This special issue is associated with the 22nd International Workshop on Robotics in the Alpe-Adria-Danube Region (RAAD2013) that took place on September 11 to 13, 2013 in Portorož, Slovenia. The RAAD conference series was established in 1992 (initially under the name RAA). At that time, RAAD played an important role towards enhancing international cooperation among neighborhood countries, while addressing the evolution of robotics from classical industrial applications to novel challenging areas such as service and humanoid robotics. Although RAAD conference got its name from a geographical region (Alpe-Adria-Danube), it was never meant to be limited to participants coming solely from this region. This aspect has grown through the years and in 2013 RAAD has got 50 papers from authors who came from 20 different countries. Invited plenary lectures have been delivered by Prof. Auke Ijspeert from EPFL (Switzerland), Prof. Alin Albu-Schäffer from DLR (Germany), and prof. I-Ming Chen from Nanyang Technological University (Singapore).

In the present paper, a model of an underactuated robotic hand with tendon driven fingers is proposed. The aim of the project was to study the feasibility of building a mechanical hand with four or five fingers, the movement of which is achieved using a single linear actuator. The mechanism was first modelled in order to study the possible improvement in the ability of a “robotic hand” powered with a single actuator in regard to grasping objects with complex shapes and also in achieving a strong grip on objects. Next, a model of the finger was studied in order to optimize of its parameters. Finally, a five-fingered robotic hand was modelled for potential application as a human hand prosthesis. Our studies on the dynamic and kinematic behaviour of a single finger mechanism permitted us to make the first prototypes of the mechanism. In addition to modelling studies, we also present a prototype of the modelled robotic hand that was developed in order to optimize functionality and simplicity of construction.

On-line full body imitation with a humanoid robot standing on its own two feet requires simultaneously maintaining the balance and imitating the motion of the demonstrator. In this paper we present a method that allows real-time motion imitation while maintaining stability, based on prioritized task control. We also describe a method of modified prioritized kinematic control that constrains the imitated motion to preserve stability only when the robot would tip over, but does not alter the motions otherwise. To cope with the passive compliance of the robot, we show how to model the estimation of the center of mass of the robot using support vector machines. In the paper we give detailed description of all steps of the algorithm, essentially providing a tutorial on the implementation of kinematic stability control. We present the results on a child-sized humanoid robot called Compliant Humanoid Platform or COMAN. Our implementation shows reactive and stable on-line motion imitation of the humanoid robot.

Undulatory fin propulsion, inspired by the locomotion of aquatic species such as electric eels and cuttlefish, holds considerable potential for endowing underwater vehicles with enhanced propulsion and maneuvering abilities, to address the needs of a growing number of applications. However, there are still gaps in our understanding of the effect of the fin undulations' characteristics on the generated thrust, particularly within the context of developing propulsion control strategies for such robotic systems. Towards this end, we present the design and experimental evaluation of a robotic fin prototype, comprised of eight individually-actuated fin rays. An artificial central pattern generator (CPG) is used to produce the rays' undulatory motion pattern. Experiments are performed inside a water tank, with the robotic fin suspended from a carriage, whose motion is constrained via a linear guide. The results from a series of detailed parametric investigations reveal several important findings regarding the effect of the undulatory wave kinematics on the propulsion speed and efficiency. Based on these findings, two alternative strategies for propulsion control of the robotic fin are proposed. In the first one, the speed is varied through changes in the undulation amplitude, while the second one involves simultaneous adjustment of the undulation frequency and number of waves. These two strategies are evaluated via experiments demonstrating open-loop velocity control, as well as closed-loop position control of the prototype.

Strawberry is a very delicate fruit that requires special treatment during harvesting. A hierarchical control scheme is proposed based on a fuzzy controller for the force regulation of the gripper and proper grasping criteria, that can detect misplaced strawberries on the gripper or uneven distribution of forces. The design of the gripper and the controller are based on conducted experiments to measure the maximum gripping force and the required detachment force under a variety of detachment techniques. It is demonstrated that the hand motion for detaching the fruit from the stem has a significant role in the process because it can reduce the required force. By analysing those results a robotic gripper with pressure profile sensors is developed that demonstrates an efficiency comparable to the human hand for strawberry grasping. The designed gripper and fuzzy controller performance is tested with a considerable number of fresh fruits to demonstrate the effectiveness to the uncertainties of strawberry grasping.

This paper presents a persistent method for the identification problem of open-chained robotic systems. Based on the Projection Equation, a new, direct method to collect the dynamic and friction parameters in linear form is worked out. However, in this form, linear dependencies in the parameters occur and they are canceled out with the help of the QR algorithm. The obtained linear independent parameters are the base parameters of the system. To ensure a good excitation, the identification is improved by using optimized trajectories defined by Fourier-series, taking also physical constraints into account. The evaluation of the dynamic robot parameters is realized with a least squares error optimization. Furthermore, the result strongly depends on a special choice of weighting matrices for the error. Experimental results for a seven-axes robotic system (standard six-axes industrial manipulator mounted on a linear axis) are presented in detail. Additionally, the influence of temperature effects to base parameter changes is discussed.

This paper discusses the study of a spherical parallel manipulator (SPM) used as a haptic device for tele-operation applications. The SPM presents poor behavior in singular configurations. Redundancy is used to eliminate the parallel singularity without major changes in the mechanical structure. Comparisons in terms of kinematic and dynamic behavior between the non-redundant and redundant SPM are presented. The results prove the advantage of introducing redundancy in the actuator and sensor to improve the behavior of the SPM. A new control strategy for the redundant SPM is also proposed. The control strategy has been successfully tested and validated on a SimMechanics model.

It has become a common practice to use simulation to generate large databases of good grasps for grasp planning in robotics research. However, the existence of a generic simulation context that enables the generation of high quality grasps that can be used in several different contexts such as bin-picking or picking objects from a table, has to our knowledge not yet been discussed in the literature.

In this paper, we investigate how well the quality of grasps simulated in a commonly used “generic” context transfers to a specific context, both, in simulation and in the real world.

We generate a large database of grasp hypotheses for several objects and grippers, which we then evaluate in different dynamic simulation contexts e.g., free floating (no gravity, no obstacles), standing on a table and lying on a table.

We present a comparison on the intersection of the grasp outcome space across the different contexts and quantitatively show that to generate reliable grasp databases, it is important to use context specific simulation.

We furthermore evaluate how well a state of the art grasp database transfers from two simulated contexts to a real world context of picking an object from a table and discuss how to evaluate transferability into non-deterministic real world contexts.

This paper addresses attention to a design for a low-cost exoskeleton with fairly simple construction, lightweight, easy to wear and to adapt to human legs. The design core is focused on a cam-mechanism implementation at the ankle joint level of the leg exoskeleton. The engineering feasibility of the proposed design is characterized by numerical simulations for the design process.

Parental scaffolding is an important mechanism that speeds up infant sensorimotor development. Infants pay stronger attention to the features of the objects highlighted by parents, and their manipulation skills develop earlier than they would in isolation due to caregivers' support. Parents are known to make modifications in infant-directed actions, which are often called “motionese”7. The features that might be associated with motionese are amplification, repetition and simplification in caregivers' movements, which are often accompanied by increased social signalling. In this paper, we extend our previously developed affordances learning framework to enable our hand-arm robot equipped with a range camera to benefit from parental scaffolding and motionese. We first present our results on how parental scaffolding can be used to guide the robot learning and to modify its crude action execution to speed up the learning of complex skills. For this purpose, an interactive human caregiver-infant scenario was realized with our robotic setup. This setup allowed the caregiver's modification of the ongoing reach and grasp movement of the robot via physical interaction. This enabled the caregiver to make the robot grasp the target object, which in turn could be used by the robot to learn the grasping skill. In addition to this, we also show how parental scaffolding can be used in speeding up imitation learning. We present the details of our work that takes the robot beyond simple goal-level imitation, making it a better imitator with the help of motionese.