Coffee berry diseases (CBD) pose significant threats to coffee production worldwide, affecting the livelihoods of millions of farmers and the global coffee market. Fractional calculus provides a powerful framework for describing non-local and memory-dependent phenomena, making it suitable for modelling the long-range interactions inherent in CBD spread. This study aims to formulate and analyse fractional order model for CBD transmission dynamics in the sense of Atangana–Baleanu–Caputo. Fixed point theorems were utilised to test the existence and uniqueness of the model’s solutions using fractional order. The basic reproduction number was calculated utilising the next-generation matrix. The model has locally asymptotically stable equilibrium positions (disease-free and endemic). Furthermore, the Lyapunov function was used to conduct a global stability analysis of the equilibrium locations. A numerical simulation of the CBD model was created using the fractional Adam–Bashforth–Moulton approach to validate the analytical findings. Our findings contribute to the development of more accurate predictive models and inform the design of targeted interventions to mitigate the impact of CBD on coffee production systems.

In previous research, several computational methods have been proposed to analyse the navigation, transportation safety and collision risks of maritime vessels. The objective of this study is to use Automatic Identification System (AIS) data to assess the collision risk between two vessels before an actual collision occurs. We introduce the concept of an angle interval in the model to enable real-time response to vessel collision risks. When predicting collision risks, we consider factors such as relative distance, relative velocity and phase between the vessels. Lastly, the collision risk is divided into different regions and represented by different colours. The green region represents a low-risk area, the yellow region serves as a cautionary zone and the red region indicates a high-alert zone. If a signal enters the red region, the vessel's control system will automatically intervene and initiate evasive manoeuvres. This reactive mechanism enhances the safety of vessel operations, ensuring the implementation of effective collision avoidance measures.

This paper presents the concept of a lifting-wing quadcopter unmanned aerial vehicle (UAV), a vertical take-off and landing vehicle (VTOL) with a rear wing, a canard at its front and four propellers. The aerodynamic surfaces are designed so that their mounting angle can be adjusted and fixed before flight, so its performance in transition flight can be studied for a combination of wing and canard mounting angles. A dynamic model using rigid-body equations of motion is presented, which is used to compute the transition flight trajectory from hover to cruise in horizontal flight. The trim conditions were computed for a range of fixed wing and canard mounting angles to study the effects of these variables on transition trajectory parameters such as required power, body pitch angle and propeller rotation speeds as a function of flight speed. Furthermore, a transition flight control algorithm is presented, which has a cascaded PID controller and a reference scheduler to switch between the proper reference states, controls and control allocation matrix. Finally, the transition control algorithm of the conceptual UAV is numerically simulated. Results show that this configuration can perform a fast and smooth transition from hover to cruise flight using the proposed flight control algorithm, substantially reducing required propulsive power in cruise of up to 64%. The application of the control algorithm made notable a transition manoeuver that consists of negatively inclining the aircraft at a negative pitch angle, initially at high intensity, and as the final cruising speed approaches, the inclination is attenuated until the equilibrium pitch angle is reached. Simultaneously with the negative inclination of the pitch angle, there is a slight drop in altitude, which is quickly resumed as the trajectory develops until the final cruising speed. Lastly, this aircraft configuration can be widely used in applications where performance gains in operations currently carried out by multicopters, which cover large distances and need long flight time, would bring great operational advantages.

This study investigates the effect of a transverse magnetic field on high-voltage pulsed discharge in helium at a pressure of 30 Torr. A simple two-dimensional fluid model that describes the high-voltage pulsed discharge in helium in a transverse weak magnetic field (B = 0.4 T) is presented, which uses an empirical relation to account for the magnetic field. The results of using the empirical relation for the effective field agree well with the experimental results. The dynamics of discharge development in the presence of the magnetic field is also investigated. The magnetic field does not significantly affect the gas-discharge development dynamics in helium at a pressure of 30 Torr.

In order to investigate the three-dimensional effects on the flow characteristics of the thin water film for the three-dimensional wings, the numerical simulation of the droplet impingement and film flow on the MS-0317 wing is implemented based on the open-source package OpenFOAM. The simulation focuses on the effects of the angle-of-attack and the angle of sweepback. The movement and impingement of the droplets are calculated using the Lagrangian method, and the film flow is simulated using the thin film assumption and the finite area method. The simulation of the water film flow of the three-dimensional MS-0317 wing shows that there is a spanwise flow of the water film due to the three-dimensional effects. This suggests that more research should be conducted on the warm glaze ice with surface water film of three-dimensional ice accretion on three-dimensional geometries.

Infrared analyses of clay mineral samples are usually performed by transmission techniques. While transmission measurements are easy and inexpensive, the sample preparation plays a critical role in the quality of the data. Alternatively, attenuated total reflection (ATR) provides a powerful and often simpler analysis method. However, the ATR spectra reveal significant differences when compared to transmission spectra sometimes leading to confusion in the interpretations. Indeed, optical effects play a prominent role in the ATR spectral profile and their identification is mandatory for obtaining quantitative information regarding molecular/particle orientation or film thickness. The objective of the present study was to perform exact spectral simulations of montmorillonite films by making use of optical theory, including the determination of the anisotropic optical constants from the experimental reflectance spectra by Kramers-Kronig (KK) transformation. This methodology was used: (1) to choose the appropriate optical conditions for advanced and reliable characterization of clay minerals; (2) to extract quantitative information such as the estimation of the film thickness; and (3) to discriminate optical phenomena (optical interferences) from chemical/structural features of the sample.

A compressible large eddy simulation (LES) is performed to study a pulsed jet actuator that is used to control a turbulent axisymmetric bluff body wake. The actuator is driven at low-frequency ($f = 200$Hz, $S{t_\theta } = 0.029$) and high amplitude (${C_\mu } = 0.034$). The numerical scheme and a suitable boundary condition for the pulsed jet are validated, showing good agreement with experimental results. A comparison of the velocity boundary condition and the moving boundary condition shows that, in the vicinity of the orifice/slot and in the downstream region, the results from these two methods are identical, while the fluid behaviour inside the cavity shows difference. An analysis of the pulsed jet actuator shows that the phase lag of the cavity pressure is determined by the integration of the diaphragm motion and the pulsed jet. The mean total pressure distribution shows that the total pressure loss is concentrated in the vicinity of the slot. Dynamic mode decomposition (DMD) on the pressure field is used to extract coherent structures which oscillate with the same frequency as that of the diaphragm motion. Some small-scale high-frequency structures are also apparent.

A high-load counter-rotating compressor is optimised based on the method of coupling aerodynamic optimisation technology and computational fluid dynamics, and the flow structures in the passage are analysed and evaluated by vorticity dynamics diagnosis. The results show that the aerodynamic performance of optimised compressor are obviously improved at both design point and off-design point. By comparing the distribution characteristics of vorticity dynamics parameters on the blade surface before and after the optimisation, it is found that BVF (boundary vorticity flux) and circumferential vorticity can effectively capture high flow loss regions such as shock waves and secondary flow in the passage. In addition, the BEF (Boundary enstrophy flux) diagnosis method based on the theory of boundary enstrophy flux is developed, which expands the application scenario of the boundary vorticity dynamics diagnosis method. The change of vorticity dynamics parameters shows blade geometric parameters’ influence on the passage’s viscous flow field, which provides a theoretical basis for the aerodynamic optimisation design.

This paper aims to present a vertical take-off and landing unmanned aerial vehicle (VTOL UAV) configuration and numerically simulate its flight transition from hover to cruise and from cruise to hover. It can tilt the canard and wing along with two attached propellers. Additionally, two fixed front propellers are pointing upwards. Multi-body equations of motion are derived for this concept of aircraft, which are used to compute the flight transition trajectory from hover to cruise configuration. Furthermore, a transition control algorithm based on gain scheduling is described, which stabilises the aircraft while it accelerates from hover to cruise, gradually tilting the wing along with its propellers, sequentially switching between equilibrium states, as the stability cost functions thresholds are reached. The transition control algorithm of the conceptual aircraft model is numerically simulated.

The unstart phenomenon of supersonic inlets caused by backpressure is dangerous for aircraft during flights because it severely reduces the air mass flow rate through the engine. We used unsteady numerical simulations to evaluate the unstart and restart characteristics of a two-dimensional supersonic inlet during rapid backpressure changes. The effects of the depressurisation time and depressurisation value on the inlet flow characteristics and restart features are discussed. The results show that the depressurisation time affects the restart procedure when the back pressure drops from the inlet unstart value to the normal working state value. When the depressurisation time decreases, it becomes easier for the inlet to restart. However, the inlet cannot restart if the depressurisation time is too long. When the depressurisation time and value were large enough, a short buzz period occurred before the inlet restarted. Both the time and value of depressurisation affected the restart characteristics.

A local positional system (LPS) is proposed, in which particles are launched at given velocities, and a sensor system measures the trajectory of the particles in the platform frame. These measurements allow us to restore the position and orientation of the platform in the frame of the rotating Earth, without solving navigation equations. When the platform velocity is known and if the platform orientation stays the same, the LPS technique allows a navigational accuracy of 100 $\mu$m per one hour to be achieved. In this case, the LPS technique is insensitive to the type of platform trajectory. If there are also velocimeters installed on the platform, then one can restore the platform velocity and angular rate of the platform rotation with respect to the Earth. Instead of navigational equations, it is necessary to obtain the classical trajectory of a particle in the field of a rotating gravity source. Taking into account the gravity-gradient, Coriolis, and centrifugal forces, the exact expression for this trajectory is derived, which can be widely used in atomic interferometry. A new iterative method for restoring the orientation of the platform without using gyroscopes is developed. The simulation allows us to determine the conditions under which the LPS navigation error per hour is approximately $10$ m.

Atmospheric simulation data present richer information in terms of spatiotemporal resolution, spatial dimension, and the number of physical quantities compared to observational data; however, such simulations do not perfectly correspond to the real atmospheric conditions. Additionally, extensive simulation data aids machine learning-based image classification in atmospheric science. In this study, we applied a machine learning model for tropical cyclone detection, which was trained using both simulation and satellite observation data. Consequently, the classification performance was significantly lower than that obtained with the application of simulation data. Owing to the large gap between the simulation and observation data, the classification model could not be practically trained only on the simulation data. Thus, the representation capability of the simulation data must be analyzed and integrated into the observation data for application in real problems.

Intense acoustic loads from jet noise cause noise pollution and induce failures, such as the malfunctioning of electronic devices and fatigue failure of internal/external structures. Consequently, the prediction of jet noise characteristics is crucial in the development of high-speed vehicles. This study presents acoustic experiments and predictions for an under-expanded, unheated jet using a small-scale prototype. Outdoor measurements are carried out using a vertical ejection setup. Acoustic characteristics are measured using both linear and circular microphone arrays. Additionally, numerical prediction of the same jet noise is performed using a detached eddy simulation and the permeable Ffowcs-Williams and Hawkings acoustic analogy. The vertical experimental setup exhibits the typical acoustic characteristics of a supersonic jet in terms of directivity and broadband shock-associated noise. Moreover, the numerical prediction exhibits satisfactory accuracy for the jet downstream, where the large-scale turbulence structures of the directivity predominate. However, discrepancy increases in the domain of lower directivity. The presented experiment and prediction will be extended to future studies regarding the noise of various deflector duct configurations impinging on supersonic jets.

Several types of equipment have been developed over the years to assist ship operators with their tasks. Nowadays, navigational equipment typically provides an enormous volume of information. Thus, there is a corresponding need for efficiency in how such information is presented to ship operators. Augmented reality (AR) systems are being investigated for such efficient presentation of typical navigational information. The present work is particularly interested in an AR architecture commonly referred as monitor augmented reality (MAR).

In this context, the development of MAR systems is briefly summarised. The projection of three-dimensional elements into a camera scene is presented. Potential visual assets are proposed and exemplified with videos from a ship manoeuvring simulator and a real experiment. Enhanced scenes combining pertinent virtual elements are shown exemplifying potential assistance applications. The authors mean to contribute to the popularisation of MAR systems in maritime environments. Further research is suggested to define optimal combinations of visual elements for alternative maritime navigation scenarios. Note that there are still many challenges for the deployment of MAR tools in typical maritime operations.

The design of a two-dimensional supersonic inlet with large bleed window at low Mach number was developed. Numerical simulation and wind tunnel experiments were carried out to investigate the aerodynamic performance and variable geometric rules of the inlet. The result indicates that the single-degree-of-freedom variable geometry scheme adopted in this paper guarantees the steady work of the inlet over a wide speed range. The large bleed window caused by rotation of the compression ramp appears near the throat at low Mach number. Low-pressure airflow near the bleed window neutralises the original high-pressure airflow behind the shock train, which decreases the overall pressure of the downstream region of the internal contraction section. To match the lower pressure, the structure of the shock train changes from strong $\lambda$-type to weak $\lambda$-type, and finally to a normal shock wave as backpressure increases at Mach number 2.5. Herein, the total pressure recovery coefficient of the inlet near the critical condition improves by 8.5% as the backpressure ratio (Pe/P0) adds from 13 to 14.6 at Mach number 2.5. It proves that the scheme is effective on terminal shock wave control and inlet performance improvement. In addition, due to the background wave and the bleed window, two kinds of shock wave oscillation occur when the backpressure ratio is 13.1.

Feedback from supernovae (SNe) is an essential mechanism that self-regulates the growth of galaxies. We build an SN feedback model based on high-resolution simulations of superbubble and SN-driven outflows for the physical understanding of the galaxy–CGM connection. Using an Eulerian hydrodynamic code Athena++, we find universal scaling relations for the time evolution of superbubble momentum, when the momentum and time are scaled by those at the shell-formation time. We then develop an SN feedback model utilizing Voronoi tessellation, and implement it into the GADGET3-Osaka smoothed particle hydrodynamic code. We show that our stochastic thermal feedback model produces galactic outflow that carries the metals high above the galactic plane but with weak suppression of star formation. Additional mechanical feedback further suppresses star formation. Therefore, we argue that both thermal and mechanical feedback is necessary for the SN feedback model of galaxy evolution when an individual SN bubble is unresolved.

The aerodynamic performance of a deployable and low-cost unmanned aerial vehicle (UAV) is investigated and improved in present work. The parameters of configuration, such as airfoil and winglet, are determined via an optimising process based on a discrete adjoint method. The optimised target is locked on an increasing lift-to-drag ratio with a limited variation of pitching moments. The separation that will lead to a stall is delayed after optimisation. Up to 128 design variables are used by the optimised solver to give enough flexibility of the geometrical transformation. As much as 20% enhancement of lift-to-drag ratio is gained at the cruise angle-of-attack, that is, a significant improvement in the lift-to-drag ratio adhering to the preferred configuration is obtained with increasing lift and decreasing drag coefficients, essentially entailing an improved aerodynamic performance.