An overview on current trends in stimulated Brillouin scattering and optical phase conjugation is given. This report is based on the results of the “Second International Workshop on stimulated Brillouin scattering and phase conjugation” held in Potsdam/Germany in September 2007. The properties of stimulated Brillouin scattering are presented for the compensation of phase distortions in combination with novel laser technology like ceramics materials but also for e.g., phase stabilization, beam combination, and slow light. Photorefractive nonlinear mirrors and resonant refractive index gratings are addressed as phase conjugating mirrors in addition.

Electron acceleration by a chirped laser pulse in an azimuthal magnetic field in a plasma has been studied. The betatron resonance saturates and the electrons start losing energy beyond a specific point of time without a frequency chirp. The resonance can be maintained for a longer duration and the energy of the electrons can be enhanced if a suitable frequency chirp is introduced. The duration of interaction increases for a lower plasma density or a lower initial electron energy which causes increase in the electron energy gain. The value of magnetic field required for resonance increases with an increase in plasma density and with a decrease in initial electron energy.

With the rapid development of high power microwave (HPM) technologies, HPM devices with several output frequencies are becoming more and more attractive. Diplexer is a microwave device with two output frequencies, here, an L/X band diplexer with novel structure is tried to be employed in the HPM system. In order to obtain the same radiation direction for the L and X band microwaves in the diplexer, the reflection of L band microwaves and transmission of X band microwaves are realized by an array of irises. To obtain the required performance, the width and thickness of the irises and the distance between them should be well chosen. The diplexer is investigated through theoretical analysis and numerical computation, and the final design described in this work, is the result of an overall optimization process. In simulation, both the reflectivities of L-band microwaves and the transmissivities of X band microwaves reach 99.5%, and the power handling capacity of the diplexer is higher than 5.6 gigawatt (GW). Then, the L/X band diplexer is designed and fabricated according to the optimized results. After that, a series of experiments are carried out to test the diplexer. The cold test results show that the reflectivities of L band microwaves are as high as 97.5%, and the transmissivities of X band microwaves are up to 98.8%, and the acquired radiation patterns show that the designed diplexer is suitable for the diplexing of L/X band microwaves, in a word, the cold test results of the diplexer are in good agreement with the simulational results. In the end, the diplexer is tested with GW class HPMs. The radiated HPMs have little change in the pulse duration and magnitude with the diplexer applied, that is to say, there is no microwave breakdown during the HPM reflection and transmission.

Self-focusing effects, induced by ASTERIX pulsed laser at PALS Laboratory of Prague, have been investigated. Laser was employed at the third harmonics (438 nm) and intensities of the order of 1016 W/cm2. Pure Au was used as thin target and irradiated with 30° incidence angle. An ion energy analyzer was employed to detect the energy-to-mass ratio of emitted ions from plasma. Measurements were performed by changing the focal point position with a high spatial resolution step-motor. Results demonstrated that non linear processes, due to self-focusing effects, occurs when the laser beam is focused at about 200 µm in front of the target surface. In such conditions, a new ion group, having high charge state and kinetic energy, is produced because of the increment in temperature of the laser-generated plasma.

If plasmas are considered fully ionized, the electronic stopping of a charged particle that traverses them will only be due to free electrons. This stopping can be obtained in a first view through the random phase approximation (RPA). But free electrons interact between them affecting the stopping. These interactions can be taken into account in the dielectric formalism by means of two different ways: the Mermin function or the local field corrections (LFCs). LFCs produce an enhancement in stopping before the maximum and recover the RPA values just after it. Mermin method also produces firstly a high increase at very low energies, then a small enhancement at low energies and finally decreases below RPA values before and after the maximum. Differences between the two methods are very important at very low energies and by 30% around the stopping maximum.

The evolution of a high-density electron beam in the field of a super-intense laser pulse is considered. The one-dimensional (1D) theory for the description of interaction, taking into account the space-charge forces of the beam, is developed, and exact solutions for the equations of motion of the electrons are found. It was shown that the length of the high-density electron beam increases slowly in time after initial compression of the beam by the laser pulse as opposed to the low-density electron beam case, where the length is constant on average. Also, for the high-density electron beam, the sharp peak frozen into the density distribution can appear in addition to a microbunching, which is characteristic for a low-density electron beam in a super-intense laser field. Characteristic parameters for the evolution of the electron beam are calculated by an example of a step-like envelope of the laser pulse. Comparison with 1D particle-in-cell simulations shows adequacy of the derived theory. The considered issue is very important for a special two-pulse realization of a Thomson scattering scheme, where one high-intensity laser pulse is used for acceleration, compression and microbunching of the electron beam, and the other probe counter-streaming laser pulse is used for scattering with frequency up-shifting and amplitude enhancement.

Extensive numerical simulations have been carried out to design a viable solid graphite wheel shaped production target for the super conducting fragment separator experiments (Super-FRS) at the future Facility for Antiprotons and Ion Research (FAIR) using an intense uranium beam. In this study, generation, propagation and decay of deviatoric stress waves induced by the beam in the target, have been investigated. Maximum beam intensities that the target can tolerate using different focal spot sizes that are determined by requirements of good isotope resolution and transmission of the secondary beam through the fragment separator, have been calculated. It has been reported elsewhere that the tensile strength of graphite significantly increases with temperature. To take advantage of this effect, calculations have also been done in which the target is preheated to a higher temperature, that in practice can be achieved, for example, by irradiating the target with a defocused ion beam before the experiments are performed. We report results of a few examples using an initial temperature of 2000 K. This study has shown that employing such a configuration, one may use a solid graphite production target even for the maximum intensity of the uranium beam (5 × 1011 ion per bunch) at the Super-FRS.

The measurement of charged particles and cavitation bubble expansion velocity is reported in a laser induced breakdown in water using beam deflection set-up. Effect of laser power on charged particles, cavitation bubble velocities and higher order bubble oscillations is also studied.

Radiative properties are fundamental for plasma diagnostics and hydro-simulations. For this reason, there is a high interest in their determination and they are a current topic of investigation both in astrophysics and inertial fusion confinement research. In this work a flexible computation package for calculating radiative properties for low and high Z optically thin and thick plasmas, both under local thermodynamic equilibrium and non-local thermodynamic equilibrium conditions, named RAPCAL is presented. This code has been developed with the aim of providing accurate radiative properties for low and medium Z plasmas within the context of detailed level accounting approach and for heavy elements under the detailed configuration accounting approach. In order to show the capabilities of the code, there are presented calculations of some radiative properties for carbon, aluminum, krypton and xenon plasmas under local thermodynamic and non-local thermodynamic equilibrium conditions.

Capsules with a thin aerogel shell were prepared by the OO/W/OI emulsion process. (Phloroglucinol carboxylic acid)/formaldehyde (PF) was used as the water phase (W) solution to form the shell of the capsule. PF is a linear polymer prepared from phloroglucinol carboxylic acid. The viscosity of the PF solution can reach a high level of 9×10−5 m2/s without gelation while resorcinol/formaldehyde (RF) gelates at ~3–4×10−5 m2/s. Using the viscous PF solution, capsule with a 17 µm gel shell was fabricated. This thickness satisfies the specification of the first phase of Fast Ignition Realization Experiment (FIREX-I) at Osaka University. When PF gel was extracted to remove the organic solvent, shrinkage of 9% occurred. The final density of the PF aerogel was 145 mg/cm3. Both the shell thickness and density can satisfy the specification of FIREX-I. The pore size of the PF aerogel was less than 100 nm while that of RF was 200–500 nm. The SEM showed that PF had particle-like foam structure while RF had fibrous-like foam structure.

The temporal and spatial X-ray emission from PPG-X, an X-pinch driven by pulsed power generator, was studied by using diamond photo-conducting detectors and pinhole cameras. It was found that the X-ray pulse usually consists of two sub-nanosecond peaks with a time interval of about 0.5 ns, these two X-ray peaks are consistent with two point sources of X-ray recorded with pinhole camera. The total X-ray energy changes from shot to shot and is averaged to be 0.35 J for hν > 1.5 keV. The size of the X-ray point source is in the range from 100 µm to 5 µm, decreasing rapidly with the increase of the photon energy. The X-pinch was used as X-ray source for backlighting the electrical explosion of single wire and for phase-contrast imaging of a mosquito.

The paper is devoted to research and development of a novel experimental technique—liquid-filled laser-driven shock tube (LST) for modeling of Rayleigh-Taylor (RT) and Richtmyer-Meshkov (RM) hydrodynamic instabilities development at the contact surface of two immiscible liquids under shock wave (SW) passage. 100-J, 100-ns KrF laser facility GARPUN has been used to irradiate some opaque liquids. A homogenizing focusing system combined multi-element prism raster and a lens to provide non-uniformity less than a few percents across a square 7 × 7-mm spot, laser intensities being varied in the range of q = 0.004–2 GW/cm2. Surface plasma blow-off produced a planar SW, which propagated into the liquid. SW amplitudes as high as 0.8 GPa weakly damping with increasing thickness were measured in dibutyl-phthalate (DBP), which volumetrically absorbed ultraviolet (UV) laser light. Nonlinear absorption coefficients and laser breakdown thresholds were measured for pure water and UV optical materials intended to confine plasma. Test bench experiments were performed to produce standing acoustic waves as initial perturbations at the interface between two immiscible liquids.

In this paper, we present the results of studies on ion emission characteristics of a laser plasma produced from a copper nano-particle layer of 1–3 µm thickness coated over polished surface of a solid copper target. Laser intensity of 1013–1014 W/cm2 was produced on the targets by a 2 J Nd:glass laser having a variable pulse duration of 300–800 ps. Nano-particle size was in the range of 15–25 nm. Ion emission from the nano-particle plasma was compared with plasma generated from a polished copper target. Ion emission from the nano-structured target was observed to depend on the polarization of the incident laser beam. This effect was stronger for a shorter laser pulse. X-ray emission was measured in the soft and hard X-ray region (0.7 to 8 keV) using various X-ray filters. A nano-particle coated target is found to yield a larger flux as well as velocity of ions as compared to polished target when the laser polarization is parallel to the plane containing target normal and detector axis. However, no X-ray enhancement has been observed in the wavelength range 1.5 to 20 Å.

The current capsule target design for the first ignition experiments at the NIF Facility beginning in 2009 will be a copper-doped beryllium capsule, roughly 2 mm in diameter with 160-µm walls. The capsule will have a 75-µm layer of solid deuterium-tritium on the inside surface, and the capsule will be powered by X-rays generated from a gold/uranium cocktail hohlraum. The design specifications are extremely rigorous, particularly with respect to interfaces, which must be very smooth to inhibit Rayleigh-Taylor instability growth. This paper outlines the current design, and focuses on the challenges and advances in capsule fabrication and characterization; hohlraum fabrication, and deuterium-tritium layering and characterization.

The possibility of the creation and the application prospects of the laser-electron X-ray generator based on Thomson scattering of laser radiation on a bunch of relativistic electrons are considered. Such a generator fills the existing gap between X-ray tubes and synchrotron radiation sources, which is several orders of magnitude in terms of the brightness, average intensity, size, and also in the construction and running costs.

This paper deals with a lithium/tin combined target to increase the conversion efficiency of extreme ultraviolet (EUV) of 13.5 nm emission from laser-produced plasma. The bilayer target of glass/lithium (20 nm)/tin (50 nm) exhibits a sharp and strong emission in comparison with a Sn bulk target. The reverse coating of glass/tin/lithium was unstable and EUV could not be observed. By using nano-porous SnO2 and an electrochemical deposition of lithium, nano-structured lithium/tin composite was prepared, and was stable without deliquescence of lithium.