It was reported that about 10% of people suffer from painful knee arthritis, and a quarter of them were severely disabled. The core activities of daily living were severely limited by knee osteoarthritis (KOA). In order to reduce knee pain and prolong the life of the knee joint, there has been an increasing demand on the development of exoskeletons, for prevention and treatment. The course of KOA was closely related to the biomechanics of knee joint, and the pathogenesis was summarized based on the biomechanics of knee joint. For the prevention and clinical treatment, exoskeletons are classified into three categories: prevention, treatment, and rehabilitation after the operation. Furthermore, the design concepts, actuators, sensors, control strategies, and evaluation criteria were presented. Finally, the shortcomings and limitations were summarized. It is useful for researchers to develop suitable exoskeletons in the future.

Double inverted pendulum model, stationary or on a cart, is computationally the simplest out of the range of reasonable models used for anthropomorphic robots motion synthesis. However, it is still not sufficient for describing more complex situations. The novel concept of variable double inverted pendulum (VDIP) for static postures and VDIP on cart (VDIPC) for dynamic cases is proposed. It provides a simplified but a sufficiently accurate tool for planning the human-like static and dynamic robot postures. Its variable parameters enable the description of both human static postures and motion dynamics. The variable length of the lower link is essential for the representation of postures attained by bending legs. The studies of a set of static and dynamic postures were used for deducing and verifying the locations of lower and upper joint of a double pendulum and the point masses. To justify the concept, human body and pendulum behaviors are compared taking into account a typical model of the human body. Static analysis was conducted by considering static human postures. Dynamic conditions were analyzed using the data acquired from human motion and thus the VDIPC definition was established. The zero moment point trajectories of the human and of VDIPC were compared, validating the correctness of VDIPC in dynamic situations. The formal description of VDIPC is provided together with the torques equilibrium condition needed for evaluating the dynamic postural stability, with the VDPIC representing the robot configuration. The VDPIC state equations are formulated in a form required by the predictive control method. The paper contributes to the motion synthesis methods of anthropomorphic robots taking into account postural control.

Prandtl–Ishlinskii (PI) model has an excellent compromise to characterize an asymmetric saturated hysteresis behavior of shape-memory-alloy (SMA)-driven systems, but it cannot consider thermomechanical relations between components of SMA-driven systems. On the other hand, constitutive models are composed of these relations, but their precision needs to be improved. In this paper, PI model is proposed to boost constitutive models in two cases. In the first case, PI model is used to characterize martensite volume fraction (MVF) called hybrid model. In the second case, the model is applied as a regulator in the output of a constitutive model called PI-based output (PIO) regulator. Due to simplicity and ability of Liang–Rogers (LR) model in transformation phases, it is considered as an MVF in the original constitutive model. The performance of both proposed models is compared with the original LR-based constitutive model. Unknown parameters of all three models are identified using genetic algorithm in MATLAB Toolbox. The performance of the three models is investigated at three different frequencies of \[\frac{{2\pi }}{8}\], \[\frac{{2\pi }}{{15}}\], and \[\frac{{2\pi }}{{30}}\] Hz because the excitation frequency changes the hysteresis behavior. Results show that the proposed hybrid model keeps the precision of the original constitutive model at different frequencies. In addition, the proposed PIO model shows the best performance to predict hysteresis behavior at different frequencies.

This paper proposes a fully distributed continuous region-reaching controller for multi-robot systems which can effectively eliminate the chattering issues and the negative effects caused by discontinuities. The adaptive control gain technique is employed to solve the distributed region-reaching control problem. By performing Lyapunov function-based stability analysis, it is shown that all the robots can move cohesively within the desired region under the proposed distributed control algorithm. In addition, collision avoidance and velocity matching within the moving region can be guaranteed under properly designed control gains. Simulation examples are given to verify the capabilities of the proposed control method.

Cable is the most important bearing structure of the cable-stayed bridges. Its safety has been of crucial public concern. Traditional manual cable inspection method has many defects such as low inspection efficiency, poor reliability and hazardous working environment. In this paper, a new wirelessly controlled cable-climbing robot enabling safe and convenient inspection of stay cables is proposed. The designed robot is composed of two modules, joined by four turnbuckles to form a closed structure that clasps the cable. The robot is controlled wirelessly by a ground-based station, and a DC power is supplied via an onboard lithium battery. The climbing principle and mechanical structure of this robot are introduced. The static model of the robot during obstacle negotiation is established. The relationships of the driving force and resistance with obstacle height to determine the obstacle-negotiation capability of the robot are obtained. The effects of cable diameter, cable inclination and preload force on obstacle climbing ability of the robot are also analyzed. The experiments verify that the robot could climb random inclined cables and overcome an obstacle of 2.42 mm in height with a mass of 5 kg payload.

In this paper, an integrated mathematical model for the balancing and sequencing problems of a mixed-model assembly line (MMAL) is developed. The proposed model minimizes the total overload and idleness times. For the sake of reality, the impact of operator’s learning and fatigue issues on the optimization of the assembly line balancing and sequencing problems is considered. Furthermore, it is assumed that the Japanese mechanism is used in this assembly line to deal with the overload issue. With respect to the complexity level of the proposed model, a genetic algorithm is developed to solve the model. In order to set the parameters of the developed genetic algorithm, the well-known Taguchi method is used and the efficiency of this solution method is compared with the GAMS software using several test problems with different sizes. Finally, the sensitivity of the balancing and sequencing problems to the parameters such as station length, learning rate, and fatigue rate are analyzed and the impact of changing these parameters on the model is studied.

This paper addresses robust stability and position tracking problems in teleoperation systems subject to varying delay in the communication medium, uncertainties in the models of manipulators, and non-passive interaction forces in the terminations. Fixed-structure nonlinear control law is developed based on the notion of Interconnection and Damping Assignment Passivity-Based Control (IDA-PBC) scheme. Then, utilizing the Lyapunov–Krasovskii theorem, sufficient conditions are derived in terms of Linear Matrix Inequalities (LMIs) to tune the controller parameters. Differently from literature, the objectives are achieved without requirement for any passive parts in the model of interaction forces. Comparative simulations and experimental results demonstrate the applicability and superiority of the proposed method.

We have introduced a new low-Reynolds-number microrobot with high 3D maneuverability. Our novel proposed microrobot has a higher rank of the controllability matrix with respect to the previous microswimmers which makes it capable of performing complex motions in space. In this study, governing equations of the microswimmer’s motion have been derived and simulated. Subsequently, we have proposed a cascade optimal control technique to control the swimmer trajectory. In the proposed control scheme, the actuation is provided in a way that an exponential stability on the system trajectory error as well as minimum fluctuations of control signals are achieved.

A novel 3-R(RRR)R+R (R as revolute joint) hybrid antenna mechanism (HAM) is proposed for noncircular polarized antenna. First, its mobility characteristic is analyzed. Besides, its kinematics is deduced, and the velocity and acceleration are obtained. Afterward, its dynamic model is established. The actuation torques of each actuation joint are obtained. Its actuation torques are verified by mathematical model analysis and dynamic simulation. Furthermore, its workspace is also presented. Finally, the motion characteristics experimental results show that the 3-R(RRR)R+R HAM can carry out the azimuth and pitch motion. This research work serves as a fundamental theoretical basis for its further application.

This paper presents the detailed dynamic modeling of a quadruped robot. The forward and inverse kinematic analysis of each leg of the proposed model is deduced using Denavit-Hartenberg (D-H) parameters. It desires to calculate the optimal feet forces of the quadruped robot’s joint torque, which is essential for its online control. To find out the optimal feet force distribution, two approaches are implemented to fulfill the locomotion objective. The four-legged quadruped robot and torso body’s detailed dynamics are modeled to generate an equation of motion for the robot control system. The Euler–Langrage theory has been used to find out the joint motion. The computer simulation results are presented to verify the effectiveness of the dynamic model.

In this paper, a new hybrid fault-tolerant control (FTC) strategy based on nonsingular fast integral-type terminal sliding mode (NFITSM) and time delay estimation (TDE) is proposed for a Schönflies parallel manipulator. In order to detect, isolate, and accommodate actuator faults, TDE is used as an online fault estimation algorithm. Stability analysis of the closed-loop system is performed using Lyapunov theory. The proposed controller performance is compared with conventional sliding mode and feedback linearization control methods. The obtained results reveal the superiority of the proposed FTC based on TDE and NFITSM.