Polymer network formation is an important tool for tailoring mechanical properties of polymeric materials. One option to synthesize a network is the addition of bivalent crosslinkers reacting with functional groups present in a polymer. In case of polymer network syntheses based on biopolymers, performing such a crosslinking reaction in water is sometimes necessary in view of the solubility of the biopolymer, such as gelatin, and can be beneficial to avoid potential contamination of the formed material with organic solvents in view of applications in biomedicine. In the case of applying diisocyanates for the crosslinking in water, it is necessary to show that the low molecular weight bifunctional crosslinker has fully reacted, while tailoring of the mechanical properties of the resulting hydrogels is possible despite the complex reaction mechanism. Here, the formation of gelatin-based hydrogel networks with the diisocyanates 2,4-toluene diisocyanate, 1,4-butane diisocyanate, and isophorone diisocyanate is presented. It is shown that extensive washing of materials is required to ensure full conversion of the diisocyanates. The use of different diisocyanates gives hydrogels covering a large range of Young’s moduli (12-450 kPa). The elongations at break (up to 83%) as well as the maximum tensile strengths (up to 410 kPa) of the hydrogels described here are much higher than for lysine diisocyanate ethyl ester crosslinked gelatin reported before. Rheological investigations suggest that the network formation in some cases is due to physical interactions and entanglements rather than covalent crosslink formation.

Biomaterials require thorough in vitro testing before being applied in vivo. Unwanted contaminations of biomaterials but also their intrinsic properties can cause uncontrolled immune response leading to severe consequences for the patient. Therefore, immunological evaluation of materials for biomedical applications is mandatory before entering clinical application. In order to introduce physical netpoints, the aromatic compounds desaminotyrosine (DAT) and desaminotyrosyl-tyrosine (DATT) were successfully used to functionalize linear and star-shaped oligoethylene glycol (lOEG and sOEG) as previously described. The materials showed properties of surfactants and have potential to be used for solubilization of lipophilic drugs in water. Furthermore, the materials are susceptible for H2O2 degradation as determined by MALDI-ToF MS analyses. This is important for potential in vivo applications, as macrophages can release reactive oxygen species (ROS) under inflammatory conditions. As it is known that surfactant solutions of high concentration can lead to cell lysis, the effects of OEG-DAT(T) solutions on murine RAW macrophages were investigated. Even at highest OEG-DAT(T) concentration of 1000 µg·mL-1 the viability of the RAW cells was not significantly impaired. Additionally, the polymers were incubated with whole human blood and the production of inflammatory cytokines such as the tumor necrosis factor (TNF)-α and interleukin (IL)-6 was determined. Only at high concentrations, the OEG-DAT(T) solution induced low levels of TNF-α and IL-6, indicating that a mild inflammatory reaction could be expected when such high OEG-DAT(T) concentrations are applied in vivo. Similarly, the OEG-DAT(T) solution did not induce ROS in monocytes and neutrophils after incubation with whole human blood. Conclusively, the data presented here demonstrate that OEG-DAT(T) do not lead to a substantial activation of the innate immune mechanisms and could therefore be investigated for solubilizing pharmaceutical agents.

Gelatin can be covalently crosslinked in aqueous solution by application of diisocyanates like L-lysine diisocyanate ethyl ester in order to form hydrogels. Reaction of isocyanate groups with water is however a limiting factor in hydrogel network formation and can strongly influence the outcome of the crosslinking process. Here, diisocyanates with different water solubility and reactivity were applied for the formation of gelatin-based hydrogel networks and the mechanical properties of the hydrogels were investigated to gain a better understanding of starting material/ hydrogel property relations. L-Lysin diisocyanate ethyl ester (LDI), 2,4-toluene diisocyanate (TDI), 1,4-butane diisocyanate (BDI), and isophorone diisocyanate (IPDI) were selected, having different solubility in water ranging from 10-4 to 10-2 mol·L-1. BDI and LDI were estimated to have average reactive isocyanates groups, whereas TDI is highly reactive and IPDI has low reactivity. Formed hydrogels showed different morphologies and were partially very inhomogeneous. Gelation time (1 to 50 minutes), water uptake (300 to 900 wt.-%), and mechanical properties determined by tensile tests (E-moduli 35 to 370 kPa) and rheology (Shear moduli 4.5 to 19.5 kPa) showed that high water solubility as well as high reactivity leads to the formation of poorly crosslinked or inhomogeneous materials. Nevertheless, diisocyanates with lower solubility in water and low reactivity are able to form stable, homogeneous hydrogel networks with gelatin in water.

A major goal in the field of regenerative medicine is to improve our understanding of how biomaterial properties affect cells of the immune system. Systematic variation of defined chemical properties could help to understand which factors determine and modulate cellular responses. A series of copolymers poly[acrylonitrile-co-(N-vinylpyrrolidone)]s (P(AN-co-NVP)) served as model system, in which increasing hydrophilicity was adjusted by increasing the content related to the NVP based repeating units (nNVP) (0, 4.6, 11.8, 22.3, and 29.4 mol%). The influence of increasing nNVP contents on cellular response of human primary monocyte derived dendritic cells (DC), which play a key role in the initiation of immune responses, was investigated. It was shown using the LAL-Test as well as a macrophage-based assay, that the materials were free of endotoxins and other microbial contaminations, which could otherwise bias the readout of the DC experiments. The increasing nNVP content led to a slightly increased cell death of DC, whereas the activation status of DC was not systematically altered by the different P(AN-co-NVP)s as demonstrated by the expression of co-stimulatory molecule and cytokine secretion. Similarly, under inflammatory conditions mimicked by the addition of lipopolysaccharides (LPS), neither the expression of co-stimulatory molecules nor the release of cytokines was influenced by the different copolymers. Conclusively, our data showed that this class of copolymers does not substantially influence the viability and the activation status of DC.

Bone grafts, commonly performed to augment bone regeneration from autologous or alleogeneic sources, carry an enormous cost, estimated at upwards of 21 billion dollars per year. Hydroxyapatite (HAP) bio-ceramic has been widely used in clinic as a bone graft substitute material due to its biocompatibility and the similarity of its structure and composition to bone mineral. However, its applications are limited due to its lack of strength and toughness. Researchers have attempted to overcome these issues by combining HAP bio-ceramics into resorbable polymers to improve their mechanical properties. However, poor bonding between the HAP and the polymer caused separation at the polymer-filler interface. To overcome this, short chains of polymers were grafted directly from the hydroxyl groups on the surface of nanocrystalline HAP. Collagens, being the most abundant proteins in the body, and having suitable properties such as biodegradability, bioabsorbability with low antigenicity, high affinity to water, and the ability to interact with cells through integrin recognition, makes them a very promising candidate for the modification of the polymer surface. In this study, a novel method of synthesizing nano-hydroxyapatite (nHAP)-g-poly(lactide-co-glycolide)-g-collagen polymer was introduced. The synthesis process was carried out in several steps. First, poly (lactide-co-glycolide) (PLGA) polymer was directly grafted onto the hydroxyl group of the surface of n-HAP particles by ring-opening polymerization, and subsequently coupled with succinic anhydride. In order to activate the co-polymer for collagen attachment, the carboxyl end group obtained from succinic anhydride was reacted with N-hydroxysuccinimide (NHS) in the presence of dicyclohexylcarbodiimide (DCC) as the cross-linking agent. Finally, the activated co-polymer was attached to calf skin collagen type I, in hydrochloric acid/phosphate buffer solution and the precipitated co-polymer with attached collagen was isolated. The synthesis was monitored by 1H NMR and FTIR spectroscopies and the products after each step were characterized by thermal analysis (TGA and DSC). These composite materials will be tested as potential scaffolds for tissue engineering applications.

4-arm poly(ethylene glycol) end-capped with mimics of adhesive moiety found in mussel adhesive protein, dopamine, was combined with a biocompatible nano-silicate, Laponite, in creating a nanocomposite hydrogel with improved materials and adhesive properties. Dopamine’s ability to form both irreversible covalent (cohesive and interfacial) and reversible physical (with Laponite) crosslinks was exploited in creating an injectable tissue adhesive. Incorporation of Laponite did not interfere with the curing of the adhesive. In some instances, increasing Laponite content reduced gelation time as dopamine-Laponite bond reduced the required number of covalent bonds needed for network formation. Incorporation of Laponite also increased compressive materials properties (e.g., max strength, energy to failure, etc.) of the nanocomposite without compromising its compliance as strain at failure was also increased. From lap shear adhesion test using wetted pericardium as the substrate, incorporating Laponite increased work of adhesion by 5 fold over that of control. Strong, physical bonds formed between dopamine and Laponite increased bulk materials properties, which contributed to the enhanced adhesive properties.

Nitric oxide (NO) release can promote healthy tissue regeneration. A PEG-fibrinogen adhesive hydrogel that would allow for inducible NO release was created with mechanical properties that could be tailored to specific applications and tissue types. PEG (4-arm)-fibrinogen hydrogels of varying ratios were derivatized with S-nitroso-N-acetyl-D, L-penicillamine (SNAP)-thiolactone to create an active NO donor material. Controlled release from gels was established using light as the activating source, although temperature, pH, and external mechanical loading are also means to induce active NO release. Gels with varying ratios of fibrinogen to PEG were made, derivatized, and tested. Gels below a ratio of 1.5:1 (fibrinogen:PEG) did not gel, while at ratio of 1.5:1 gelation occurs and NO release can be induced. Interestingly, the release from 1.5:1 gels was significantly lower compared to 2:1 and 3:1 gel formulations. Rheometric data show that lower ratio gels are more elastic than viscous. Derivatized gels exhibited linear elastic moduli, behaving more like other more synthetic hydrogels. Swelling data indicates that as the ratio of fibrinogen to PEG increases the swelling ratio decreases, likely due to the hydrophobic nature of the NO donor. Cells remain viable on both derivatized and non-derivatized gels.

This paper reports on mechanical characterization of electrospun tissue scaffolds formed from varying blends of collagen and human tropoelastin. The electrospun tropoelastin-based scaffolds have an open, porous structure conducive to cell attachment and have been shown to exhibit strong biocompatibility, but the mechanical character is not well known. Mechanical properties were tested for scaffolds consisting of 100% tropoelastin and 1:1 tropoelastin-collagen blends. The results showed that the materials exhibited a three order of magnitude change in the initial elastic modulus when tested dry vs. hydrated, with moduli of 21 MPa and 0.011 MPa respectively. Noncrosslinked and crosslinked tropoelastin scaffolds exhibited the same initial stiffness from 0 to 50% strain, and the noncrosslinked scaffolds exhibited no stiffness at strains >∼50%. The elastic modulus of a 1:1 tropoelastin-collagen blend was 50% higher than that of a pure tropoelastin scaffold. Finally, the 1:1 tropoelastin-collagen blend was five times stiffer from 0 to 50% strain when strained at five times the ASTM standard rate. By systematically varying protein composition and crosslinking, the results demonstrate how protein scaffolds might be manipulated as customized biomaterials, ensuring mechanical robustness and potentially improving biocompatibility through minimization of compliance mismatch with the surrounding tissue environment. Moreover, the demonstration of strain-rate dependent mechanical behavior has implications for mechanical design of tropoelastin-based tissue scaffolds.

Our objective is to design nanostructured hybrid inorganic-biological materials using the selfassembly of functionalized nanotubes and lipid molecules. In this presentation, we summarize the multiple control parameters which direct the equilibrium morphology of a specific class of nanostructured biomaterials. Individual lipid molecules are composed of a hydrophilic head group and two hydrophobic tails. A bare nanotube encompasses an ABA architecture, with a hydrophobic shaft (B) and two hydrophilic ends (A). We introduce hydrophilic hairs at one end of the tube to enable selective transport through the channel. The dimensions of the nanotube are set to minimize its hydrophobic mismatch with the lipid bilayer. We use a Molecular Dynamicsbased mesoscopic simulation technique called Dissipative Particle Dynamics which simultaneously resolves the structure and dynamics of the nanoscopic building blocks and the hybrid aggregate. The amphiphilic lipids and functionalized nanotubes self-assemble into a stable hybrid vesicle or a bicelle in the presence of a hydrophilic solvent. We demonstrate that the morphology of the hybrid structures is directed by factors such as the temperature, the molecular rigidity of the lipid molecules, and the concentration of the nanotubes. We present material characterization of the equilibrium morphology of the various hybrid nanostructures. A combination of the material characterization and the morphologies of the hybrid aggregates can be used to predict the structure and properties of other hybrid materials.

Multifunctional polymer-based biomaterials, which combine degradability and shapememory capability, are promising candidate materials for biomedical implants. An example is a degradable multiblock copolymer (PDC), composed of poly(p-dioxanone) (PPDO) as hard and poly(ε-caprolactone) (PCL) as switching segments. PDC exhibits a unique linear mass loss during hydrolytic degradation, which can be tailored by the PPDO to PCL weight ratio, as well as an excellent thermally induced dual-shape effect. PDC can be synthesized by co-condensation of two oligomeric macrodiols (PCL-diol and PPDO-diol) using aliphatic diisocyanates as coupling agent. Here, we investigated whether different morphologies could be obtained for PDCs synthesized from identical oligomeric macrodiols (PCL-diol with Mn = 2000 g·mol-1 and PPDO-diol with Mn = 5300-5500 g·mol-1) with 2, 2(4), 4-trimethyl-hexamethylene diisocyanate (TMDI) and 1, 6-hexamethylene diisocyanate (HDI), respectively. More specifically, atomic force microscopy (AFM) was utilized for an investigation of the surface morphologies in solution casted PDC thin films in the temperature range from 20 °C to 60 °C. The results obtained in differential scanning calorimetry (DSC) and AFM demonstrated that different morphologies were obtained when TMDI (PDC-TMDI) or HDI (PDC-HDI) were used as linker. PCL related crystals in PDC-HDI were more heterogeneous and less ordered than those in PDCTMDI, while HDI resulted in a larger degree of crystallinity than TMDI. This research provides some new suggestions for choosing a suitable coupling agent to tailor the required morphologies and properties of SMPs with crystallizable switching segments.

Thin silicate nanoplatelets, derived from the exfoliation of natural Sodium montmorillonite (Na+-MMT) clays, show an unexpected antimicrobial property. A physical trapping mechanism has been proposed because the clay nanoplatelets can indiscriminately inhibit the growth of a broad spectrum of bacteria, including drug-resistant species such as methicillin-resistance S. aureus (MRSA) and silver ion-resistant E. coli. The ability to generate singlet oxygen species was first observed for the clay platelets that showed a high-aspect-ratio geometric shape and the presence of surface ionic charges. By comparison, the pristine clay with a multilayered structure failed to generate any singlet oxygen species. The ability to emit singlet oxygen species provides direct evidence for the antimicrobial ability of clay through a non-chemical mechanism, which opens the potential for medical use.

The aim of this work is to improve bone-implant bonding. This can, potentially, be achieved through the use of an implant coating composed of fibre networks. It is hypothesised that such an implant can achieve strong peri-prosthetic bone anchorage, when seeded with human mesenchymal stem cells (hMSCs). The materials employed were 444 and 316L stainless steel fibre networks of the same fibre volume fraction. The present work confirms that hMSCs are able to proliferate and differentiate towards the osteogenic lineage when seeded onto the fibre networks. Cellular viability, proliferation and metabolic activity were assessed and the results suggest higher proliferation rates when hMSC are seeded onto the 444 networks as compared to 316L. Cell distribution was found uniform across the seeded surfaces with 444 showing a somewhat higher infiltration depth.

Neutral, hydrophilic, polymer-based architectures are widely investigated for a wide range of biomedical applications from drug-conjugates to delivery systems and scaffolds for regenerative therapies. In most cases, it is crucial that biomaterials provide a blank, inert background in order to hinder unspecific cell-material interactions so that protein mediated biological events leading to foreign body reactions are prevented. Hydrophilic polyglycerol-based polymer network films are a recently developed class of amorphous macroscopic materials, which offer great versatility in design and control of resultant properties. In this study, protein adsorption on polyglycerol-based polymer network films is investigated by using Micro BCA protein assay for three types of proteins having critical roles in the human body, and various copolymer networks with differing sidechains and crosslink densities.

The influence of material properties on bacterial attachment to surfaces needs to be understood when applying polymer-based biomaterials. Positively charged materials can kill adhered bacteria when the charge density is sufficiently high [1] but such materials initially increase the adherence of some bacteria such as Escherichia coli [2]. On the other hand, negatively charged materials have been shown to inhibit initial bacterial adhesion [3], but this effect has only been demonstrated in relatively few biomaterial classes and needs to be evaluated using additional systems. Gradients in surface charge can impact bacterial adhesion and this was tested in our experimental setup.

Moreover, the evaluation of bacterial adhesion to biomaterials is required to assess their potential for biological applications. Here, we studied the bacterial adhesion of E. coli and Bacillus subtilis on the surfaces of acrylonitrile-based copolymer samples with different amounts of 2-methyl-2-propene-1-sulfonic acid sodium salt (NaMAS) comonomer. The content related to NaMAS based repeating units nNaMAS varied in the range from 0.9 to 1.5 mol%.

We found a reduced colonized area of E. coli for NaMAS containing copolymers in comparison to pure PAN materials, whereby the bacterial colonization was similar for copolymers with different nNaMAS amounts. A different adhesion behavior was obtained for the second tested organism B. subtilis, where the implementation of negative charges into PAN did not change the overall adhesion pattern. Furthermore, it was observed that B. subtilis adhesion was significantly increased on copolymer samples that exhibited a more irregular surface roughness.

Titanium (Ti) is the material of choice for orthopaedic applications because it is biocompatible and encourages osteoblast ingrowth. It was shown that the biocompatibility of Ti metal is due to the presence of a thin native sub-stoichiometric titanium oxide layer which enhances the adsorption of mediating proteins on the surface [1]. The present studies were devised to evaluate the adhesion, survival, and growth of cells on the surface of new engineered nano-crystal films of titanium and titanium oxides and compare them with orthopaedic-grade titanium with microcrystals. The engineered nano-crystal films with hydrophilic properties are produced by employing an ion beam assisted deposition (IBAD) technique. IBAD combines physical vapor deposition with concurrent ion beam bombardment in a high vacuum environment to produce films (with 3 to 70 nm grain size) with superior properties. These films are “stitched” to the artificial orthopaedic implant materials with characteristics that affect the wettability and mechanical properties of the coatings.

To characterize the biocompatibility of these nano-engineered surfaces, we have studied osteoblast function including cell adhesion, growth, and differentiation on different nanostructured samples. Cell responses to surfaces were examined using SAOS-2 osteoblast-like cells. We also studied a correlation between the surface nanostructures and the cell growth by characterizing the SAOS-2 cells with immunofluorescence and measuring the amount alizarin red concentration produced after 7 and 14 days. The number of adherent cells was determined by means of nuclei quantification on the nanocrystalline Ti, TiO2, and microcrystalline Ti and analysis was performed with Image J. Our experimental results indicated that nanocrystalline TiO2 is superior to both nano and microcrystalline Ti in supporting growth, adhesion, and proliferation. Improving the quality of surface oxide, i.e. fabricating stoichiometric oxides as well as nanoengineering the surface topology, is crucial for increasing the biocompatibility of Ti implant materials.

Polymers possessing antimicrobial activity have been used for self sterilization surfaces as well as agents for treating contaminated water. Cationic polymers based on quaternary ammonium or guanidine groups have shown high inherent antimicrobial activity where the activity is related to the disruption of the microorganism cell wall. A range of antimicrobial nanoparticles possessing active quaternary ammonium groups with one of the alkyl is a an octyl chain have been synthesized. These nanoparticles were incorporated in dental restoration compositions to form self sterile composites. Quaternary ammonium polyethyleneimine nanoparticles with N-octyl dimethyl residues, demonstrated high antibacterial effect.

The peptide-DNA complex was investigated by using molecular dynamics simulation to analyze the transfection efficiency of cationic amphipathic peptide. Previously, the cationic peptide, LFampinB, with positively charged amino acid residues of Lysines was used to investigate the orientation and interaction energies for entering the cell though disruption of the endosomal membrane. The same interactions were obtained for N-terminus of the LFampinB peptide with membrane and with plasmid DNA. The N-terminus of LFampinB can bind at minor groove of DNA to make complexation of the peptide with DNA.

Capillary-driven microfluidics, utilizes the capillary force generated by fibrous hydrophilic materials (e.g., paper and cotton) to drive biological reagents, has been extended to various biological and chemical analyses recently. However, the restricted capillary-driving mechanism persists to be a major challenge for continuous and facilitated biofluidic transport. In this abstract, we have first introduced a new interfacial microfluidic transport principle to automatically and continuously drive three-dimensional liquid flows on a micropatterned superhydrophobic textile (MST). Specifically, the MST platform utilizes the surface tension-induced Laplace pressure to facilitate the liquid motion along the fibers, in addition to the capillary force existing in the fibrous structure. The surface tension-induced pressure can be highly controllable by the sizes of the stitching patterns of hydrophilic yarns and the confined liquid volume. Moreover, the fluidic resistances of various configurations of connecting fibers are quantitatively investigated. Furthermore, a demonstration of the liquid collection ability of MST has been demonstrated on an artificial skin model. The MST can be potentially applied to large volume and continuous biofluidic collection and removal.

Phase-segregated multiblock copolymers (MBC) as well as covalently crosslinked multiphase polymer networks, which are composed of crystallizable oligo(ε-caprolactone) (OCL) and oligo(ω-pentadecalactone) (OPDL) segments have been recently introduced as degradable polymer systems exhibiting various memory effects. Both types of copolyesterurethane networks can be synthesized via co-condensation of the respective hydroxytelechelic oligomers and 2,2(4),4-trimethyl-hexamethylene diisocyanate (TMDI) as aliphatic linker.

In this work the dual-shape properties as well as the temperature-memory capability of thermoplastics and covalently crosslinked copolyesterurethanes containing OCL and OPDL domains are explored. Both copolyesterurethane networks exhibited excellent dual-shape properties with high shape fixity ratios Rf ≥ 93% and shape recovery ratios in the range of 92% to 100% determined in the 2nd and 3rd test cycle, whereby the dual-shape performance was substantially improved when covalent crosslinks are present in the copolymer.

A pronounced temperature-memory effect was achieved for thermoplastic as well as crosslinked copolyesterurethanes. Hereby, the switching temperature Tsw could be adjusted via the variation of the applied deformation temperature Tdeform in the range from 32 °C to 53 °C for MBC and in the range from 29 °C to 78 °C for multiphase polymer networks.

Composites from magnetic nanoparticles in a shape-memory polymer (SMP) matrix allow a remote actuation of the shape-memory effect by exposure to alternating magnetic fields. At the same time the incorporation of MNP may affect the thermal properties and the structural functions of the SMP.

Here, we explored the adjustability of the recovery force as an important structural function in magnetic shape-memory nanocomposites (mSMC) by variation of the programing temperature (Tprog) and nanoparticle weight content. The nanocomposites were prepared by coextrusion of silica coated magnetite nanoparticles (mNP) with an amorphous polyether urethane (PEU) matrix. In tensile tests in which Tprog was varied between 25 and 70 °C and the particle content from 0 to 10 wt% it was found that the Young’s moduli (E) decreased with temperature and particle content. Cyclic, thermomechanical experiments with a recovery module under strain-control conditions were performed to monitor the effect of mNP and Tprog on the recovery force of the composites. During the strain-control recovery the maximum stress (σm,r) at a characteristic temperature (Tσ,max) was recorded. By increasing the mNP content from 0 to 10 wt% in composites, σm,r of 1.9 MPa was decreased to 1.25 MPa at a Tprog = 25 °C. A similar decrease in σm,r for nanocomposites with different mNP content could be observed when Tprog was increased from 25 °C to 70 °C. It can be concluded that the lower the deformation temperature and the particle content the higher is the recovery force.