Under what conditions do incumbents succeed in curtailing programs benefitting large constituencies of low-income voters? We undertake a within-country comparison of four highly popular cash transfer policies in Brazil in the 2010s. Our contribution is threefold. First, we refine the concept of policy drift by distinguishing executive-driven drift (resulting from incumbents’ decisions) from opposition-driven drift (resulting from the veto power of welfare opponents). The latter results from the dispersion of authority; the former is favored by its concentration. Second, we show that executive-driven drift is a successful strategy when programs give incumbents discretion over entitlement and benefits, meaning authority to make unilateral decisions. Third, we argue that executive-driven drift explains retrenchment outcomes better than partisan orientation, size of program’s clientele, and fiscal impacts. Incumbents were more successful in their retrenchment initiatives when concentration of authority in the executive branch allowed them to bypass legislative and judicial veto points.

Kaolinites with varying degrees of defect structures have been studied by both mid-infrared (IR) and near-IR diffuse reflectance spectroscopy (DRIFT). Difference bands were observed in the 2650- to 2750-cm−1 region. This region coincides with the kaolinite-deuterated hydroxyl stretching region. Summation bands were observed in the near-IR spectra in the 4500- to 4650-cm−1 and in the 7050- to 7250- cm−1 region. Each of the spectral regions of the summation and difference bands is both kaolin polytype and sample dependent. It is proposed that each of these sets of bands arises from the combination of the hydroxyl stretching frequencies and the hydroxyl deformation frequencies and, to a lesser extent, the silicon-oxygen symmetric stretching vibration of the siloxane layer. Additional difference bands of very low intensity were also observed at 2930 and 2856 cm−1. Combination bands were observed in all kaolinites at 2137 and 2227 cm−1. Each of the 3 major combination spectral regions was composed of 5 component bands corresponding to the 4 IR active and the 1 Raman active kaolinite hydroxyl stretching frequencies. Combination bands were also observed at ~1932 and 1821 cm−1.

Bentonites are excellent materials for sequestering various metal cations because of the cation fixation ability of the constituent montmorillonite layers, but sometimes, such as in the case of Cu2+, the exact location of cation fixation with respect to the clay layers is difficult to determine. Na-montmorillonite was prepared from the <2 µm fraction of the bentonite Calcigel (from Bavaria, Germany) and exchanged by Cu2+ and Na+ or by Cu2+ and ${\text{NH}}_4^{+}$\$\end{document} cations. The resulting materials (bi-ionic Cu-Na and Cu-NH4 samples, respectively, as well as homo-ionic forms with Cu2+, Na+ and ${\text{NH}}_4^{+}$\$\end{document}) were heated for 24 h at temperatures of 300 and 450°C and the structural evolution characterized using X-ray diffraction (XRD) analysis, Fourier Transform Infrared (FTIR) spectroscopy, and differential scanning calorimetry (DSC) analysis.

The XRD patterns showed that the Cu sample and the Cu-Na sample have basal spacings of 12.5 Å. Upon heating at 300 and 450°C, the layers collapsed to 9.5 Å. In contrast, the d001 value in the NH4 sample and Cu-NH4 sample decreased to 10.0 Å and 10.2 Å, respectively, during the heat treatment. The Cu2+ ions migrated irreversibly into the montmorillonite structure.

For the NH4 and the Cu-NH4 samples, DSC analyses show that NH3 evolved at between 300 and 400°C though the octahedral sheet was not altered substantially by the H+ generated. Infrared spectra show that the bands of the Si-O and OH vibrations of all samples were changed upon heating due to the movement of the dehydrated cations into the hexagonal holes of the tetrahedral sheet. Apparently no Cu2+ was trapped in the octahedral sheet. In the case of the Cu-NH4 form, both Cu2+ fixation and de-ammonization occurred during the heat treatment. Other than maintaining the basal spacing, no effect of the presence of ${\text{NH}}_4^{+}$\$\end{document} on the Cu2+ fixation could be found for the montmorillonite studied.

Two low-dose dicamba exposure trials were conducted on container-grown peach trees in Fayetteville, AR. Peach trees were ‘July Prince’ scions grafted onto ‘Guardian’ rootstock, were transplanted into 19-L containers, and received experimental dicamba treatments in each year. Container trials were initiated in 2020 and repeated on new trees in 2021. In the repeated application trial, dicamba was applied at 5.6 g ae ha−1 (1/100X field rate) in five sequences: an untreated control receiving no herbicide, one treatment receiving only an initial application, and three treatments receiving an initial application plus sequential applications at the same rate occurring at 14 d, 28 d, and 14 d + 28 d after initial treatment (DAT). A separate trial assessed peach tree responses to dicamba applied at 11.2 g ae ha−1 (1/50X field rate) using a selection of nozzles with differing droplet spectrum characteristics: Turbo TeeJet® induction nozzle TTI11002, air induction turbo TwinJet® nozzle AITTJ60-11002, air induction extended-range (XR) TeeJet® nozzle AIXR11002, XR TeeJet® flat-fan nozzle XR11002, and XR TeeJet® flat-fan nozzle XR1100067. Peach tree height, tree cross-sectional area, and leaf chlorophyll content were not reduced in response to any sequence of dicamba application or nozzle selection. Repeated applications of dicamba at a 1/100X rate did not increase peach injury after 28 DAT. By 84 DAT, no effect of nozzle type on peach tree injury was discernable, and all treatments caused below 4% injury. No dicamba or dicamba metabolites were observed in leaf samples collected at 14, 69, or 85 DAT from trees treated with XR1100067 or in untreated controls. While peach tree injury was observed throughout the experiment, dicamba residues were detected consistently only in 2020 from leaf samples of trees treated with dicamba at a 1/50X rate using TTI1102, AITTJ60-11002, AIXR11002, and XR11002 nozzles.

We present a Markov chain example where non-reversibility and an added edge jointly improve mixing time. When a random edge is added to a cycle of n vertices and a Markov chain with a drift is introduced, we get a mixing time of $O(n^{3/2})$ with probability bounded away from 0. If only one of the two modifications were performed, the mixing time would stay $\Omega(n^2)$ .

Auxinic herbicides have been commonly used in production systems for broadleaf weed control for many years. One potential negative aspect to their use is their propensity to volatilize and move away from the treated area after application. This research examined three herbicide formulations and their relative amounts of vaporization following application under field conditions in Knoxville, TN, in 2017, 2018, and 2019. Herbicide treatments evaluated included 2,4-D choline, 2,4-D amine, and the diglycolamine (DGA) salt of dicamba. Ten field studies were conducted with major parameters including air sampler height (0.3 and 1.3 m) and applied surface condition (dry wheat stubble or green-plant vegetation). The relative volatility indicated by the study was that dicamba > 2,4-D choline = 2,4-D amine. Detected herbicide concentrations were numerically higher at the 0.3-m sampling height and in the green-plant surface condition. These results confirm that dicamba is more volatile than 2,4-D and that there was no difference in vapor emissions between the amine and choline salts of 2,4-D under field conditions.

There is zero tolerance for dicamba and dicamba metabolite residue in tomato (Solanum lycopersicum L.) fruit following exposure to dicamba. Field trials were conducted in 2020 and 2021 to determine the persistence of dicamba and metabolite (5-hydroxy dicamba and 3,6-dichlorosalicylic acid [DCSA]) residue in processing tomato shoots and fruits. Dicamba was applied 49 d after transplanting at 0, 0.53, 5.3, and 53 g ae ha−1. Tomato plants were harvested 5, 10, 20, 40, and 61 d after treatment (DAT). No 5-hydroxy dicamba was recovered from any sample. In 2020, the DCSA metabolite was detected from tomato shoot tissue when dicamba was applied at the 53 g ha−1 rate at 0 (14 µg kg−1), 5 (3 µg kg−1), and 20 DAT (5 µg kg−1) and from tomato fruit tissue at 53 g ha−1 at 20 (2 µg kg−1) and 61 DAT (2 µg kg−1). In 2021, DCSA was not detected from tomato shoot or fruit tissues at any harvest date. By 5 DAT, dicamba was only detected from tomato shoot tissues treated with 53 g ha−1. At 0 DAT, dicamba residue was detectable only from tomato fruit on plants treated with 53 g ha−1. Tomato fruit dicamba residue from plants treated with 5.3 g ha−1 had a predicted peak of 19 µg kg−1 at 11.3 DAT. Tomato fruit dicamba residue from plants treated with 53 g ha−1 decreased from 164 to 8 µg kg−1 from 5 to 61 DAT. Furthermore, this study confirms that dicamba is detectable from tomato fruits at 61 DAT following exposure to 5.3 or 53 g ha−1 dicamba. Growers who suspect dicamba exposure should include tomato fruit tissue with their collected sample or sample tomato fruits separately.

Field studies were conducted to determine the effects of synthetic auxin herbicides at simulated exposure rates applied to ‘Covington’ sweetpotato propagation beds on the quality of nonrooted stem cuttings (slips). Treatments included diglycolamine salt of dicamba, 2,4-D choline plus nonionic surfactant (NIS), and 2,4-D choline plus glyphosate at 1/10, 1/33, or 1/66 of a 1X application rate (560 g ae ha−1 dicamba, 1,065 g ae ha−1 2,4-D choline, 1,130 g ae ha−1 glyphosate) applied at 2 or 4 wk after first slip harvest (WASH). Injury to sweetpotato 2 wk after treatment was greatest when herbicides were applied 2 WASH (21%) compared to 4 WASH (16%). More slip injury was caused by 2,4-D choline than by dicamba, and the addition of glyphosate did not increase injury over 2,4-D choline alone. Two weeks after the second application, sweetpotato slips were cut 2 cm above the soil surface and transplanted into production fields. In 2019, sweetpotato ground coverage 8 wk after transplanting was reduced 37% and 26% by the 1/10X rates of dicamba and 2,4-D choline plus NIS, respectively. Though dicamba caused less injury to propagation beds than 2,4-D choline with or without glyphosate, after transplanting, slips treated with 1/10X dicamba did not recover as quickly as those treated with 2,4-D choline. In 2020, sweetpotato ground coverage was 90% or greater for all treatments. Dicamba applied 2 WASH decreased marketable sweetpotato storage root yield by 59% compared to the nontreated check, whereas treatments including 2,4-D choline reduced marketable yield 22% to 29%. All herbicides applied at 4 WASH reduced marketable yield 31% to 36%. The addition of glyphosate to 2,4-D choline did not increase sweetpotato yield. Results indicate that caution should be taken when deciding whether to transplant sweetpotato slips that are suspected to have been exposed to dicamba or 2,4-D choline.

Dicamba is a synthetic auxin herbicide that may be applied over the top of transgenic dicamba-tolerant crops. The increasing prevalence of herbicide-resistant weeds has resulted in increased reliance on dicamba-based herbicides in soybean production systems. Because of the high volatility of dicamba it is prone to off-target movement, and therefore concern exists regarding its drift onto nearby specialty crops. The present study evaluates 12 mid-Atlantic vegetable crops species for sensitivity to sublethal rates of dicamba. Soybean, snap bean, lima bean, tomato, eggplant, bell pepper, cucumber, summer squash, watermelon, pumpkin, sweet basil, lettuce, and kale were grown in a greenhouse and exposed to dicamba at 0, 0.056, 0.11, 0.28, 0.56, 1.12, 2.24 g ae ha−1, which is, respectively, 0, 1/10,000, 1/5,000, 1/2,000, 1/1,000, 1/500, and 1/250 of the maximum recommended label rate for soybean application (560 g ae ha−1). Vegetable crop injury was evaluated 4 wk after treatment using visual rating methods and leaf deformation index measurements. Overall, snap bean was the most sensitive crop, with dicamba rates as low as 0.11 g ae ha−1 resulting in significantly higher leaf deformation levels compared with the nontreated control. Other Fabaceae and Solanaceae species also demonstrated high sensitivity to sublethal rates of dicamba with rates ranging 0.28 to 0.56 g ae ha−1 causing higher leaf deformation compared with the nontreated control. While cucumber, pumpkin, and summer squash were no or moderately sensitive to dicamba, watermelon showed greater sensitivity with unique symptoms at rates as low as 0.056 g ae ha−1 based on visual evaluation. Within the range of tested dicamba rates, sweet basil, lettuce, and kale demonstrated tolerance to dicamba with no injury observed at the maximum rate of 2.24 g ae ha−1.

Non-dicamba-resistant soybean yield loss resulting from dicamba off-target injury has become an increasing concern for soybean growers in recent years. After off-target dicamba movement occurs onto sensitive soybean, little information is available on tactics that could be used to mitigate the cosmetic or yield losses that may occur. Therefore, a field experiment was conducted in 2017, 2018, and 2019 to determine whether certain recovery treatments of fungicide, plant growth hormone, macro- and micronutrient fertilizer combinations, or weekly irrigation could reduce dicamba injury and/or result in similar yield to soybean that was not injured with dicamba. Simulated drift events of dicamba (5.6 g ae ha−1) were applied to non-dicamba-resistant soybean once they reached the V3 or R2 stages of growth. Recovery treatments were applied approximately 14 d after the simulated drift event. Weekly irrigation was the only recovery treatment that provided appreciable levels of injury reduction or increases in soybean height or yield compared to the dicamba-injured plants. Weekly irrigation following the R2 dicamba injury event resulted in an 1% to 14% increase in soybean yield compared with the dicamba-injured control. All other recovery treatments resulted in soybean yields that were similar to the dicamba-injured control, and similar to or lower than the nontreated control. Results from this study indicate that if soybean have become injured with dicamba, weekly irrigation will help soybean recover some of the yield loss and reduce injury symptoms that resulted from off-target dicamba movement, especially in a year with below average precipitation. However, yield loss will likely not be restored to that of noninjured soybean.

In Mississippi, rice reproduction and ripening often overlaps with soybean maturation, creating potential for herbicide exposure onto rice from desiccants applied to soybeans. Six independent studies were conducted concurrently at the Delta Research and Extension Center in Stoneville, MS, from 2016 to 2018 to determine the response of rice to sublethal concentrations of soybean desiccants during rice reproductive and ripening growth stages. Studies included the desiccants paraquat, glyphosate, saflufenacil, sodium chlorate, paraquat + saflufenacil, and paraquat + sodium chlorate applied at a rate equal to 1/10th of Mississippi recommendations. Treatments were applied at five different rice growth stages, beginning at 50% heading––defined as 0 d after heading (DAH)––with subsequent applications at 1-wk intervals (0, 7, 14, 21, and 28 DAH), up to harvest. Injury was observed 7 d after application (DAA), with five of six desiccants at all application timings. No injury was observed with glyphosate application across all rating intervals. Rough rice grain yield following all glyphosate applications was reduced by >6%. In the studies evaluating paraquat, injury ranged from 5% to 18% at all evaluations, regardless of application timing. Rough rice grain yield was reduced >12% 0 to 21 DAH, following paraquat application. Similar trends were observed with paraquat + saflufenacil and paraquat + sodium chlorate, with rice exhibiting yield decreases >6% following an application 0 to 14 and 0 to 21 DAH, respectively. In studies evaluating saflufenacil and sodium chlorate, rough rice grain yield was >95% of the untreated across all application timings Yield component trends closely resembled reductions observed in rough rice grain yield. Reductions in head rice yield were >5% following applications of paraquat or paraquat + saflufenacil 0 to 14 and 0 to 21 DAH, respectively. Late-season exposure to sublethal concentrations of desiccant from 50% heading (0 DAH) to 28 DAH has an impact on rough rice grain yield, yield components, and head rice yield.

Dicamba is a synthetic auxin herbicide that is prone to off-target movement, including drift and volatilization. Due to the increased acreage of dicamba-resistant soybean to control glyphosate-resistant weeds, dicamba drift injury to neighboring vegetable crops is of concern. A method to quantify leaf deformation (often referred to as leaf cupping) caused by dicamba injury was developed and compared to visual rating techniques to determine its accuracy and suitability. A second objective was to determine the relative dicamba sensitivity of several economically important vegetable crops. Soybean, snap bean, tomato, and cucumber were grown in a greenhouse and exposed to dicamba at 0, 56, 112, 280, 560, 1,120, and 2,240 mg ae ha−1, which is, respectively, 0, 1/10,000, 1/5,000, 1/2,000, 1/1,000, 1/500, and 1/250 of the maximum recommended label rate for soybean application (560 g ae ha−1). Plants were evaluated visually and using an imaging analysis technique that measures the leaf deformation index (LDI) with a leaf area scanner. LDI is calculated by dividing the two-dimensional projection of the area of the leaf in its natural configuration by the area of the flattened leaf. Across all four crops, log-logistic regression analysis indicated the LDI method had lower I50 values with lower standard error, demonstrating that the LDI method gives more precise estimates of sensitivity. This novel method provides an objective, quantitative method for measuring dicamba drift injury and determining relative sensitivities of valuable specialty crops.

A fundamental problem in research into language and cultural change is the difficulty of distinguishing processes of stochastic drift (also known as neutral evolution) from processes that are subject to selection pressures. In this article, we describe a new technique based on deep neural networks, in which we reformulate the detection of evolutionary forces in cultural change as a binary classification task. Using residual networks for time series trained on artificially generated samples of cultural change, we demonstrate that this technique is able to efficiently, accurately and consistently learn which aspects of the time series are distinctive for drift and selection, respectively. We compare the model with a recently proposed statistical test, the Frequency Increment Test, and show that the neural time series classification system provides a possible solution to some of the key problems associated with this test.

Differential tolerance may be observed among rice cultivars with desiccant exposure events during rice reproduction and ripening. Five field studies were established at the Mississippi State University Delta Research and Extension Center in Stoneville, MS, to determine the effects of exposure to sublethal concentrations of common desiccants across multiple rice cultivars. Rice cultivars in the study were ‘CLXL745’, ‘XL753’, ‘CL163’, ‘Rex’, and ‘Jupiter’. Desiccant treatments included no desiccant, paraquat, or glyphosate and were applied at the 50% heading growth stage respective to cultivar. Differential injury estimates among cultivars and desiccant treatments was observed when glyphosate or paraquat was applied at 50% heading. Injury from glyphosate at 50% heading was nondetectable across all cultivars. However, injury following paraquat applications was >7% across all rating intervals and cultivars. Hybrid cultivars exhibited less injury with paraquat applications than the inbred cultivars in the study. Rice following exposure to glyphosate or paraquat at 50% heading growth stage produced rough rice grain yield decreases ranging from 0% to 20% and 9% to 21%, respectively. Rough rice grain yield decreases were observed across all cultivars following paraquat exposure, and all inbred cultivars following glyphosate exposure. Across desiccant treatment, head rice yield was reduced in three of five cultivars in the study. When pooled across cultivar, paraquat applications cause a head rice yield reduction of 10%, whereas rice yield following glyphosate application remained >95%. Although differential tolerance among cultivars to paraquat or glyphosate exposure was observed, impacts on grain quality coupled with yield reductions suggests extreme rice sensitivity to exposure to sublethal concentrations of these desiccants at the 50% heading growth stage.

A thorough understanding of commonly used herbicide application practices and technologies is needed to provide recommendations and determine necessary application education efforts. An online survey to assess ground and aerial herbicide application practices in Arkansas was made available online in spring 2019. The survey was direct-emailed to 272 agricultural aviators and 831 certified commercial pesticide applicators, as well as made publicly available online through multiple media sources. A total of 124 responses were received, of which 75 responses were specific to herbicide applications in Arkansas agronomic crops, accounting for approximately 49% of Arkansas’ planted agronomic crop hectares in 2019. Ground and aerial application equipment were used for 49% and 51% of the herbicide applications on reported hectares, respectively. Rate controllers were commonly used application technologies for both ground and aerial application equipment. In contrast, global positioning system-driven automatic nozzle and boom shut-offs were much more common on ground spray equipment than aerial equipment. Applicator knowledge of nozzles and usage was limited, regardless of ground or aerial applicators, as only 28% of respondents provided a specific nozzle type used, indicating a need for educational efforts on nozzles and their importance in herbicide applications. Of the reported nozzle types, venturi nozzles and straight-stream nozzles were the most commonly used for ground and aerial spray equipment, respectively. Spray carrier volumes of 96.3 and 118.8 L ha−1 for ground spray equipment and 49.6 and 59.9 L ha−1 for aerial application equipment were the means of reported spray volumes for systemic and contact herbicides, respectively. Respondents indicated application optimization was a major benefit of utilizing newer application technologies, herbicide drift was a primary challenge, and research needs expressed by respondents included adjuvants, spray volume efficacy, and herbicide drift. Findings from this survey provided insight into current practices, technologies, and needs of Arkansas herbicide applicators. Research and education efforts can be implemented as a result to address aforementioned needs while providing applied research-based information to applicators based on current practices.