Application of the traditional lithostratigraphic framework to subdivide theMiddle- and Upper-Quaternary locally-derived fine-grained deposits in theNetherlands is problematic. Deposits of many formations cannot bedistinguished from each other based on lithological characteristics andstratigraphie position alone. To overcome this problem, we present a new,well-defined lithostratigraphy for these deposits, based on detailedresearch in the central part of the Roer Valley Graben. This area containsan up to 35 m-thick sedimentary record of Middle- and Upper-Quaternary sand,loam and peat deposits. These have mainly been formed by aeolian andsmall-scale fluvial processes and have been preserved as a result oftectonic subsidence. The traditional lithostratigraphic subdivision of thesedeposits into three formations (Eindhoven Formation, Asten Formation andTwente Formation) was based on a combination of litho-, bio- andchronostratigraphic evidence and the presumed widespread presence of ahorizon of organic-rich interglacial sediments of Eemian age. To avoidintermingling of criteria regarding lithological characteristics, genesisand age, we now incorporate all fine-grained sediments into the new BoxtelFormation. The implications for the lithostratigraphic framework in otherparts of the country are explored and discussed. Eight lithostratigraphicmembers are introduced that describe the most characteristic parts of theformation. To fully illustrate the sedimentary sequence in the Roer ValleyGraben, two new members are defined here. The Best Member incorporatesalternating floodloam deposits and sandy aeolian deposits in the lower partof the Boxtel Formation. The Liempde Member includes reworked aeolian loessand sandy loess deposits (‘Brabant loam’) that occur in the upper part ofthe sedimentary sequence.

All Dutch rift basins that formed during Jurassic and Early Cretaceous extension have been inverted during the Late Cretaceous and Early Tertiary. Several inversion pulses occurred more or less simultaneously in all basins. Analysis of vitrinite reflectance data, in combination with fission track and fluid inclusion data show that the magnitude of uplift and erosion generally did not exceed 2 km. Inversion was strongest in the Broad Fourteens, Central Netherlands and West Netherlands basins. The direction of maximum compressive stress was generally not at right angles to the pre-existing fault trends, and resulted in transpressional movements. Within the NW-SE striking basins, dextral strike-slip movements can often be interpreted, which is consistent with a general N-S to NNW-SSE direction of maximum compression related to Alpine structural events. Where no Zechstein salt is present, trends of flower structures formed through reverse reactivation of pre-existing faults. Where the Zechstein salt is thick, re-activated faults could not breach the salt, and a broad uplift of the post-salt succession resulted, while faulting below the salt caused acceleration of halokinesis. In areas where the Zechstein salt was thin, and where the offsets of reverse faults exceeded the thickness of the salt, impressive thrusts with the Zechstein salt as detachment horizon developed. The later Tertiary inversion pulses did not affect all basins, and caused broad basin uplift in the West and Central Netherlands basins while individual faults were no longer reactivated. It appears that due to crustal thickening during the first inversion pulses the crust could become stabilised such that further compression could only be accommodated by broad basin uplift.

In northwest Europe the pattern of earthquake distribution is correlated with known Quaternary faults. Excavation of fault scarps revealed that these fault zones have been active during the Late Pleistocene. In this paper we present the results of an exploratory trenching study across the Geleen Fault, part of the Feldbiss Fault Zone, the Netherlands. Middle Saalian fluvial deposits of the Meuse, overlain by local slope deposits, were excavated. The Geleen Fault has displaced the fluvial deposits by at least 5 meters. The upper layers of local slope deposits could be correlated across the fault and were all dated at approximately 15 ka B.P. This gives the opportunity to reconstruct the sequence of events that occurred about 15 ka ago. Liquefactions provide evidence for an earthquake event. However, the main offset along the Geleen Fault is not stratigraphically related to the liquefactions. The liquefactions and the fault offset are stratigraphically separated by a period of erosion. We therefore propose a sequence of events starting with an earthquake accompanied by liquefaction, followed by a period of postseismic displacement with high rates compared to the long-term average. After this period normal displacement rates occurred, comparable to the long-term average. The duration of the period of high displacement rates could not be determined.

From 1998 to 2000, we have studied the evidence for large paleoearthquakes at the Rurrand Fault. This fault represents the eastern border of the Roer Valley Graben, which is the tectonically most active region in the Lower Rhine Embayment. The purpose of our paleoseismological studies is to enlarge the seismicity data base for this region beyond instrumental records and historical reports using indications of surface-faulting events from stratigraphie conditions at active faults. Larger time spans considered in the earthquake catalogue will enable a more reliable statistical analysis which is required for seismic hazard assessment. Based on analyses of geological data and géomorphologie investigations, detailed geophysical surveying was carried out along the southern Rurrand Fault segment for the selection of a site appropriate to paleoseismological studies. Mapping of physical parameter contrasts with seismic reflection, VES, ERT, and GPR measurements along fault-crossing profiles inferred position and near-surface structure of the fault. At the site promising the best conditions, a trench was excavated across the fault near the city of Jiilich, Germany. Within a depth of about 4 m, the Rurrand Fault was exposed in an about 50 m-wide system of faults and fault zones, affecting the stratigraphie sequence with various displacement characteristics and amounts of throw. According to heavy mineral analyses, the deposition time of most the exposed sediment strata was assigned to Pliocene and Lower Pleistocene time. These geological units are covered by loess layers deposited through so-lifluction processes during the Weichselian glacial, i.e. some tens of ka B.P., or – with lower probability – during the Saalian glacial. Several faults which had also affected the loess reflect younger fault activity. However, clear paleoseismic features were not observed in the trench, thus an unambiguous proof of the occurrence of coseismic fault displacements could not be furnished. Recently, differential subsidence due to drainage takes place in the surroundings of the nearby opencast mining. An amount of some 0.35 m, concentrated in a very narrow lateral zone, has been observed during the last 40 a at about 1 km distance from the trench position. To date, the subsidence could not be clearly located in the trench exposure. Results from geodetic levelling campaigns will help to determine the offset residuals and to gain better insight into the ruling displacement processes at the Rurrand Fault.

Using marine planation surfaces, fluvial terraces and a digital terrain model, the amount of eroded rock volume versus time for the Meuse catchment has been computed. A comparison of the amount of eroded volume with the volume of sediment preserved in the Roer Valley Rift System shows that 12% of the eroded volume is trapped in this rift. The neotectonic uplift evolution of the Ardennes is inferred from the incision history of the Meuse River system and compared to the subsidence characteristics of the Roer Valley Rift System. Both areas are characterized by an early Middle Pleistocene uplift event.

The coversands along the Peel Boundary Fault in the Netherlands were investigated by a luminescence dating approach combining Infrared Optically Stimulated Luminescence (IRSL) and Thermoluminescence (TL) methods. At the Neer trench, ten samples were collected and investigated in order to set up an independent chronological framework for the deposition history of the fluvio-aeolian and aeolian sediments and hence the timing of Late Weichselian and Holocene earthquake events. Five sedimentary units could be distinguished by this chronological approach. The oldest fluvio-aeolian unit yielded a mean deposition age of 35.9±0.4 ka and is designated to correlate with the Middle Weichselian. An IRSL age estimate of 20.1 ±2.9 ka was determined for the sediment that most likely represents the Older Coversands I, and a mean luminescence age of 15.1±1.2 ka for deposits just below the Beuningen gravel bed. The aeolian sediment from above the Beuningen horizon yielded an IRSL age estimate of 9.4±1.0 ka. The youngest deposits from the colluvial wedge yielded <6.9±0.7 ka BP, and so an earthquake event was likely to occur during the Middle or Late Holocene, as evidenced by the luminescence age estimates.

Within the Cenozoic sedimentary section of the Roer Valley Graben ten seismostratigraphic units have been identified. They are closely related to the lithological framework which makes it possible to recognize diem also on well logs in this region. The Lower Tertiary seismic units, representing mainly marine sediments, have a uniform development mat can be correlated over large distances into the German part of the Roer Valley Graben. The marine to continental Upper Tertiary and Quaternary seismic units display a more complex development due to lateral facies changes (including prograding delta systems) and rift tectonics.

The Bree Uplift is a particular structure in the direct footwall of the southwestern graben boundary fault system of the Roer Valley Graben, which has been firstly recognized at the base of the Cretaceous. To date fault activity around the Bree Uplift has been confined to the Subhercynian (late Cretaceous) inversion event or considered fading out during Tertiary times.

The revision of the existing geological data reveals that the Bree Uplift can still be recognized on the top-Tertiary map. This infers at least a late Tertiary activity, suggesting continuous fault activity in the graben boundary fault system not only on the major boundary faults but also on different splay faults, bounding individual fault blocks.

A high-resolution reflection seismic survey was carried out in 1999 over the Feldbiss fault system, the southern border of the Roer Valley graben, in Belgium. Six profile-lines with total length of 13982 m provided information on the 40-600 m depth range, covering Lower Pleistocene to Miocene strata with special emphasis on the Plio-Pleistocene Kieseloolite formation. Data quality depends on near-surface conditions and on degree of deformation in some fault zones, with better results for seismic detonator sources compared to vibroseis sources. The new data confirm the segmented character of the fault system with occurrence of fault bends, relay ramps and branching of overlapping fault sequences, testifying of the strong tectonic activity during the lower Pleistocene. Antiform structures along the Bichterweerd scarp, relaying the Feldbiss to the Geleen fault in the Meuse valley, are presented as a model for the Tertiary evolution of the Bree Uplift.

The coversands along the Bree fault escarpment, NE Belgium, were investigated by a combined dating approach including infrared optically stimulated luminescence (IRSL), thermoluminescence (TL) and radiocarbon methods. Four trenches were excavated cutting the fault scarp near the village of Bree in northeast Belgium. Altogether 17 luminescence samples and seven radiocarbon samples were investigated in order to set up a more reliable and precise chronological frame for the local coversand stratigraphy and the timing of Late Quaternary earthquake events. The chronological results indicate at least five accumulation periods for the coversand units in the area of interest. The oldest coversands were deposited during Saalian or Early Weichselian followed by coversands deposited during the Early and/or Middle Weichselian. At least three coversand units can be distinguished for the time span of the Late Weichselian to Holocene. Significant TL age underestimation of more than 20% compared to IRSL was found for samples from Trench 4. Most of the IRSL age estimates are in agreement with radiocarbon dates from the same section.

The deep subsurface temperature data of the Roer Valley Graben have been re-analysed and combined with new temperature data from hydrocarbon exploration wells. The results show that the deep subsurface temperature distribution in the Roer Valley Graben is essentially the same as in the relatively stable high bordering the Roer Valley Graben to the southwest. Thus, the Cenozoic tectonic evolution of the Roer Valley Graben, which is characterized by uplift and denudation during the Late Eocene and subsidence due to rifting starting from Late Oligocene, has hardly affected the temperatures in the graben, which is probably due to the slow subsidence and sedimentation rates. In contrast to what is suggested on previously published temperature maps, the Roer Valley Graben is probably not a relatively cold area in the Netherlands.

The late Maastrichtian to Late Paleocene seismostratigraphic record of the Roer Valley Graben provides new data on the timing and dynamics of stress changes related to the intra-plate deformation of northwestern Europe. During the deposition of late Maastrichtian to middle Danian limestones, no severe tectonic movements occurred in the southern part of the Roer Valley Graben. Around the late Danian, a known fundamental change in the European intra-plate stress field initiated an increase in subsidence of the southern part of the Roer Valley Graben. Subsidence along the graben border zone enabled relatively thick accumulations of the latest Danian to mid-Selandian siliciclastics in the intra-graben zone. Subsidence was not bounded by large offsets along faults, but rather by flexuring within and along the borders of the Roer Valley Graben. The intensity of these dynamics diminished after the middle Selandian. Most likely due to inherited intra-basinal structural differences, the northern and southern part of the Roer Valley Graben experienced distinctly different late Maastrichtian to Late Paleocene tectonics.

The original distribution pattern of Middle-Palaeolithic artefacts may be affected by tectonic movement, sedimentation and periglacial processes. This is e.g. the case in the coversand area of Limburg and Eastern Brabant (NL), where the occurrence of numerous finds in a SW-NE trending zone across the Roer Valley Graben is considered enigmatic. In order to elucidate the processes affecting the spatial distribution and the chance of recovery of such artefacts, we investigated a site in Nederweert. At this site, several Middle-Palaeolithic artefacts had been recovered earlier from unexpectedly shallow depths. A test pit profile and grain size analyses revealed that the shallow sediments at this site have been affected by intense, multi-phase cryoturbation, which has deformed the sand and loam layers and partially mixed them thoroughly. As a result, optically stimulated luminescence dating of these sediments yielded widely scattered single-aliquot equivalent dose distributions. Using a Finite Mixture Model (FMM), it was estimated that cryoturbation caused mixing of sediments deposited between 12 and 50 ka with sediment grains deposited between 60-150 ka. The latter material is probably the original context of the Middle-Paleolithic artefacts. Apparently, cryoturbation and potentially other periglacial processes have transported artefacts closer to the surface. Based on these results, we suggest that the occurrence of Middle-Palaeolithic artefacts is caused by (1) the tectonically-induced spatial distribution of layers of this age and (2) periglacial processes having caused migration of artefacts towards the surface. Although periglacial processes may facilitate finding Middle Palaeolithic artefacts, they may severely disturb the original context to such an extent that Middle Palaeolithic sites can no longer be identified. The results of this study form a basis for improving the Indicative Map of Archaeological Values that is used to predict the presence of archaeological sites. The insights gained are also relevant to other areas where Middle-Palaeolithic sites are affected by periglacial processes.