To design a low radar cross section (RCS) antenna, the major concern is not only to reduce scattering, but also to maintain its radiation parameters, viz. gain, voltage standing wave ratio (VSWR), etc. This paper presents a simple configuration of low RCS microstrip patch array with a periodic structure-based superstrate. The ground of the array is designed as reduced ground plane with high impedance surface elements, viz. rectangular patch and Jerusalem cross. The configuration of superstrate consists of multilayered, viz., two-layered and three-layered structures having partially absorbing and reflecting surfaces. In both the proposed configurations, the array gain of 12.5 dB is maintained with reduced structural RCS over the entire in-band frequency range. The reflection coefficient (~ −20 dB) and VSWR (~ 1.1) of the array are maintained. It is shown that the proposed superstrate-based patch array design has significantly reduced in-band RCS (−18 dBsm) at its resonant frequency.

This paper presents a polarization-independent 11-bit chipless RFID tag based on frequency-selective surface which has been designed for encoding and relative humidity (RH) sensing applications. The 10 exterior U-shaped resonators are used for item encoding whereas Kapton has been incorporated with the interior resonator for RH sensing. This radio-frequency identification (RFID) tag operates in S- and C-frequency bands. The proposed design offers enhanced fractional bandwidth up to 88% with the density of 4.46 bits/cm2. Both single- and dual-layer tags have been investigated. The simulated results are in good agreement with measured results and a comparison with existing literature is presented to show the performance. Simple geometry, high code density, large frequency signature bandwidth, high magnitude bit, high radar cross-section, and angular stability for more than 75° are the unique outcomes of the proposed design. In addition, RH sensing has been achieved by integrating the Kapton on the same RFID tag.

This paper proposes a new radar cross section (RCS) reduced microstrip antenna incorporating 475 square slots on the patch. The proposed antenna achieves wideband RCS reduction with radiation performance sustained. The modified and reference antenna are simulated and analyzed in radiating and scattering mode, respectively. Prototypes of two antennas are fabricated and measured. Compared with the reference antenna, the simulated result shows the modified antenna RCS reduced in the frequency range 1.1–2.6 GHz, which contains the in-band and out-of-band frequency band simultaneously. And the maximum RCS reduction is 7.6dB at the frequency of 1.19GHz. Besides, the modified antenna can achieve the antenna RCS reduction in the case of oblique incidence. The prototypes of two antennas are fabricated and measured, and the accuracy of the simulation is proved by the measured result. Due to its advantages of simplicity, wideband RCS reduced, broad-angle RCS reduced, the method in this paper is suitable for wideband antenna RCS reduction in space-limited environment.

This study introduces an alternative approach to the numerical solution of two-dimensional (2D) electromagnetic scattering problems by a numerical method of moments (MoM). The real source position vector is replaced by a complex quantity, then Green's function generates a complex source point beam, therefore the interactions between the far zone elements in the impedance matrix are neglected, except the basis functions near to the edges, strongly localizing the impedance matrix. The memory storage increases with the number of edges, but for a fixed number of the edges, it is linearly proportional with N, i.e. O(N). Consequently, the overall running time can be drastically reduced and the far zone scattering pattern and the near field can be found. The proposed procedure is first explained for the single perfectly electrically conducting (PEC) strip geometry, then extended to the scattering by 2D PEC objects with closed polygonal cross-sections. Numerical results are presented for a strip and a square cylinder in both polarizations. The relative errors are also compared with the standard MoM.

A wideband and high-efficiency polarization conversion metasurface (PCM) is proposed and applied to reduce radar cross section (RCS). The proposed PCM unit is composed of two oblique asymmetry triangle split rings, which generate multiple plasmon resonances. Simulated and measured results demonstrate that it achieves polarization conversion over 90% from 9.24 to 17.64 GHz. Besides square checkerboard, the proposed PCM units and mirror units are arranged in triangle checkerboard. The mechanisms of both checkerboard PCMs are analyzed based on standard array theory, including the relationship between RCS reduction value and polarization conversion ratio value. The derived formulas provide a guideline to design checkerboard structure based on PCM. Simulated results demonstrate that both checkerboard PCMs achieve over 62% relative bandwidth of 10 dB RCS reduction under normal incidence with respect to the equal-sized metallic plate, which also means that the triangle one could be an alternative solution to reduce RCS. To verify the analyzed and simulated results, the fabricated sample and measured results of both checkerboard PCMs are presented. Good agreements are achieved between measurements, simulations and numerical analysis.

This paper presents the design of all dielectric non-absorptive phase gradient reflective surfaces that can be used to manipulate the reflected electromagnetic waves at millimeter-wave regime. Compared with a bare perfect electrical conductor reflector which obeys the classical Snell's law of reflection, the presented design can effectively alter both the shape and level of the backscattered energy and thus radar cross section (RCS) reduction is achieved in the specular direction. One- and two-dimensional phase gradient reflective dielectric surfaces of phase change about 72° across their apertures are designed and their ability to manipulate the reflected waves under normal incidence are investigated both by means of full-wave simulations and experimentally tested for validation. More than 6 dB of specular RCS reduction is achieved from about 66.5–78.2 GHz.