The effects of chromium or nickel oxide additions on the composition of Portland clinker were investigated by X-ray powder diffraction associated with pattern analysis by the Rietveld method. The co-processing of industrial waste in Portland cement plants is an alternative solution to the problem of final disposal of hazardous waste. Industrial waste containing chromium or nickel is hazardous and is difficult to dispose of. It was observed that in concentrations up to 1% in mass, the chromium or nickel oxide additions do not cause significant alterations in Portland clinker composition.

The Semi-manual Structure-sensitive SEARCH-MATCH procedure [Frevel, (1982), Anal. Chem. 54, 691–697] has been automated for the Hewlett-Packard HP 3354 Computer. The software is coded in the interpretive HP LAB BASIC II language. A core file of 1026 selected powder diffraction standards has been compiled covering the common crystalline phases encountered in industry, the ubiquitous crystalline minerals, and prototypes of the more frequently found crystal structures. Solid solutions can be readily identified.

Limitations in powder diffractometry imposed by scatter slits and/or a diffracted-beam monochromator, which have been ignored in the past, are discussed and mapped quantitatively. These limitations become manifest especially with ωoffsets, i.e.in stress measurements and with ωoscillation to improve the reproducibility of intensities in the presence of too coarse grains. The limitations can only be established with knowledge of slit sizes and with precise alignment of all slits, their holders and the diffracted-beam monochromator. To that end, concise, accurate procedures for obtaining these measurements in-situare proposed.

New quenched-in face-centred cubic fluorite-type materials were synthesised in the Bi2O3–Yb2O3–PbO system. After annealing in air at 500 °C for up to 200 h, each material underwent a conductivity-lowering structural transformation, thus making them unsuitable for use as solid electrolytes in solid-oxide fuel cells. For example, (BiO1.5)0.80(YbO1.5)0.17(PbO)0.03 underwent a fluorite- to Bi17Yb7O36-type orthorhombic transformation, indicative of long-range cation ordering, and (BiO1.5)0.80(YbO1.5)0.11(PbO)0.09 underwent a fluorite- to β-Bi2O3-type tetragonal transformation, indicative of long-range 〈001〉 oxide-ion vacancy ordering.

X-ray powder diffraction data, unit-cell parameters, and space group for a novel platinum-based anticancer complex cis-[dibromo(1R,2R)-1, 2-diaminocyclohexane-κN, κN′]platinum(II), cis-Pt(C6H14N2)Br2, are presented [a = 11.862(4) Å, b = 7.222(3) Å, c = 13.353(2) Å, β = 97.813(7)°, cell volume V = 1133,36 Å3, Z = 4, space group P21]. All measured lines were indexed and are consistent with the P21 space group. No detectable impurities were observed.

X-ray powder diffraction data for the anticancer drug PtCl2(C2H3O2)2(C6H13N)(NH3) are reported. The crystal structure of PtCl2(C2H3O2)2(C6H13N)(NH3) obtained from a Rietveld refinement are: space group P21/a, a=13.547(2) Å, b=8.260(1) Å, c=14.638(3) Å, β=110.429(2)°, V=1534.96 Å3, Z=4 and Dcalc.=2.068 Mg/m3.

Ca3−xSrxCo4O9 with different compositions (x=0, 0.15, 0.3, and 0.45) were synthesized from stoichiometric mixtures of Co3O4, CaCO3, and SrCO3, and their unit-cell parameters were determined. The powders were mixed with silicon standard powder, and XRD patterns were collected and analyzed using TOPAS. The compounds were determined to be monoclinic with space group of P2. Unit-cell parameters changed from a=4.8329(3) Å, b=4.5727(1) Å, c=10.8360(4) Å, and β=98.093(7)° when x=0, to a=4.8432(1) Å, b=4.6100(3) Å, c=10.8668(3) Å, and β=98.110(5)° when x=0.3. An unidentified second phase was observed when x=0.45.

Four new compounds with general formula CdI2-2(NH2-PhX) (Ph represents phenyl radical; X represents Cl or H atoms) were obtained and characterized. Two of them, bisaniline diiodidecadmium(II) — CdI2⋅2[NH2–C6H5] {1} and bis(2-chloroaniline) diiodidecadmium(II) — CdI2⋅2[NH2–C6H4Cl] {2}, crystallize in monoclinic system, whereas another two, bis(3-chloroaniline) diiodidecadmium(II) — CdI2⋅2[NH2–C6H4Cl]{3} and bis(4-chloroaniline) diiodidecadmium(II) hemi(4-chloroanilate) — CdI2⋅2[NH2–C6H4Cl]½[NH2–C6H4Cl] {4}, crystallize in triclinic system. The investigated compounds, from chemical point of view, are similar to the so-called cisplatin—a compound used as a chemotherapy drug to treat many types of cancers. Their syntheses and results of X-ray powder diffraction studies at room and elevated temperatures are described in this paper.

X-ray powder diffraction data and refined unit cell parameters for the (Bi, Pb)2Sr2Ca2Cu3Ox (2223) superconducting phase, indexed using incommensurate modulation principles, are reported. Comparison of the results obtained with one- and two-component modulation wave vectors showed that the two-component modulation wave vector is superior for indexing the satellite reflections. A two-component wave vector indexing result seems likely when only the powder diffraction data are considered.

X-ray powder diffraction was used for the structural study of nonlinear optical borates K1−xNaxSr4(BO3)3 (x≤0.5). Results show that up to 50% K+ can be substituted by Na+ in orthorhombic K1−xNaxSr4(BO3)3. Isolated BO3 triangles in the Na-substituted compound constrict to adjust to a local distribution of alkali-metal atoms, which explains the large range of structural homogeneity. An expansion of the c axis in a unit cell with increasing Na substitution was found probably caused by the tilted BO3 triangles and asymmetric distortion of (K/Na)O8 polyhedra. As the ratio of ionic radii of alkaline-earth and alkali-metal cations decreases and the electronegative difference between alkaline-earth and alkali-metal cations increases, the crystal system of MM′4(BO3)3 borates changes from cubic to orthorhombic and then to monoclinic.

X-ray powder diffraction data, unit-cell parameters, and space group for calcium(II)–naproxen complex, C28H26CaO6·2H2O, are reported [a = 36.918(2) Å, b = 5.655(6) Å, c = 12.505(6) Å, β = 91.263(2)°, cell volume V = 2610.47 Å3, Z = 4, and space group C2]. All measured lines were indexed and are consistent with the C2 space group. No detectable impurities were observed.

Powder diffraction from protein powders using in-house diffractometers is an effective tool for identification and monitoring of protein crystal forms and artifacts. As an alternative to conventional powder diffractometers a single crystal diffractometer equipped with an X-ray micro-source can be used to collect powder patterns from 1 µl samples. Using a small-angle X-ray scattering (SAXS) camera it is possible to collect data within minutes. A streamlined program has been developed for the calculation of powder patterns from pdb-coordinates, and includes correction for bulk-solvent. A number of such calculated powder patterns from insulin and lysozyme have been included in the powder diffraction database and successfully used for search-match identification. However, the fit could be much improved if peak asymmetry and multiple bulk-solvent corrections were included. When including a large number of protein data sets in the database some problems can be foreseen due to the large number of overlapping peaks in the low-angle region, and small differences in unit cell parameters between pdb-data and powder data. It is suggested that protein entries are supplied with more searchable keywords as protein name, protein type, molecular weight, source organism etc. in order to limit possible hits.

The crystal structure of edoxaban tosylate monohydrate has been solved and refined using synchrotron X-ray powder diffraction data, and optimized using density functional techniques. Edoxaban tosylate monohydrate crystallizes in space group P21 (#4) with a = 7.55097(2), b = 7.09010(2), c = 32.80420(21) Å, β = 96.6720(3)°, V = 1744.348(6) Å3, and Z = 2. The crystal structure consists of alternating layers of edoxaban cations and tosylate anions along the c-axis. The water molecules lie near the sulfonate end of the tosylate anions. The solid-state conformation of the edoxaban cation is determined by intermolecular interactions. The protonated nitrogen atom forms a strong N–H⋯O hydrogen bond to one of the tosylate oxygens. Only one of the water molecule hydrogens acts as a donor in an O–H⋯O hydrogen bond. The tosylate oxygens act as acceptors in a number of C–H⋯O hydrogen bonds. The powder pattern has been submitted to ICDD® for inclusion in the Powder Diffraction File™.