Hostname: page-component-78c5997874-j824f Total loading time: 0 Render date: 2024-11-09T16:18:29.476Z Has data issue: false hasContentIssue false
  • English
  • Français

Cellulose hydrogel as a flexible gel electrolyte layer

Published online by Cambridge University Press:  30 January 2019

Aswani Poosapati ,
Eunhwa Jang ,
Deepa Madan Open the ORCID record for Deepa Madan [Opens in a new window] ,
Nathaniel Jang ,
Liangbing Hu  and
Yucheng Lan
Aswani Poosapati
Affiliation:
Department of Mechanical Engineering, University of Maryland, Baltimore County, MD 21250, USA
Eunhwa Jang
Affiliation:
Department of Mechanical Engineering, University of Maryland, Baltimore County, MD 21250, USA
Deepa Madan*
Affiliation:
Department of Mechanical Engineering, University of Maryland, Baltimore County, MD 21250, USA
Nathaniel Jang
Affiliation:
Department of Material Science and Engineering, University of Maryland, College Park, MD 20740, USA
Liangbing Hu
Affiliation:
Department of Material Science and Engineering, University of Maryland, College Park, MD 20740, USA
Yucheng Lan
Affiliation:
Department of Physics, Morgan State University, Baltimore, MD 21251, USA
*
Address all correspondence to Deepa Madan at [email protected]
Get access

Abstract

We report the synthesis of a novel polymer gel electrolyte primarily based on cellulose extracted from wood along with gelatin, polyacrylic acid (PAA) and potassium hydroxide (KOH) added as additives in minute amounts in various stages. We also study and report the variation of ionic conductivity with variation of various additives. We found that, with variation of additives to hydrogel, its stability and degree of crystallinity are varied. The results were confirmed using x-ray diffraction and Fourier transform infrared spectra studies. An average best ionic conductivity of 96.89mS/cm was reported for a hydrogel: gelatin: PAA: KOH system, which is one of the best reported values of ionic conductivity for gel electrolytes.

Type
Research Letters
Information
MRS Communications , Volume 9 , Issue 1 , March 2019 , pp. 122 - 128
Copyright
Copyright © Materials Research Society 2019 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Zhang, S.S.: A review on the separators of liquid electrolyte Li-ion batteries. J. Power Sources 164, 351–364 (2007).Google Scholar
2.Gray, F.M. and Gray, F.M.: Solid Polymer Electrolytes: Fundamentals and Technological Applications (VCH, New York, 1991).Google Scholar
3.Scrosati, B., ed.: Applications of Electroactive Polymers (Chapman & Hall, London, 75, 1993).Google Scholar
4.Gray, F.M.: Polymer Electrolytes. Royal Society of Chemistry (VCH, New York, 1997).Google Scholar
5.MacCallum, J.R. and Vincent, C.A., eds.: Polymer Electrolyte Reviews (Springer Science & Business Media, New York, 2, 1989).Google Scholar
6.Meyer, W.H.: Polymer electrolytes for lithium-ion batteries. Adv. Mater. 10, 439–448 (1998).Google Scholar
7.Song, J.Y., Wang, Y.Y., and Cv Wan, C.: Review of gel-type polymer electrolytes for lithium-ion batteries. J. Power Sources 77, 183–197 (1999).Google Scholar
8.Armand, M. and Tarascon, J-M.: Building better batteries. Nature 451, 652 (2008).Google Scholar
9.Goodenough, J.B.: Rechargeable batteries: challenges old and new. J. Solid State Electrochem. 16, 2019–2029 (2012).Google Scholar
10.Tsuchida, E., Ohno, H., and Tsunemi, K.: Conduction of lithium ions in polyvinylidene fluoride and its derivatives—I. Electrochim. Acta 28, 591–595 (1983).Google Scholar
11.Alamgir, M. and Abraham, K.M.: Room temperature rechargeable polymer electrolyte batteries. J. Power Sources 54, 40–45 (1995).Google Scholar
12.Tsunemi, K., Ohno, H., and Tsuchida, E.: A mechanism of ionic conduction of poly (vinylidene fluoride)-lithium perchlorate hybrid films. Electrochim. Acta 28, 833–837 (1983).Google Scholar
13.Fauvarque, J.F., Guinot, S., Bouzir, N., Salmon, E., and Penneau, J.F.: Alkaline poly (ethylene oxide) solid polymer electrolytes. Application to nickel secondary batteries. Electrochim. Acta 40, 2449–2453 (1995).Google Scholar
14.Guinot, S., Salmon, E., Penneau, J.F., and Fauvarque, J.F.: A new class of PEO-based SPEs: structure, conductivity and application to alkaline secondary batteries. Electrochim. Acta 43, 1163–1170 (1998).Google Scholar
15.Yang, C-C.: Polymer Ni–MH battery based on PEO–PVA–KOH polymer electrolyte. J. Power Sources 109, 22–31 (2002).Google Scholar
16.Yang, C-C. and Lin, S-J..: Alkaline composite PEO–PVA–glass-fibre-mat polymer electrolyte for Zn–air battery. J. Power Sources 112, 497–503 (2002).Google Scholar
17.Gilbert, M.: Crystallinity in poly (vinyl chloride). J. Macromol. Sci. Part C: Polym. Rev. 34, 77–135 (1994).Google Scholar
18.Awadhia, A., Patel, S.K., and Agrawal, S.L.: Dielectric investigations in PVA based gel electrolytes. Prog. Cryst. Growth Charact. Mater. 52, 61–68 (2006).Google Scholar
19.Patel, S.K., Awadhia, A., and Agrawal, S.L.: Thermal and electrical studies on composite gel electrolyte system: PEG–PVA–(NH4CH2CO2)2. Phase Transitions 82, 421–432 (2009).Google Scholar
20.Ueberschlag, P.: PVDF piezoelectric polymer. Sens. Rev. 21, 118–126 (2001).Google Scholar
21.Park, J., Park, M., Nam, G., Lee, J.S., and Cho, J.: All-solid-state cable-type flexible zinc–air battery. Adv. Mater. 27, 1396–1401 (2015).Google Scholar
22.Fenton, D.E.: Complexes of alkali metal ions with poly (ethylene oxide). Polymer 14, 589 (1973).Google Scholar
23.Wright, P.V.: Electrical conductivity in ionic complexes of poly (ethylene oxide). Br. Polym. J. 7, 319–327 (1975).Google Scholar
24.Armand, M.B., Chabagno, J.M., and Duclot, M.J.: Fast Ion Transport in Solids, edited by Vashishta, P., Mundy, J.N. & Shenoy, G.K. (Electrode and Electrolytes Conference, Materials Science (B2400): United States, 23, 771 (1979).Google Scholar
25.Iwakura, C., Nohara, S., Furukawa, N., and Inoue, H.: The possible use of polymer gel electrolytes in nickel/metal hydride battery. Solid State Ionics 148, 487–492 (2002).Google Scholar
26.Lewandowski, A., Katarzyna, S., and Malinska, J.: Novel poly (vinyl alcohol)–KOH–H2O alkaline polymer electrolyte. Solid State Ionics 133, 265–271 (2000).Google Scholar
27.Kumar, G.G. and Sampath, S.: Electrochemical characterization of poly (vinylidenefluoride)-zinc triflate gel polymer electrolyte and its application in solid-state zinc batteries. Solid State Ionics 160, 289–300 (2003).Google Scholar
28.Wu, G.M., Lin, S.J., and Yang, C.C.: Preparation and characterization of PVA/PAA membranes for solid polymer electrolytes. J. Membr. Sci. 275, 127–133 (2006).Google Scholar
29.Wu, G.M., Lin, S.J., and Yang, C.C.: Alkaline Zn-air and Al-air cells based on novel solid PVA/PAA polymer electrolyte membranes. J. Membr. Sci. 280, 802–808 (2006).Google Scholar
30.Zhu, H., Fang, Z., Preston, C., Li, Y., and Hu, L.: Transparent paper: fabrications, properties, and device applications. Energy Environ. Sci. 7, 269–287 (2014).Google Scholar
31.Zhu, H., Luo, W., Ciesielski, P.N., Fang, Z., Zhu, J.Y., Henriksson, G., and Hu, L.: Wood-derived materials for green electronics, biological devices, and energy applications. Chem. Rev. 116, 9305–9374 (2016).Google Scholar
32.Zhu, H., Fang, Z., Wang, Z., Dai, J., Yao, Y., Shen, F., and Yu, Q.: Extreme light management in mesoporous wood cellulose paper for optoelectronics. ACS Nano 10, 1369–1377 (2015).Google Scholar
33.Huang, C-I. and Chen, J-R.: Crystallization and chain conformation of semi crystalline and amorphous polymer blends studied by wide-angle and small-angle scattering. J. Polym. Sci., Part B: Polym. Phys. 39, 2705–2715 (2001).Google Scholar
34.Golodnitsky, D., Strauss, E., Peled, E., and Greenbaum, S.: On order and disorder in polymer electrolytes. J. Electrochem. Soc. 162, A2551–A2566 (2015).Google Scholar
35.Koul, V., Mohamed, R., Kuckling, D., Adler, H.J.P., and Choudhary, V.: Interpenetrating polymer network (IPN) nanogels based on gelatin and poly (acrylic acid) by inverse miniemulsion technique: synthesis and characterization. Colloids Surf., B 83, 204–213 (2011).Google Scholar
36.Jaipan, P., Nguyen, A., and Narayan, R.J.: Gelatin-based hydrogels for biomedical applications. MRS Commun. 7, 416–426 (2017).Google Scholar
37.Dash, R., Foston, M., and Ragauskas, A.J.: Improving the mechanical and thermal properties of gelatin hydrogels cross-linked by cellulose nanowhiskers. Carbohydr. Polym. 91, 638–645 (2013).Google Scholar
38.Draye, J.P., Delaey, B., Van de Voorde, A., Van Den Bulcke, A., De Reu, B., and Schacht, E.: In vitro and in vivo biocompatibility of dextran dialdehyde cross-linked gelatin hydrogel films. Biomaterials 19, 1677–1687 (1998).Google Scholar
39.Chang, W.H., Chang, Y., Lai, P.H., and Sung, H.W.: A genipin-crosslinked gelatin membrane as wound-dressing material: in vitro and in vivo studies. J. Biomater. Sci., Polym. Ed. 14, 481–495 (2003).Google Scholar
40.Burugapalli, K., Bhatia, D., Koul, V., and Choudhary, V.: Interpenetrating polymer networks based on poly (acrylic acid) and gelatin. I: swelling and thermal behavior. J. Appl. Polym. Sci. 82, 217–227 (2001).Google Scholar
41.Agrawal, S.L. and Shukla, P.K.: Dielectric studies on PVA–NH4SCN complexes. Phys. Status Solidi (a) 163, 247–254 (1997).Google Scholar
42.Reddy, C.V.S., Jin, A.P., Han, X., Zhu, Q.Y., Mai, L.Q., and Chen, W.: Preparation and characterization of (PVP + V2O5) cathode for battery applications. Electrochem. Commun. 8, 279–283 (2006).Google Scholar
43.Smitha, B., Sridhar, S., and Khan, A.A.: Polyelectrolyte complexes of chitosan and poly (acrylic acid) as proton exchange membranes for fuel cells. Macromolecules 37, 2233–2239 (2004).Google Scholar