The combination of advances in knowledge, technology, changes in consumer preference and low cost of manufacturing is accelerating the next technology revolution in crop, livestock and fish production systems. This will have major implications for how, where and by whom food will be produced in the future. This next technology revolution could benefit the producer through substantial improvements in resource use and profitability, but also the environment through reduced externalities. The consumer will ultimately benefit through more nutritious, safe and affordable food diversity, which in turn will also contribute to the acceleration of the next technology. It will create new opportunities in achieving progress towards many of the Sustainable Development Goals, but it will require early recognition of trends and impact, public research and policy guidance to avoid negative trade-offs. Unfortunately, the quantitative predictability of future impacts will remain low and uncertain, while new chocks with unexpected consequences will continue to interrupt current and future outcomes. However, there is a continuing need for improving the predictability of shocks to future food systems especially for ex-ante assessment for policy and planning.

There are few studies about the ability of CROPGRO-Tomato model to simulate tomato growth under field conditions as a function of both local weather and soil conditions. The aim of this work was to calibrate the CROPGRO-Tomato model, included in the Decision Support System for Agrotechnology Transfer (DSSAT) software, for the Thomas F1 indeterminate tomato cultivar grown under open field conditions at two locations in the Czech Republic with different soil and climate conditions. Additionally, this paper focuses on modelling the impact of compound weather events (CEs) on the growth characteristics of the hybrid field tomato variety. The genotype file, including the main parameters of crop phenology and plant growth, was adapted to the Thomas F1 indeterminate tomato cultivar. The CROPGRO-Tomato model was calibrated by inputting the soil characteristics, weather data and crop management data and then by adjusting the genetic coefficients to simulate the observed Leaf Area Index (LAI) and Above Ground Biomass (AGB) from transplanting to harvest under the farmers' field conditions. The comparison of the LAI simulated by the model and measured under field conditions showed adequate representation with the root mean square error of 0.86 and 1.11 m2/m2. Although there was a good fit for LAI and AGB between the simulated and measured data during the first part of the growing season, increasing differences were found in the growing season with cool-wet and/or hot-dry thresholds of CEs.

Frequent freezing injury greatly influences winter wheat production; thus, effective prevention and a command of agricultural production are vital. The freezing injury monitoring method integrated with ‘3S’ (geographic information systems (GIS), global positioning system (GPS) and remote sensing (RS)) technology has an unparalleled advantage. Using HuanJing (HJ)-1A/1B satellite images of a winter wheat field in Shanxi Province, China plus a field survey, crop types and winter wheat planting area were identified through repeated visual interpretations of image information and spatial analyses conducted in GIS. Six vegetation indices were extracted from processed HJ-1A/1B satellite images to determine whether the winter wheat suffered from freezing injury and its degree of severity and recovery, using change vector analysis (CVA), the freeze injury representative vegetation index and the combination of the two methods, respectively. Accuracy of the freezing damage classification results was verified by determining the impact of freezing damage on yield and quantitative analysis. The CVA and the change of normalized difference vegetation index (ΔNDVI) monitoring results were different so a comprehensive analysis of the combination of CVA and ΔNDVI was performed. The area with serious freezing injury covered 0.9% of the total study area, followed by the area of no freezing injury (3.5%), moderate freezing injury (10.2%) and light freezing injury (85.4%). Of the moderate and serious freezing injury areas, 0.2% did not recover; 1.2% of the no freezing injury and light freezing injury areas showed optimal recovery, 15.6% of the light freezing injury and moderate freezing injury areas showed poor recovery, and the remaining areas exhibited general recovery.

Manure is a primary source of methane (CH4) emissions into the atmosphere. A large proportion of CH4 from manure is emitted during storage, but this varies with storage methods. In this research, we tested whether covering a manure heap with plastic reduces CH4 emission during a short-term composting process. A static chamber method was used to detect the CH4 emission rate and the change of the physicochemical properties of cattle manure which was stored either uncovered (treatment UNCOVERED) or covered with plastic (treatment COVERED) for 30-day periods during the four seasons? The dry matter content of the COVERED treatment was significantly less than the UNCOVERED treatment (P < 0.01), and the C/N ratio of the COVERED treatment significantly greater than the UNCOVERED treatment (P > 0.05) under high temperature. In the UNCOVERED treatment, average daily methane (CH4) emissions were in the order summer > spring > autumn > winter. CH4 emissions were positively correlated with the temperature (R2 = 0.52, P < 0.01). Compared to the UNCOVERED treatment, the daily average CH4 emission rates from COVERED treatment manure were less in the first 19 days of spring, 13 days of summer, 10 days of autumn and 30 days of winter. In summary, covering the manure pile with plastic reduces the evaporation of water during storage; and in winter, long-term covering with plastic film reduces the CH4 emissions during the storage of manure.

The objective of this project is to integrate a domestic photocatalytic desulphurization facility with a biogas upgrading module and try to develop a system for biogas desulphurization and upgrading under ambient conditions. Four photocatalytic desulphurization reactors (PDRs) and one activated carbon reactor (ACR) were applied for biogas desulphurization and filtration under ambient conditions. Moreover, a hollow fibre carbon dioxide (CO2) adsorption module was applied for biogas upgrading. The operation pressure of the PDR and ACR was under ambient pressure. Results showed that hydrogen sulphide removal efficiency of the photocatalytic desulphurizer was about 0.99–1.00 (v/v) under the inlet biogas flow less than 5 litres/min and the concentration of inlet hydrogen sulphide was lower than 5600 mg/m3. For desulphurized biogas upgrading, the removal efficiency of CO2 was higher than 0.90 (v/v) under the outlet biogas flow was 1 litre/min (i.e. inlet biogas flow was about 2 litres/min). However, the ratio of methane in the upgrading biogas was lower than 0.90 (v/v). Thus, nitrogen gas removal cartridges will be integrated with the biogas upgrading module to promote methane concentration in the upgraded biogas.

High yielding ruminant livestock require high nutritive value in forage for maintenance, growth and production. Climate change has been documented as impacting on the nutritive value of forage plants. Therefore, the aim of this study was to investigate the impact of increased temperature in combination with CO2-enhancement on the nutritive value of orchard grass (cocksfoot; Dactylis glomerata L.), as a C3 model plant, widespread in mountainous permanent grassland plant communities. Functional traits and forage quality of orchard grass were investigated both under ambient (C0T0) and under simulated, future climate conditions (C2T2) with increased temperature (+3°C) and enhanced CO2 concentration (+300 ppm) under field conditions. Plant samples were taken from each of the three growths over a period of three consecutive years and numerous functional properties and forage quality parameters were determined. Special attention was paid to the determination of water-soluble carbohydrates (WSC), crude protein (CP), non-protein N (NPN) and metabolizable energy (ME) as possible indicators for different climatic conditions. It is hypothesized that (i) functional traits and (ii) forage quality of orchard grass are altered by increased temperature and higher CO2 concentration. The results showed a negative impact of C2T2 compared to C0T0 on tiller height (54.4 v. 70.6 cm) and weight (2.42 v. 3.22 g) as average over cuts and years. The NPN content was lower in C2T2 (312 g/kg CP) compared to C0T0 (339 g/kg CP). In contrast, the WSC content was higher in C2T2 (90.3 g/kg DM) compared to C0T0 (82.5 g/kg DM). Both ME content and digestibility were increased in C2T2 (9.18 ME/kg DM and 68.2%) compared to C0T0 (8.86 ME/kg DM and 65.4%). Concluding, under increased temperature and enhanced CO2, both functional traits and certain nutrients and their fractions appear to change in orchard grass.

Participatory plant breeding (PPB), commonly applied in the Global South to address the needs of underserved farmers, refers to the active collaboration between researchers, farmers and other actors throughout the breeding process. In spite of significant public and private investments in crop variety improvement in the Global North, PPB is increasingly utilized as an approach to address cropping system needs. The current study conducted a state-of-the-art review, including a comprehensive inventory of projects and five case studies, to explore the emergence of PPB in the Global North and inform future PPB efforts. Case studies included maize (Zea mays), tomato (Solanum lycopersicum), Brassica crops (Brassica oleracea), wheat (Triticum aestivum) and potato (Solanum tuberosum). The review identified 47 projects across the United States, Canada and Europe including 22 crop species representing diverse crop biology. Improved adaptation to organic farming systems and addressing principles and values of organic agriculture emerged as consistent themes. While projects presented evidence that PPB has expanded crop diversity and farmer's access to improved varieties, obstacles to PPB also emerged including challenges in sustained funding as well as addressing regulatory barriers to the commercial distribution of PPB varieties. Agronomic improvements were only one lens motivating PPB, with many projects identifying goals of conservation of crop genetic diversity, farmers' seed sovereignty and avoidance of certain breeding techniques. The authors conclude that a multidisciplinary approach is needed to fully understand the social, political and agroecological influences driving the emergence of projects in the Global North and factors impacting success.

In the Mediterranea area, major effects of climate change are a modification in rainfall patterns, an increase in temperature with an intensify in tropical nights, and an increase in incoming radiations, especially UV-Bs. Despite the various adaptation strategies, grapevines are sensitive to altered climatic conditions. This paper aims to assess the benefits of applying a new sustainable product to the soil that can implement farmers’ resources to adapt to this changing situation. Zeowine was realized by combining the properties of zeolite, which has excellent potential in many sectors such as in agriculture, with the organic substance of a compost obtained on a company scale from the reuse of waste processing grapes, pomace and stalks. The effects of two different soil management (Z – Zeowine, 30 t/ha dose and C – Compost, 20 t/ha dose) on vine physiology and berry compositions in Sanforte grapevines (new plantation) were studied during the 2019–2020–2021 growing seasons in the San Miniato area, Italy. The following physiological parameters of grapevines were measured: leaf gas exchange, leaf temperature, stem water potential and chlorophyll fluorescence. The results showed that Z increased single leaf photosynthesis, reduced leaf temperature and water stress. In addition, phenolic and technological parameters were studied. The Z-treated vines had higher sugar content and total and extractable anthocyanin content as well as berry weight. These results suggested that the application of zeolites added to compost in the vineyard to the soil can be a valid tool to mitigate the effects of climate change.

Weeds are a major biotic constraint to the production of crops. Studies on the critical period of weed control (CPWC) consider the yield loss due to the presence of all weeds present in the crop cycle. The CPWC is the time interval between the critical timing of weed removal (CTWR) and the critical weed-free period (CWFP), and the weed presence before and after the extremes of CTWR and CWFP may not significantly reduce crop yield. The crop yield is taken into consideration and weed density or biomass of individual weeds (annual or perennial) is not so important while calculating the CPWC. Only weed density or biomass is considered for calculating weed control efficiency of a particular management practice for which the weed seed bank is also a criterion. However, weed biomass is the outcome after competition experienced by each weed species with the fellow crop and the weeds. Consequently, the weed pressure in the subsequent season will be the cumulative effect of the preceding season too, which is unaccounted for in CPWC. It is argued that in organic farming or low-input farming systems, where herbicides are not used, the concept of CPWC can be misleading and should be avoided. It is concluded that CTWR is more meaningful than the CPWC.

The objective was to evaluate the fermentation profile, in vitro gas production and nutritional quality of pornunça (Manihot spp.) silages containing levels of condensed tannin (CT; 0, 4, 8 and 12% on dry matter (DM) basis), at five opening times (0, 3, 7, 14, 28 and 56 days). A completely randomized design in a 4 × 5 factorial arrangement was adopted, with four replications, totalling 80 experimental silos. The pH and NH3-N analyses were performed at all opening times of the silos. The other analyses were performed only with silages opened at 56 days of storage. There was an interaction effect between CT levels and silo opening times for pH and NH3-N. Tannin levels in pornunça silages after 56 days ensiling increased the pH and DM and reduced crude protein (CP) and neutral detergent fibre (NDF). There was a quadratic effect for NH3-N, acetic acid, butyric acid, gas losses, dry matter recovery (DMR), hemicellulose and acid detergent fibre. Inclusion of 4 and 8% CT in pornunça silage promotes a rapid decline in pH, being within the acceptable limit for adequate fermentation at 3 days of ensiling. Silages with 4% CT establish the pH at 28 days of opening the silos, with reduced NH3-N. Silages with 4% CT present higher concentrations of acetic and butyric acids and greater DMR. Inclusion of CT in pornunça silage after 56 days ensiling increases DM and reduces CP and NDF, directly affecting the in vitro degradability and reducing gas production.

Accurate estimation of tuber size distribution (TSD) parameters in discretely categorized potato (Solanum tuberosum L) yield samples is desirable for estimating modal tuber sizes, which is fundamental to yield prediction. In the current work, systematic yield digs were conducted on five commercial fields (N = 119) to compare the Weibull, Gamma and Gaussian distribution functions for relative-likelihood-based goodness-of-fit to the observed discrete distributions. Parameters were estimated using maximum likelihood estimation (MLE) for the three distributions but were also derived using the percentiles approach for the Weibull distribution to compare accuracy against the MLE approaches. The relationship between TSD and soil nutrient variability was examined using the best-fitting model's parameters. The percentiles approach had lower overall relative likelihood than the MLE approaches across five locations, but had consistently lower Root Mean Square Error in the marketable tuber size range. Negative relationships were observed between the percentile-based shape parameter and the concentrations of Phosphorus and Nitrogen, with significant (non-zero-overlapping 95% confidence interval) regression coefficients for P (−0.74 ± 0.33 for distribution of proportional tuber numbers and −1.3 ± 0.62 for tuber weights). Stem density was negatively associated with the scale and mode of tuber number (regression coefficients −0.98 ± 0.63 and −1.08 ± 0.78 respectively) and tuber weight (regression coefficients −0.99 ± 0.78 and −1.04 ± 0.69 respectively) distributions. Phosphorus is negatively related to the scale of the tuber-number-based distribution while positively associating with the tuber weight distribution. The results suggest that excess P application was associated with the increase in small tubers that did not contribute significant weight to the final yield.

High temperature negatively affects cotton production worldwide. In Pakistan, cotton crop faces high temperature at peak flowering during June–July, which is a major reason for yield losses. The present study was conducted to find some agro-physiological markers for high-temperature tolerance. Fifty cotton genotypes were raised under normal sown (high-temperature stress) and late sown (optimum temperature) conditions for 2 years. Data were recorded for relative cell injury percentage (RCI), chlorophyll content (CC), canopy temperature (CT), boll retention percentage (BR), bolls per plant (BP), boll weight (BW), hundred seed weight (HSW), sympodial branches per plant (SBP), plant height (PH) and seed cotton yield (SCY). A large amount of variability was found among cotton genotypes as proved by descriptive statistics. Stable genotypes were selected based on higher SCY and yield components (BP, BW, HSW, SBP, PH and SCY) performance along with less RCI%, high CC and low CT. The results of heatmap analysis showed that the six cotton genotypes viz., FH-Noor, FH-Lalazar, FH-458, FH-466, NIAB-545 and NIAB-878 performed better under high-temperature stress. These selected genotypes can be a source for breeding high-temperature tolerance. Furthermore, the results from correlation analysis confirmed that the traits such as RCI%, CC and CT can be considered as early selection criteria due to their positive association with SCY. Whilst some other parameters such as BP, BW, BR, SBP and PH might be used as direct selection indices for SCY under high-temperature stress.

One thrust in increasing food security in Jamaica is expansion of cassava production. The multiple shoot removal technique (MSRT) for rapid propagation of cassava can help address limitations in planting material. Shoots sprouting from cuttings of hardwood stem are severed in such a way as to induce further sprouting, and then put to root for subsequent transfer to the field. The effects of age and fertilization of parent plants and nodal age of stems were studied. Six Colombian varieties were planted in fertilized and unfertilized field plots with similar growing conditions to provide stems for MSRT propagation. Volume of two-node cuttings increased from apical to basal nodal age, but cutting density was a better predictor of shoot production. On average, three to six viable shoots were produced per cutting over 3 months in a greenhouse. All nodal ages of stems from parent plants aged 6, 7 and 9 months were suitable if the quality of the planting stakes producing parent plants was adequate. If stake quality is uncertain, it is recommended that apical pieces are not used from parents younger than 9 months. The variety CM 6119-5 consistently produced most shoots, suggesting a strong genotypic effect, but other varieties, particularly CM 849, were less consistent, indicating the role of environmental interactions. The physiological status of cuttings as influenced by stem maturity, parent plant age, nutrition and growing conditions of both grandparent and parent stems was as important as genotypic characteristics in determining shoot production from two-node cuttings of cassava stem.

Tossa (Corchorus olitorius L.) is a significant cash crop, cultivated commercially in the lower flood plain of Bangladesh. The climatic regimes in Bangladesh are changing as well as the world does. However, this species is threatened by climate change. Occurrences of data on threatened and endangered species are frequently sparse which makes it difficult to analyse the species suitable habitat distribution using various modelling approaches. The current paper used maximum entropy (Maxent) and educational global climate model (EdGCM) modelling to predict and conserve the suitable habitat distributions for Tossa species in Bangladesh to the year 2100. Nine environmental variables, 239 occurrence data and two Representative Concentration Pathway scenarios (RCP4.5 and RCP8.5) were used for the Maxent modelling to project the impact of climate change on the Tossa distributions. Furthermore, the EdGCM was used to study the climatic space suitability for the Tossa species in the context of Bangladesh. Both of the climatic scenarios were used for the prediction to the year 2100. The Maxent model performed better than random for the Tossa species with a high AUC value of 0.86. Under the RCP scenarios, the Maxent model predicted habitat reduction for RCP4.5 is 2%, RCP8.5 is 9% and EdGCM is 10.2% from the current localities. The predictive modelling approach presented here is promising and can be applied to other important species for conservation planning, monitoring and management, especially those under the threat of extinction due to climate change.

Soybean yield within the Southern Africa falls below its potential despite similar climatic conditions across some agroecologies, replicable agronomic management practices and introduced improved varieties. Understanding physiological processes and water-use efficiency (WUE) of soybean offer information on bridging this yield gap. A field study was conducted in 2017 and 2018 seasons in two agroecologies (Angonia and Ruace) in Mozambique to evaluate the effects of Bradyrhizobium diazoefficiens strain USDA110 formerly known as Bradyrhizobium japonicum inoculant, nitrogen and phosphorus on nodulation, physiology and yield of non-promiscuous (Safari) and promiscuous (TGx 1740-2F) soybean varieties. Data on transpiration, photosynthesis, leaf area index, radiation interception and WUE from the beginning of flowering to maturity were collected. Transpiration rate varied considerably with interaction between locations, growth stages, varieties and treatments. At podding, phosphorus-treated soybean at Angonia transpired less (6.3 mmol/m2/s) than check plants (6.6 mmol/m2/s). Photosynthesis rate and WUE were distinct with variety, growth stages and inputs within agroecologies. For instance, in Angonia 2018 season, phosphorus fertilized TGx 1740-2F photosynthesized more at flowering (25.3 μmol/m2/s) while the lowest was phosphorus-treated Safari at podding with 17.2 μmol/m2/s. At the same site in 2017, inoculated soybean photosynthesized more at 22.8 μmol/m2/s leading to better WUE of 3.6 that corresponded to 2894 kg/ha yield. Overall, soybean WUE was higher when inoculated than N-treated, while P application yielded better. Results from this study will complement breeders’ effort in developing phosphorus efficient varieties suited for a wide range of changing climatical conditions.

The goals of this study are to analyse the impacts of 1.5 and 2.0°C scenarios on UK winter wheat using a combination of Global Climate Models (GCMs), crop models, planting dates and cultivars; to evaluate the impact of increased air temperature on winter wheat phenology and potential yield; to quantify the underlying uncertainties due to the multiple sources of variability introduced by climate scenarios, crop models and agronomic management. The data used to calibrate and evaluate three crop models were obtained from a field experiment with two irrigation amounts and two wheat cultivars that have different phenology and growth habit. After calibration, the model was applied to fifty locations across the wheat-growing area of the UK to cover all the main growing regions, with most points located in the main growing areas. Four GCMs, with two cultivars and five planting dates, were simulated at the end of the century. Results of this study showed that the UK potential wheat yield will increase by 2–8% under projected climate. Farmers will need to close such a gap in the future because it will have implications in terms of food security. Future climatic conditions might increase such a gap. Adaptation measures (e.g. moving the optimal planting time), along with climate-ready varieties bred for future conditions and with precision agriculture techniques can help to reduce this gap and ensure that the future actual UK wheat production will be close to the potential.

The aim of this work was to verify the possibility of intercropping rice with green manures, as well as the impact of the dry biomass yield of these intercropping systems on common bean in succession, evaluating the agronomic and qualitative performance of grains from both crops. The experiment was conducted in Southeastern Brazil in the years 2018 and 2019, with succession of rice (spring/summer) and common bean (autumn/winter). The treatments were composed of cropping systems with rice as a sole crop and intercropped with forage peanut, calopo, Crotalaria breviflora, Crotalaria spectabilis, stylo, jack bean and dwarf pigeon pea. No intercropping increased the system's yield compared to sole-crop rice, but intercropping of rice with forage peanut and stylo promoted grain yield and quality similar to those of sole-crop rice. Intercropping with C. breviflora affected the agronomic and qualitative performance of rice. Common bean yield after rice intercropped with dwarf pigeon pea, C. spectabilis and C. breviflora was similar in yield after sole-crop rice, while the other intercrops reduced common bean yield. Common bean grain quality was not affected by the cultivation of rice as sole crop and intercropped with green manures. Although none of the intercropping systems increased yield compared to sole-crop rice (control), it can be concluded that the intercropping of upland rice is viable depending on the green manure species, allowing greater biomass production per area that can help long-term soil conservation and increase the system's yield.

Agricultural waste contributes significantly to greenhouse gas (GHG) emissions if not adequately recycled and sustainably managed. A recurring agricultural waste is livestock waste that has consistently served as feedstock for biogas systems. The objective of this study was to assess the use of animal waste digestate to mitigate GHG emissions in agricultural fields. Wheat (Triticum spp. L.) was fertilized with different types of animal waste digestate (organic fertilizers) and synthetic nitrogen fertilizer (inorganic fertilizer). The 170 kg N/ha presented in digestates were split fertilized at an application rate of 90 and 80 kg N/ha. Emissions of GHGs (carbon dioxide (CO2), methane (CH4) and nitrous oxide (N2O)) were monitored directly by a static chamber system. The soil and environmental variables were measured to determine their influence on GHG emissions. Emission peaks in N2O and CO2 after the first application of fertilizers with the emissions flattening out over the cultivating season while CH4 emission was negligible with no apparent patterns observed. Results showed individual and cumulative emissions of CO2, CH4 and N2O from the digestates were relatively low and digestate fertilization could be an efficient method for reducing GHGs from agricultural sources in temperate climate conditions.

Among integrated crop–livestock systems, forage succession is an advantageous strategy for the use of pasture to feed cattle in periods of low rainfall, as well as for the generation of biomass for the no-till system for the next crop. Different species have different abilities to accumulate nutrients in their biomass, which are then released into the soil through the decomposition of crop residues. This study aimed to evaluate soybean yield in an integrated crop–livestock system in comparison to soybean–maize succession system through the production, decomposition and nutrient accumulation in the biomass. The experiment had a randomized block design with four replicates. The treatments were three cropping systems: integrated crop–livestock with Paiaguas palisadegrass (Brachiaria brizantha cv. BRS Paiaguas), integrated crop–livestock with Tamani guinea grass (Panicum maximum cv. BRS Tamani) and maize grown in succession to soybean. The results showed that the use of the integrated crop–livestock system in the form of forage succession provided greater soil cover and nutrient cycling as a result of the better utilization of the animal's excreta, than the cropping of maize in succession and resulted in higher soybean productivity, thus contributing to agricultural sustainability. Paiaguas palisadegrass and Tamani guinea grass showed a C:N ratio greater than 30:1, indicating slow decomposition of plant residues. The forages accumulated amounts of nutrients in their biomass that met the soybean demand, resulting in higher grain yield.