisation of the Sc-enriched granitic pegmatite.

Arsenoústalečite is a new mineral discovered in a sample collected from the abandoned Ústaleč deposit near Horažďovice, SW Bohemia, Czech Republic. It occurs as rare anhedral grains, up to 40 μm in size, in a calcite gangue, associated with stibioústalečite, hakite-(Hg), berzelianite and uraninite. Arsenoústalečite is dark grey, with a metallic lustre. Mohs hardness is ca. 3½–4; calculated density is 5.730 g/cm3. In reflected light, arsenoústalečite is pale grey with a yellowish shade; it is isotropic. Internal reflections were not observed. Reflectance values for the four COM wavelengths in air [R (%) λ (nm)] are: 33.3 (470); 33.1 (546); 33.0 (589); and 32.9 (650). The empirical formula of arsenoústalečite is (Cu5.81Ag0.17)Σ5.98(Cu5.95Fe0.02Zn0.02Hg0.01)Σ6.00(As1.40Sb0.87Te1.73)Σ4.00(Se10.30S2.32)Σ12.61. The ideal formula is Cu12(As2Te2)Se13, which requires (in wt.%) Cu 34.76, As 6.83, Te 11.63, Se 46.78, total 100.00. Arsenoústalečite is cubic, I$\bar{4}$3m, with unit-cell parameters a = 10.6580(19) Å, V = 1210.7(6) Å3 and Z = 2. The strongest reflections of the calculated powder X-ray diffraction pattern [d, Å (I, %) hkl] are: 3.077 (100) 222, 2.848 (10) 321, 1.946 (12) 521, 1.884(52) 440 and 1.608(21) 622. According to the single-crystal X-ray diffraction data (R1 = 0.0285 on the basis of 334 unique reflections with Fo > 4σFo and 24 refined parameters), arsenoústalečite is isotypic with other tetrahedrite-group minerals. The crystal structure of co-existing stibioústalečite, with an empirical formula of (Cu5.69Ag0.07)Σ5.76(Cu5.80Zn0.13Fe0.06Hg0.01)Σ6.00(Sb1.82As0.42Te1.76)Σ4.00(Se9.52S3.10)Σ12.62 and unit-cell parameters a = 10.6975(16) Å, V = 1224.2(5) Å3 and Z = 2, was refined to R1 = 0.0191 on the basis of 267 unique reflections with Fo > 4σFo and 24 refined parameters. Structural relationships and crystal-chemistry of both members of the ústalečite series are discussed. Arsenoústalečite is named after its type locality, the Ústaleč deposit and its chemical composition. The mineral and its name have been approved by the Commission on New Minerals, Nomenclature and Classification of the International Mineralogical Association (IMA2022-116).

Bimbowrieite, NaMgFe3+5(PO4)4(OH)6⋅2H2O, is a new mineral found in a mineralogically zoned rare-element bearing pegmatite at the White Rock No.2 quarry, Bimbowrie Conservation Park, South Australia, Australia. Crystals are dark olive green to greenish brown and are bladed with dimensions of up to 150 μm. Crystals occur as aggregates up to 0.4 mm across associated with ushkovite, bermanite, leucophosphite and sellaite. Bimbowrieite is pleochroic, biaxial (+), with α = 1.785(5), β = 1.795(5), γ = 1.805(5) and 2V(meas.) = 89.4(5)°. The average of 28 chemical analyses gave the empirical formula: (Na0.81Ca0.19)Σ1.00(Mg0.75Mn2+0.19Fe2+0.05)Σ0.99(Fe3+4.99Al0.01)Σ5.00(PO4)3.97(OH)5.88⋅2.05 H2O based on 24 oxygen atoms. Bimbowrieite is monoclinic, space group C2/c with a = 25.944(5), b = 5.1426(10), c = 13.870(3 Å, β = 111.60(3)°, V = 1720.4(7) Å3 and Z = 4. The crystal structure was refined to R1 = 1.97% for 1060 observed reflections with F0 > 4σ(F0). Bimbowrieite is isostructural with dufrénite. The structure is based on a trimer of face-sharing octahedra in which an M2 octahedra shares two trans faces with two M4 octahedra. Trimers link in the c-direction by sharing corners with two M3 octahedra and with T1 and T2 tetrahedra. Linkage in the a-direction is via corner-sharing M1 octahedra and linkage in the b-direction is via corner-sharing T1 and T2 tetrahedra.

Cotype material of stibiogoldfieldite from the Mohawk mine, Goldfield, Nevada, USA, has been examined in order to collect single-crystal X-ray diffraction data of Te-rich stibiogoldfieldite and to characterise the associated Ag–Bi–(S,Se) phase. Tellurium-rich stibiogoldfieldite, with empirical formula (Cu11.30Ag0.03)Σ11.33(Sb0.80As0.57Bi0.06Te2.57)Σ4.00(S12.83Se0.20)Σ13.03, is cubic, space group I$\bar{4}$3m, with unit-cell parameters a = 10.2947(3) Å and V = 1091.04(10) Å3. Its crystal structure has been refined to R1 = 0.0161 for 397 unique reflections with Fo > 4σ(Fo) and 25 refined parameters. The structure refinement confirmed the occurrence of a vacancy at the M(2) site, in agreement with the substitution M(2)Cu+ + X(3)(Sb/As)3+ = M(2)□ + X(3)Te4+. The Ag–Bi–(S,Se) phase was identified as the 6P homologue of the pavonite series, namely dantopaite. Its empirical formula is Cu1.36Ag4.39Pb0.12Bi12.62Sb0.06(S14.01Se7.91Te0.08), showing an exceptionally high Se content. Unit-cell parameters of Se-bearing dantopaite are a = 13.518(2), b = 4.0898(6), c = 18.984(3) Å, β = 106.816(6)°, V = 1004.7(3) Å3 and space group C2/m. The crystal structure was refined to R1 = 0.0504 for 1230 unique reflections with Fo > 4σ(Fo) and 82 refined parameters. The metal excess (~0.55 atoms per formula unit) of this pavonite homologue is mainly due to the accumulation of Ag and Cu in the thin slab of the crystal structure, whereas the high Se content is related to the partial replacement of S occurring preferentially in the thick PbS-like slab. Domains richer in Se and Pb in dantopaite, with empirical formula Cu0.89Ag4.50Pb0.49Bi12.53Sb0.07(S11.26Se10.74), were also identified, as grains up to 30 μm in size intimately intergrown with bohdanowiczite, indicating the possibility of a wide Se-to-S substitution in dantopaite.

Kalyuzhnyite-(Ce), ideally NaKCaSrCeTi(Si8O21)OF(H2O)3, is a new mineral from the Darai-Pioz alkaline massif, Tien-Shan mountains, Tajikistan. It occurs as equant grains up to 0.05 × 0.07 mm in a quartz–pectolite aggregate in a silexite-like peralkaline pegmatite. Associated minerals are quartz, fluorite, pectolite, baratovite, aegirine, leucosphenite, neptunite, reedmergnerite, orlovite, sokolovaite, mendeleevite-(Ce), odigitriaite, pekovite, zeravshanite, kirchhoffite and garmite. The mineral is colourless with a vitreous lustre and a white streak, and Dcalc. is 3.120 g/cm3. Kalyuzhnyite-(Ce) is monoclinic, P2/c, a = 18.647(4), b = 11.214(2), c = 14.642(3) Å, β = 129.55(3)° and V = 2360.9(11) Å3. The chemical composition of kalyuzhnyite-(Ce) is Nb2O5 0.53, TiO2 0.16, SiO2 43.85, Er2O3 0.13, Ho2O3 0.10, Gd2O3 0.09, Sm2O3 0.47, Nd2O3 6.22, Pr2O3 1.21, Ce2O3 6.34, La2O3 0.82, PbO 4.90, BaO 0.85, SrO 11.39, CaO 1.86, Cs2O 3.80, K2O 1.59, Na2O 2.99, H2O 5.24, F 1.55, O = F –0.65, total 100.31 wt.%. The empirical formula calculated on 26.11 (O + F) apfu is Na1.07K0.37Cs0.30Sr1.21Ca0.37Pb0.24Ba0.06(Ce0.43Nd0.41Pr0.08La0.06Sm0.03Gd0.01Er0.01Ho0.01)Σ1.04(Ti0.97Nb0.04)Σ1.01Si8.06O25.21F0.90H6.42, Z = 4. The simplified formula is (Na,□)(K,Сs)(Ca,Pb,Sr,Na)SrLn3+Ti(Si8O21)OF(H2O)3, where Ce is the dominant lanthanoid. The crystal structure was solved by direct methods and refined to an R1 index of 2.74%. In kalyuzhnyite-(Ce), the main structural units are a heteropolyhedral Na–Sr–Ce–Ti sheet, ideally [NaSrCeTiOF]7+, and a double (Si8O21)10– sheet parallel to (010). In the Si–O sheet, the Si tetrahedra form ten-membered rings. This is the first occurrence of such a double Si–O sheet in a mineral. The two sheets connect via common vertices of Na-, Sr-, Ce- and Ti-polyhedra and SiO4 tetrahedra to form a framework. The interstitial cations and H2O groups, ideally [(CaK)(H2O)3]3+, occur within the Si–O sheet. The mineral is named in honour of Vasily Avksentievich Kalyuzhny (1899–1993) in recognition of his contributions to the geology of ore deposits of Komi Republic (USSR) and the mineralogy of granitic pegmatites (Tajikistan).

Letnikovite-(Ce), ideally (Na□)Ca2Ce2[Si7O17(OH)]F4(H2O)4, is a new mineral with no natural or synthetic analogues (IMA2022–132). The mineral occurs at the Darai-Pioz alkaline massif, Tien-Shan mountains, Tajikistan, in a silexite-like peralkaline pegmatite. Letnikovite-(Ce) occurs as isolated prismatic grains up to 0.03 × 0.1 mm in a quartz–pectolite aggregate. Associated minerals are quartz, fluorite, pectolite, baratovite, aegirine, leucosphenite, neptunite, reedmergnerite, orlovite, sokolovaite, mendeleevite-(Ce), odigitriaite, pekovite, zeravshanite, kirchhoffite and garmite. The mineral is colourless with a vitreous lustre and a white streak, and Dcalc. is 2.847 g/cm3. Letnikovite-(Ce) is monoclinic, C2/m, a = 7.4726(3), b = 22.9196(9), c = 13.9360(6) Å, β = 105.550(5)° and V = 2299.43(17) Å3. The chemical composition of letnikovite-(Ce) is SiO2 42.38, Gd2O3 0.16, Eu2O3 0.28, Sm2O3 0.07, Nd2O3 5.64, Pr2O3 1.69, Ce2O3 11.73, La2O3 2.24, PbO 1.22, SrO 5.77, FeO 0.32, CaO 11.87, MgO 1.14, Cs2O 0.57, K2O 0.65, Na2O 2.24, H2O 7.79, F 7.29, O = F –3.07, total 99.98 wt.%. The empirical formula calculated on 7 Si apfu is Na0.72K0.14Cs0.04Ca2.10Sr0.55Mg0.28Pb0.05Fe0.04(Ce0.71Nd0.33La0.14Pr0.10Eu0.02Gd0.01)Σ1.31Si7O21.84F3.81H8.58 for Z = 4. The structural formula is (Na0.72Ca0.16□1.12)Σ2(Cs0.04□0.96)Σ1(Ca1.83□0.17)Σ2(Mg0.28Fe0.04□0.68)Σ1(Ln3+1.31Sr0.55Ca0.09Pb0.05)Σ2[Si7O17(OH)]F3.81(H2O)3.79, where Ln3+1.31 = (Ce0.71Nd0.33La0.14Pr0.10Eu0.02Gd0.01)Σ1.31. The simplified formula is (Na,□)2Ca2(Ln3+,Sr)2[Si7O17(OH)]F4(H2O)4, where Ce is the dominant lanthanoid. The crystal structure was solved by direct methods and refined to an R1 index of 4.2%. In letnikovite-(Ce), the main structural unit is a layer which consists of the central heteropolyhedral Ca–Ce sheet and two adjacent single [Si7O17(OH)] sheets parallel to (001). In the Si–O–OH sheet, the Si tetrahedra form five-membered and ten-membered rings. This is the first occurrence of a single [Si7O17(OH)]7– sheet in a mineral. The layers connect via Na and Cs at the interstitial A(1,2) sites, H2O groups and hydrogen bonding. The mineral is named in honour of Felix Artem'evich Letnikov (born October 3rd,1934) in recognition of his outstanding contributions to the field of petrology and geochemistry of Precambrian rocks.

Orthoamphibole, clinoamphibole and magnetite are common minerals in altered rocks associated spatially with Palaeoproterozoic volcanogenic massive sulfide (VMS) deposits in Colorado, USA and metamorphosed to the amphibolite facies. These altered rocks are dominated by the assemblage orthoamphibole (anthophyllite/gedrite)–cordierite–magnetite±gahnite±sulfides. Magnetite also occurs in granitoids, banded iron formations, quartz garnetite, and in metallic mineralisation consisting of semi-massive pyrite, pyrrhotite, chalcopyrite, and sphalerite with subordinate galena, gahnite and magnetite; amphibole also occurs in amphibolite. The precursor to the anthophyllite/gedrite–cordierite assemblages was probably the assemblage quartz–chlorite formed from hydrothermal ore-bearing fluids (~250° to 400°C) associated with the formation of metallic minerals in the massive sulfide deposits.

Element–element variation diagrams for amphibole, magnetite and ilmenite based on LA-ICP-MS data and Principal Component Analysis (PCA) for orthoamphiboles and magnetite show a broad range of compositions which are primarily dependent upon the nature of the host rock associated spatially with the deposits. Although discrimination plots of Al/(Zn+Ca) vs Cu/(Si+Ca) and Sn/Ga vs Al/Co for magnetite do not indicate a VMS origin, the concentration of Al+Mn together with Ti+V and Sn vs Ti support a hydrothermal rather than a magmatic origin for magnetite. Principal Component Analyses also show that magnetite and orthoamphibole in metamorphosed altered rocks and sulfide zones have distinctive eigenvalues that allow them to be used as prospective pathfinders for VMS deposits in Colorado. This, in conjunction with the contents of Zn and Al in magnetite, Zn and Pb in amphibole, ilmenite and magnetite, the Cu content of orthoamphibole and ilmenite, and possibly the Ga and Sn concentrations of magnetite constitute effective exploration vectors.

The lattice parameters and the crystal and magnetic structures of Fe2SiO4 have been determined from 10 K to 1453 K by high-resolution time-of-flight neutron powder diffraction. Fe2SiO4 undergoes two antiferromagnetic phase transformations on cooling from room temperature: the first, at 65.4 K, is to a collinear antiferromagnet with moments on two symmetry-independent Fe ions; the second transition, at ~23 K, is to a structure in which the moments on one of the sets of Fe ions (those on the ‘M1 site’) become canted. The magnetic unit cell is identical to the crystallographic (chemical) unit cell and the space group remains Pbnm throughout. The magnetic structures have been refined and the results found to be in good agreement with previous studies; however, we have determined the spontaneous magnetostrictive strains, which have not been reported previously. In the paramagnetic phase of Fe2SiO4, at temperatures of 70 K and above, we find that the temperature dependence of the linear thermal expansion coefficient of the b axis takes an unusual form. In contrast to the behaviour of the expansion coefficients of the unit-cell volume and of the a and c axes, which show the expected reduction in magnitude below ~300 K, that of the b axis remains almost constant between ~70 K and 1000 K.

Wortupaite (IMA2022–107) is a new hydrated magnesium nickel tellurite mineral with a zemannite-like structure, described from the Wortupa gold mine, South Australia, Australia. Wortupaite forms needles up to 25 μm in length, generally clustered and sometimes in blocky masses of shorter (10‒15 μm) crystals. Wortupaite is found growing on melonite, from which the component nickel and tellurium are derived, and is associated with calcite. The strongest powder diffraction lines are [dobsÅ(Iobs)(hkl)]: 8.059 (93) (100), 4.034 (92) (200), 2.832 (43) (211 and 121), 2.769 (100) (202) and 1.920 (45) (213 and 123). The empirical formula of wortupaite as determined by electron probe microanalysis is (Mg0.57Ni0.39Mn0.04)Σ1(Ni2+1.87Fe3+0.13)Σ2(Te4+O3)3⋅3H2O, simplified to the ideal formula of MgNi2+2(Te4+O3)3⋅3H2O with H2O content calculated from the crystal structure. The average crystal structure of wortupaite was determined by single-crystal X-ray diffraction with synchrotron radiation (R1 = 0.0558 for 100 independent reflections). Wortupaite is hexagonal, crystallising in the space group P63/m, with a = 9.2215(13) Å, c = 7.5150(15) Å, V = 553.43(19) Å3 and Z = 2. Wortupaite has a microporous structure, with the negatively charged zemannite-like framework formed by Te4+O3 trigonal pyramids and Ni2+O6 octahedra. For charge balance, Mg2+ and Ni2+ dominant sites are assumed to be located on central sites in the channels, coordinated by 6 H2O groups. An OW site was refined around the Mg2+ dominant site, but OW position(s) were not locatable around the Ni2+ dominant site. A discussion of the different models for crystallographic arrangement of channel species is provided, taking into account possible Fourier truncation effects. Unlike the other four minerals with zemannite-like structures which have a near 50% split of divalent and trivalent framework cations, wortupaite is the first natural phase to have only divalent cations in the framework sites.

Oxy-dravite, ideally Na(Al2Mg)(Al5Mg)(Si6O18)(BO3)3(OH)3(O), was found in a composition near its ideal end-member at the Beluga occurrence, Nunavut territory, Canada. It occurs in retrograde albite–muscovite–corundum–calcite domains in a calc-silicate rock. This uncommon oxy-dravite occurs as dark brown, equant to short-prismatic, idiomorphic crystals with vitreous lustre and up to ca. 4 × 3 cm in size. The oxy-dravite is optically uniaxial (–), with ω = 1.6453(5) and ɛ = 1.6074(18); its calculated density is 3.069 g.cm–3 with a compatibility index of 0.016. The Beluga oxy-dravite has trigonal symmetry, space group R3m with a = 15.9121(2) Å, c = 7.1788(10) Å, V = 1574.12(5) Å3 and Z = 3. The crystal structure was refined to R1 = 1.45 using 1613 unique reflections. The empirical crystal-chemical formula is X(Na0.88Ca0.08□0.03K0.01)Y(Al1.49Mg1.31Fe0.15Ti0.04Zn0.01)Z(Al5.42Mg0.58)T(Si5.84Al0.16O18)B(BO3)3V(OH2.95O0.05)W(O0.84OH0.01F0.15).

Oxy-dravite in nature commonly occurs in a solid solution with foitite, schorl and oxy-schorl. At the Beluga occurrence, its minor contents of Al, vacancy [□], and Ca are most likely compensated by (□Al)(NaR2+)–1 and (CaMg)(NaAl)–1 exchanges of the oxy-magnesio-foitite and magnesio-lucchesiite components. The Beluga occurrence of oxy-dravite is characterised by an Mg-rich environment related to a metamorphic overprint of the original sedimentary sequence. This sequence of marine dolomitic argillaceous marl was influenced by (B,Cl)-rich fluids, probably proximally-derived from mineral breakdown reactions in the calc-silicate during the retrograde stage of metamorphism. The locality is a rare example of a tourmaline + corundum assemblage.

A new member of the epidote supergroup, ferriandrosite-(Ce), ideally MnCeFe3+AlMn2+(Si2O7)(SiO4)O(OH), was found at the Július manganese ore occurrence near Betliar, Rožňava Co., Košice Region, Slovakia. It occurs as subhedral grains and polycrystalline aggregates, up to 0.3 mm in size, enclosed in pyroxmangite. Other associated minerals are spessartine, rhodochrosite, quartz, baryte and pyrosmalite-(Mn). Ferriandrosite-(Ce) is dark brown, with a light brown streak and vitreous lustre. The Mohs hardness is ~6½ to 7 and tenacity is brittle with no observable cleavage or fracture. The calculated density is 4.321 g⋅cm–3. Ferriandrosite-(Ce) is optically biaxial (+), with weak pleochroism, high surface relief and the mean calculated refractive index is 1.832. The empirical structural formula of ferriandrosite-(Ce), based on 13 anions per formula unit, is A1(Mn2+0.63Ca0.35Ce0.02)Σ1.00A2(Ce0.53La0.27Nd0.14Pr0.05REE*0.01)Σ1.00M1(Fe3+0.41Al0.12V3+0.01Mg0.40Ti0.05)Σ0.99M2Al1.00M3(Mn2+0.75Fe2+0.22Mg0.03)Σ1.00T1–3Si3.00O11O4(O0.67F0.33)(OH), where REE* are minor rare earth elements. Ferriandrosite-(Ce) is monoclinic, space group P21/m, a = 8.8483(4) Å, b = 5.7307(3) Å c = 10.0314(5) Å, β = 113.3659(15)°, V = 466.95(4) Å3 and Z = 2. The crystal structure of ferriandrosite-(Ce) was refined to a final R1 = 0.0210 for 1910 reflections with Fo > 4σ(Fo) and 127 refined parameters. Structural features of ferriandrosite-(Ce) are discussed and compared with other members of the androsite-series.

A new occurrence of austinite, CaZnAsO4(OH), conichalcite, CaCuAsO4(OH), and zincolivenite, CuZnAsO4(OH), is described from the Tripi mine, Peloritani Mountains, Sicily, Italy. These species have been observed in euhedral crystals in vugs of a calcite vein and were characterised using single-crystal X-ray diffraction, electron microprobe analysis and micro-Raman spectroscopy. Austinite and conichalcite have isotypic relations, both crystallising in space group P212121. Unit-cell parameters of austinite are a = 7.4931(5), b = 9.0256(6), c = 5.9155(4) Å, V = 400.06(5) Å3; its crystal structure was refined on the basis of 1210 unique reflections with Fo > 4σ(Fo) and 77 least-square parameters to R1 = 0.0236. Conichalcite has unit-cell parameters a = 7.419(10), b = 9.111(11), c = 5.867(7) Å and V = 396.6(1.4) Å3; the diffraction quality of its available grains was not good enough to allow a high-quality structural refinement. Chemical formulae of austinite and conichalcite are Ca1.04(1)Zn0.86(4)Cu0.09(4)As0.98(2)P0.02(1)O4(OH)0.98 and Ca0.98(1)Fe2+0.02(4)Cu0.69(10)Zn0.30(6)As0.97(2)P0.03(1)O4(OH)0.98, respectively. The new chemical data on the austinite–conichalcite isotypic pair, coupled with previous analyses, supports a possible miscibility gap between the compositions (Zn0.25Cu0.75) and (Zn0.50Cu0.50). Zincolivenite has unit-cell parameters a = 8.4594(9), b = 8.5324(8), c = 5.9893(6) Å, V = 432.30(12) Å3 and space group Pnnm; its crystal structure was refined to R1 = 0.0230 for 523 unique reflections with Fo > 4σ(Fo) and 47 least-square parameters. Its chemical composition is Cu0.73(5)Zn1.25(5)As1.01(1)O4(OH)1.01. The refinement of the crystal structure supports the ordering of Cu and Zn in two different crystallographic sites. Micro-Raman spectra of austinite, conichalcite and zincolivenite are discussed, with a focus on the O–H stretching region where local Zn and Cu arrangements affect the position of Raman bands in zincolivenite. These arsenates probably play an environmental role in the Peloritani area, where the occurrence of high contents of some potentially toxic elements in soils and stream sediments has been reported.

The diffusive exchange of dissolved material between fluid flowing in a fracture and the enclosing wallrocks (rock matrix diffusion) has been proposed as a mechanism by which radionuclides derived from a radioactive waste repository may be removed from groundwater and incorporated into the geosphere. To test the effectiveness of diffusive exchange in igneous and metamorphic rocks, we have carried out an investigation of veins formed at low temperatures (<100°C), comparing the oxygen isotopic composition of vein calcite with that of secondary calcite in the wallrocks. Two examples of veins from the Borrowdale Volcanic Group, Cumbria, and one from the Mountsorrel Granodiorite, Leicestershire, UK, have remarkably similar vein calcite compositions, ca. +20‰(SMOW) or greater, substantially heavier than the probable compositions of the host rocks, and these vein calcite compositions are inferred to reflect the infiltrating fluid and the temperature of vein formation. Calcites from the wallrocks are similar to those in veins, with little evidence for exchange with the wallrocks. The results support existing models for this type of vein which suggest low-temperature growth from formation brines originally linked to Permian or Triassic evaporites. The results are consistent with flow through fractures being attenuated through a damage zone adjacent to the fracture and provide no evidence of diffusional exchange with pore waters from wallrocks.

Fluorbritholite-(Nd), ideally Ca2Nd3(SiO4)3F, has been approved by the International Mineralogical Association (IMA2023–001) and constitutes a new member of the britholite group of the apatite supergroup. It occurs in skarn from the Malmkärra iron mine, Norberg, Västmanland (one of the Bastnäs-type deposits in Sweden), associated with calcite, dolomite, magnetite, lizardite, talc, fluorite, baryte, scheelite, gadolinite-(Nd) and other REE minerals. Fluorbritholite-(Nd) forms anhedral and small grains, rarely up to 250 μm across. They are brownish pink and transparent with a vitreous to greasy lustre. The mineral is brittle, with an uneven or subconchoidal fracture and lacks a cleavage. In thin section, the mineral is nonpleochroic, uniaxial (–). Dcalc = 4.92(1) g⋅cm−3 and ncalc = 1.795. The empirical chemical formula from electron microprobe (WDS) point analyses is (Ca1.62Nd0.97Ce0.83Y0.52Sm0.30Gd0.23Pr0.17La0.16Dy0.11Er0.03Tb0.03Ho0.01Yb0.01)Σ4.99(Si2.92P0.08As0.01)Σ3.01O12.00[O0.48F0.26(OH)0.14Cl0.10Br0.02]Σ1.00. The crystal structure of fluorbritholite-(Nd) was refined from single-crystal X-ray diffraction data to R1= 0.043 for 704 unique reflections. It belongs to the hexagonal system, space group P63/m, with unit cell parameters a = 9.5994(3), c = 6.9892(4) Å and V = 557.76(5) Å3 for Z = 2. Fluorbritholite-(Nd) and other britholite-group minerals are a major sink for neodymium in REE-bearing skarns of Bastnäs type.