SG-III laser facility is now the largest laser driver for inertial confinement fusion research in China. The whole laser facility can deliver 180 kJ energy and 60 TW power ultraviolet laser onto target, with power balance better than 10%. We review the laser system and introduce the SG-III laser performance here.

Over the past decade the integration of ultrafast spectroscopy with nanoscience has greatly propelled the development of nanoscience, as the key information gleaned from the mechanistic studies with the assistance of ultrafast spectroscopy enables a deeper understanding of the structure–function interplay and various interactions involved in the nanosystems. This mini-review presents an overview of the recent advances achieved in our ultrafast spectroscopy laboratory that address the ultrafast dynamics and related mechanisms in several representative nanomaterial complex systems by means of femtosecond time-resolved transient absorption spectroscopy. We attempt to convey instructive, consistent information regarding the important processes, pathways, dynamics, and interactions involved in the nanomaterial complex systems, most of which exhibit excellent performance in photocatalysis.

The co-existence of the Raman and Brillouin backscattering instability is an important issue for inertial confinement fusion. The present paper presents extensive one-dimensional (1D) particle-in-cell (PIC) simulations for a wide range of parameters extending and complementing previous findings. PIC simulations show that the scenario of reflectivity evolution and saturation is very sensitive to the temperatures, intensities, size of plasma and boundary conditions employed. The Langmuir decay instability is observed for rather small $k_{epw}{\it\lambda}_{D}$ but has no influence on the saturation of Brillouin backscattering, although there is a clear correlation of Langmuir decay instability modes and ion-fractional decay for certain parameter ranges. Raman backscattering appears at any intensity and temperature but is only a transient phenomenon. In several configurations forward as well as backward Raman scattering is observed. For the intensities considered, $I{\it\lambda}_{o}^{2}$ above $10^{15}~\text{W}~{\rm\mu}\text{m}^{2}/\text{cm}^{2}$, Raman is always of bursty nature. A particular setup allows the simulation of multi-speckle aspects in which case it is found that Raman is self-limiting due to strong modifications of the distribution function. Kinetic effects are of prime importance for Raman backscattering at high temperatures. No unique scenario for the saturation of Raman scattering or Raman–Brillouin competition does exist. The main effect in the considered parameter range is pump depletion because of large Brillouin backscattering. However, in the low $k_{epw}{\it\lambda}_{D}$ regime the presence of ion-acoustic waves due to the Langmuir decay instability from the Raman created electron plasma waves can seed the ion-fractional decay and affect the Brillouin saturation.

Ionization-induced electron injection in laser wakefield accelerators, which was recently proposed to lower the laser intensity threshold for electron trapping into the wake wave, has the drawback of generating electron beams with large and continuous energy spreads, severely limiting their future applications. Complex target designs based on separating the electron trapping and acceleration stages were proposed as the only way for getting small energy-spread electron beams. Here, based on the self-truncated ionization-injection concept which requires the use of unmatched laser–plasma parameters and by using tens of TW laser pulses focused onto a gas jet of helium mixed with low concentrations of nitrogen, we demonstrate single-stage laser wakefield acceleration of multi-hundred MeV electron bunches with energy spreads of a few percent. The experimental results are verified by PIC simulations.

The laser-induced relativistic shock waves are described. The shock waves can be created directly by a high irradiance laser or indirectly by a laser acceleration of a foil that collides with a second static foil. A special case of interest is the creation of laser-induced fusion where the created alpha particles create a detonation wave. A novel application is suggested with the shock wave or the detonation wave to ignite a pre-compressed target. In particular, the deuterium–tritium fusion is considered. It is suggested that the collision of two laser accelerated foils might serve as a novel relativistic accelerator for bulk material collisions.

We present an interferometry setup and the detailed fringe analysis method for intense short pulse (SP) laser experiments. The interferometry scheme was refined through multiple campaigns to investigate the effects of pre-plasmas on energetic electrons at the Jupiter Laser Facility at Lawrence Livermore National Laboratory. The interferometer used a frequency doubled ($\unicode[STIX]{x1D706}=0.527~\unicode[STIX]{x03BC}\text{m}$) 0.5 ps long optical probe beam to measure the pre-plasma density, an invaluable parameter to better understand how varying pre-plasma conditions affect the characteristics of the energetic electrons. The hardware of the diagnostic, data analysis and example data are presented. The diagnostic setup and the analysis procedure can be employed for any other SP laser experiments and interferograms, respectively.

In this paper, the recent studies of laboratory astrophysics with strong magnetic fields in China have been reviewed. On the Shenguang-II laser facility of the National Laboratory on High-Power Lasers and Physics, a laser-driven strong magnetic field up to 200 T has been achieved. The experiment was performed to model the interaction of solar wind with dayside magnetosphere. Also the low beta plasma magnetic reconnection (MR) has been studied. Theoretically, the model has been developed to deal with the atomic structures and processes in strong magnetic field. Also the study of shock wave generation in the magnetized counter-streaming plasmas is introduced.

Heat handling has been a significant problem of the high power fiber laser systems as the output power increases rapidly. Cladding power stripper (CPS) which is used to deal with the unwanted optical power and light is required for higher cooling ability. So the methods of stripping the unwanted light attracted much attention recently, and the thermal effect is given. However, few investigations focus on the dissipation of the heat converted from the unwanted light. In this paper, an approach of active cooling for CPS is demonstrated. This is achieved by using microchannel cooling technology in heat sinking in CPS to improve the efficiency of heat exchange. In order to explain the mechanism of CPS the function of it and consistence of categories of the unwanted light are detailed firstly. Then microchannel heat sinking is proposed and verified by the heat exchange theory. At last, the design of the CPS with microchannel heat sinking is shown and following experiment is conducted. The final temperature of the device with 1000 W cladding power was demonstrated at last to verify the ability of heat distribution of the CPS component. This suggests that these CPSs can be used to stripe a thousand of watts of light in high power double cladding fiber lasers.

The interactions of strong-field few-cycle laser pulses with metastable states of noble gas atoms are examined. Metastable noble gas atoms offer a combination of low ionization potential and a relatively simple atomic structure, making them excellent targets for examining ionization dynamics in varying experimental conditions. A review of the current work performed on metastable noble gas atoms is presented.

We have developed a new radiography setup with a short-pulse laser-driven x-ray source. Using a radiography axis perpendicular to both long- and short-pulse lasers allowed optimizing the incident angle of the short-pulse laser on the x-ray source target. The setup has been tested with various x-ray source target materials and different laser wavelengths. Signal to noise ratios are presented as well as achieved spatial resolutions. The high quality of our technique is illustrated on a plasma flow radiograph obtained during a laboratory astrophysics experiment on POLARs.

High coherence of the laser is indispensable light sources in modern long or short-distance imaging systems, because the high coherence leads to coherent artifacts such as speckle that corrupt image formation. To deliver low coherence pulses in fiber amplifiers, we utilize the superluminescent pulsed light with broad bandwidth, nonlongitudinal mode structure and chaotic mode phase as the seed source of the cascaded fiber amplifiers. The influence of fiber superluminescent pulse amplification (SPA) on the limitations of the performance is analyzed. A review of our research results for SPA in the fibers are present, including the nonlinear theories of this low coherent light sources, i.e., self-focusing (SF), stimulated Raman scattering (SRS) and self-phase modulation (SPM) effects, and the experiment results of the nanosecond pulses with peak power as high as 4.8 MW and pulse energy as much as 55 mJ. To improve the brightness of SPA light in the future work, we introduce our novel evaluation term and a more reasonable criterion, which is denoted by a new parameter of brightness factor for active large mode area fiber designs. A core-doped active large pitch fiber with a core diameter of $190~\unicode[STIX]{x03BC}\text{m}$ and a mode-field diameter of $180~\unicode[STIX]{x03BC}\text{m}$ is designed by this method. The designed fiber allows near diffracted limited beam quality operation, and it can achieve 100 mJ pulse energy and 540 W average power by analyzing the mode coupling effects induced by heat.

We have developed high damage threshold filters to modify the spatial profile of a high energy laser beam. The filters are formed by laser ablation of a transmissive window. The ablation sites constitute scattering centers which can be filtered in a subsequent spatial filter. By creating the filters in dielectric materials, we see an increased laser-induced damage threshold from previous filters created using ‘metal on glass’ lithography.

The collective response of electrons in an ultrathin foil target irradiated by an ultraintense (${\sim}6\times 10^{20}~\text{W}~\text{cm}^{-2}$) laser pulse is investigated experimentally and via 3D particle-in-cell simulations. It is shown that if the target is sufficiently thin that the laser induces significant radiation pressure, but not thin enough to become relativistically transparent to the laser light, the resulting relativistic electron beam is elliptical, with the major axis of the ellipse directed along the laser polarization axis. When the target thickness is decreased such that it becomes relativistically transparent early in the interaction with the laser pulse, diffraction of the transmitted laser light occurs through a so called ‘relativistic plasma aperture’, inducing structure in the spatial-intensity profile of the beam of energetic electrons. It is shown that the electron beam profile can be modified by variation of the target thickness and degree of ellipticity in the laser polarization.

The objective of the Apollon 10 PW project is the generation of 10 PW peak power pulses of 15 fs at $1~\text{shot}~\text{min}^{-1}$. In this paper a brief update on the current status of the Apollon project is presented, followed by a more detailed presentation of our experimental and theoretical investigations of the temporal characteristics of the laser. More specifically the design considerations as well as the technological and physical limitations to achieve the intended pulse duration and contrast are discussed.

Measured highly elevated gains of proton–boron (HB11) fusion (Picciotto et al., Phys. Rev. X 4, 031030 (2014)) confirmed the exceptional avalanche reaction process (Lalousis et al., Laser Part. Beams 32, 409 (2014); Hora et al., Laser Part. Beams 33, 607 (2015)) for the combination of the non-thermal block ignition using ultrahigh intensity laser pulses of picoseconds duration. The ultrahigh acceleration above $10^{20}~\text{cm}~\text{s}^{-2}$ for plasma blocks was theoretically and numerically predicted since 1978 (Hora, Physics of Laser Driven Plasmas (Wiley, 1981), pp. 178 and 179) and measured (Sauerbrey, Phys. Plasmas 3, 4712 (1996)) in exact agreement (Hora et al., Phys. Plasmas 14, 072701 (2007)) when the dominating force was overcoming thermal processes. This is based on Maxwell’s stress tensor by the dielectric properties of plasma leading to the nonlinear (ponderomotive) force $f_{\text{NL}}$ resulting in ultra-fast expanding plasma blocks by a dielectric explosion. Combining this with measured ultrahigh magnetic fields and the avalanche process opens an option for an environmentally absolute clean and economic boron fusion power reactor. This is supported also by other experiments with very high HB11 reactions under different conditions (Labaune et al., Nature Commun. 4, 2506 (2013)).

The Z-backlighter laser facility primarily consists of two high energy, high-power laser systems. Z-Beamlet laser (ZBL) (Rambo et al., Appl. Opt. 44, 2421 (2005)) is a multi-kJ-class, nanosecond laser operating at 1054 nm which is frequency doubled to 527 nm in order to provide x-ray backlighting of high energy density events on the Z-machine. Z-Petawatt (ZPW) (Schwarz et al., J. Phys.: Conf. Ser. 112, 032020 (2008)) is a petawatt-class system operating at 1054 nm delivering up to 500 J in 500 fs for backlighting and various short-pulse laser experiments (see also Figure 10 for a facility overview). With the development of the magnetized liner inertial fusion (MagLIF) concept on the Z-machine, the primary backlighting missions of ZBL and ZPW have been adjusted accordingly. As a result, we have focused our recent efforts on increasing the output energy of ZBL from 2 to 4 kJ at 527 nm by modifying the fiber front end to now include extra bandwidth (for stimulated Brillouin scattering suppression). The MagLIF concept requires a well-defined/behaved beam for interaction with the pressurized fuel. Hence we have made great efforts to implement an adaptive optics system on ZBL and have explored the use of phase plates. We are also exploring concepts to use ZPW as a backlighter for ZBL driven MagLIF experiments. Alternatively, ZPW could be used as an additional fusion fuel pre-heater or as a temporally flexible high energy pre-pulse. All of these concepts require the ability to operate the ZPW in a nanosecond long-pulse mode, in which the beam can co-propagate with ZBL. Some of the proposed modifications are complete and most of them are well on their way.

A diode-pumped alkali laser (DPAL) provides the significant promise for high-powered performances. In this paper, a mathematical model is introduced for examination of the kinetic processes of a diode-pumped cesium vapor hollow-core photonic-crystal fiber (HC-PCF) laser, in which the cesium vapor is filled in the center hole of a photonic-bandgap fiber instead of a glass cell. The influence of deleterious processes including energy pooling, photo-ionization, and Penning ionization on the physical features of a fiber DPAL is studied in this report. It has been theoretically demonstrated that the deleterious processes cannot be ignored in a high-powered fiber-DPAL system.

A diode-pumped alkali vapor laser (DPAL) is one of the most promising candidates of the next-generation high-powered laser source. As the saturated number density of alkali vapor is highly dependent on the temperature inside a vapor cell, the temperature distribution in the cross-section of a cell will greatly affect the homogeneity of a laser medium and the output characteristics of a DPAL. In this paper, we developed an algorithm based on the regime concluding quasi-Hilbert transform to evaluate the phase aberration of a wavefront when the probe beam passes through the vapor cell placed in one arm of a Mach–Zehnder interference setup. According to the theoretical algorithm, we deduced the temperature distribution of a cesium vapor cell for different heating conditions. The study is thought to be useful for development of a high-powered laser.

We report on the temporal contrast performance of the PHELIX facility in view of the requirements imposed by solid-target interaction experiments. The requirement analysis for the nanosecond and picosecond temporal contrast is derived from empirical data and simple theoretical modeling, while the realization shows that using an ultrafast optical parametric amplifier and plasma mirrors enables meeting this specification.

We report on the observation of subcycle interferences of electron wave packets released during strong field ionization of $\text{H}_{2}$ with cycle-shaped two-color laser fields. With a reaction microscope we measure three-dimensional momentum distributions of photoelectrons correlated with either $\text{H}_{2}^{+}$ or protons within different energy ranges generated by dissociation of $\text{H}_{2}^{+}$. We refer to these different types of photoelectrons as channels. Our results show that the subcycle interference structures of electron wave packets are very sensitive to the cycle shape of the two-color laser field. We explain this behavior by the dependence of the ionization time within an optical cycle on the shape of the laser field cycle. The subcycle interference structures can be further used to obtain insight into the subcycle dynamics of molecules during strong field interaction.