Plasmas were generated by 3 ns pulsed lasers at 1064 nm wavelength using intensities of about 1010 W/cm2 irradiating solid targets with a different composition. The ion emission was investigated with time-of-flight measurements giving information of the ion velocity, charge state generation, and ion energy distribution. Measurements use a coil to generate a magnetic field suitable to deflect ions toward a Faraday cup and/or a secondary electron multiplier.

Ion acceleration of the order of hundred eV per charge state, plasma temperature of the order of tens eV, charge states up to about 4+, and Boltzmann energy distributions were obtained in carbon, aluminum, and copper targets.

The presented results represent useful plasma characterization methods for many applications such as the new generation of laser ion sources, pulsed laser deposition techniques, and post ion acceleration systems.

Graphene micrometric particles have been embedded into polyethylene at different concentrations by using chemical–physical processes. The synthesized material was characterized in terms of mechanical and optical properties, and Raman spectroscopy. Obtained targets were irradiated by using a Nd:YAG laser at intensities of the order of 1010 W/cm2 to generate non-equilibrium plasma expanding in vacuum. The laser–matter interaction produces charge separation effects with consequent acceleration of protons and carbon ions. Plasma was characterized using time-of-flight measurements of the accelerated ions. Applications of the produced targets in order to generate carbon and proton ion beams from laser-generated plasma are presented and discussed.

A ns Nd:Yag laser, at intensity of 1010 W/cm2 is employed to generate carbon and aluminum non-equilibrium plasmas at a temperature of about 33 eV accelerating ions at energies of the order of 130 eV per charge state. The ion emission occurs manly along the normal to the target surface and can be detected using ion collectors employed in time-of-flight configuration. The application of magnetic field along the axe of the ion emission permits to focalize the ion emission enhancing the detected ion current. The formation of electron traps, due to the magnetic force lines, drives the ion acceleration improving their kinetic energy. Different applications can make use of these results to increase the flow of charged particles and their energy employing appropriate static magnetic fields, as it will be presented and discussed.

Laser generated plasmas from target normal sheath acceleration produce energetic ions from the rear side of the target due to the formation of a high directive electric field. Fast electrons are ejected from the rear side of the target and a successive Coulomb explosion is driven by the fast electrons generating a high electric field of double layer. The ion acceleration is mainly controlled by the laser intensity and by the square of the laser wavelength. Literature reports that at intensities of the order of 1018 W/cm2 and at wavelengths of about 1 µm the ion energy is of the order of 5 MeV/nucleon. The use of advanced targets realized with the aim to reduce the surface reflection, to increase the laser absorption coefficient and, with an optimal thickness, to increase the electric field of the double layer, permits to enhance the ion energy acceleration, so that the energy of 5.0 MeV per charge state can be reached at about 1016 W/cm2, as it will be presented and discussed.

Resonant absorption effects for 1.064 µm infrared laser pulse radiations are investigated by using different techniques producing micrometric surface structures with dimensions comparable to the wavelength value. The laser absorption is controlled through measurement of the Cu ion acceleration using time-of-flight approach. Surface treatments include low energy laser etching in air, deposition of microspheres obtained ablating Cu targets in water, pulse laser deposition of microstructures precursor of thin homogeneous film, chemical etching with HNO3 acid, Ar+ ion sputtering and rolling burnishing surface of thin Cu foils. Results indicate that the best resonance effect is obtained with the rolling burnishing, ion sputtering and microsphere deposition processes which enhance the Cu ion energy and the yield emission.

Proton ion acceleration via laser-generated plasma is investigated at relatively low laser pulse intensity, on the order of 1010 W/cm2. Time-of-flight technique is employed to measure the ion energy and the relative yield. An ion collector and an ion energy analyzer are used with this aim and to distinguish the number of charge states of the produced ions. The kinetic energy and the emission yield are measured through a consolidated theory, which assumes that the ion emission follows the Coulomb-Boltzmann-Shifted function. The proton stream is generated by thin and thick hydrogenated targets and it is dependent on the free electron states, which increase the laser absorption coefficient and the ion acceleration. The maximum proton energy, of about 200 eV, and the maximum proton amount can be obtained with thick metallic hydrogenated materials, such as the titanium hydrate TiH2.

Self-focusing effects, induced by ASTERIX pulsed laser at PALS Laboratory of Prague, have been investigated. Laser was employed at the third harmonics (438 nm) and intensities of the order of 1016 W/cm2. Pure Au was used as thin target and irradiated with 30° incidence angle. An ion energy analyzer was employed to detect the energy-to-mass ratio of emitted ions from plasma. Measurements were performed by changing the focal point position with a high spatial resolution step-motor. Results demonstrated that non linear processes, due to self-focusing effects, occurs when the laser beam is focused at about 200 µm in front of the target surface. In such conditions, a new ion group, having high charge state and kinetic energy, is produced because of the increment in temperature of the laser-generated plasma.

A nanosecond pulsed Nd-Yag laser, operating at an intensity of about 109 W/cm2, was employed to irradiate different metallic solid targets (Al, Cu, Ta, W, and Au) in vacuum. The measured ablation yield increases with the direct current (dc) electrical conductivity of the irradiated target. The produced plasma was characterized in terms of thermal and Coulomb interaction evaluating the ion temperature and the ion acceleration voltage developed in the non-equilibrium plasma core. The particles emission produced along the normal to the target surface was investigated measuring the neutral and the ion energy distributions and fitting the experimental data with the “Coulomb-Boltzmann-shifted” function. Results indicate that the mean energy of the distributions and the equivalent ion acceleration voltage of the non-equilibrium plasma increase with the free electron density of the irradiated element.

Laser-generated plasma is obtained in high vacuum (10−7 mbar) by irradiation of metallic targets (Al, Cu, Ta) with laser beam with intensities of the order of 1010 W/cm2. An Nd:Yag laser operating at 1064 nm wavelength, 9 ns pulse width, and 500 mJ maximum pulse energy is used. Time of flight measurements of ion emission along the direction normal to the target surface were performed with an ion collector. Measurements with and without a 0.1 Tesla magnetic field, directed along the normal to the target surface, have been taken for different target-detector distances and for increasing laser pulse intensity. Results have demonstrated that the magnetic field configuration creates an electron trap in front of the target surface along the axial direction. Electric fields inside the trap induce ion acceleration; the presence of electron bundles not only focuses the ion beam but also increases its energy, mean charge state and current. The explanation of this phenomenon can be found in the electric field modification inside the non-equilibrium plasma because of an electron bunching that increases the number of electron-ion interactions. The magnetic field, in fact, modifies the electric field due to the charge separation between the clouds of fast electrons, many of which remain trapped in the magnetic hole, and slow ions, ejected from the ablated target; moreover it increases the number of electron-ion interactions producing higher charge states.