Hostname: page-component-78c5997874-mlc7c Total loading time: 0 Render date: 2024-11-02T20:28:46.724Z Has data issue: false hasContentIssue false
  • English
  • Français

Development of a new buffing robot manipulator for shoes

Published online by Cambridge University Press:  01 January 2008

Hyeung-Sik Choi ,
Gyu-Deuk Hwang  and
Sam-Sang You
Hyeung-Sik Choi*
Affiliation:
Division of Mechanicl and Information Engineering, Underwater Vehicle Research Center, Korea Maritime University, Dongsam-Dong, Yeongdo-Ku, Pusan, Korea.
Gyu-Deuk Hwang
Affiliation:
Division of Mechanicl and Information Engineering, Underwater Vehicle Research Center, Korea Maritime University, Dongsam-Dong, Yeongdo-Ku, Pusan, Korea.
Sam-Sang You
Affiliation:
Division of Mechanicl and Information Engineering, Underwater Vehicle Research Center, Korea Maritime University, Dongsam-Dong, Yeongdo-Ku, Pusan, Korea.
*
*Corresponding author. E-mail: [email protected]
Get access Rights & Permissions [Opens in a new window]

Summary

This paper presents analysis and experimental verifications of a new robot manipulator with five degrees of freedom developed for the buffing operation of shoes. First, the forward and inverse kinematics are analyzed. Next, an analytic closed-form solution is rigorously derived for the joint angles corresponding to the position and orientation of the end-effector in Cartesian coordinates. A control system, including input/output interfaces and the related electronic system, is designed for the control of the mechanical structure of the buffing robot. Then, peripheral systems integrated with the conveyer, transfer device, and fixture device are designed for the sequential buffing process of shoes. Also, a graphic user interface (GUI) program including the forward/inverse kinematics, control algorithm, and communication program to interact the robot with the peripheral systems is developed by using visual C++ language. A new flexible toolholder (FTH) is proposed to compensate for the excessive applied force between deburring tools and shoes. Finally, the test results are provided to demonstrate the effectiveness of the proposed scheme.

Keywords

Robot manipulatorBuffingShoe uppersKinematicsControl systemFlexible toolholder
Type
Article
Information
Robotica , Volume 26 , Issue 1 , January 2008 , pp. 55 - 62
Copyright
Copyright © Cambridge University Press 2007

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Spencer, J. E., “Robotics technology and the advent of agile manufacturing systems in the footwear industry and robot manipulators,” Assem. Autom. 16 (3), 10–15 (1996).CrossRefGoogle Scholar
2.Rooks, B. W., “Robots bring automation to shoe production,” Assem. Autom. 16 (3), 22–25 (1996).Google Scholar
3.Botema, O. and Roth, B., Theoretical Kinematics (North Holland, Amsterdam, The Netherland, 1979).Google Scholar
4.Colson, J. C. and Perreira, N. D., “Kinematic Arrangements Used in Industrial Robots,” Proceedings of the 13th International Symposium on Industrial Robots, (1983), pp. 540–544.Google Scholar
5.Todorov, T. S., “Synthesis of four-bar mechanism by Freudenstein–Chebyshev,” Mech. Mach. Theory 37, 1505–1512 (June 2002).CrossRefGoogle Scholar
6.Spong, M. W. and Vidyasagar, M., Robot Dynamics and Control (Wiley, Hoboken, NJ, 1989).Google Scholar