Compound-specific radiocarbon (14C) dating often requires working with small samples of < 100 µg carbon (µgC). This makes the radiocarbon dates of biomarker compounds very sensitive to biases caused by extraneous carbon of unknown composition, a procedural blank, which is introduced to the samples during the steps necessary to prepare a sample for radiocarbon analysis by accelerator mass spectrometry (i.e., isolating single compounds from a heterogeneous mixture, combustion, gas purification and graphitization). Reporting accurate radiocarbon dates thus requires a correction for the procedural blank. We present our approach to assess the fraction modern carbon (F14C) and the mass of the procedural blanks introduced during the preparation procedures of lipid biomarkers (i.e. n-alkanoic acids) and lignin phenols. We isolated differently sized aliquots (6–151 µgC) of n-alkanoic acids and lignin phenols obtained from standard materials with known F14C values. Each compound class was extracted from two standard materials (one fossil, one modern) and purified using the same procedures as for natural samples of unknown F14C. There is an inverse linear relationship between the measured F14C values of the processed aliquots and their mass, which suggests constant contamination during processing of individual samples. We use Bayesian methods to fit linear regression lines between F14C and 1/mass for the fossil and modern standards. The intersection points of these lines are used to infer F14Cblank and mblank and their associated uncertainties. We estimate 4.88 ± 0.69 μgC of procedural blank with F14C of 0.714 ± 0.077 for n-alkanoic acids, and 0.90 ± 0.23 μgC of procedural blank with F14C of 0.813 ± 0.155 for lignin phenols. These F14Cblank and mblank can be used to correct AMS results of lipid and lignin samples by isotopic mass balance. This method may serve as a standardized procedure for blank assessment in small-scale radiocarbon analysis.

Leather has been produced by a variety of methods throughout human history, providing researchers unique insight into multiple facets of social and economic life in the past. Archaeologically recovered leather is often fragile and poorly preserved, leading to the use of various conservation and restoration efforts that may include the application of fats, oils, or waxes. Such additives introduce exogenous carbon to the leather, contaminating the specimen. These contaminants, in addition to those accumulated during interment, must be removed through chemical pretreatment prior to radiocarbon (14C) dating to ensure accurate dating. DirectAMS utilizes organic solvents, acid-base-acid (ABA) and gelatinization for all leather samples. Collagen yield from leather samples is variable due to the method of production and the quality of preservation. However, evaluating the acid-soluble collagen fraction, when available, provides the most accurate 14C dates for leather samples. In instances where gelatinization does not yield sufficient material, the resulting acid-insoluble fraction may be dated. Here we examine the effectiveness of the combined organic solvent and ABA pretreatment with gelatinization for leather samples, as well as the suitability of the acid-insoluble fraction for 14C dating.

Here we present direct dates of food grains and insights into agricultural strategies adopted by Harappans from a newly excavated Indus site 4MSR (Binjor) in northwestern India. The site revealed Early and Mature Harappan phases delimited by a Transitional phase based on ceramics and archaeological artifacts. The macro-botanical remains revealed that the site was occupied by an agricultural society during the Early phase (~2900−2600 BCE), whereas diversification of the economy including more craft specialization, along with an agricultural advancement was witnessed during the Mature phase (~2500−1800 BCE). The advent of summer crops during the Transitional phase (~2600−2500 BCE) indicates climate amelioration attributed to inception of strong Indian Summer Monsoon (ISM). By the end of Mature phase, millet was recorded due to a change in climatic (relatively lower moisture) conditions or drying of the river channel, which forced the settlers to shift the cropping (agricultural) strategy in the region. Plausibly, this unavailability of water during the end of Mature phase led the settlers to abandon the site in order to migrate somewhere else. The subsistence pattern indicates continuity and change in temporal domain likely owing to changing climatic/environmental conditions, resources and knowledge gained by exchange/trade of cultures over a time period between ~2900 BCE to 1800 BCE.

In 1989 an ancient burial consisting of a skeleton and a few objects was discovered at the Monte dei Cappuccini Monastery, in Torino (Italy). Anthropological analysis of the skeleton revealed that it belonged to a young man, and the archaeometric characterization of the objects suggested that most of them are compatible with the Medieval period. As a proper archeological survey was not conducted at the time of the finding, due to the religious nature of the site, a high-precision radiocarbon (14C) dating has been performed. The samples were processed with three different methods: besides the ultrafiltration (UF) treatment, we applied the “collagen” (COL) and the Longin-base (LB) methods. While UF and COL treatments provided compatible results, LB method returned ages older with respect the UF one, with significant disagreements in some cases and this evidence is supported by several measurements on the same individual. Thanks to the reduction of the uncertainty with the high number of measured samples and the availability of historical evidence, the possible age of the burial has been limited to the time interval 1464–1515 cal AD.

When dating documents by radiocarbon (14C), what we typically measure is the concentration of the support (e.g. paper, parchment, or papyrus). This can however lead to a possible misinterpretation of results because the support may be older than the writing itself. To minimize such a possible ambiguity, the ideal approach would be direct dating of the ink or color (if organic). Here we propose a feasibility study to date carbon-based black inks when deposited on papyrus, one of the most widespread writing supports used in the past. We prepared test samples, using a commercial papyrus and a homemade black ink, obtained combining modern charcoal fragments and Arabic gum. Even though the ink binder might have represented the best candidate to be dated, we verified by FTIR that the molecular composition of its soluble fraction is very similar to papyrus extractives, thus identifying the residual charcoals recovered after extraction as the most suitable material for the measurement. Enough charcoal material was extracted from the test samples and processed using our new setup optimized for microgram-size samples. The overall experimental procedure was found to be reproducible, and measured 14C concentrations were coherent with the data obtained from larger samples and raw materials.

Electron paramagnetic resonance (EPR) spectroscopy is a well-established method of dating based on trapped charges, applied to various crystalline materials, including carbonates, bones, and teeth. It provides a detailed insight into the structure of radiation defects—paramagnetic centers generated by irradiation, without the need of a painstaking sample preparation, often challenging in other methods. Using EPR we studied the effect of γ radiation on lime mortars and plasters from ancient settlement Hippos in Israel, in order to analyze the process of defect generation. Analysis of the complex spectra revealed the presence of radiation-induced species, including CO2–, NO32– and organic radical. Using an artificial UV source, we generated relatively strong signals of paramagnetic centers, analogous to those created by γ irradiation, reaching their maximum intensity after 5–6 hr of UV exposure. Our results confirm the previous reports that radiation defects can also be generated, instead of bleached, in calcite by UV radiation, which is crucial for identifying the issues related to light exposition, affecting the accuracy of age determinations in trapped-charge dating methods.

We present the current performance of the in situ radiocarbon (14C) extraction line at the University of Bern with an improved extraction and combustion system. After three major steps of improvement, the extraction of sample CO2 gas now takes place inside a platinum crucible, supported by an outer quartz-glass crucible. This setup allows us to operate the line as a closed system for several samples without breaking the vacuum. Measurements of procedural blanks and samples from our reference strewn field, Jiddat al Harasis 073, performed in our system all show a good reproducibility and, for the strewn field samples, consistency with published data. We describe each improvement step in detail, discussing the advantages and disadvantages of all tested setups. By sharing our knowledge, we aim to inform and prevent others from making the same or similar detours in establishing 14C extraction systems for extraterrestrial samples.

Verification of a groundwater flow model by radiocarbon (14C) data are presented taking into consideration the paleo-hydrogeological changes. Northeastern area of the Great Hungarian Plain was a deep-lying flat area, and its central part (Nyírség) has been uplifted in the last 15,000 years. These geological events have drastically changed the hydrogeological conditions of Nyírség. The groundwater flow system is composed of the Quaternary-Pliocene-Upper Pannonian clastic sediments. Groundwater flow modeling has been performed to define the main lateral and vertical flow directions and velocities controlling the propagation of the environmental radioactive tracer 14C. Solute-transport modeling was used to calculate the 14C activity. The recent steady-state groundwater flow velocity was reduced to a reasonable value characterizing the average flow velocity over the 15 ka simulation period using “trial and error” method. The best fit between the simulated and measured 14C data was achieved by assuming 0.4 flow velocity reduction factor. Results indicate that the present steady-state flow model with this flow velocity reduction factor is capable of reproducing the observed 14C data taking into account the effect of the significant uplift of the part of the land surface in the last 15 ka in NE Hungary.

In this paper we present data from the measurements of carbon isotopes (Δ14C and δ13C) from α-cellulose extracted from pine tree-rings. The samples were collected in four forests located in the most industrialized part of Poland, where coal mining and coal-based energy are an important branch of industry. The investigated period of time (1975–2012) covers the period of development in coal mining and other industry sectors. Stable isotope composition has been determined with using IRMS and radiocarbon concentration was determinate by AMS.

Single-year measurements of radiocarbon (14C) in tree rings have led to the discovery of rapid cosmic-ray events as well as longer lasting anomalies, which have given new insights into the Sun’s behavior in the past. Here, we present two new single-year 14C records based on Danish oak that span the periods AD 692–790 and 966–1057, respectively, and consequently include the two rapid cosmic-ray events in AD 775 and 994. The new data are presented along with relevant information on the dendrochronological dating of the wood pieces, implying that these new measurements may contribute towards generating the next international calibration curve. The new data covering the AD 966–1057 period suggest that the increase in atmospheric 14C associated with the cosmic-ray event in AD 994 actually occurred in AD 993, i.e. one year earlier than the year reported in Fogtmann-Schulz et al. (2017) based on oak from southern Denmark. Careful reanalysis of the dendrochronology that underpins the new 14C records based on oak material from southern Denmark reveals that the cosmic-ray event reported in Fogtmann-Schulz et al. (2017) actually took place in AD 993.

The early Holocene in North Africa remains a poorly known period, documented unequally by region. Eastern Algeria and Tunisia have the greatest number of deposits, but most were excavated decades ago without the controls and recording required for modern interpretation. The chronological framework is based on radiocarbon (14C) dates that are also old, for the most part. Recent work on Mesolithic lithic industries of Western Europe has enabled us to revive the hypothesis of the existence of contacts between the northern and southern shores of the western Mediterranean at least by the 6th millennium cal BC. A collective research program was conducted in 2016–2017 to test this hypothesis with a particular focus on documenting the technological traditions in the lithic industry and situating them precisely in time. We have 46 new radiocarbon dates that were recently carried out on previously excavated Algerian sites, some of which contain several levels, allowing the construction of Bayesian models. These new measures reinforce the hypothesis of contacts between Europe and Africa by demonstrating the contemporaneity of similar technological processes. Above all, they make it possible to accurately refine the chronology of the main cultural entities of the Maghreb at the beginning of the Holocene.

The increase of fossil-fuel-derived CO2 in the atmosphere has led to the dilution of the atmospheric radiocarbon concentration, but due to the costly instrumentation, the continuous atmospheric 14C/12C data is incomplete in developing countries, such as in Indonesia. These data give useful information about the level of local and regional fossil emissions. In this study, 14C AMS measurements of local vegetation and woody plant species samples have been used to estimate the rate of fossil-fuel-derived carbon in the plants, which fix the CO2 from the atmosphere by photosynthesis. Evergreen leaf samples were collected in September 2018 on the island of Bali in different, diverse districts in local and urban areas. The samples from the densely populated areas show observable fossil fuel emissions and show that the Δ14C level is close to zero ‰, similar to the natural level.

Terrestrial plant macrofossils from the sedimentary record of Lake Suigetsu, Japan, provide the only quasi-continuous direct atmospheric record of radiocarbon (14C) covering the last 50 ka cal BP (Bronk Ramsey et al. 2012). Since then, new high precision data have become available on U-Th dated speleothems from Hulu Cave China, covering the same time range (Cheng et al. 2018). In addition, an updated varve-based chronology has also been published for the 2006 core from Lake Suigetsu (SG06) based on extended microscopic analysis of the sediments and improved algorithms for interpolation (Schlolaut et al. 2018). Here we reanalyze the radiocarbon dataset from Suigetsu based on the new varve counting information and the constraints imposed by the speleothem data. This enables the new information on the calendar age scale of the Suigetsu dataset to be used in the construction of the consensus IntCal calibration curve. Comparison of the speleothem and plant macrofossil records provides insight into the mechanisms underlying the incorporation of carbon into different types of record and the relative strengths of different types of archive for calibration purposes.

There is a growing database of radiocarbon (14C) reconstructions from biogenic carbonate taken from marine sediment cores being used to investigate changing ocean circulation and carbon cycling at the end of the last great ice age. Reported here are 14C results from a marine core taken in the Makassar Straits of the western equatorial Pacific that was intended to test whether there was evidence of geologic carbon release to the ocean during the glacial termination. A thorough investigation of planktic and benthic 14C ages with stable isotopes and CT-scans revealed extensive burrowing in the upper 2 m of the core that displaced younger sediments downward by more than half a meter into the glacial section of the core. The vertical displacement is evident in both planktic and benthic fossils. However, the extent of displacement and the stratigraphic disturbance became evident only after multiple measurements of different species and genera. A CT-scan prior to sampling would be an effective screening tool to avoid sampling problem cores such as this.

Gosan-ri-type pottery (GTP) is a unique plant-fiber-tempered pottery from Korea and has only been found in Early Neolithic sites on Jeju Island. In this study, we conducted radiocarbon (14C) dating for one GTP sample and 10 charcoal samples collected from archaeological structures in which GTP was found in 2012. The measurement conditions, the internal quality assurance test, and the reliability test indicate that each 14C date is very reliable. However, the 14C dates of the charcoal samples were more accurate than that of the GTP sample due to contamination from younger humic acids. From the summary of all 14C dates of charcoal samples using the KDE model, we finally conclude that GTP was manufactured and utilized throughout the period 9610–9490 cal BP (7670–7550 BC) with 95.4% confidence level. This age corroborates the inference that GTP is the oldest known Korean Neolithic pottery.

The Middle Upper Palaeolithic (MUP) in eastern Central Europe (ECE) comprises three variants of Gravettian culture: Early Gravettian, Pavlovian, and Late Gravettian. While Early Gravettian and Pavlovian are merely located in Lower Austria and Moravia, the Late Gravettian occupations occurred over the entire territory of ECE. Compared to the number of sites the radiocarbon dating and the absolute chronology of the Late Gravettian is rather poor. The results presented here bring a new set of radiocarbon (14C) dates for the Late Gravettian period in ECE and propose that this period began and ended earlier than previously suggested.

We present new updates to the calendar and radiocarbon (14C) chronologies for the Cariaco Basin, Venezuela. Calendar ages were generated by tuning abrupt climate shifts in Cariaco Basin sediments to those in speleothems from Hulu Cave. After the original Cariaco-Hulu calendar age model was published, Hulu Cave δ18O records have been augmented with increased temporal resolution and a greater number of U/Th dates. These updated Hulu Cave records provide increased accuracy as well as precision in the final Cariaco calendar age model. The depth scale for the Ocean Drilling Program Site 1002D sediment core, the primary source of samples for 14C dating, has been corrected to account for missing sediment from a core break, eliminating age-depth anomalies that afflicted the earlier calendar age models. Individual 14C dates for the Cariaco Basin remain unchanged from previous papers, although detailed comparisons of the Cariaco calibration dataset to those from Hulu Cave and Lake Suigetsu suggest that the Cariaco marine reservoir age may have shifted systematically during the past. We describe these recent changes to the Cariaco datasets and provide the data in a comprehensive format that will facilitate use by the community.