This investigation describes the mechanical configuration and control environment for a novel cart-seesaw system. This mechanism is called a super articulated mechanical system (SAMS). The system comprises a cart that slides on the pneumatic rodless cylinder. The rodless cylinder is double-acting with the carrier bracket, on which a cart is a pinion mechanism for the tracks. The cart-seesaw system brings the cart from any initial position to a desired position on the seesaw by applying an appropriate force to the cart and thus adjusting the angle of the seesaw. The position of a cart denotes the first degree of freedom, which is activated by a pneumatic proportional valve, and the angle of the seesaw indicates the second degree of freedom that is not actuated. Consequently, the proposed new pneumatic cart-seesaw system is straightforward to construct and direct to operate in different scenarios of performance. A state feedback controller is applied for stabilization of the equilibrium point of the system. Moreover, this study adds a supervisory controller that takes control action in extreme situations. Test results reveal excellent properties in control performance. The proposed product can be extensively applied in SAMS and pneumatic control for robotics control laboratory.

This paper proposes a method for task based design of modular serial robotic arms using evolutionary algorithms (EA). We introduce a 3D kinematics and a global optimization for both topology and configuration from task specifications. The search features revolute as well as prismatic joints and any number of DOF to build up a solution without using any design knowledge. A study of the evolution dynamics gives some keys to set evolution parameters that enable artificial evolution. An adapted algorithm dealing with the topology/configuration search tradeoff is proposed, descibed, and discussed. Illustrations of the algorithms results are given and conclusions are drawn from their analysis. Perspectives of this work are given, extending its reach to control and complex system design.

In this paper, we design a position/force controller for cooperative robots during constrained motion. The proposed scheme is based on the knowledge of the manipulator dynamics and does not require measurements of link velocity or end-effector contact forces. A well-known velocity observer and the design of a force observer are used. The validity of the proposed method is verified by means of experimental results.

This paper is concerned with algorithmic techniques for the incremental generation of continuous curves that can efficiently cover an abstract surface. We introduce the notion of low-discrepancy curves as an extension of the notion of low-discrepancy sequences—such that sufficiently smooth curves with low-discrepancy properties can be defined and generated. We then devise a procedure for lifting these curves, that efficiently cover the unit cube, to abstract surfaces, such as nonlinear manifolds. We present algorithms that yield suitable fair mappings between the unit cube and the abstract surface. We demonstrate the application of these ideas using some concrete examples of interest in robotics.

Three-dimensional (3D) enveloping grasps for dexterous robotic hands possess several advantages over other types of grasps. This paper describes a new method for kinematic 3D enveloping grasp planning. A new idea for grading the 3D grasp search domain for a given object is proposed. The grading method analyzes the curvature pattern and effective diameter of the object, and grades object regions according to their suitability for grasping. A new approach is also proposed for modeling the fingers of the dexterous hand. The grasp planning method is demonstrated for a three-fingered, six degrees-of-freedom, dexterous hand and several 3D objects containing both convex and concave surface patches. Human-like high-quality grasps are generated in less than 20 s per object.

In this paper, a novel algorithm is formulated and implemented for optimum path planning of parallel manipulators. A multi-objective optimisation problem has been formulated for an efficient numerical solution procedure through kinematic and dynamic features of manipulator operation. Computational economy has been obtained by properly using a genetic algorithm to search an optimal solution for path spline-functions. Numerical characteristics of the numerical solving procedure have been outlined through a numerical example applied to Cassino Parallel Manipulator (CaPaMan) both for path planning and design purposes.

A humanoid robot should be able to keep balance even in the presence of disturbing forces. Studies of human body reaction patterns to sudden external forces (impacts) are useful for developing balance control strategies. In this paper, we show how to implement two such reaction patterns, called ankle and hip strategy, using a small humanoid robot. Simple dynamical models in the sagittal plane are employed. The decision for invoking one of the reaction patterns is based on acceleration data measured during the impact. The experiments confirm that the robot is able to react swiftly, similar to a human.

This paper is organized in two parts. In Part I, the wrench polytope concept is presented and wrench performance indices are introduced for planar parallel manipulators (PPMs). In Part II, the concept of wrench capabilities is extended to redundant manipulators and the wrench workspace of different PPMs is analyzed. The end-effector of a PPM is subject to the interaction of forces and moments. Wrench capabilities represent the maximum forces and moments that can be applied or sustained by the manipulator. The wrench capabilities of PPMs are determined by a linear mapping of the actuator output capabilities from the joint space to the task space. The analysis is based upon properly adjusting the actuator outputs to their extreme capabilities. The linear mapping results in a wrench polytope. It is shown that for non-redundant PPMs, one actuator output capability constrains the maximum wrench that can be applied (or sustained) with a plane in the wrench space yielding a facet of the polytope. Herein, the determination of wrench performance indices is presented without the expensive task of generating polytopes. Six study cases are presented and performance indices are derived for each study case.

Global localization of mobile robots has been well studied using the extended Kalman filter (EKF) method. This paper presents a fuzzy extended information filtering (FEIF) approach to improving global localization of an indoor autonomous mobile robot with ultrasonic and laser scanning measurements. A real-time FEIF algorithm is proposed to improve accuracy of static global pose estimation via multiple ultrasonic data. By fusing odometric, ultrasonic, and laser scanning data, a real-time FEIF-based pose tracking algorithm is developed to improve accuracy of the robot's continuous poses. Several experimental results are performed to confirm the efficacy of the proposed methods.

This work presents, first, a complete dynamic model of a unicycle-like mobile robot that takes part in a multi-robot formation. A linear parameterization of this model is performed in order to identify the model parameters. Then, the robot model is input-output feedback linearized. On a second stage, for the multi-robot system, a model is obtained by arranging into a single equation all the feedback linearized robot models. This multi-robot model is expressed in terms of formation states by applying a coordinate transformation. The inverse dynamics technique is then applied to design a formation control. The controller can be applied both to positioning and to tracking desired robot formations. The formation control can be centralized or decentralized and scalable to any number of robots. A strategy for rigid formation obstacle avoidance is also proposed. Experimental results validate the control system design.

This paper addresses the dynamic simulation and control of structural vibrations of a 3-PRR parallel manipulator with three flexible intermediate links, to which are bonded lead zirconate titanate (PZT) actuators and sensors. Flexible intermediate links are modelled as Euler–Bernoulli beams with pinned-pinned boundary conditions. A PZT actuator controller is designed based on strain rate feedback (SRF) control. Control moments from PZT actuators are transformed to force vectors in modal space and are incorporated in the dynamic model of the manipulator. The dynamic equations are developed based on the assumed mode method for the flexible parallel manipulator with multiple PZT actuator and sensor patches. Numerical simulation is performed and the results indicate that the proposed active vibration control strategy is effective. Spectral analyses of structural vibrations further illustrate that deformations from structural vibration of flexible links are suppressed to a significant extent when the proposed vibration control strategy is employed, while the deflections caused by inertial and coupling forces are not reduced.

Existing penalty-based haptic rendering approaches are based on the penetration depth estimation in strictly translational sense and cannot properly take object rotation into account. We propose a new six-degree-of-freedom (6-DOF) haptic rendering algorithm which is based on determining the closest-point projection of the inadmissible configuration onto the set of admissible configurations. Energy is used to define a metric on the configuration space. Once the projection is found the 6-DOF wrench can be computed from the generalized penetration depth. The space is locally represented with exponential coordinates to make the algorithm more efficient. Examples compare the proposed algorithm with the existing approaches and show its advantages.

This part of the paper investigates the wrench capabilities of redundantly actuated planar parallel manipulators (PPMs). The wrench capabilities of PPMs are determined by mapping a hypercube from the torque space into a polytope in the wrench space. For redundant PPMs, one actuator output capability constrains the wrench space with a smaller polytope that is contained inside the overall polytope. Performance indices are derived from six study cases. These indices are employed to analyze the wrench workspace for constant orientation of the mobile platform of the non-redundant 3-RRR PPM, and actuation redundant 4-RRR and 3-RRR PPMs, where the underline indicates the actuated joints. A comparison of the results shows that both of the redundantly-actuated PPMs give better wrench capabilities than the non-redundant PPM. However, it is shown that scaled for the operational cost (wrench capabilities divided by total actuation output) the non-redundant 3-RRR PPM provides the highest maximum reachable force, the 3-RRR PPM produces the highest isotropic force, and the 4-RRR yields the highest reachable moment.

This paper addresses the dynamic dexterity of a planar 2-degree of freedom (DOF) parallel manipulator with virtual constraint. Without simplification, the dynamic formulation is derived by using the virtual work principle. The condition number of the inertia matrix of the dynamic equation is presented as a criterion to evaluate the dynamic dexterity of a manipulator. In order to obtain the best isotropic configuration of the dynamic dexterity in the whole workspace, two global performance indices, which consider the mean value and standard deviation of the condition number of the inertia matrix, respectively, are proposed as the objective function. For a given set of geometrical and inertial parameters, the dynamic dexterity of the parallel manipulator is more isotropic in the center than at the boundaries of the workspace.

In this paper, a geometrical approach is developed to generate simultaneously optimal (or near-optimal) smooth paths for a set of non-holonomic robots, moving only forward in a 2D environment cluttered with static and moving obstacles. The robots environment is represented by a 3D geometric entity called Bump-Surface, which is embedded in a 4D Euclidean space. The multi-motion planning problem (MMPP) is resolved by simultaneously finding the paths for the set of robots represented by monoparametric smooth C2 curves onto the Bump-Surface, such that their inverse images onto the initial 2D workspace satisfy the optimization motion-planning criteria and constraints. The MMPP is expressed as an optimization problem, which is solved on the Bump-Surface using a genetic algorithm. The performance of the proposed approach is tested through a considerable number of simulated 2D dynamic environments with car-like robots.

This paper describes a hybrid approach to a fast and accurate localization method for legged robots based on Fuzzy-Markov (FM) and Extended Kalman Filters (EKF). Both FM and EKF techniques have been used in robot localization and exhibit different characteristics in terms of processing time, convergence, and accuracy. We propose a Fuzzy-Markov–Kalman (FM–EKF) localization method as a combined solution for a poor predictable platform such as Sony Aibo walking robots. The experimental results show the performance of EKF, FM, and FM-EKF in a localization task with simple movements, combined behaviors, and kidnapped situations. An overhead tracking system was adopted to provide a ground truth to verify the performance of the proposed method.

This paper addresses the problem of contact force control for multiple contacts distributed over multiple links in a robot. This is of importance when performing complex tasks in unstructured environment, particularly in humanoid robot applications. The proposed multicontact control framework provides a new way of defining the operational space coordinates, which facilitates the specification of multiple contact control. The contact force space on multiple links is constructed as an operational space for the highest priority task. Motion control, given lower priority, can be executed using the rest of degree of freedom within the null-space of the force control. The dynamic control structure, then, provides a means to control each contact force and motion independently. This dynamic decoupling enables each contact force controller to utilize linear control theories. In particular, the contact force controllers adopt full state feedback control and estimation methods to produce robust performance with respect to modeling and parameter uncertainties. The effectiveness of the multiple contact control framework was demonstrated using a PUMA560 manipulator, with multiple contacts on the end-effector and third link. The demonstrated tasks involved controlling each of the contact forces with null-space motion.

Deformable models have been studied in image analysis over the last decade and used for recognition of flexible or rigid templates under diverse viewing conditions. This article addresses the question of how to define a deformable model for a real-time color vision system for mobile robot navigation. Instead of receiving the detailed model definition from the user, the algorithm extracts and learns the information from each object automatically. How well a model represents the template that exists in the image is measured by an energy function. Its minimum corresponds to the model that best fits with the image and it is found by a genetic algorithm that handles the model deformation. At a later stage, if there is symbolic information inside the object, it is extracted and interpreted using a neural network. The resulting perception module has been integrated successfully in a complex navigation system. Various experimental results in real environments are presented in this article, showing the effectiveness and capacity of the system.

Two distributed stochastic search algorithms are proposed for motion planning of multi-robot systems: (i) distributed gradient, (ii) swarm intelligence theory. Distributed gradient consists of multiple stochastic search algorithms that start from different points in the solutions space and interact with each other while moving toward the goal position. Swarm intelligence theory is a derivative-free approach to the problem of multi-robot cooperation which works by searching iteratively in regions defined by each robot's best previous move and the best previous move of its neighbors. The performance of both approaches is evaluated through simulation tests.

Due to the existence of singular configurations within the workspace for a platform- type parallel manipulator (PPM), the actuating force demands increase drastically as the PPM approaches or crosses singular points. Therefore, in this report, a numerical technique is presented to plan a singularity-free trajectory of the PPM for minimum actuating effort and reactions. By using the parametric trajectory representation, the singularity-free trajectory planning problem can be cast to the determination of undetermined control points, after which a particle swarm optimization algorithm is employed to find the optimal control points. This algorithm ensures that the obtained trajectories can avoid singular points within the workspace and that the PPM has the minimum actuating effort and reactions. Simulations and discussions are presented to demonstrate the effectiveness of the algorithm.