An overview of findings from an in-depth inductive study of ‘the lexical, exegetical, conceptual, and theological study of evil from the Hebrew text of Genesis’ provides key insights into the broad use of the primary lexeme(s) for evil (ra as an adjective, raa as a verb, and raah as a noun). The use of evil is followed sequentially through each occurrence in Genesis to assess its meaning and concept contextually. The plot conflict of good and evil is observed from the beginning to its bookend. Evil is never called good nor found to be the absence of good, but rather, the corruption of creational and covenantal goodness. God is found to work in and through flawed and dysfunctional humans to overturn evil and accomplish his good creational and covenantal purposes.

Mössbauer spectra of 9 glauconite samples from Upper Cretaceous and Lower Tertiary strata in the South Island of New Zealand contain a broad shoulder due to low intensity absorption continuous between 1.0 and 2.5 mm/sec when the absorber is at room temperature; the shoulder is absent, and sharp peaks are apparent in spectra taken with the absorber at 80°K. The data suggest that electron transfer occurs between adjacent Fe3+ and Fe2+ ions at room temperature. The low temperature spectra indicate that all Fe in the glauconites is in octahedral coordination. Fe3+ and Fe2+ ions occur in both eis and trans sites; Fe3+ shows a strong preference for eis sites whereas Fe2+ shows an even stronger preference for trans sites.

The partially variable oxidation state of Fe in glauconite is interpreted in terms of a geochemical model for glauconitization of a degraded or incomplete progenitor phyllosilicate. The model involves exchange of Fe2+ for other cations which temporarily stabilize the progenitor, followed by Fe2+-Fe3+ charge transfer reactions. Each reaction results from the system's tendency towards equilibrium. The model is supported by the observation that artificially leached glauconite increases both its Fe3+ and its Fe2+ content when placed in a solution containing Fe2+ as the only Fe ion present.

Sedimentologic zones that are differentiated by changes in lithology, mineralogy, chemical composition, and crystal morphology observable in scanning electron micrographs occur in Missouri high-alumina clay deposits. These properties and changes suggest that the high-alumina materials originated from Pennsylvanian-age, paludal sediments deposited in depressions underlying Paleozoic carbonate rocks. Alumina was relatively enriched in zones of the deposits by leaching of silica and of alkali and alkaline earth metals from the sediments. The most intense leaching occurred on the highest parts of the Ozark Dome.

Diaspore is the predominant high-alumina mineral. Boehmite, although far less abundant than diapsore, may have paragenetically preceded diaspore in some deposits. Chlorite, presumably an Al-rich variety because the content of MgO is typically <0.5%, is also present. Li, which is sporadically present, is inferred to have accumulated in the chlorite which may be a proto-variety of cookeite. Because Li+ and Al3+ are similar in size, Li is inferred to have accompanied Al as a resistate element in contrast to K and Na which were leached from parent phyllosilicates.

Regularly interstratified chlorite/smectite (corrensite) occurs as grain coatings in marine and eolian sandstones of the Permian Cutler Formation in Lisbon Valley, Utah. Corrensite dominates the <2-μm clay size fraction along with lesser amounts of regularly interstratified illite/smectite in bleached, permeable sandstones that are interbedded with smectite-dominated arkosic, red, laterally discontinuous fluvial sandstones. Chemical and X-ray powder diffraction analyses of the corrensites show them to be di/dioctahedral with 060 spacings of 1.501 to 1.508 Å and to contain significantly higher Al:Mg ratios than more common trioctahedral types. Calculated structural formulae are: corrensite, M0.6(Fe3+0.2Mg1.6Al4.6)(Al0.2Si7.8)O20(OH)10; illite/smectite, M1.5(Fe3+0.1Mg1.7Al2.8)(Al1.6Si6.4)O20(OH)4; and smectite, M0.9(Fe3+0.3Mg1.2Al2.8)(Al0.6Si7.4)O20(OH)4.

Chemical similarity between the smectite and the corrensite and pervasive distribution of smectite in low-permeability shales and siltstones suggest that the smectite was a precursor of the corrensite. Three stages of mineral precipitation in the Cutler Formation have been recognized. Quartz precipitated early as grain overgrowths, followed by the formation of authigenic clay minerals, and later calcite cementation which destroyed much of the original rock fabric. Calculations show that aluminous corrensite was favored by elevated temperature (∼ 100°C), low pH, and low dissolved silica. Local hydrothermal fluids rising along the Lisbon fault apparently permeated the Cutler red bed section and precipitated the clay minerals. The assemblage corrensite + illite/smectite in the sandstones probably formed by interaction of formation fluids with smectite and an Al-bearing phase, such as K-feldspar or kaolinite.

It is a high honor to be invited to give this first Brindley Memorial Lecture. I view it as taking the first step on a ladder, to be followed by suceeeding talks that climb higher to the pinnacle that George Brindley erected for us in clay mineralogy. If George were with us, he would be sitting on the front row, as usual, keeping the speakers and audience "honest" in our deliberations. In turn, I would be privileged to ask him personally to enlighten us with his valued opinion on the many questions I will be asking in this talk.

Gabbroic saprolite at Mont Mégantic, Quebec, was studied in detail mineralogically to gain a better understanding of the origin of ferruginous smectite reported previously from these rocks. The parent rock is a ferrogabbro composed of plagioclase, augite, calc-alkalic amphiboles, biotite, olivine, magnetite, ilmenite, and apatite. Extensive weathering has decomposed most of the mafic minerals and magnetite to goethite, lepidocrocite, and iron-rich clay minerals, which occur in numerous microcracks distributed irregularly in the outer shells of boulders and in cracks and fissures in the bedrock. Some of the felsic minerals have altered to kaolinite. The secondary minerals and the more resistant primary minerals, such as plagioclase, ilmenite, and apatite, have subsequently moved to the lower part of the saprolite. The major ferruginous clay minerals present are smectite and vermiculite, which are compositionally similar, except that the smectite is slightly richer in SiO2 and MgO and poorer in Fe2O3 than the vermiculite.

To establish a structural formula for the ferruginous smectite, the oxidation state of Fe in a sample treated with dithionite-citrate-bicarbonate was examined by Mössbauer spectroscopy. All structural iron was found to be ferric. The calculated structural formula of a Na-saturated sample is:

$$N{a_{0.61}}\left( {M{g_{1.39}} + Fe_{0.85}^{3 + }A{l_{0.17}}M{n_{0.03}}} \right)\left( {S{i_{3.49}}A{l_{0.51}}} \right){O_{10}}{\left( {OH} \right)_2},$$

The Upper Pliocene sediments near Lebrija in southern Spain contain commercial deposits of palygorskite and sepiolite. These sediments of continental origin consist chiefly of carbonate, marl, and clay resting on marine Pliocene quartzose sand. The lowest unit, the “Marly-Calcareous Bed,” consists of sepiolite-rich marl associated with concretions and irregular layers of chert, <0.5 m thick, and local diatomite layers, as well as limestone, sandy limestone, marl, and clayey sandstones. This unit has a maximum thickness of 30 m and contains three clay-mineral suites as follows: (1) bottom—sepiolite ± palygorskite; (2) center—sepiolite and palygorskite ± illite; (3) top—palygorskite and illite, ± sepiolite and smectite. Sepiolite decreases and palygorskite and illite increase toward the top, reflecting the composition of detrital material supplied to the basin. Beds 0.5–1 m thick locally and containing 50 to 60% sepiolite have been called “Tierra del Vino” (wine earth) because the material formerly was used to clarify and purify wine. The sepiolite-rich beds are as much as 15 m thick in the eastern part of the area. The upper unit is called the “Palygorskite Bed” because certain layers, 0.3 to 3 m thick, contain 35 to 75% palygorskite. The palygorskite-rich layers are interbedded with limestone and marl, and the entire unit is 15 m thick. The total resource of palygorskite is estimated at about 9 million tonnes.

The sediments are believed to have been deposited in a brackish, lacustrine environment. Originally, tectonic stability and an arid climate favored the formation of sepiolite at about pH 8. Later, after significant weathering of the source rocks, detrital illite was transformed to palygorskite in the Mg- and Si-rich waters. Here, palygorskite was also precipitated directly.

Cacoxenite having the composition (Al4.0Fe22.5O7.1(OH)14.3(PO4)17(H2O)23.7)·50.3H2O was identified in a bed of mature quartz sand in the Miocene Calvert Formation near Popes Creek, Maryland. This is the first reported occurrence of this mineral in Atlantic Coastal Plain sediments north of Florida. The cacoxenite occurs as silt-size to sand-size grains, both as irregularly shaped aggregates and as radiating arrays of delicate acicular crystals. The presence of discrete cores and overgrowths in some grains indicates at least two generations of crystal growth. Electron microprobe analyses reveal excess Si and Al (relative to the ideal composition), which is believed to reflect ultra-fine clay particles within the cacoxenite grains. Admixed clays probably served as a substrate for the formation of ferric oxyhydroxides, which were subsequently converted to cacoxenite through the addition of dissolved phosphorus.

Fifteen iron oxide accumulations from the bottoms of two Finnish lakes (“lake ores”) were found to contain as much as 50% Fe. Differential X-ray powder diffraction and selective dissolution by oxalate showed that the samples consisted of poorly crystallized goethite and ferrihydrite. The crust ores of one lake had higher ferrihydrite to goethite ratios than the nodular ores of the other lake. The higher ferrihydrite proportion was attributed to a higher rate of Fe2+ supply from the ground water and/or a higher rate of oxidation as a function of water depth and bottom-sediment permeability.

Values of Al-for-Fe substitution of the goethites determined from unit-cell dimensions agreed with those obtained from chemical extraction if the unit-cell volume rather than the c dimension was used. In very small goethite crystals a slight expansion of the a unit-cell dimension is probaby compensated by a corresponding contraction of the c dimension, so that a contraction of the c dimension need not necessarily be caused by Al substitution.

The goethites of the two lakes differed significantly in their Al-for-Fe substitutions and hence in their unit-cell sizes, OH-bending characteristics, dehydroxylation temperatures, dissolution kinetics, and Möss-bauer parameters. The difference in Al substitution (0 vs. 7 mole %) is attributed to the Al-supplying power of the bottom sediments: the silty-clayey sediments in one lake appear to have supplied Al during goethite formation, whereas the gravelly-sandy sediments in the other lake did not. The compositions of the goethites thus reflect their environments of formation.

Berthierine (formerly chamosite) occurs as concretions, lenses, and bands in carbonaceous, kaolinitic shale of freshwater coal-swamp deposits in Paleogene and Upper Triassic coal measures of Japan. Textural relations in thin sections of the Triassic berthierine rocks and a siderite-kaolinite-berthierine-quartz assemblage in Paleogene rocks indicate that the berthierine formed by reaction of siderite with kaolinite. The transformation of siderite and kaolinite to berthierine and quartz occurs progressively under reducing conditions between 65° and 150°C and at burial depths of 2–5 km. Utatsu berthierine is an aluminous, low-Mg variety as compared with berthierine pellets in modern marine and estuarine sediments and in ancient marine ironstones. Fe is the dominant octahedral cation with Fe2+ ≫ Fe3+. The composition of the berthierine varies between different morphological types. Utatsu berthierine transformed to ferrous chamosite when kaolinite in the host shale changed to pyrophyllite. These transformations are estimated to have occurred at ∼160°C and at a burial depth of ∼3 km.

The widespread Balıkesir bentonite deposits within the Miocene volcano-sedimentary units in western Anatolia have economic potential; they are important raw materials for the paper and bleaching industries in Turkey. No detailed geological, mineralogical, geochemical, or genesis characterizations of these bentonite deposits have been carried out to date. The present study was undertaken to close this gap. The mineralogical characteristics of the bentonites and their parent rocks were examined using polarized-light microscopy, X-ray powder diffractometry (XRD), scanning- and transmission-electron microscopies (SEM–EDX and TEM), and chemical (ICP–AES and –MS) methods. In the bentonite deposits, smectite is associated with smaller amounts of illite, chlorite, quartz, feldspar, dolomite, calcite, opal-CT, and amphibole. The smectite was identified by sharp basal reflections at 14.42–14.93 Å. Plagioclase and sanidine crystals in volcanic units are altered and sericitized. Biotite and hornblende are partly to completely Fe-(oxyhydr)oxidized and chloritized. Smectite flakes occur on altered feldspar and mica grains and devitrified volcanic glass fragments in association with or without calcite ± dolomite crystals. Increasing Al+Fe+Mg/Si ratios with increasing degree of alteration reveal that hydration of volcanogenic grains (feldspar, mica, hornblende, glass shard) favored precipitation of smectite with montmorillonite composition, with an average structural formula: (Ca0.31Na0.05K0.08)(Al2.72Fe0.17Mg1.27Ti0.011Mn0.01)(Si7.94Al0.06)O20(OH)4. The concentration of Al2O3 and MgO and increase of LREE/HREE ratio, and a distinct, negative Eu anomaly show that smectite was probably formed as a result of the decomposition of volcanic feldspar, mica, amphibole, and volcanic glass. Association of carbonate rocks within the smectite-rich material and the absence of chlorite and detrital materials such as rock fragments in the bentonites suggest that the bentonite deposits formed authigenetically as ‘primary bentonites’ from volcanoclastic materials deposited in a calm lacustrine–palustrine environment during an early diagenetic process.

Shales and claystones in the Permian Irati Formation consist of Al-rich or Fe-Mg clay minerals in its southern/central and northern parts, respectively. The constrasting compositions indicate particular geological and paleo-environmental conditions. The purpose of this study was to determine the conditions of formation by characterizing the black shales and claystones from different sections of the northern edge of the basin, some of which reveal the presence of intruded diabase sills.

Black shales consist of saponite or saponite-talc mixed layers, talc, lizardite, nontronite, and quartz. Green claystones are nontronite-rich but also contain lizardite, talc, and quartz. The chemical compositions of the black shale and claystones, except for one sample (POR-56), exhibit a positive correlation of the TiO2, Cr, and P2O5 contents with Al2O3, which typically results from weathering processes. The presence of saponite, nontronite, and some accessory minerals (spinel, pyroxene, native silver) suggests altered basic-ultrabasic rocks as sediment sources, consistent with the rare earth element (REE) composition being less than the Post-Archean Average Shale (PAAS) or North American Shale Composite (NASC) levels and with negative Ce and Eu anomalies. Sample POR-56 consists largely of nontronite and is anomalously rich in zircon, monazite, and apatite. Chemically, sample POR-56 is different from the black shales and claystones, being richer in Al2O3-Fe2O3, MgO-poor, and having greater REE contents than the PAAS or NASC standards. The POR-56 bed is probably a bentonite resulting from the alteration of volcanic ash in sea water (strong, negative Ce anomaly). The Zr/TiO2vs. Nb/Y relation indicates that the magmatism was andesitic. During the Upper Permian, intermediate to basic volcanic activity was recorded in the Mitu Group of the Central Andes.

Close to the diabase sill, the black shales and claystones contain saponite, talc, and lizardite but nontronite is absent. Saponite and talc crystals, however, exhibit a larger coherent scattering domain size (CSDS) and are randomly oriented with respect to the sedimentary bedding. The thermal metamorphism effect is confirmed by the presence of secondary enstatite-augite and albite crystals.

Numerous occurrences of asbestos minerals, notably chrysotile and tremolite, are to be found on fracture surfaces in thrust fault deformation zones of Cretaceous dunite-harzburgite and pyroxenite in the Çankırı and Ankara regions, central Anatolia, Turkey. Consequently, potential exists for the development of regional malignant mesothelioma. The means of serpentinization, such as reaction of seawater during accretion of the upper ophiolitic mantle crust in a subduction zone and/or following uplift of ophiolitic units and the influence of hydrothermal/meteoric fluids along fractures, were investigated. Cretaceous dunite-harzburgite and localized pyroxenite rocks are mainly composed of serpentinized olivine and pyroxene associated with opaque minerals and Fe-(oxyhydr)oxide phases. Smectite, chlorite, illite, kaolinite, hydromagnesite, goethite, quartz, and opal-CT are also present. Chrysotile and localized tremolite occur either as a mesh, a suboriented to oriented long-fiber bundle, or as fiber-filling millimetric micro-vein textures on relicts of olivine and pyroxene (enstatite, augite). The chrysotile and tremolite have non-pseudomorphic textures developed under high pressure and temperature. The textures suggest authigenic formation of chrysotile and tremolite via a dissolution and precipitation mechanism. Additionally, spherical structures of opal-CT and locally platy hydromagnesite crystals either enclose or are developed within chrysotile/tremolite fiber bundles. The leaching of MgO, Fe2O3, Al2O3, Ni, Cr, and Nb, an increase in the LREE/HREE ratio, and negative Eu anomalies in the dunite-harzburgite and pyroxenite, and asbestos samples suggest that the chrysotile and tremolite were derived from the serpentinization of olivine and pyroxene. The chrysotile and tremolite were developed along fractures by hydrothermal fluid alteration during accretion and/or following the uplift of ophiolitic units of the region under high pressure and temperature conditions. This interpretation is also supported by isotope data and the calculated formation temperature of 170–555°C for chrysotile and tremolite. The average structural formulae for chrysotile and tremolite are (NanK0.03)(Mg5.54Fe0.09Al0.05Ca0.01Mn0.001) (Si3.96Al0.03)O10(OH)8 and (Na0.17K0.07)(Ca1.59Mg0.19Mn0.002)(Mg4.72Fe0.28)(Si7.86Al0.1Fe0.06)O22(OH)2, respectively.

Hydrothermal alteration led to development of the Yarıkçı clay deposit within the Mesozoic chlorite-, muscovite-, chlorite-muscovite-schist, and garnet-graphite phyllite units along NW–SE- and N–S-trending faults in Mihalıççık in western central Anatolia. The geological, mineralogical, and geochemical characteristics and genesis of this economically important clay deposit have not been examined in detail previously. The present study has attempted to fill this gap. Green smectitic and cream kaolinitic claystones are abundant with smaller amounts of gray illite, dark brown Fe oxides, and silica phases occurring as stockwork/fracture infill and stain/coating. These units are covered by a dark, hard, sharp-edged, and thick silica cap. Metamorphic units exhibit cataclastic texture due to tectonic activities. Muscovite is mostly degraded to kaolinite, and feldspars show sericitization and argillization. Kaolinite typically has a platy form with irregular margins and locally sub-rounded, book-like texture suggesting hydrolysis during the hydrothermal injections. The association of Fe oxides, cristobalite/tridymite/quartz, gypsum/anhydrite, and jarosite are indicative of intense hydrothermal activities and development of kaolinite under acidic geochemical conditions. The local enrichment of SiO2, Fe2O3, S, Cu, and Au also supports this suggestion. The leaching of Sr, Rb, Ba, and Zr, and the slight increase in LREE/MREE+HREE ratios together with the negative Eu and Ce anomalies suggest the selective dissolution of muscovite, garnet, feldspar, and pyroxene by the hydrothermal fluids. Thus, abundant claystones of smectite and kaolinite were formed via the increase in Al+Fe+Mg/Si and Al±Fe/Si ratios in the alkaline and acidic environment, respectively, under the tectonic control of hydrothermal activity as seen in the alteration of chlorite, muscovite, and feldspar in metamorphic units.

Widespread alteration in the Miocene lacustrine volcanic/sedimentary rocks of the Ankara-Çankiri basin of central Anatolia has resulted in the formation of sizeable (economic) quantities of bentonite deposits. No detailed characterization of the geological, mineralogical, and geochemical properties or the depositional environments of these primary and secondary bentonite deposits has been carried out to date. The present study was undertaken to close this knowledge gap. Two possible hypothetical processes were examined to explain the genesis of the bentonites: 1) The bentonites were formed by the devitrification of volcanic glass in a lacustrine setting; and 2) The bentonites were formed by the chemical weathering of previously deposited volcaniclastic sediments and ophiolitic materials. The characteristics of the bentonites were examined using X-ray diffractometry, scanning and transmission electron microscopy, energy dispersive spectroscopy, and chemical analyses of major and trace elements. The Ankara-Çankırı bentonites are found gradationally interbedded with parent Miocene volcanic and volcaniclastic rocks. These bentonites were deposited in a shallow lacustrine setting based on observed desiccation cracks, locally enclosed coal seams, plant rootlets, gypsum lenses, yellow sulfate-like fracture infillings, and ferric iron oxide stains. Smectite resulted from the chemical weathering of feldspar and possibly also the weathering of biotite and hornblende. This smectite was precipitated in situ on partially dissolved glass and feldspar. The average major-element composition of the smectite-rich clay fractions yielded the following montmorillonitic smectite structural formula: (Na0.33Ca0.31K0.18) (Al2.35Fe0.80Mg0.78)(Si7.79Al0.21)O20(OH)4.

The interlayer cation occupancy in the smectite-rich clay fractions was based on the use of Na+/(Na++Ca2+) ratios and showed a composition between a Ca-smectite and a Na-smectite. The relative increases in several groups of elements according to the LREE/(MREE+HREE) ratio, Al2O3, the sum of Ni+Co+Cr, the sum of Fe2O3+MgO+TiO2, the positive correlation between Rb+Ba and Na2O+K2O, Sr and Rb, Rb/Sr and Zr, Zr/Sm and SiO2, the negative Eu anomaly, and the field and petrographic observations further showed that the Si, Al, Fe, and Mg required to form smectite were mainly supplied from the decomposition of feldspars, amphiboles, and volcanic glass from volcanic materials and were partially supplied from the chemical weathering of ophiolitic basement units. The bentonite deposits examined in this study are mainly primary bentonites derived from volcanics and local secondary bentonites from previously deposited volcaniclastic sediments and ophiolitic materials.

Kaolin samples from the Jari deposit (Amazon region) were studied using various techniques to characterize its structural and crystallochemical aspects, and to establish its origin and evolution. A profile 60 m thick was selected in a kaolin mine (Morro do Felipe) located at the banks of the Jari river. Despite the great thickness of the deposit and the variety of kaolin types, the mineralogical composition is rather homogeneous and is mainly kaolinite associated with gibbsite and small amounts of quartz, anatase, goethite and hematite. The field observations and the morphological analysis indicate the existence of sedimentary features throughout the whole profile except for the upper aluminous clayey layer (Belterra Clay). This is evidence that the Rio Jari kaolin deposit originated from sedimentary material, the Alter do Chão Formation. The presence of alternating clay and sandy layers is explained by sedimentation processes with great depositional energy variation. Thus, the accumulation of thick clay layers was related to a low-energy phase, and during the high-energy phases, the deposition process led to the accumulation of sandy materials, constituted essentially of quartz and showing strong textural and structural variation. Later on, periods of hydromorphy were responsible for iron removal and consequently for the bleaching of the sedimentary formation. The crystallinity data show an increase of the structural disorder toward the surface associated with an increase in the amount of structural Fe in the kaolinite. The Rio Jari kaolin deposits should be considered as having originated from kaolinitic clay sediments of the Alter do Chão formation (protore) that was submitted to intensive lateritic weathering processes.

A number of different types of bentonite deposits formed by hydrothermal alteration and diagenetic processes are to be found in the Ordu area of the Eastern Black Sea region. The Ca- and Na-bentonite deposits are related to Upper Cretaceous tholeitic to calc-alkaline volcanites, predominantly dacite and andesite, and also include rhyodacite with lesser basalt and their pyroclastic equivalents. In the present study, dacite (PR1), perlite (PR2), moderately altered rocks (MPR), and Na- and Ca-bentonites were studied to describe and compare their mineralogical and geochemical properties and their conditions of formation by means of X-ray diffraction, optical microscopy, scanning electron microscopy, and chemical analytical techniques.

Ca-bentonites, except for smectite, contain opal-CT, feldspar, biotite, and rarely pyrite, while Na-bentonites contain smectite and less feldspar, opal-CT, kaolinite, and illite.

Progressive alteration of the PR2 caused depletion in K2O and Na2O and enrichment in MgO and CaO in all of the Ca-bentonite samples. Na2O was depleted in all of the Na-bentonites and in most of the MPR. The medium and heavy rare earth elements (MREE and HREE) show mass gain or mass loss in the Na-bentonites. The HREE show nearly immobile behavior in the Ca-bentonites. The rare earth elements (REE) and transition elements (TRE) mostly gained mass in the Ca-bentonites in contrast to Na-bentonites. Large-ion lithophile elements (LILE) are strongly depleted in all of the bentonites. The LREE, MREE, and HREE were strongly depleted in most of the MPR samples. TiO2, Lu, Tm, and Tb show immobile behavior in all samples.

PR1 exhibits a slightly positive Eu anomaly. Two MPR samples show slightly positive Eu anomalies (1.03, 1.13), and one Na-bentonite sample displays a slightly positive Eu anomaly (1.04). Most of the Nabentonites have weakly negative Eu anomalies, whereas perlite and the Ca-bentonite have a strongly negative Eu anomaly. The PR1, PR2, MPR, and Na-bentonite present a positive Ce anomaly, and the Ca-bentonite shows a moderately negative Ce anomaly. The Ca-montmorillonites are mainly hydrothermal in origin and derived from alteration of volcanoclastic material in situ and/or in the subaerial environment. The Na-montmorillonites formed by alteration and diagenesis of volcanoclastic material in the sedimentary basin.

Because of their geochemical properties, the Çakmaktepe (Uşak) kaolin deposits have been considered as primary. New sedimentological, mineralogical, and geochemical data suggest that the Çakmaktepe kaolins are secondary deposits of sedimentary processes after hydrothermal alteration of the source rocks. The kaolins in the Çakmaktepe deposit were formed from the hydrothermal alteration of calcalkaline Karaboldere volcanics (KBV). The kaolinized materials were then reworked and accumulated in a lacustrine basin. The argillic alteration zones were associated with faults, and lateral zonation of minerals was observed in the KBV. Smectite was the major phyllosilicate in the ‘outer zone’. The alteration mineralogy of the ‘inner zone’ was similar to that of the Çakmaktepe kaolins and consisted mainly of kaolinite with minor amounts of smectite and alunite. The trace-element abundances in the kaolinized volcanics and the Çakmaktepe kaolins indicated hypogene conditions. The δ18O values of the Çakmaktepe kaolins ranged from 0.2 to 5.92%, which indicated that the Çakmaktepe kaolinites were formed at temperatures between 92 and 156°C, and the δD values ranged from −91.68 to −109.45‰. The irregular edge-to-face morphology, the variation in grain-size, a few broken crystals of kaolinite, the deficiency of dissolution-replacement and crystallization mechanisms, and the the low sphericity, very angular, and poorly sorted quartz crystals in the kaolins all result from transport processes. The sedimentary structures, including trough cross-lamination, tool marks, and load casts, indicate transportation by turbulent waters and deposition of kaolin layers in a shallow lake.