Researchers have long been committed to developing alternative, low-cost nanomaterials that have comparable capacity to carbon nanotubes. Halloysite nanotubes (HNTs) are naturally hollow, multi-walled, tubular structures that have high porosity, enlarged volumes and surface areas, and hydroxyl groups ready for modification. In addition, HNTs are non-toxic, biocompatible, inexpensive, abundant in nature, and easy to obtain. Magnetic nanocomposites have aroused widespread attention for their diverse potential applications in analytical fields and so magnetic halloysite nanotubes (MHNTs) have emerged as outstanding magnetic nano-adsorbent materials. Owing to their superparamagnetism, selective adsorption ability, and easy separation and surface modification, these captivating nanomaterials excel at extracting and enriching various analytes from environmental, biological, and food samples. The current review article gives an insight into recent advances in the design, functionalization, characterization, and application of MHNTs as magnetic, solid-phase extraction sorbents for separation of antibiotics, pesticides, proteins, carcinogens such as polycyclic aromatic hydrocarbons (PAHs), dyes, radioactive ions, and heavy-metal ions in complex matrices.

The use, in veterinary practice, of a three-dimensional biopolymer matrix (based on chitosan, agarose, and gelatin and doped with halloysite nanotubes) as a vehicle for mesenchymal stem cells (MSCs) to repair bone defects is reported here. The nanocomposite, combined with allogenic adipose-derived stem cells, was suitable for the repair of bone defects in dogs when paired with standard surgery involving metal Kirshner wires. The absence of inflammatory reactions to biopolymer matrices with allogenic stem cells was revealed in the case of an animal prone to inflammatory and allergic reactions. In addition, positive dynamics in the fusion of chronic bone defects without rejection reactions was observed after using a biopolymer matrix with MSCs.

Halloysite nanotubes (HNTs) have attracted much attention as delivery carriers for various drugs, but the loading of one such drug, quercetin, on HNTs has been investigated only rarely and usually involved cyclic vacuum pumping. The main objective of the present study was to develop a novel carrier system based on HNTs for quercetin delivery without a vacuum process and to investigate the effect of chemical modification of HNTs on the loading and release of quercetin. For this purpose, comparative studies of five chemical modification reagents (sodium lauroamphoacetate, cocoamidopropyl betaine, 1-hydroxyethyl 2-nonyl imidazoline betaine, triethanolamine, and dipicolinic acid) functionalized on HNTs were investigated for quercetin loading and in vitro release. Characterization of raw halloysite, modified halloysite, and quercetin-loaded halloysite were done by X-ray diffraction (XRD), Fourier-transform infrared spectrometry (FTIR), thermogravimetric analysis (TGA), and transmission electron microscopy (TEM). The results indicated that chemical modification could improve the interactions between HNTs and quercetin. After chemical modification, quercetin was anchored to both the inner and outer surfaces of HNTs by electrostatic attraction, hydrogen bonding, and van der Waals forces. Sodium lauroamphoacetate-modified HNTs were given the highest loading of 1.96 wt.% among the five reagents. Cocamidopropyl betaine-modified HNTs exhibited the best sustained-release profile with only 29.07% for initial burst release and 480 h of consecutive release. Carboxyl groups of the modification reagent improved the loading capacity of quercetin. Amide groups prolonged drug release due to the strong affinity between amine and phenolic hydroxyl groups of quercetin. The release of quercetin from the cocamidopropyl betaine-modified HNTs fitted a first-order kinetics model well. The present study suggested that cocamidopropyl betaine-modified HNTs offer promise as vehicles for delivery of quercetin and for extending the application of quercetin.

Halloysite is used for targeted delivery of drugs and other biomolecules. Renewed interest in examination by X-ray diffraction (XRD) to predict the size of particles that can be loaded onto the nanotubes has resulted. Anhydrous halloysite consists of spiraled tubules the length and diameter of which can be determined by measurement using an electron microscope. In spite of ample evidence regarding the spiral structure of halloysite, current programs to evaluate the structure of halloysite nanotubes consider it to be a hollow tube or a cylinder which prevents accurate prediction of its structure and leads to misinformation about the sizes of materials that can be loaded onto the nanotubes. The overall objective of the current study was to derive equations to estimate the structure of halloysite nanotubes which take into consideration its spiral structure. The study of Fourier transform either by electron diffraction or XRD led to the measurement of the spiral thickness and the nature of the spiral. Calculations of the nanotube dimensions may determine the ability of these carriers to allow the mechanical delivery of certain drugs. Here the structure of hydrated halloysite (hollow cylindrical tubes with a doughnut-like cross-section) and anhydrous halloysite (spiraled or helical structure) are described as previously reported in the literature. The Fourier transform of the spiraled structure was selected based on three different kinds of spirals: the Archimedean spiral, the Power spiral, and the Logarithmic spiral. Programs used to define the crystal structure of materials and to calculate the Fourier transform need to take the spiral structure into consideration.

Nine halloysite nanotubes (HNTs) have been examined using scanning electron microscopy (SEM), atomic force microscopy (AFM) and (cross-sectional) transmission electron microscopy (TEM) to evaluate details of their external and internal morphologies. The samples span morphologies within the cylindrical to prismatic-polygonal framework proposed by Hillier et al. (2016). The ‘carpet roll’ model assumed in the conceptualization of most technological applications of HNTs is shown to be far too simplistic. Both cylindrical and prismatic forms have abundant edge steps traversing their surfaces that, by analogy with plates of kaolinite, correspond to prism faces. The mean value for the diameter of the central lumen of the tubes is 12 nm. Numerous slit-like nanopores, with diameters up to 18 nm, also occur between packets of layers, particularly in prismatic forms at the junction between a central cylindrical core and outer packets of planar layers. These pores expose aluminol and siloxane surfaces, but unlike the lumen, which is assumed only to expose an aluminol surface, they do not extend along the entire length of the nanotube. Edge steps seen most clearly by AFM correspond in height to the packets of layers seen in TEM. TEM cross-sections suggest that tube growth occurs by accretion of a spiralled thickening wedge of layers evolving from cylindrical to polygonal form and reveal that planar sectors may be joined by either abrupt angular junctions or by short sections of curved layers. A more realistic model of the internal and external morphologies of HNTs is proposed to assist with understanding of the behaviour of HNTs in technological applications.

The present work describes the removal of Direct Red 81, Methyl Orange, Methylene Blue and Crystal Violet from aqueous solution using halloysite nanotubes. The clay mineral was physicochemically characterized using various methods. The influences of pH, interaction time, initial dye concentration, adsorbent amount and temperature on adsorption were monitored and interpreted. Although previous work has shown that acidic pH conditions favour the adsorption of pollutants from aqueous systems by clay materials, in this study maximum removal was possible over a wide range of pH conditions (pH ≥2–12). Adsorption was very rapid, and equilibrium was attained within 30 min. For all four dyes studied, chemical reaction seemed significant in the rate-controlling step, and the pseudo-second-order chemical reaction kinetics provided the best correlation of the experimental data. Thermodynamically, the process was spontaneous, with Gibbs energy decreasing with increasing temperature. Halloysite would be suitable for removing dyes from aqueous solution. This was further tested by using the halloysite nanotubes for the removal of complex dyes from printing and ink industry effluents.

New drug-delivery systems have remained a challenge for pharmaceutical scientists due to the use of expensive polymers and the low loading capacity of prepared nanoparticles. There is pressure to develop formulations that contain not only cheaper materials but also have controlled-release properties. Halloysite nanotubes (HNTs) are a naturally occurring clay mineral similar to kaolin, possessing a special particle shape in the form of an ultramicroscopic multilayered hollow cylinder. Its uses encompass a wide range in anticancer therapy, sustained- and controlled-release drug-delivery systems, cosmetics, delivery of proteins, vaccines and genes. These advantages are due to its biocompatibility, significant mechanical strength and natural availability. The surfaces of the tubules can be modified by coating different polymers for application in the drug-delivery system. This review is focused on the various aspects of HNTs such as structure, properties, loading methods, applications and characterizations.

Halloysite clay nanotubes are safe and biocompatible nanomaterials and their application in biomaterials is very promising. The microencapsulation of yeast cells in the shell of clay nanotubes modifying their properties was demonstrated here. Each cell was coated with a 200–300 nm-thick tube shell and this coating was not harmful for these cells’ reproduction. Synthesis of magnetic nanoparticles on the surfaces of the nanotubes allowed for magnetic-field manipulation of the coated cells, including their separation. Providing nano-designed shells for biological cells is a step forward in development of ‘cyborg’ microorganisms combining their intrinsic properties with functions added through nano-engineering.