Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Berthe, L.
Fabbro, R.
Peyre, P.
Bartnicki, E.
and
Sollier, A.
1998.
Study of physical processes involved in laser shock processing of materials.
p.
D121.
Berthe, L
Sollier, A
Peyre, P
Fabbro, R
and
Bartnicki, E
2000.
The generation of laser shock waves in a water-confinement regime with 50 ns and 150 ns XeCl excimer laser pulses.
Journal of Physics D: Applied Physics,
Vol. 33,
Issue. 17,
p.
2142.
Peyre, P
Berthe, L
Fabbro, R
and
Sollier, A
2000.
Experimental determination by PVDF and EMV techniques of shock amplitudes induced by 0.6-3 ns laser pulses in a confined regime with water.
Journal of Physics D: Applied Physics,
Vol. 33,
Issue. 5,
p.
498.
Zhang, Wenwu
and
Yao, Y. Lawrence
2000.
Improvement of laser induced residual stress distributions via shock waves.
p.
E183.
Zhang, Wenwu
and
Yao, Y. Lawrence
2001.
Modeling and simulation improvement in laser shock processing.
p.
59.
Zhang, Wenwu
and
Lawrence Yao, Y.
2001.
Microscale Laser Shock Processing—Modeling, Testing, and Microstructure Characterization.
Journal of Manufacturing Processes,
Vol. 3,
Issue. 2,
p.
128.
Sollier, A.
Berthe, L.
and
Fabbro, R.
2001.
Numerical modeling of the transmission of breakdown plasma generated in water during laser shock processing.
The European Physical Journal Applied Physics,
Vol. 16,
Issue. 2,
p.
131.
Chen, Hongqiang
and
Lawrence Yao, Y.
2004.
Modeling Schemes, Transiency, and Strain Measurement for Microscale Laser Shock Processing.
Journal of Manufacturing Processes,
Vol. 6,
Issue. 2,
p.
155.
Kruusing, Arvi
2004.
Underwater and water-assisted laser processing: Part 1—general features, steam cleaning and shock processing.
Optics and Lasers in Engineering,
Vol. 41,
Issue. 2,
p.
307.
Ocaña, J.L.
Molpeceres, C.
Porro, J.A.
Gómez, G.
and
Morales, M.
2004.
Experimental assessment of the influence of irradiation parameters on surface deformation and residual stresses in laser shock processed metallic alloys.
Applied Surface Science,
Vol. 238,
Issue. 1-4,
p.
501.
Azer, Magdi N.
and
Scheidt, Doug
2004.
The influence of spot overlap and laser flence on the high cycle fatigue (HCF) strength of aircraft engine fan blades.
p.
1401.
Ren, Jun
Kelly, Michael
and
Hesselink, Lambertus
2005.
Laser ablation of silicon in water with nanosecond and femtosecond pulses.
Optics Letters,
Vol. 30,
Issue. 13,
p.
1740.
Bakaev, V G
Batani, D
Krasnyuk, I A
Lebo, I G
Levchenko, A O
Sychugov, G V
Tishkin, V F
Zayarnyi, D A
and
Zvorykin, V D
2005.
Hydrodynamics of high-energy GARPUN KrF laser interaction with solid and thin-film targets in ambient air.
Journal of Physics D: Applied Physics,
Vol. 38,
Issue. 12,
p.
2031.
Wu, Benxin
and
Shin, Yung C.
2006.
Laser pulse transmission through the water breakdown plasma in laser shock peening.
Applied Physics Letters,
Vol. 88,
Issue. 4,
Wu, Benxin
and
Shin, Yung C.
2007.
From Incident Laser Pulse to Residual Stress: A Complete and Self-Closed Model for Laser Shock Peening.
Journal of Manufacturing Science and Engineering,
Vol. 129,
Issue. 1,
p.
117.
Pakhal, H.R.
Lucht, R.P.
and
Laurendeau, N.M.
2008.
Spectral measurements of incipient plasma temperature and electron number density during laser ablation of aluminum in air.
Applied Physics B,
Vol. 90,
Issue. 1,
p.
15.
2008.
Handbook of Liquids-Assisted Laser Processing.
p.
387.
Ye, Chang
and
Cheng, Gary J.
2010.
Effects of Temperature on Laser Shock Induced Plastic Deformation: The Case of Copper.
Journal of Manufacturing Science and Engineering,
Vol. 132,
Issue. 6,
Gladush, Gennady G.
and
Smurov, Igor
2011.
Physics of Laser Materials Processing.
Vol. 146,
Issue. ,
p.
379.
Liao, Yiliang
Yang, Yingling
and
Cheng, Gary J.
2012.
Enhanced Laser Shock by an Active Liquid Confinement—Hydrogen Peroxide.
Journal of Manufacturing Science and Engineering,
Vol. 134,
Issue. 3,