So much has been written about Frederick W. Lanchester over the years, it is hard to imagine finding something new to discuss about his efforts in aerodynamics. Many of the previous Lanchester Memorial Lectures discussed topics such as wing aerodynamics, aircraft concepts and design, unsteady rotor aerodynamics, aerodynamics research and a wide variety of other related aerodynamic topics. However, there has never been a lecture about Lanchester’s book Aerodynamics as a tool for aerodynamics education in the early 20th century. The lecture will discuss his book relative to other aerodynamics books before and after 1907, and uncover how Lanchester’s book had a very distinct, and important, contribution to make for aerodynamic education.

In recent times, there has been increased focus on the utilisation of virtual reality flight simulators in flight training, driven by their advantages compared to conventional methods. However, a paucity of empirical evidence has prevented their widespread introduction and regulatory approval. Existing research focuses on single-user simulators, leaving a gap in studies of collaborative training within virtual environments. Consequently, this paper investigates evidence-based simulator training within a collaborative virtual environment.

A mixed methods approach was adopted, where behaviours related to industry-standard competencies were observed in a virtual reality complex aircraft and thematic analysis applied to a post-experiment participant debrief. The findings showcase the feasibility of utilising a collaborative virtual environment for evidence-based training purposes in scenarios aligned to typical initial First Officer airline training programmes, which is a precursor to supplementing traditional professional pilot training techniques. In addition, the study found that the visual barriers imposed by head-mounted displays were overcome through the adoption of refined communication strategies, thus laying the groundwork for physically separated multi-crew pilot training.

Reynolds-Averaged Navier–Stokes (RANS) simulations, both steady and unsteady, are used to investigate supersonic, chemically reacting, flow fields inside a strut-stabilised supersonic combustion ramjet (scramjet) engine operating under different fuel flow rates. Fully supersonic, fully subsonic and mixed modes of operations inside the combustor, obtained at different fuel flow rates, are studied numerically through shock wave visualisations and top-wall static-pressure probing. The effect of changing fuel flow rates, imposed both suddenly and gradually, on the behaviour of shock waves and wall pressure profiles are studied in detail. For certain modes of combustion characterised by the presence of oblique shocks at the strut, shockwaves in the combustor respond predictably to an increase or decrease in fuel flow rate attaining the steady state flow fields as predicted by RANS simulations for those fuel flow rates. For certain other modes of combustion, characterised by the presence of shockwaves in the isolator and the absence of oblique shocks at the leading edge of the strut, shockwaves in the flow field appear unstable to fuel flow rate modulations. For such cases, any change in fuel flow rates, sudden or gradual, increase or decrease, causes the isolator shocks to immediately move upstream and eventually out of the isolator. A plausible physics-based explanation of the observed phenomena is presented.

With the rapid increase in the use of drones in various applications, including commercial and governmental, and the increasing probability of communication failures and contingencies, research becomes critical to ensure the safety and efficiency of their operations. The aim of this research is to develop adaptive drone flight control algorithms capable of operating effectively under conditions of limited communication and incomplete information to ensure reliable and safe autonomous operation of these systems. The applied methods include computer modelling and simulation, analytical, statistical, functional, deductive and descriptive methods. The study found that the use of performance evaluation methods for complex systems enables the identification of safety and performance criteria for drones, and drone flight control provides basic principles and methods that can be adapted for drones, including autopiloting and navigation. In addition, analyses of satellite communication and navigation prove the need to consider the limitations of this technology when developing drone control algorithms. The combination of these techniques allows for more robust and adaptive drone control systems that can function effectively in complex environments such as communication limitations and incomplete information. Additionally, it was found that the integration of adaptive control algorithms based on these methods allows drones to effectively adapt to variable environmental conditions and make decisions quickly even when communication is lost or information is limited.

Effusion cooling is the state-of-the-art cooling technology for gas turbine hot-gas path components. Typically, effusion cooling holes across the entire combustor liner are aligned with the combustor axis, rendering a nominal zero compound angle between highly directional miniature effusion cooling jets and the main flow direction. The pitch of effusion cooling holes is optimised accordingly. However, the swirling main flow results in a non-zero compound angle and an effectively different pitch from the design. The directional effect of effusion cooling as a result of swirling main flow on the adiabatic film cooling effectiveness (AFE) is a combined effect of a non-zero compound angle and a varied pitch. The current experimental study aims to investigate the isolated effects of compound angle on AFE by excluding the influences of varying pitch. With an improved understanding of the sole effects of non-zero compound angles on AFE, the roles that a varied pitch plays in modifying AFE are further discussed to guide future effusion cooling designs under swirling main flow conditions. Binary pressure sensitive paint (PSP) was used to determine AFE experimentally.

To investigate the flame acceleration to detonation in 2.0 and 0.5 mm planar glass combustion chambers, the experiments have been conducted utilising ethylene/oxygen mixtures at atmospheric pressure and temperature. The high-speed camera has been used to record the revolution of flame front and pressure inside the combustion chamber. Different equivalence ratios and ignition locations have been considered in the experiments. The results show that the detonation pressure in the 2 mm thick chamber is nearly three times of Chapman-Jouguet pressure, while detonation pressure in the 0.5 mm thick chamber is only 45.7% of the Chapman-Jouguet value at the stoichiometric mixture. This phenomenon is attributed to the larger pressure loss in the thinner chamber during the detonation propagation. As the value of equivalence ratio is 2.2, the detonation cannot be produced in the 2 mm thick chamber, while the detonation can be generated successfully in the 0.5 mm thick chamber. This phenomenon indicates that the deflagration is easily to be accelerated and transformed into the detonation, due to a larger wall friction and reflection. Besides, the micro-obstacle has been added into the combustor can shorten the detonation transition time and reduces the distance of the detonation transition.

In this paper, a brand-new adaptive fault-tolerant non-affine integrated guidance and control method based on reinforcement learning is proposed for a class of skid-to-turn (STT) missile. Firstly, considering the non-affine characteristics of the missile, a new non-affine integrated guidance and control (NAIGC) design model is constructed. For the NAIGC system, an adaptive expansion integral system is introduced to address the issue of challenging control brought on by the non-affine form of the control signal. Subsequently, the hyperbolic tangent function and adaptive boundary estimation are utilised to lessen the jitter due to disturbances in the control system and the deviation caused by actuator failures while taking into account the uncertainty in the NAIGC system. Importantly, actor-critic is introduced into the control framework, where the actor network aims to deal with the multiple uncertainties of the subsystem and generate the control input based on the critic results. Eventually, not only is the stability of the NAIGC closed-loop system demonstrated using Lyapunov theory, but also the validity and superiority of the method are verified by numerical simulations.

Damage initiation hotspots around features, such as bolts and ply drops, must be investigated during the preliminary design phase of large composite structures, such as composite airframes. A global-local modelling approach is commonly employed to perform this investigation, whereby a global low-fidelity model is used to drive high-fidelity local models around the features of interest. However, this methodology is slow, repetitive and expert-dependent. In this investigation, we address these issues by applying machine learning techniques to this global-local modelling framework and demonstrate the time-saving benefit when predicting damage initiation of bolted composite joints. Feature engineering of model inputs and outputs, and appropriate customisation of machine learning methods enables damage initiation prediction. Special consideration is given to the boundary conditions that must be varied to simulate the response of the bolted composite joints. Results show over three orders of magnitude time-saving benefit and satisfactory accuracy of the proposed methodology. This indicates its potential to be developed further into a rapid design and optimisation tool.

The rising demand for air traffic will inevitably result in a surge in both the number and complexity of flight conflicts, necessitating intelligent strategies for conflict resolution. This study addresses the critical challenges of scalability and real-time performance in multi-aircraft flight conflict resolution by proposing a comprehensive method that integrates a priority ranking mechanism with a conflict resolution model based on the Markov decision process (MDP). Within this framework, the proximity between aircraft in a multi-aircraft conflict set is dynamically assessed to establish a conflict resolution ranking mechanism. The problem of multi-aircraft conflict resolution is formalised through the MDP, encompassing the design of state space, discrete action space and reward function, with the transition function implemented via simulation prediction using model-free methods. To address the positional uncertainty of aircraft in real-time scenarios, the conflict detection mechanism introduces the aircraft’s positional error. A deep reinforcement learning (DRL) environment is constructed incorporating actual airspace structures and traffic densities, leveraging the Actor Critic using Kronecker-factored Trust Region (ACKTR) algorithm to determine resolution actions. The experimental results indicate that with 20–30 aircraft in the airspace, the success rate can reach 94% for the training set and 85% for the test set. Furthermore, this study analyses the impact of varying aircraft numbers on the success rate within a specific airspace scenario. The outcomes of this research provide valuable insights for the automation of flight conflict resolution.

Aircraft play a major role in meeting the fast and efficient transportation needs of modern society, thanks to their advanced features. However, gas turbine engines used in aircraft have many negative effects on human health. One of the negative effects is the exhaust gases released by these engines to nature. In this study, it is discussed to present alternative models based on heuristic methods to reduce the emission values of the synthetic fuel mixture used in the combustion chamber of gas turbine engines. For this purpose, a model based on artificial neural networks (ANN) based on the back-tracking search optimisation (BSO) algorithm is proposed by using experimentally obtained emission values found in the literature. In the proposed model, the parameters of the optimum ANN structure are first determined by the BSO algorithm. Then, by using the optimum ANN structure, the most appropriate input values were found with the BSO algorithm, and the emission values were reduced. The simulation results have shown that the proposed method will be a fast and safe alternative method for reducing emission values.

Contrails are a major contributor to the climate effect of aviation. Mitigation efforts and technological improvements aim to reduce the contrail climate effect. Many currently discussed innovations (like using sustainable aviation fuels (SAFs) or hydrogen) affect the physical processes and phenomena during contrail formation. Hence, understanding and analysing contrail formation is of great importance in the context of climate research. Ice crystal formation in a nascent contrail is completed within the first seconds after the engine exhaust is emitted. In the past, numerical models treating this early stage typically involved either a 3D or 0D approach. Whereas 3D models are computationally expensive, restricting the number of simulations that could be performed, less expensive 0D models allow to explore a larger parameter space but neglect plume heterogeneity and use a prescribed plume dilution. We present the new dynamical framework RadMod for contrail formation simulations that describes the evolution of a turbulent round jet emitted from an aircraft engine. Relative to large-eddy simulation (LES) or Reynolds-averaged Navier-Stokes (RANS) 3D models of contrail formation, our model is computationally less expensive, enabling extensive parameter studies. The model accounts for the mixing of the hot and moist exhaust air with the cold ambient air through the solution of the two-dimensional advection-diffusion equation of momentum, temperature, and water vapour. The validation of our model is conducted through comparisons with empirical relationships and CFD results. In the near future, this model will be combined with an existing microphysical model, resulting in a contrail formation model of intermediate complexity.

The variable stator vanes (VSV) are a set of typical spatial linkage mechanisms widely used in the variable cycle engine compressor. Various factors influence the angle adjustment precision of the VSV, leading to the failure of the mechanism. The reliability analysis of VSV is a complex task due to the involvement of multiple components, high dimensionality input and computational inefficiency. Considering the hierarchical characteristics of VSV structure, we propose a novel multi-layer Kriging surrogate (MLKG) for the reliability analysis of VSV. The MLKG combines multiple Kriging surrogate models arranged in a hierarchical structure. By breaking the problem down into more minor problems, MLKG works by presenting each small problem as a Kriging model and reducing the input dimension of the sub-layer Kriging model. In this way, the MLKG can capture the complex interactions between the inputs and outputs of the problem while maintaining a high degree of accuracy and efficiency. This study proves the error propagation process of MLKG. To evaluate MLKG’s accuracy, we test it on two typical high-dimensional non-linearity functions (Rosenbrock and Michalewicz function). We compared MLKG with some contemporary KG surrogate modeling techniques using mean squared error (MSE) and R square (${R^2}$). Results show that MLKG achieves an excellent level of accuracy for reliability analysis in high-dimensional problems with a small number of sample points.

This paper aims to explore the feasibility of providing boundary layer propulsion and flow control by means of embedded aerofoils that are oscillating in the pure plunge mode. To this end, Navier-Stokes calculations of the low-speed flow over a flat plate with an oscillating small foil in close vicinity to the plate were performed to determine the influence of the wall distance, Reynolds number, and reduced frequency on the aerofoil thrust. The simulations were extensively validated against water tunnel experiments at Reynolds numbers between 440 to 5,940. Good agreement was obtained in terms of mean streamwise velocity profiles and the vortical wake patterns. Results indicate that the thrust increases from its value in unbounded flow with decreasing distance from the plate. The propulsive efficiency exhibits a consistent peak at a non-dimensional plunge velocity of about 0.55. For wall distances between one-half to one chord lengths, vortex pairs are shed in a slightly upward deflected direction independent of the starting motion of the aerofoil. As the wall distance increases further, these vortex pairs change into the well-known reverse Karman vortex street. Example calculations for a flat plate with two foils mounted close to the plate trailing edge and oscillating in counterphase confirm the device’s efficacy.

The world is currently undergoing a technological transformation with numerous innovative concepts emerging. This shift is driven by remarkable advancements in artificial intelligence and the urgent need for decarbonisation. With this comes a growing demand for skilled engineers who can actively contribute at any stage within the life cycle of a product. This can be the generation of new concepts at low Technology Readiness Levels or contributing actively to their development and operational safety. This paper explores the integration of a 1-day practical activity to reinforce theoretical concepts learned within a classroom-based environment. Small groups of students were given the opportunity of engaging with a small helicopter engine (Rolls-Royce Gnome engine) through the disassembly and reassembly of the exhaust and power turbine section while following the manufacturer’s manual and ensuring industrial norms for safe practice. This hands-on activity included an introduction to tooling, a Gnome familiarisation activity, and an introduction to inspection techniques. Based on the feedback recorded, the students experienced a notable improvement in their basic understanding by effectively reinforcing knowledge acquired within the classroom through active engagement with an actual gas turbine engine.

A simplified configuration was developed to facilitate the mode transition process within an over-under Turbine-Based Combined Cycle (TBCC) inlet. Leveraging dynamic mesh technology, an unsteady numerical simulation of the mode transition was conducted, emphasising the flow characteristics of the mode transition and the impact of key similarity criteria numbers. The findings indicate that at an incoming Mach number of 2.0, the mode transition is paired with a continuous alteration in the capture mass flow of the high-speed duct. This continual change instigates the inlet unstarting, with subsequent flow characteristics being contingent on the historical effect, exhibiting a degree of hysteresis characteristics. When the scale effect is considered, it is observed that a larger model scale results in higher Reynolds (Re) and Strouhal (St) numbers. This directly contributes to a notable delay in the unstart moment, a decrease in the unstart interval, and an enlargement of the hysteresis loop. An examination of control variables reveals that the Re number marginally influences mode transition characteristics, while the St number’s effect constitutes approximately 90% of the scale effect. This conclusively demonstrates that the St number is the predominant similarity criterion number in the mode transition process.

Interlaminar delamination damage is a common and typical defect in the context of structural damage in carbon fiber-reinforced resin matrix composites. The technology to identify such damage is crucial for improving the safety and reliability of structures. In this paper, we fabricated carbon fiber-reinforced composite laminates with different degrees of delamination damage, conducted static load experiments on them and used femtosecond fiber Bragg grating sensors (fsFBG) to determine their structural state to investigate the effects of delamination damage on their performance. We constructed a model to identify damage based on the deep residual shrinkage network, and used experimental data to enable it to identify varying degrees of delamination damage to carbon fiber-reinforced composites with an accuracy of 97.98%.

This paper presents the concept of a lifting-wing quadcopter unmanned aerial vehicle (UAV), a vertical take-off and landing vehicle (VTOL) with a rear wing, a canard at its front and four propellers. The aerodynamic surfaces are designed so that their mounting angle can be adjusted and fixed before flight, so its performance in transition flight can be studied for a combination of wing and canard mounting angles. A dynamic model using rigid-body equations of motion is presented, which is used to compute the transition flight trajectory from hover to cruise in horizontal flight. The trim conditions were computed for a range of fixed wing and canard mounting angles to study the effects of these variables on transition trajectory parameters such as required power, body pitch angle and propeller rotation speeds as a function of flight speed. Furthermore, a transition flight control algorithm is presented, which has a cascaded PID controller and a reference scheduler to switch between the proper reference states, controls and control allocation matrix. Finally, the transition control algorithm of the conceptual UAV is numerically simulated. Results show that this configuration can perform a fast and smooth transition from hover to cruise flight using the proposed flight control algorithm, substantially reducing required propulsive power in cruise of up to 64%. The application of the control algorithm made notable a transition manoeuver that consists of negatively inclining the aircraft at a negative pitch angle, initially at high intensity, and as the final cruising speed approaches, the inclination is attenuated until the equilibrium pitch angle is reached. Simultaneously with the negative inclination of the pitch angle, there is a slight drop in altitude, which is quickly resumed as the trajectory develops until the final cruising speed. Lastly, this aircraft configuration can be widely used in applications where performance gains in operations currently carried out by multicopters, which cover large distances and need long flight time, would bring great operational advantages.

This study presents a model that aims to optimise the sequencing arrival aircraft around the terminal manoeuvring area (TMA). The model considers the transit passenger counts of these aircraft and employs the point merge at Sabiha Gokcen Airport. In this study, aircraft were categorised into two groups, namely ‘High or Low Transit Passenger (HTP/LTP)’. Subsequently, multi-objective models were employed to solve the test problems. Weighted sum scalarisation (WSS), conic scalarization (CS), and epsilon constraint (EC) models were utilised to increase robustness and their results were compared with a single-objective optimisation model. This approach aims to provide decision-makers with a variety of outcomes, thus expanding their options. Simultaneously, efforts are made within the model to allow aircraft with HTP counts to have minimal delays. Additionally, emission calculations were conducted to offer a critical perspective on the environmental implications, and the delay results of the multi-objective optimisation (MOO) models underwent statistical analysis.

The main purpose of this article is to present the nonlinear unsteady behaviour for jet transport aircraft response to serious atmosphere turbulence in cruise flight and to provide the appropriate mitigation concepts for pilots in the pilot training course of the IATA – Loss of Control In-flight (LOC-I) program. The flight data of a twin-jet and a four-jet transport aircraft encountered serious atmosphere turbulence are the study cases for this article. This study uses flight data mining and fuzzy-logic modeling of artificial intelligence techniques to establish nonlinear unsteady aerodynamic models. Since the rapid change of aerodynamic characteristics in turbulence, so the study uses decoupled longitudinal and lateral-directional motion to identify various eigenvalue motion modes of nonlinear unsteady behaviour through digital 6-DOF flight simulation. It is found that the changes of the main flight variables in the aerodynamic scene and flight environment of the two aircraft are different, but the profiles of five eigenvalue motion modes are actually similar. Those similar eigenvalue motion modes can formulate preventive actions related to the flight handling quality for safe and efficient control by pilots to execute the flight tasks. The one with a large drop height during the ups and downs motion between the two is chosen to construct the movement mechanism of nonlinear unsteady behaviours. The assessments of dynamic stability characteristics of nonlinear unsteady behaviour based on the approaches of oscillatory motion and eigenvalue motion modes related to loss of control will be demonstrated in this article. To develop preventive actions, the situation awareness response to the induced mutation of nonlinear unsteady behaviour on the pilot’s operations will be a further research task in the future.

With the rapid expansion of the aviation industry, an increasing number of Close Spaced Parallel Runway (CSPR) airports are either planning or constructing End Around Taxiways (EAT) to alleviate field operation pressures and enhance safety. Taking Shanghai Hongqiao Airport’s typical CSPR EAT configuration as a case study, this research integrates the airport’s current operational status with the anticipated requirements for future structural renovations and increased flight volumes. Various operational scenarios are established, and simulation research on optimising EAT operations is conducted in advance. The simulation study proceeds as follows: first, an AirTOP simulation model is constructed based on Hongqiao Airport’s actual operational construction. Subsequently, leveraging existing operational scenarios, five simulation scenarios are devised by activating EATs at the departure and approach ends of the eastern zone. The merits and drawbacks of these scenarios are thoroughly analysed. The findings indicate that, with escalating flight volumes, the utilisation of EAT for larger aircraft can curtail their holding duration by nearly 8 min, consequently reducing overall arrival holding duration by 6 min. Departures from gates proximate to T1 experience a 3-min reduction in holding duration through the adoption of EAT at the approach end. Despite an increase in taxi distance due to a higher proportion of aircraft taxiing around, the overall taxi time is diminished. Activating EATs at the departure and approach ends of the eastern zone effectively mitigates the adverse effects of heightened flight volumes on field operational efficiency.