This paper provides the methodology used to simulate and control an icosahedral tensegrity structure augmented with movable masses attached to each bar to provide a means of locomotion. The center of mass of the system can be changed by moving the masses along the length of each of the bars that compose the structure. Moving the masses changes the moments created by gravitational force, allowing for the structure to roll. With this methodology in mind, a controller was created to move the masses to the desired locations to cause such a roll. As shown later in this paper, such a methodology, assuming the movable masses have the required mass, allows for full control of the system using a quasi-static controller created specifically for this system. This system has advantages over traditional tensegrity controllers because it retains its shape and is designed for high-shock scenarios.

The flexible flat cable (FFC) assembly task is a prime challenge in electronic manufacturing. Its characteristics of being prone to deformation under external force, tiny assembly tolerance, and fragility impede the application of robotic assembly in this field. To achieve reliable and stable robotic automation assembly of FFC, an efficient assembly skill acquisition strategy is presented by combining a parallel robot skill learning algorithm with adaptive impedance control. The parallel robot skill learning algorithm is proposed to enhance the efficiency of FFC assembly skill acquisition, which reduces the risk of damaging FFC and tackles the uncertain influence resulting from deformation during the assembly process. Moreover, FFC assembly is also a complex contact-rich manipulation task. An adaptive impedance controller is designed to implement force tracking during the assembly process without precise environment information, and the stability is also analyzed based on the Lyapunov function. Experiments of FFC assembly are conducted to illustrate the efficiency of the proposed method. The experimental results demonstrate that the proposed method is robust and efficient.

Energy efficiency is inherent for autonomous robotic device. Snakes are well known for their ability to low energy consumption when swimming. However, the swimming know-how is poorly understood. Designing a snake robot inspired by snakes as a tool to find out the swimming energy efficiency crucial point will lead to the development of hyper efficient undulating locomotors. In this article, we introduce a four tendons driven continuum robot made of bio-inspired compliant vertebrae to assess the energy consumption of a planar and a spatial snake motion. The tendon-driven continuum robot constitutes the head–neck part of a locomotor snake robot. A static modeling coupled with an optimization method was implemented to generate bio-inspired motions recorded on snake swimming head. A friction model describing the friction between cables and the disks is investigated and compared to a frictionless model. The proposed prototype is equipped with exteroceptive sensors to record motion and proprioceptive sensors to measure cable forces applied at the tip of the robot. Hence, the work of the forces, thus the energy required to execute a trajectory are computed and analyzed. The energy is introduced as a key criterion to assess the swimming motion of a locomotor snake robot.

This study introduces a hybrid model that utilizes a model-based optimization method to generate training data and an artificial neural network (ANN)-based learning method to offer real-time exoskeleton support in lifting activities. For the model-based optimization method, the torque of the knee exoskeleton and the optimal lifting motion are predicted utilizing a two-dimensional (2D) human–exoskeleton model. The control points for exoskeleton motor current profiles and human joint angle profiles from cubic B-spline interpolation represent the design variables. Minimizing the square of the normalized human joint torque is considered as the cost function. Subsequently, the lifting optimization problem is tackled using a sequential quadratic programming (SQP) algorithm in sparse nonlinear optimizer (SNOPT). For the learning-based approach, the learning-based control model is trained using the general regression neural network (GRNN). The anthropometric parameters of the human subjects and lifting boundary postures are used as input parameters, while the control points for exoskeleton torque are treated as output parameters. Once trained, the learning-based control model can provide exoskeleton assistive torque in real time for lifting tasks. Two test subjects’ joint angles and ground reaction forces (GRFs) comparisons are presented between the experimental and simulation results. Furthermore, the utilization of exoskeletons significantly reduces activations of the four knee extensor and flexor muscles compared to lifting without the exoskeletons for both subjects. Overall, the learning-based control method can generate assistive torque profiles in real time and faster than the model-based optimal control approach.

Parallel manipulators with flexible morphing platform (FMP) provide potential solution in various application fields, such as shape-morphing underwater robot, deformable wings, and human–machine interfaces. However, there is still lack of effective approach for the design and analysis of such novel type of parallel manipulator. In this article, a 9-UPS redundant actuation parallel manipulator with flexible morphing moving platform is designed as a representative of this kind of manipulator. Correspondingly, a deformation estimation and shape control approach for the FMP is presented. The proposed deformation estimation approach is designed based on the bending energy, which can achieve high calculation efficiency and avoid complex mechanical definition and calculation. And the proposed shape control approach is realized by utilizing a nonrigid ICP match algorithm, which can continuously deform the morphing platform to an arbitrary target surface. A prototype of the 9-UPS parallel manipulator is fabricated and analyzed as verification. The experiment results show that the proposed approach offers a promising avenue for the deformation estimation and shape control of the morphing platform.

The widely used model predictive control of discrete-time control barrier functions (MPC-CBF) has difficulties in obstacle avoidance for unmanned ground vehicles (UGVs) in complex terrain. To address this problem, we propose adaptive dynamic control barrier functions (AD-CBF). AD-CBF is able to adaptively select an extended class of functions of CBF to optimize the feasibility and flexibility of obstacle avoidance behaviors based on the relative positions of the UGV and the obstacle, which in turn improves the obstacle avoidance speed and safety of the MPC algorithm when integrated with MPC. The algorithmic constraints of the CBF employ hierarchical density-based spatial clustering of applications with noise (HDBSCAN) for parameterization of dynamic obstacle information and unscaled Kalman filter (UKF) for trajectory prediction. Through simulations and practical experiments, we demonstrate the effectiveness of the AD-CBF-MPC algorithm in planning optimal obstacle avoidance paths in dynamic environments, overcoming the limitations of the point-by-point feasibility of MPC-CBF.

The authors seek to design a lower limb exoskeleton to augment human finned swimming; however, data associated with human finned swimming previously did not exist, particularly data that characterizes the active joint torque requirements for human-scale finned swimming motion and the corresponding thrust generation. Since these data are not directly measurable nor easily computed in human subject experiments, the authors instead employed a human-scale robotic platform to characterize the relationship between joint torque, speed, power, and thrust production during flutter kick swimming, specifically at the hip joints. Among the useful insights from this study: (1) the underwater environment can be accurately modeled as a simple viscous load as seen by the hip joints, where viscous coefficient depends on the type of fin; (2) accordingly, for a given fin, movement at any amplitude and frequency is invariant when motion is normalized by amplitude; velocity and torque by the product of amplitude and frequency; and power and thrust by the square of the product of amplitude and frequency; (3) the power-specific thrust is invariant, regardless of fin type, amplitude of motion, and frequency of motion; and 4) the phasing between right and left legs does not have a significant effect on thrust generation (i.e., kicking in-phase and kicking in opposition behave similarly). The authors hope this data will be useful to other researchers interested in developing lower limb exoskeletons to augment underwater human finned swimming.

This article presents a detailed examination of circular target localization techniques for measuring robot pose and performing online pose correction. The investigated target localization methods include centroiding, ellipse fitting with point data and gradient information, and ellipse fitting methods with augmented and corrected input data. The performance of each method is evaluated in terms of accuracy and precision of measurements through experimental comparison with a laser tracker. This study provides technical and practical insights for selecting an appropriate target localization method in robotic applications. It also introduces a vision-based solution for robot relative error correction, comprising the calibration procedure and a closed-loop control with a proportional–integral-derivative controller for pose correction. Results show enhanced accuracy in robot positioning relative to workpiece, highlighting the effectiveness of the proposed solution in robotic drilling applications.

This paper introduces a simplified matrix method for balancing forces and moments in planar parallel manipulators. The method resorts to Newton’s second law and the concept of angular momentum vector, yet it is not necessary to perform the velocity and acceleration analyses, tasks that were normally unavoidable in seminal contributions. With the introduction of natural matrices, the proposed balancing method is independent of the time and the trajectory generated by the moving links of parallel manipulators. The effectiveness of the method is exemplified by balancing two planar parallel manipulators.

Autonomous underwater vehicles (AUVs) have played a pivotal role in advancing ocean exploration and exploitation. However, traditional AUVs face limitations when executing missions at minimal or near-zero forward velocities due to the ineffectiveness of their control surfaces, considerably constraining their potential applications. To address this challenge, this paper introduces an innovative vectored thruster system based on a 3RRUR parallel manipulator tailored for micro-sized AUVs. The incorporation of a vectored thruster enhances the performance of micro-sized AUVs when operating at minimal and low forward speeds. A comprehensive exploration of the kinematics of the thrust-vectoring mechanism has been undertaken through theoretical analysis and experimental validation. The findings from theoretical analysis and experimental confirmation unequivocally affirm the feasibility of the devised thrust-vectoring mechanism. The precise control of the vector device is studied using Physics-informed Neural Network and Model Predictive Control (PINN-MPC). Through the adoption of this pioneering thrust-vectoring mechanism rooted in the 3RRUR parallel manipulator, AUVs can efficiently and effectively generate the requisite motion for thrust-vectoring propulsion, overcoming the limitations of traditional AUVs and expanding their potential applications across various domains.

The authors have studied models and control methods for legged robots without having active ankle joints that can not only walk efficiently but also stop and developed a method for generating a gait that starts from an upright stationary state and returns to the same state in one step for a simple walker with one control input. It was clarified, however, that achieving a perfect upright stationary state including zero dynamics is impossible. Based on the observation, in this paper we propose a novel robotic walker with parallel linkage legs that can return to a perfect stationary standing posture in one step while simultaneously controlling the stance-leg motion and zero-moment point (ZMP) using two control inputs. First, we introduce a model of a planar walker that consists of two eight-legged rimless wheels, a body frame, a reaction wheel, and massless rods and describe the system dynamics. Second, we consider two target control conditions; one is control of the stance-leg motion, and the other is control of the ZMP to stabilize zero dynamics. We then determine the control input based on the two conditions with the target control period derived from the linearized model and consider adding a sinusoidal control input with an offset to correct the resultant terminal state of the reaction wheel. The validity of the proposed method is investigated through numerical simulations.

The design of motion control systems for legged robots has always been a challenge. This article first proposes a motion control method for legged robots based on the gradient central pattern generator (GD-CPG). The periodic signals output from the GD-CPG neural network are used as the drive signals of each thigh joint of the legged robots, which are then converted into the driving signal of the knee and ankle joints by the thigh–knee mapping function and the knee–ankle mapping function. The proposed control algorithm is adapted to quadruped and hexapod robots. To improve the ability of legged robots to cope with complex terrains, this article further proposes the responsive gradient-CPG motion control method for legged robots. From the perspective of bionics, a biological vestibular sensory feedback mechanism is established in the control system. The mechanism adjusts the robot’s motion state in real time through the attitude angle of the body measured during the robot’s motion, to keep the robot’s body stable when it moves in rugged terrains. Compared with the traditional feedback model that only balances the body pitch, this article also adds the balancing functions of body roll and yaw to balance the legged robot’s motion from more dimensions and improve the linear motion capability. This article also introduces a differential evolutionary algorithm and designs a fitness function to adaptively optimize vestibular sensory feedback parameters. The validity, robustness, and transferability of the method are verified through simulations and physical experiments.

A fixed-time control strategy based on adaptive event-triggered communication and force estimators is proposed for a class of teleoperation systems with time-varying delays and limited bandwidth. Two force estimators are designed to estimate the operator force and environment force instead of force sensors. With the position, velocity, force estimate signals, and triggering error, an adaptive event-triggered scheme is designed, which automatically adjusts the triggering thresholds to reduce the access frequency of the communication network. With the state information transmitted at the moment of event triggering while considering the time-varying delays, a fixed-time sliding mode controller is designed to achieve the position and force tracking. The stability of the system and the convergence of tracking error within a fixed time are mathematically proved. Experimental results indicate that the control strategy can significantly reduce the information transmission, enhance the bandwidth utilization, and ensure the convergence of tracking error within a fixed time for teleoperation systems.

This paper presents a decentralized, cooperative, real-time avoidance control strategy for robotic manipulators. The proposed avoidance control law builds on the concepts of artificial potential field functions and provides tighter bounds on the minimum safe distance when compared to traditional potential-based controllers. Moreover, the proposed avoidance control law is given in analytical, continuous closed form, avoiding the use of optimization techniques and discrete algorithms, and is rigorously proven to guarantee collision avoidance at all times. Examples of planar and 3D manipulators with cylindrical links under the proposed avoidance control are given and compared with the traditional approach of modeling links and obstacles with multiple spheres. The results show that the proposed avoidance control law can achieve, in general, faster convergence, smaller tracking errors, and lower control torques than the traditional approach. Furthermore, we provide extensions of the avoidance control to robotic manipulators with bounded control torques.

Currently, there is an increasing demand for parallel mechanisms with fewer inputs and more outputs in aerospace, antennas, and recreational facilities. Therefore, this paper proposes a new parallel mechanism (PM) with a separation of constraints and drives, facilitating centralized drive management. Based on screw theory, the type synthesis of new parallel mechanisms with 3T (T representing translation), 3R (R representing revolute), 2T1R, and 2R1T is proposed. Three-degree-of-freedom (3-DOF) parallel mechanisms with fewer inputs and multiple outputs are proposed. Taking the 3RPS-PPPS parallel mechanism as an example, the closed-loop vector method is employed to solve for the lengths of actuated branches. A complete Jacobi matrix is constructed. The motion/force transmission performance of the 3RRS/PPPS parallel mechanism is better than the 3RRS parallel mechanism. Centralized management of drive branches greatly reduces the number of drives, making maintenance and repair easier. It has many application scenarios in antennas, recreational facilities, and other occasions.

This work proposes a novel grasp detection method, the Efficient Grasp Aware Network (EGA-Net), for robotic visual grasp detection. Our method obtains semantic information for grasping through feature extraction. It efficiently obtains feature channel weights related to grasping tasks through the constructed ECA-ResNet module, which can smooth the network’s learning. Meanwhile, we use concatenation to obtain low-level features with rich spatial information. Our method inputs an RGB-D image and outputs the grasp poses and their quality score. The EGA-Net is trained and tested on the Cornell and Jacquard datasets, and we achieve 98.9% and 95.8% accuracy, respectively. The proposed method only takes 24 ms for real-time performance to process an RGB-D image. Moreover, our method achieved better results in the comparison experiment. In the real-world grasp experiments, we use a 6-degree of freedom (DOF) UR-5 robotic arm to demonstrate its robust grasping of unseen objects in various scenes. We also demonstrate that our model can successfully grasp different types of objects without any processing in advance. The experiment results validate our model’s exceptional robustness and generalization.

In this study, we present a hybrid kinematic modeling approach for serial robotic manipulators, which offers improved accuracy compared to conventional methods. Our method integrates the geometric properties of the robot with ground truth data, resulting in enhanced modeling precision. The proposed forward kinematic model combines classical kinematic modeling techniques with neural networks trained on accurate ground truth data. This fusion enables us to minimize modeling errors effectively. In order to address the inverse kinematic problem, we utilize the forward hybrid model as feedback within a non-linear optimization process. Unlike previous works, our formulation incorporates the rotational component of the end effector, which is beneficial for applications involving orientation, such as inspection tasks. Furthermore, our inverse kinematic strategy can handle multiple possible solutions. Through our research, we demonstrate the effectiveness of the hybrid models as a high-accuracy kinematic modeling strategy, surpassing the performance of traditional physical models in terms of positioning accuracy.

In various industrial robotic applications, the effective traversal of a manipulator amidst obstacles and its ability to reach specific task-points are imperative for the execution of predefined tasks. In certain scenarios, the sequence in which the manipulator reaches these task-points significantly impacts the overall cycle time required for task completion. Moreover, some tasks necessitate significant force exertion at the end-effector. Therefore, establishing an optimal sequence for the task-points reached by the end-effector’s tip is crucial for enhancing robot performance, ensuring collision-free motion and maintaining high-force application at the end-effector’s tip.

To maximize the manipulator’s manipulability, which serves as a performance index for assessing its force capability, we aim to establish an optimal collision-free task sequence considering higher mechanical advantage. Three optimization criteria are considered: the cycle time, collision avoidance and the manipulability index. Optimization is accomplished using a genetic algorithm coupled with the Bump-Surface concept for collision avoidance. The effectiveness of this approach is confirmed through simulation experiments conducted in 2D and 3D environments with obstacles employing both redundant and non-redundant robots.