A detailed stratigraphic and facies reconstruction of a bentonitized acid-tuff succession, deposited within the transgressive systems tract of the Upper Miocene-Sarmatian Ser-3 eustatic cycle, at Sajóbábony, northern Hungary, was performed via petrographic, mineralogical and geochemical analyses. The purpose of the work was to analyze the degree of alteration of the volcanogenic sediments, as an indicator of the relative volcanic sedimentation rate. This may have an important role in indicating volcanic periods synchronous with sedimentation or reconstructing the volcanosedimentary paleoconditions. Sample pairs were collected from each bentonite and tuff layer, and, to facilitiate microstratigraphic relations, samples were collected every 10 cm within bentonite layers. Mineralogical analyses were performed by X-ray diffraction and geochemical analyses by inductively coupled plasma-mass spectroscopy.

The CaO/K2O and Eu/La ratios correlate with each other and with a montmorillonite/X-ray-amorphous phase ratio, reflecting Ca and Eu incorporation associated with devitrification and smectite formation. In accordance with the current literature, these mineralogical and geochemical proxies can be related primarily to the weathering processes. Considering vertical distributions in a sequence-stratigraphic context, the Ca content and Eu/La values show that local peaks and Eu anomalies characteristic of acid tuffs show minima at flooding surfaces (FS). Within a bentonite layer, representing a single transgressive period, the repeated events of dust-tuff accumulations have been determined by K2O/CaO and La/Eu peaks, confirmed also by the Eu anomalies in the rare earth element (REE) patterns, thus leading to the conclusion that the level of alteration is closely correlated with the elimination of terrigenous input and a minimum in volcanic sedimentation rate allowing more intensive alteration of the deposited volcanic material. In the case of fine tuff beds, Eu anomalies on REE patterns reflect limited alteration at the bottom and more intensive alteration in the upper parts of the beds, reflecting the effect of infiltration of sea water into the pores.

Seven sedimentary bentonite deposits were investigated in the Miocene series of the Pannonian Basin. The following stratigraphic and genetic characteristics were significant: (1) all deposits were formed within a transgressive series of a given Miocene sequence; and (2) it is possible that the source material of the bentonites is rhyolitic, confirmed by radiometric data proving simultaneous rhyolite tuff volcanism.

A detailed investigation on three lithologically different bentonite horizons within the same transgressive series was made at Sajoábaábony to determine the source material and to determine the causes of the differences. X-ray diffraction, differential thermal analysis and geochemical data of the different lithological types show that they all have rhyolitic source material, although in the case of the lowermost horizon the existence of reworked material from an underlying andesite tuff series is also presumed. The main difference is the degree of weathering. Considering the ratio between the amorphous phase and the montmorillonite, the amorphous volcanic glass can be regarded as the main source of the montmorillonite formation. The differences in the degree of alteration can be related to the changing characteristics of the tuff accumulation and the sedimentation. Transgression decreases the sedimentation rate allowing the optimal alteration of the amorphous phase. The increasing intensity of the tuff accumulation can also limit the bentonite formation because rapid deposition and burial present too little time for the optimal alteration of the amorphous phase.

Summarizing the results from the stratigraphic interpretation of the bentonite deposits and from the comparative analyses of the different bentonite horizons within the same transgressive systems tract, we can state that the relationship of the tectonic-related tuff accumulation and the eustasy-related sedimentation rate can affect both the possibility of bentonite formation in macro-scale and the degree of bentonitization in micro-scale.

Over 40 years ago, Raup and Sepkoski identified five episodes of elevated extinction in the marine fossil record that were thought to be statistically distinct, thus warranting the term the “Big Five” mass extinctions. Since then, the term has become part of standard vocabulary, especially with the naming of the current biodiversity crisis as the “sixth mass extinction.” However, there is no general agreement on which time intervals should be viewed as mass extinctions, in part because the Big Five turn out not to be statistically distinct from background rates of extinction, and in part, because other intervals of time have even higher extinction rates, in the Cambrian and early Ordovician. Nonetheless, the Big Five represent the five largest events since the early Ordovician, including in analyses that attempt to compensate for the incompleteness of the fossil and rock records. In the last 40 years, we have learned a great deal about the causes of many of the major and minor extinction events and are beginning to unravel the mechanisms that translated the initial environmental disturbances into extinction. However, for many of the events, further understanding will require going back to the outcrop, where the patchy distribution of environments and pervasive temporal gaps in the rock record challenge our ability to establish true extinction patterns. As for the current biodiversity crisis, there is no doubt that the rate of extinction is among the highest ever experienced by the biosphere, perhaps the second highest after the end-Cretaceous bolide impact. However (and fortunately), the absolute number of extinctions is still relatively small – there is still time to prevent this becoming a genuine mass extinction. Given the arbitrariness of calling out the Big Five, perhaps the current crisis should be called the “incipient Anthropocene mass extinction” rather than the “sixth mass extinction.”

A correlation and interpretation of the sequence stratigraphy of the lower Cambrian strata of NW France is presented and used to characterize basin-wide controls on processes of sedimentation. Deposition occurred in two basins, as two third-order stratigraphic sequences. A northern basin in the Cotentin was dominated by deposition of marine siliciclastic sediments of Sequence 1 (Cambrian Stages 2–3). The primary sediment input was from the NW at La Hague. A middle Normandy basin, SW of Caen, was characterized by deposition of platform carbonates and fine-grained, offshore siliciclastics in Sequence 1 and fluvio-deltaic and marine siliciclastics in Sequence 2 (Cambrian Stages 3–4). Major sediment input points lay to the west in Brittany and to the NE of Caen (in Sequence 2). Lowstand and transgressive systems tract strata dominate both sequences, with local preservation of highstand deposits in basin-centre locations. Fluvial deposits occur at basin margins and display sandstone-dominated facies typical of prevegetation systems. Two styles of fluvially dominated siliciclastic delta are recognized, which show delta-front strata composed of fluvial channels overlying either wave-formed deposits or hyperpycnites. The former formed on shallow shelves, whereas the latter formed where basin bathymetry was steeper and commonly fault controlled. Fossil microbial life forms are conspicuous in Sequence 1, as are intervals of low-diversity bioturbation. The balance of life forms is consistent with the punctuated replacement of algal matgrounds with mixgrounds during early Cambrian time. Super-mature quartz arenites were formed by high-energy wave processes on slowly aggrading basin flanks following marine transgression.

An integrated study of sedimentological, sequence-stratigraphic and palaeodispersal analysis was applied to the Upper-Permian clastic sedimentary succession in the Northern Sydney Basin, Australia. The succession is subdivided into fifteen facies and three facies associations. The facies associations are further subdivided into eight sub-facies associations. The sedimentary evolution involves progradation from delta-front to delta-plain to fluvial depositional environments, with a significant increase in sediment grain size across the unconformable contact that separates the deltaic from the overlying fluvial system. In contrast to the delta front that is wave/storm- and/or river-influenced, the delta plain is significantly affected by tides, with the impact of tidal currents decreasing up-sequence in the delta plain. The general lack of wave-influenced sedimentary structures suggests low wave energy in the delta plain. The abrupt termination of the tidal impact in the fluvial realm relates to the steep topographic gradients and high sediment supply, which accompanied the uplift of the New England Orogen. The sequence-stratigraphic framework includes highstand (deltaic forest and topset) and lowstand (fluvial topset) systems tracts, separated by a subaerial unconformity. In contrast to most of the mud-rich modern counterparts, this is an example of a sand-rich tidally influenced deltaic system, developed adjacent to the source region. This investigation presents a depositional model for tidal successions in regions of tectonic uplift and confinement.

A review of the sequence stratigraphic development of the Tertiary basins of the North and West Alpine Foreland domains shows that their structural and depositional history was episodically affected by brief tectonic phases. These were associated with intermittent deformation events induced by the collisional convergence and compressional coupling of the Apulian and Iberian microplates with the European Plate. The plate kinematics-related episodicity was essentially isochronously recorded in the basin fills of the Alpine Foreland region. These are generally correlative with changes in eustatic sea level. The ensuing correlative successions of so-called Cenozoic Rift and Foredeep (CRF) sequences and phases can be traced throughout the European Cenozoic Rift System and Alpine Foreland Basin. Their temporal correlation indicates that, apparently, the changes in the plate collision-related stress regime of the Alpine Foreland were repeatedly accompanied by coeval changes in eustatic sea level. To test and substantiate the validity of this inferred causal relationship between intraplate deposition, plate kinematics and eustacy, the tectono-sedimentary evolution of the basins of the Mediterranean plate-boundary zone has been analysed in conjunction with a review of the plate-boundary events in the North Atlantic. Within the uncertainty range of available datings, synchroneity could thus be demonstrated for the punctuated tectonostratigraphic development of basins of the western Mediterranean (comprising the Liguro-Provençal Basin, Valencia Trough, Sardinia Rift and Tyrrhenian Basin), the Apenninic-Calabrian Arc, the Betic domain (including the Alboran Basin) and the North and West Alpine Foreland regions. Similar temporal correlations of plate tectonicsrelated events near the Mid-Atlantic Ridge in the North Atlantic and tectonostratigraphic sequences and phases of the Alpino-Pyrenean Foreland basins are further evidence of a common causal mechanism. The driving mechanisms appear to have been the northward drift of Africa and the resulting mechanical coupling of Apulia and Iberia with the southern passive margin of Europe, as well as the stepwise opening of the North Atlantic and accompanying episodic plate re-organisations of the Mid-Atlantic Ridge.

The Late Cretaceous and Cenozoic sedimentary record in the Campine Basin along the southern border of the North Sea Basin is analysed in terms of sequence stratigraphy. All available biostratigraphic, and in some cases, magnetostratigraphic data are used to constrain the sequence chronostratigraphy. The relative geographic extent of the strata is used as an indication of the relative sea level. Tectonic and eustatic components could be distinguished in several cases using regional geological information. Generally, sequences consist of transgressive and highstand systems tracts only and have flat, abrasion-type lower boundaries. Lowstand deposits are only identified as infill of erosional space, which generally implies marked tectonic uplift. Several eustatic and tectonic events can be correlated with similar events known elsewhere in the North Sea Basin. The time intervals spanned by the different sequences vary considerably, pointing out different control mechanisms.

Lake Lisan, the late Pleistocene precursor of the Dead Sea, existed from ∼70,000 to 15,000 yr B.P. It evolved through frequent water-level fluctuations, which reflected the regional hydrological and climatic conditions. We determined the water level of the lake for the time interval ∼55,000–15,000 cal yr B.P. by mapping offshore, nearshore, and fan-delta sediments; by application of sequence stratigraphy methods; and by dating with radiocarbon and U-series methods. During the studied time interval the lake-level fluctuated between ∼340 and 160 m below mean sea level (msl). Between 55,000 and 30,000 cal yr B.P. the lake evolved through short-term fluctuations around 280–290 m below msl, punctuated (at 48,000–43,000 cal yr B.P.) by a drop event to at least 340 m below msl. At ∼27,000 cal yr B.P. the lake began to rise sharply, reaching its maximum elevation of about 164 m below msl between 26,000 and 23,000 cal yr B.P., then it began dropping and reached 300 m below msl at ∼15,000 cal yr B.P. During the Holocene the lake, corresponding to the present Dead Sea, stabilized at ca. 400 m below msl with minor fluctuations. The hypsometric curve of the basin indicates that large changes in lake area are expected at above 403 and 385 m below msl. At these elevations the lake level is buffered. Lake Lisan was always higher than 380 m below msl, indicating a significantly large water contribution to the basin. The long and repetitious periods of stabilization at 280–290 m below msl during Lake Lisan time indicate hydrological control combined with the existence of a physical sill at this elevation. Crossing this sill could not have been achieved without a dramatic increase in the total water input to the lake, as occurred during the fast and intense lake rise from ∼280 to 160 m below msl at ∼27,000 cal yr B.P.

The historical site of the Monte Mario lower Pleistocene succession (Rome, Italy) is an important marker of the Pliocene/Pleistocene boundary. Recently, the Monte Mario site was excavated and restudied. A spectacular angular unconformity characterizes the contact between the Monte Vaticano and the Monte Mario formations, which marks the Pliocene/Pleistocene boundary. Biostratigraphical analyses carried out on ostracod, foraminifer, and calcareous nannofossil assemblages indicate an Early Pliocene age (topmost Zanclean, 3.81–3.70 Ma) for the underlying Monte Vaticano Formation, whereas the Monte Mario Formation has been dated as early Pleistocene (Santernian, 1.66–1.59 Ma). Palaeomagnetic analyses point to C2Ar and C1r2r polarity chrons for the Monte Vaticano and the Monte Mario formations, respectively. The Monte Mario Formation consists of two obliquity-forced depositional sequences (MM1 and MM2) characterized by transgressive systems tracts of littoral marine environments at depths, respectively, of 40–80 m and 15–20 m. The data obtained from foraminifer and ostracod assemblages allow us to reconstruct early Pleistocene relative sea-level changes near Rome. At the Plio/Pleistocene transition, a relative sea-level drop of at least 260 m occurred, as a result of both tectonic uplift of the central Tyrrhenian margin and glacio-eustatic changes linked to early Pleistocene glaciation (Marine Isotope Stage 58).

In this paper we describe the stratigraphy and sediments deposited in Lake Samra that occupied the Dead Sea basin between ∼ 135 and 75 ka. This information is combined with U/Th dating of primary aragonites in order to estimate a relative lake-level curve that serves as a regional paleohydrological monitor. The lake stood at an elevation of ∼ 340 m below mean sea level (MSL) during most of the last interglacial. This level is relatively higher than the average Holocene Dead Sea (∼ 400 ± 30 m below MSL). At ∼ 120 and ∼ 85 ka, Lake Samra rose to ∼ 320 m below MSL while it dropped to levels lower than ∼ 380 m below MSL at ∼ 135 and ∼ 75 ka, reflecting arid conditions in the drainage area. Lowstands are correlated with warm intervals in the Northern Hemisphere, while minor lake rises are probably related to cold episodes during MIS 5b and MIS 5d. Similar climate relationships are documented for the last glacial highstand Lake Lisan and the lowstand Holocene Dead Sea. Yet, the dominance of detrital calcites and precipitation of travertines in the Dead Sea basin during the last interglacial interval suggest intense pluvial conditions and possible contribution of southern sources of wetness to the region.

The Maastrichtian–Danian benthic foraminiferal diversity and assemblages through sequence stratigraphy were studied at Dakhla Oasis, Egypt. Benthic foraminifera numbers (BFN), high-flux species and characteristic benthic foraminiferal species and genera distribution are also incorporated to assess palaeobathymetry, palaeoenvironment and palaeoproductivity. All these proxies are then taken together to construct a sea-level curve and interpreted in terms of regional tectonics, climate and eustasy. Data suggest a remarkably highly equitable benthic environment deposited in a brackish littoral and/or marsh setting with moderate (?) to low oxygen conditions and reduced salinity (oligotrophic), possibly due to increased precipitation and terrestrial runoff. The interrupted dominance of calcareous forms and high-organic-flux species suggests occasional marine incursions and high palaeoproductivity, due to local upwelling. The inferred sea-level curve replicates the global eustatic curve and suggests that the curve is more influenced by the prevailing climate and global eustasy rather than by regional tectonics. The post-Cretaceous–Palaeogene boundary displays improvement in the environment in terms of diversity and number of species and specimens, with a marked reduction in the abundance of high-organic-flux species during early Paleocene (Danian) time, indicating a shift from a more mesotrophic open marine environment to much reduced oligotrophic conditions.

The 35.5 m thick Anisian section of theWinterswijkse Steen- en Kalkgroeve (Eastern Netherlands) comprises the Upper Röt (Upper Röt Claystone Member) to the basal Lower Muschelkalk (Oolith Member). In the section 15 terrestrial or marine influenced parasequences are recognized. A fourth order sequence shows the increasing marine influence. New marker beds, ten vertebrate track beds, three bone beds and cephalopod remains have been documented. This enabled correlation to other sections in NW Germany. The tracks found in the Winterswijkse Steen- en Kalkgroeve at the boundary Röt/Lower Muschelkalk are linked to the oldest known vertebrate skeleton remains of the Germanic Basin. It is the first time that the exact stratigraphic position of these vertebrate remains has been established. In the terrestrial influenced section of the Winterswijkse Steen- en Kalkgroeve, the well preserved vertebrate track ways and vertebrate fauna will be of international importance and will provide new data of theTriassic carbonate tidal flat megatracksite concept and reptiles living in this environment.

An integrated stratigraphical analysis emphasizing organic-walled dinoflagellate cyst (dinocyst) distribution has been carried out on multiple boreholes penetrating the Miocene in the subsurface of the Netherlands (southern North Sea Basin). The bulk of the investigated successions is attributed to the Breda Formation, a regional lithostatigraphical unit most complete in the south-eastern part of the Netherlands. In concert with a first regional integrated bio (chrono) sequence-stratigraphical framework, fourteen informal dinocyst zones for the southern North Sea Miocene (SNSM), and three subzones are proposed for the Breda Formation. By also integrating (chrono)stratigraphic information from Mediterranean and North Atlantic dinocyst studies a first ever detailed age-model is here proposed for the Miocene in the subsurface of the Netherlands.

Jurassic shallow marine to non-marine depositional sequences are among the most important economic targets in the North Sea. Detailed, ‘high resolution’ stratigraphy of these sequences has become a necessity in both predictive geological exploration models as well as in production reservoir models. In these paralic sequences, palynomorphs are the most abundant (micro) fossil group. Palynology is increasingly challenged to improve the biostratigraphic control, and to support the sequence stratigraphical framework. Based on a recently developed, conceptual Sporomorph EcoGroup model, the quantitative distribution patterns of terrestrial palynomorphs are grouped in six Sporomorph EcoGroups (SEGs), viz. Upland, Lowland, River, Pioneer, Coastal, and Tidally-influenced SEG. Application of the SEG model to data from a marginal marine, uppermost Callovian - Middle Oxfordian section of NAM well F17-4 from the southern part of the Central North Sea Graben allows the recognition of sea-level fluctuations and climate changes. A marked palaeoclimatic shift occurred in the earliest Middle Oxfordian. The relatively cool-subtropical, humid climate changed into a warmer, subtropical-tropical, drier climate. The sea-level reconstructions based on the SEG model are validated against a latest Callovian - Earliest Oxfordian depositional sequence.

Preliminary stable oxygen isotope data are presented from the southern North Sea Basin successions, ranging from the Lutetian to Rupelian. Analyses were performed on fish otoliths, nuculid bivalves and benthic foraminifera and are presented as bulk δ18O values relative to a well established regional sequence stratigraphic framework. The most significant positive shift in δ18O values clearly falls at the top of the regionally recognised Bassevelde 3 sequence, which base corresponds to the Eocene-Oligocene GSSP boundary. The here documented δ18O shift is closely associated with the base of the traditional Rupelian unit-stratotype and is tentatively correlated to the globally recognised Oi-1 event.

The Late Cretaceous and Cenozoic sedimentary record in the Campine Basin along the southern border of the North Sea Basin is analysed in terms of sequence stratigraphy. All available biostratigraphic, and in some cases, magnetostratigraphic data are used to constrain the sequence chronostratigraphy. The relative geographic extent of the strata is used as an indication of the relative sea level. Tectonic and eustatic components could be distinguished in several cases using regional geological information. Generally, sequences consist of transgressive and highstand systems tracts only and have flat, abrasion-type lower boundaries. Lowstand deposits are only identified as infill of erosional space, which generally implies marked tectonic uplift. Several eustatic and tectonic events can be correlated with similar events known elsewhere in the North Sea Basin. The time intervals spanned by the different sequences vary considerably, pointing out different control mechanisms.

Petroleum geologists always need to deal with large gaps in data resolution and coverage during reservoir characterisation. Seismic data show only large geological structures, whereas small-scale structures and reservoir properties can be observed only at well locations. In the area between wells, these properties are often estimated by means of geostatistics. Numerical simulation of sedimentary processes offers an alternative method to predict these properties and can improve the understanding of the controls on reservoir heterogeneity. Although this kind of modelling is widely used on basin scale in exploration geology, its application on field scale in production geology is virtually non-existent. We have assessed whether the recent developments in numerical modelling can also aid petroleum geologists in the interpretation of the reservoir geology.

Seismic data, well data and a process-response model for coastal environments were used to characterise the Lower Cretaceous oil-bearing Rijn Field. Interpretation of seismic and well data led to a definition of the structural setting and the depositional model of the Rijn Member in the area. From the sedimentological interpretation the sea-level history could be estimated, which is the one of the most important input parameters for the process-response model.

Application of the process-response simulator to the Rijn Field resulted in approval of the depositional model. The output was presented in a 2-dimensional north-south profile, which corresponds very well to the well logs along this section. The results demonstrate that numerical simulations of geological processes can be very useful as a tool to explore many likely geological scenarios. While it cannot be used to supply a unique solution in many cases, it forms a helpful guide during reservoir characterisation to find an optimal scenario of the controls on deposition of the Rijn Member, which contributes to the understanding of the inter-well reservoir heterogeneity.

This paper provides a concise review of investigations into the Cenozoic stratigraphy of the Danish North Sea Basin. In the Danish North Sea, mainly Pliocene and Pleistocene strata are found. Results of published seismic and sequence stratigraphic analyses are combined with biostratigraphic analyses and correlated to marine formations found onshore.

The Oligocene sedimentary succession in the eastern North Sea is revised and re-interpreted by applying new state-of-the-art reflection seismic data integrated with new bio- and Sr-stratigraphy data from three key wells in the study area. The Oligocene succession in the eastern North Sea is divided into four transgressive–regressive (T-R) sequences, characterized by non-accretional and/or aggradational transgressive systems tracts and prograding regressive systems tracts. Detailed studies of three wells, including biostratigraphy and Sr analysis, constrain the age relationships between the T-R sequences. Internal clinoform geometry indicates that the sediments were sourced from the present southern Norwegian mainland to the north of the depositional area. The direction of progradation shifted from being SE-directed in the earliest Rupelian (early Oligocene) to S- and SW-directed during Chattian time (late Oligocene). Rapid basin subsidence is indicated by the development of non-accretionary transgressive systems tracts, with subsequent progradation into water depths of hundreds of metres. The creation of accommodation space was out of phase relative to eustatic sea-level changes, and mainly controlled by regional-scale differential vertical movements where uplift and exposure of landmasses of the hinterland (southern Norway) occurred concurrently with basin subsidence. Halokinesis had an intra-basinal influence on the main sediment transport direction, but probably did not contribute much in creation of accommodation space.