A novel idea is presented in this paper to simulation, design, and feasibility of making a machine in order to produce nitrogen 13 (N-13) at a much lower cost than conventional medical applications. In a plasma focus device, only 0.02% of the generated ions have more than 1 MeV energy. In this paper, using a new idea we have tried to find a solution to increase the energy of deuterium ions to produce N-13. To achieve this, a series of magnetic lenses has been used to focus and guide the ions. To increase the ion energy, a small linear accelerator has been designed using a TM010 waveguide. The accelerator waveguide is also designed and optimized to have the highest impedance matching and maximum power transmission. Eventually, low-energy ions that are transmitted by magnetic lenses accelerate in the waveguide electric field and their energy increases significantly. The collision of these energetic ions with graphite target produce N-13.

Thermal imaging diagnostics was used as a surface temperature mapping tool to characterize the energy density distribution of a high-intensity pulsed ion beam. This approach was tested on the TEMP-6 accelerator (200–250 kV, 150 ns). The beam composition included carbon ions (85%) and protons, and the energy density in the focus was 5–12 J/cm2. Targets of stainless steel, titanium, brass, copper, and tungsten were examined. Our observations show that the maximum energy density measured with the thermal imaging diagnostics considerably exceeds the ablation threshold of the targets. An analysis of the overheating mechanisms of each target was carried out, including metastable overheating of the target to above its boiling temperature during rapid heating; formation, migration, and the subsequent annealing of fast radiation-induced defects in the target under ion beam irradiation. This expands the range of energy density measurement for this thermal imaging diagnostics from 2–3 J/cm2 up to 10–12 J/cm2 but introduces error into the results of measurement. For a stainless steel target, this error exceeds 15% at an energy density of more than 4 J/cm2. A method of correcting the results of the thermal imaging diagnostics is developed for a pulsed ion beam under conditions of intense ablation of the target material.

University research in the UK with high power lasers is carried out at the SERC's Central Laser Facility with a multi-terawatt neodymium glass laser, VULCAN, and a developmental KrF laser, SPRITE. These systems are briefly described together with the design of a new KrF laser to supersede VULCAN. The new laser design, SUPERSPRITE, is based on optical and Raman multiplexing which is being developed with the present SPRITE system. The specification of SUPERSPRITE is for 3.5 kJ in 1 ns and a peak power of 300 TW in short pulses. The new technology is seen as highly cost effective in relation to neodymium glass lasers. A resume of the development of XUV lasers in the UK in collaboration with laboratories overseas is given. The work is based on laser action through recombination in highly ionized ions and recent progress includes collaborative experiments on the GEKKO XII facility in Japan which have demonstrated laser action at the shortest wavelength to date at 45 A in Mg XII. The physics of energy transport in short pulses is fundamental to the extrapolation of recombination lasers to shorter wavelengths and is being studied from a more basic standpoint using both the VULCAN and SPRITE facilities. Some details of this work are given.

The work proposes a straightforward method for determining the nuclear reaction cross sections at extremely low energies (E ≃ 1–100 keV) on the basis of the measurements of the relative yield of fast particles which are products of the nuclear reactions in a target under laser compression. On the other hand, the proposed method makes it possible to find the averaged form of the ion velocity distribution function if the low-energy behaviour of the respective cross sections is known.

Plasma wakefield excited by a short TeV-scale proton beam is investigated in the highly nonlinear regime. Analysis of the “bubble” field illustrates that transverse expelling force of the wakefield can be compensated by the attractive force, which originates from the co-propagating electrons within the proton bunch, leading to a collimation effect that stabilizes the beam propagation. The protons located in the beam tail can be well-confined and accelerated forward for a long distance. Two-dimensional simulations show that after a 1-TeV proton bunch propagating through plasma for a distance, several percentages of the protons achieve a remarkable energy gain. This scheme presents a potential that proton beams from conventional accelerators may gain considerable additional energy through plasmas wakefields.

In this paper, conceptual points regarding electron elastic (Kapitza–Dirac effect) and inelastic diffraction effects on the slowed electromagnetic wave-structures/light-gratings are considered. From the unified point of view it is analyzed the main works on this subject for last four decades in chronological order, pointing out the essential peculiarity inherent in induced Cherenkov, Compton, and undulator/wiggler processes too. This review paper has also purpose to resolve confusion in scientific literature connected with the recently appeared paper Hayrapetyan et al. in 2015 regarding electron diffraction effect on a traveling wave in a dielectric medium.

This issue of Laser and Particle Beams includes papers presented at the Workshop on “Fast High Density Plasma Blocks Driven by Picosecond Terawatt Lasers” held at the University of Western Sydney, Campbelltown Campus, Australia from 1–4 December 2004.

It is my pleasure to present the Special Issue of Laser and Particle Beams devoted to the 25th anniversary of the Institute of High Current Electronics (IHCE) of the Russian Academy of Sciences Siberian Division.

In two-dimensional (2D) electron systems, the viscous flow is dominant when electron-electron collisions occur more frequently than the impurity or phonon scattering. In this work, a quantum hydrodynamic model, considering viscosity, is proposed to investigate the interaction of a charged particle moving above the two-dimensional viscous electron gas. The stopping power, perturbed electron gas density, and the spatial distribution of the velocity vector field have been theoretically analyzed and numerically calculated. The calculation results show that viscosity affects the spatial distribution and amplitude of the velocity field. The stopping power, which is an essential quantity for describing the interactions of ions with the 2D electron gas, is calculated, indicating that the incident particle will suffer less energy loss due to the weakening of the dynamic electron polarization and induced electric field in 2D electron gas with the viscosity. The values of the stopping power may be more accurate after considering the effect of viscosity. Our results may open up new possibilities to control the interaction of ions with 2D electron gas in the surface of metal or semiconductor heterostructure by variation of the viscosity.

Transient electromagnetic field plays very important roles in the evolution of high-energy-density matter or laser plasma. Now, a new design is proposed in this paper to diagnose the transient magnetic field, using relativistic electron bunch as a probe based on high-energy electron radiography. And based on this scheme, the continuous distribution of magnetic strength field can be snapshotted. For 1 mm thick quadrupole magnet model measured by 50 MeV probe electron beams, the simulation result indicates that this diagnosis has spatial resolution better than 4 microns and high measurement accuracy for strong magnetic strength and high magnetic gradient field no matter whether the magnetic interaction is focusing or defocusing for the range from -510 T∗ μm to 510 T∗ μm.