With rapid growth of human population and decreasing labefaction of our environment, the usable fresh water is facing severe pollution and global shortage. Bio-inspired engineering and biotemplate-directed engineering thus offer great promise in clean water generation, including desalination, decontamination, and disinfection. This perspective begins with an introduction of solar energy-based interfacial evaporation system inspired by the natural systems of organisms, and then provides a review of the development and recent progress of the interfacial evaporation system for clean water generation. The long-term outlook in this field of clean water generation using bio-inspired interfacial systems is also discussed.

Nanoscale magnetization modulation by electric field enables the construction of low-power spintronic devices for information storage applications and, etc. Electric field-induced ion migration can introduce desired changes in the material's stoichiometry, defect profile, and lattice structure, which in turn provides a versatile and convenient means to modify the materials’ chemical-physical properties at the nanoscale and in situ. In this review, we provide a brief overview on the recent study on nanoscale magnetization modulation driven by electric field-induced migration of ionic species either within the switching material or from external sources. The formation of magnetic conductive filaments that exhibit magnetoresistance behaviors in resistive switching memory via foreign metal ion migration and redox activities is also discussed. Combining the magnetoresistance and quantized conductance switching of the magnetic nanopoint contact structure may provide a future high-performance device for non-von Neumann computing architectures.

Nanohybrids containing graphene and bismuth ferrite have been actively employed as efficient photo-catalysts these days owing to the low rate of charge carrier's (e−–h+) recombination, moderate surface area with a suitable range of band-gaps. We have synthesized nanohybrids of graphene oxide (GO) and doped BiFeO3 using a co-precipitation method and the doping elements were lanthanum and manganese, hence called BLFMO/GO nanohybrids. The surface area of BLFMO [La = 15% increased from 6.8 m2/g (for pure) to 62.68 m2/g (in nanohybrid)]. Also, the bandgap of the BLFMO/GO nanohybrid reduced significantly up to 1.75 eV. The resulting BLFMO/GO nanohybrid represents significantly higher catalytic activity (96% in 30 min) than the pure BiFeO3 (30% in 30 min).

The complex interaction between hematopoietic stem cells (HSCs) and their microenvironment in the human bone marrow ensures a life-long blood production by balancing stem cell maintenance and differentiation. This so-called HSC niche can be disturbed by malignant diseases. Investigating their consequences on hematopoiesis requires a deep understanding of how the niches function in health and disease. To facilitate this, biomimetic models of the bone marrow are needed to analyze HSC maintenance and hematopoiesis under steady state and diseased conditions. Here, 3D bone marrow models, their fabrication methods (including 3D bioprinting), and implementations recapturing bone marrow functions in health and diseases are presented.

In this topical review of two-photon stereolithography (TPS), we discuss novel materials and demonstrate applications of this technology. Two-photon-initiated chemical processes are used to fabricate arbitrary three-dimensional structures in TPS. In the first part of this article, the development of novel photoactive materials to fabricate pure inorganic or organic–inorganic hybrid microstructures is discussed. The second part discusses the fabrication of functional microstructures for highly specific applications to demonstrate the importance of TPS in different fields of science.

We propose a device to secure random data in analog format, so that it is taken off the digital grid. Such action will turn off the means by which remote hackers violate security. A physical “rock” manufactured through 3D printing technology, constructed on the basis of high-grade randomness, which is packed into the comprising materials of that rock. The rock functions as an oracle, and does not allow any massive copy of its content. Thus, a major claim of this Prospective is that materials science and engineering may hold the keys to the future of cryptography.

A review is given of the future device processing needs for Ga2O3 power electronics. The two main devices employed in power converters and wireless charging systems will be vertical rectifiers and metal oxide semiconductor field effect transistors (MOSFETs). The rectifiers involve thick epitaxial layers on conducting substrates and require stable Schottky contacts, edge termination methods to reduce electric field crowding, dry etch patterning in the case of trench structures, and low resistance Ohmic contacts in which ion implantation or low bandgap interfacial oxides are used to minimize the specific contact resistance. The MOSFETs also require spatially localized doping enhancement for low source/drain contact resistance, stable gate insulators with acceptable band offsets relative to the Ga2O3 to ensure adequate carrier confinement, and enhancement mode capability. Attempts are being made to mitigate the absence of p-type doping capability for Ga2O3 by developing p-type oxide heterojunctions with n-type Ga2O3. Success in this area would lead to minority carrier devices with better on-state performance and a much-improved range of functionality, such as p-i-n diodes, Insulated Gate Bipolar Transistors, and thyristors.

Direct urea fuel cells were fabricated using CuNi-plated polymer cloth for anode catalyst and current collector, and Pt-black for cathode catalyst. The output power was significantly enhanced by coating the CuNi cloth with a conducting polymer, poly(3,4-ethylenedioxythiophene)polystyrene sulfonate (PEDOT*PSS). The open circuit voltage, 0.80 V and the maximum output power, 3.0 mW/cm2 were obtained for the fuel of 0.5 M urea water solution under ambient conditions. Improvement over the cell structure demonstrated to lighten a light emitting diode.

The glass surfaces used for optical devices are necessary to have high transparency. Here we propose to take advantage of tube-like SiO2 textures to trap lubricant liquid inside aiming to prepare novel slippery liquid-infused porous surfaces (SLIPS). As a consequence, SLIPS with high transparency were synthesized on glass substrate successfully. The capillary action of unique tubular structure induces the ion migration of adjacent Krytox 100, thus endowing SLIPS with the self-healing property. Moreover, the remarkable slip behavior enables these surfaces to possess the self-cleaning and anti-biofouling performances. The current work might provide a promising candidate for long-term transparent optical devices.

We previously demonstrated that electrode architectures comprising nanoscale birnessite-like MnOx affixed to three-dimensional carbon nanofoam (CNF) scaffolds offer performance advantages when used as cathodes in rechargeable zinc-ion cells. To discern chemical and physical changes at the MnOx@CNF electrode upon deep charge/discharge in aqueous Zn2+-containing electrolytes, we deploy electroanalytical methods and ex situ characterization by microscopy, elemental analysis, x-ray photoelectron spectroscopy, x-ray diffraction, and x-ray pair distribution function analyses. Our findings verify that redox processes at the MnOx are accompanied by reversible precipitation/dissolution of crystalline zinc hydroxide sulfate (Zn4(OH)6(SO4)·xH2O), mediated by the more uniformly reactive electrode structure inherent to the CNF scaffold.

Ab initio microkinetic modeling was performed to study ethanol conversion to acetaldehyde on Pt-based bimetallic alloys in a non-oxidative environment. Alloying Pt with Au, Ag, Cu, Co, Ni, Zn, Cd, Al, Ga, In, Tl, Ge, Sn, Pb, As, and Sb showed an increase in product turnover by at least an order of magnitude compared with Pt at 423 K. This was correlated to the increased stabilization of CH3CHO species over these alloys. Among the alloy candidates; Pt3Cu, Pt3Zn, Pt3Ga, Pt3Ge, Pt3Sb, and Pt3Pb were found to be more active than Pt.

Yarn-type supercapacitors should have high energy density in small given spaces, and the one attempt among many is to comprise the electrodes asymmetrically. However, the low capacitance of conventional materials causes the widened operating voltage useless. In this study, we have utilized a novel material MXene with carbon nanotubes (CNTs) to make highly loaded MXene/CNT yarn electrodes, which exhibited a remarkable areal capacitance. With MnO2/CNT biscrolled cathode and PVA/LiCl gel electrolyte, the plied asymmetric yarn supercapacitor had energy density of 100 µWh/cm2. The yarn supercapacitor could operate under mechanical deformations without performance degradation.

We report the synthesis of a novel polymer gel electrolyte primarily based on cellulose extracted from wood along with gelatin, polyacrylic acid (PAA) and potassium hydroxide (KOH) added as additives in minute amounts in various stages. We also study and report the variation of ionic conductivity with variation of various additives. We found that, with variation of additives to hydrogel, its stability and degree of crystallinity are varied. The results were confirmed using x-ray diffraction and Fourier transform infrared spectra studies. An average best ionic conductivity of 96.89mS/cm was reported for a hydrogel: gelatin: PAA: KOH system, which is one of the best reported values of ionic conductivity for gel electrolytes.

Inkjet printing is a promising technology providing cost-effective method for processing various materials on deformable substrates. In this work, linear and serpentine inkjet printed interconnects on two different substrates were fabricated and electromechanically characterized. A particular attention was given to the optimization of the process parameters; high quality can be achieved only printing slowly in vertical direction and optimizing the drop spacing to the specific pattern. The electromechanical results showed that the geometrical layout and printing direction strongly affect the printing quality and the electromechanical response; serpentine shapes should be preferred to straight interconnects as better gauge factors are obtained.

By electron-beam (e-beam) melting, we prepared 0.4 wt% carbon-infused copper (CuCv4), and a copper control without carbon addition (CuCv0). Scanning electron microscopy and helium ion microscopy (HIM) were performed on the as-solidified surface, fracture surface, and ion-polished surface of the CuCv4 sample. The results revealed that graphitic carbon flakes cover the as-solidified surface, and carbon nanoparticles and clusters exist in the fracture and ion-polished surfaces. HIM on the ion-polished surface revealed a unique ripple-shaped feature, which is possibly associated with the infusion of carbon nanoribbons in the copper matrix. The bulk densities were measured to be 8.86 and 8.53 g/cm3, which correspond to relative densities of 98.9% and 96.4% for the CuCv0 and CuCv4 samples, respectively. In addition, apparent electrical conductivities were measured to be 56.9 and 57.5 MS/m, respectively, for the e-beam melted CuCv0 and CuCv4 samples. These values correspond to true electrical conductivities of 100.5% IACS (International Annealed Copper Standard) and 107.4% IACS after correction for the porosity. Our results reveal remarkable promise of using covetic copper for the next generation conductors in energy applications from microelectronic devices to high-power transmission cables.

A specialized dealloying technique called thermal dealloying was developed over 10 years ago for certain biomedical materials. This method is not widely used for synthesizing nanoporous metals. However, it offers advantages over conventional dealloying processes for fabrication of nanoporous structures, and is highly suitable for refractory metals that may be susceptible to oxidation during chemical/electrochemical dealloying and liquid metal dealloying. In this study, nanoporous structures were successfully fabricated from magnesium-based precursor alloys via sublimation of magnesium at elevated temperature under vacuum conditions. Different refractory metal diffusion rates affect the resulting density and amount of retained magnesium in each nanoporous material.

This paper discusses the unique patterns evolved through phase separation of a bulk liquid crystal (LC) from the self-assembly of lysozyme induced by evaporation of de-ionized water only. Each domain shows a central dark region surrounded by bright regions (randomly oriented LC droplets). The birefringence intensity reveals three regimes (a slow increase, rapid rise, then saturation) not seen without LC droplets. The textural study exhibits a simple exponential behavior that changes as a function of LC concentration. Furthermore, in the presence of LC, the crack patterns are found to be different near the drop edge than those in the central region.

Flexible piezoelectric generators (PEGs) present a unique opportunity for renewable and sustainable energy harvesting. Here, we present a low-temperature and low-energy deposition method using solvent evaporation-assisted three-dimensional printing to deposit electroactive poly(vinylidene fluoride) (PVDF)-trifluoroethylene (TrFE) up to 19 structured layers. Visible-wavelength transmittance was above 92%, while ATR-FTIR spectroscopy showed little change in the electroactive phase fraction between layer depositions. Electroactivity from the fabricated PVDF-TrFE PEGs showed that a single structured layer gave the greatest output at 289.3 mV peak-to-peak voltage. This was proposed to be due to shear-induced polarization affording the alignment of the fluoropolymer dipoles without an electric field or high temperature.

Direct determination of barrier height (ΦBH) value between Ir and single crystal (001) hydrogen-terminated diamond with lightly boron doped has been performed using x-ray photoelectron spectroscopy technique. 70 nm Ir islands were formed on hydrogen-terminated diamond surface using anodic aluminum oxide. The ΦBH value for Ir/hydrogen-terminated diamond was −0.43 ± 0.14 eV, indicating that Ir was a suitable metal for ohmic contact with hydrogen-terminated diamond. The band diagram of Ir/hydrogen-terminated diamond was obtained. The experimental ΦBH was compared with the theoretical ΦBH in this work.