An X-Ray powder diffraction study of ultra-dispersed polytetrafluoroethylene was carried out. As well as a regular polytetrafluoroethylene the ultra-dispersed form contents a high proportion of the crystalline phase. The X-ray diffraction pattern could be described with two-dimensional hexagonal unit cell [a=5.685(1) Å, symmetry group p6mm]. Structural modeling with a continuous electron density approach as well as with a discrete disordered atoms distribution was accomplished. The model was refined using the Rietveld method. The structure is characterized by a spiral arrangement of polymers (CF2-)n along the z-axis with complete mutual disordering by rotational displacement around z, as well as a partial molecular translation along the z-axis. Molecular disordering results in a systematic absence of reflections with 1≠0 and as a sequence in two-dimensional unit cell effect. The presence of complete rotational disordering distinguishes the ultra-dispersed form of polytetrafluoroethylene from the standard one (fluoroplast-4), where only partial disordering is observed.

New ternary compounds of Ca14Al10Zn6O35 and Ca3Al4ZnO10 compositions have been synthesized in the CaO–Al2O3–ZnO system. Single crystals of the new compounds have been grown, and crystal structures and crystallochemical properties were established. The phenomenon of heterovalence isomorphous statistical substitution of aluminium for zinc in alumino-oxygen tetrahedra has been established. It is now possible to synthesize a large group of new ternary compounds, the compositions of which are similar to that of spinels. The structure and properties of the new phases are presented.© 1997 International Center for Diffraction Data.

Although there is mounting interest in the measurement of stresses in composite materials after fabrication and/or use, few measurements to date have not taken into account the three dimensional nature of the stress system in such materials. Most data give only the net stress, that is, the difference between principal stresses. A procedure for a more complete measurement (in a reasonable time) is developed here, including the separation of macrostresses and microstresses. If time does not permit a full investigation, measurements of the lattice parameters of the component phases provide a simple way to sample the hydrostatic component due to differential thermal contraction. The Barrett-Predecki method of adding filler is particularly promising for stress measurements in those composites whose component phases do not give appropriate diffraction peaks. This procedure could also be used for monitoring stresses during the useful life of such materials.

The electrochemical reaction behavior of a commercial Li-ion battery (LiFePO4-based cathode, graphite-based anode) has been measured via in situ neutron diffraction. A multivariate analysis was successfully applied to the neutron diffraction data set facilitating in the determination of Li bearing phases participating in the electrochemical reaction in both the anode and cathode as a function of state-of-charge (SOC). The analysis resulted in quantified phase fraction values for LiFePO4 and FePO4 cathode compounds as well as the identification of staging behavior of Li6, Li12, Li24, and graphite phases in the anode. An additional Li-graphite phase has also been tentatively identified during electrochemical cycling as LiC48 at conditions of ∼5% to 15% SOC.

The Powder Diffraction File (PDF) is a collection of single phase X-ray powder patterns, maintained and distributed by the JCPDS-International Centre for Diffraction Data. Over the past 10 years there has been increasing use of the PDF in computer readable form, but the limited amount of disk space available on most commercial powder diffractometer systems has limited use to a small subset of the total PDF. The recent availability of low-cost Compact Disk Read Only Memory (CD-ROM) systems offers an attractive alternative to conventional disk media. This paper describes a low-cost Personal Computer/CD-ROM system, “PC-PDF”, having a total available storage of 550 Mbytes. While seek times are relatively slow – typically, 0.5 seconds are required to traverse the complete PDF – by use of optimum packing and access algorithms, search strategies based on PDF numbers, chemistry, strongest d-spacing, etc., operate at a speed causing no great inconvenience to the user.

X-ray powder diffraction is one of the most sensitive methods for the analysis of crystalline forms of silica. In addition to detection and quantification, it can determine the specific crystalline species in the sample. The principal limitations of the method depend on the effective volume of the sample in the X-ray beam and the number of crystallites in the proper orientation to diffract. Detection limits are usually reported as 2 μg in thin-film filter mounts and 0.1% in bulk samples that are free of interference from associated minerals. Filter methods are most often used for air quality monitoring and several standardized procedures have been certified. Standard procedures for bulk samples are difficult to certify because of the variability of the matrices and their potential interferences. All of the methods of quantification require calibration with known samples of quartz or cristobalite. Certification of standard samples involves characterization of the particle and crystallite size and size distribution and amorphous content as well as determining the X-ray diffraction response. Although quartz is readily available and cristobalite is easy to synthesize, preparation of quantities of sufficient uniformity and stability is a limiting factor in certifying such samples for reasonable costs. Conventional diffraction equipment can be used for crystalline silica analysis at the present detection limits required by safety standards. Relatively simple modifications of the diffractometer will increase its sensitivity to small amounts of silica and improve the lower limits of quantification.

Fifteen reference patterns of boride, silicide, selenide, telluride and oxide ceramics are reported. Included in the 15 reference patterns are data for three oxide phases which are related to high critical temperature (Tc) superconducting materials: BaCuO2, BaCuSm2O5 and BaCuYb2O5. Four other patterns are included which represent phases previously not contained in the PDF. The remaining six are major corrections of data already included in the file. Reference data for phases Ba2CuY3O6.8 and Ba2Y3CuO6 appeared in the special July superconductor issue of the Advanced Ceramic Materials, 1987. The general methods of producing these X-ray powder diffraction reference patterns are described in this journal, Vol. 1(1), 40 (1986).

Samples were mixed with one or two internal standards: silicon (SRM640a), silver, tungsten, or fluorophlogopite (SRM675). Expected 2θ values for these internal standards are specified in the methods described (ibid.). Data were measured with a computer controlled diffractometer. The POWDER-PATTERN system of computer programs was used to locate peak positions, to calibrate the patterns, and to perform variable indexing and least-squares cell refinement. A check on the overall internal consistency of the data was also provided by a computer program.

The crystal structure of anhydrous δ-D-mannitol (C6H14O6) was solved from high-resolution synchrotron X-ray powder diffraction data collected on a mixture containing 20% and 80% w/w of β- and δ-D-mannitol, respectively. The direct space simulated annealing program PSSP, and Rietveld analysis employing GSAS were used to determine and refine the structure. The polymorph has monoclinic symmetry, space group P21 with a=5.089 41(5) Å, b=18.2504(2) Å, c=4.917 02(5) Å, and β=118.303(2)°. There is one molecule in the irreducible volume of the unit cell. The pattern of hydrogen bonding is significantly different than the previously known α and β forms.

The structure of Co2Al5 (hP28, P63/mmc) was refined by means of Rietveld method. The shortest Co–Al distance amounts 2.338 Å. Co2Al5 shows a homogeneity range between Co29Al71 and Co27.5Al72.5 at 1125 K. The concentration dependence of lattice parameters was also measured. The axial ratio c/a increases with increasing mole fraction of aluminum.

Fourteen reference patterns of oxide ceramics are reported. Included in the fourteen reference patterns are data for two high critical temperature superconducting oxide related phases (BaCuHo2O5 and Ba2YCu3O6.56). The general methods of producing these X-ray powder diffraction reference patterns were described previously in this journal (Vol. 1, No. 1, pg. 40 (1986)).

The following fourteen reference patterns of carbide, nitride, telluride, and oxide ceramics are reported. Included in the fourteen reference patterns are data for three high Tc superconducting oxide related phases (Ba2CuO3, CuSrO2, and Ba2Cu3YO6). The general methods of producing these X-ray powder diffraction reference patterns are described in this journal, Vol. 1, No. 1, pg. 40 (1986).

Samples were mixed with one or two internal standards: silicon (SRM640a), silver, tungsten, or fluorophlogopite (SRM675). Expected 2θ values for these internal standards are specified in the methods described (ibid.). Data were measured with a computer controlled diffractometer. The POWDER-PATTERN system of computer programs was used to locate peak positions, to calibrate the patterns, and to perform variable indexing and least-squares cell refinement. A check on the overall internal consistency of the data was also provided by a computer program.

The crystal structure of La2SiO5 was refined from laboratory X-ray powder diffraction data (CuKα1) using the Rietveld method. The crystal structure is monoclinic (space group P21∕c,Z=4) with lattice dimensions a=0.93320(2) nm, b=0.75088(1) nm, c=0.70332(1) nm, β=108.679(1)°, and V=0.46687(1) nm3. The final reliability indices were Rwp=7.14%, RP=5.52%, and RB=3.83%. There are two La sites in the structural model, La1 and La2. La1 is ninefold coordinated to oxygen, forming a tricapped trigonal prism with a mean La1-O distance of 0.263 nm. The La2O7 coordination polyhedron is a distorted capped octahedron with a mean La2-O distance of 0.251 nm. The La1O9 polyhedra share faces and the La2O7 polyhedra share edges, forming two sets of sheets that alternate parallel to the (100) plane. These sheets are linked through SiO4 tetrahedra and non-silicon-bonded oxygen atoms to form a three-dimensional structure. This compound is isomorphous with the low-temperature (X1) phases of R2SiO5 (R=Y and Gd). The volumes of RO9 polyhedra steadily increase with increasing ionic radius of R, from Y3+ to Gd3+ to La3+, which causes substantial volumetric expansion of the crystals.

The measurement of lattice parameters using the Le Bail method was shown to be inappropriate for a complex, low symmetry, structure, even with high resolution synchrotron diffraction data. The method failed as a result of ambiguous indexing in the absence of constraints on diffraction intensities, that arise when a structural model is used, combined with the large number of reflections. A caution for the use of the Le Bail and other whole-powder pattern decomposition methods is presented, particularly for high reflection density data.

Diffraction peak profiles broaden due to the smallness of crystallites and the presence of lattice defects. Strain broadening of powders of polycrystalline materials is often anisotropic in terms of the hkl indices. This kind of strain anisotropy has been shown to be well interpreted assuming dislocations as one of the major sources of lattice distortions. The knowledge of the dislocation contrast factors are inevitable for this interoperation. In a previous work the theoretical contrast factors were evaluated for cubic crystals for elastic constants in the Zener constant range 0.5≤Az≤8. A large number of ionic crystals and many refractory metals have elastic anisotropy, Az, well below 0.5. In the present work the contrast factors for this lower anisotropy-constant range are investigated. The calculations and the corresponding peak profile analysis are tested on ball milled PbS and Nb and nanocrystalline CeO2.

Two new solubility-limiting phases relevant to nuclear waste disposal are reported, namely CeSiO4 and Ca2Ce8(SiO4)O2, produced by hydrothermal synthesis at 180 °C. X-ray diffraction data are presented for both compounds. Rietveld refinement was performed for each of these phases. CeSiO4 was confirmed to be a zircon structure type, with space group I41/amd, unit cell type="bold">abold=6.9564(3), type="bold">cbold=6.1953(4) Å. Bond lengths for SiO4 are in excellent agreement with published values; Ce4+ is coordinated to eight oxygen atoms with four regular and four short bonds. Ca2Ce8(SiO4)O2 was shown to have an apatite structure, with space group P63/m and unit cell type="bold">abold=9.4343(3), type="bold">cbold=6.8885(4) Å. The unit cell and bond lengths were found to be slightly smaller than would be expected from other lanthanide-containing analogs; possible reasons for this are discussed.

A significant feature for the atomic structure of the intermetallic compounds Co2Al5 (hP28), monoclinic m-Co4Al13(mC(102-7.2) [notation according to Parthé etal. (1993)] and orthorhombic o-Co4Al13 (oP102) is the occurring of the filled pentagonal channels. Least-square refined lattice parameters as well as powder diffraction data are reported for these homeotypic phases.

X-ray and neutron fiber diffraction has been used to study cellulose as it is converted from its naturally occurring crystal phase, cellulose I, to an activated crystal phase, cellulose IIII, by ammonia treatment. The detailed crystal structures determined for cellulose Iβ, an intermediate ammonia-cellulose I complex, and cellulose IIII, reveal a structural transition pathway: hydrogen bonded sheets of chains in cellulose Iβ slip with respect to each other to accommodate the penetrating ammonia guest molecules in the intermediate complex. On evaporation of ammonia from the intermediate complex, there is a relative small change in chain packing as an inter-sheet ammonia bridge is replaced by an inter-sheet hydrogen bond in cellulose IIII. When cellulose IIII is heated it converts back to cellulose Iβ. Both ammonia-cellulose I and cellulose IIII have extended chains of cooperative hydrogen bonds in relatively open crystal structures that may add to their susceptibility to rapid change.

Crystalline phases present in the three NIST SRM Standard Portland cement clinkers 8486, 8487, and 8488 have been quantified from XRD powder patterns, (CoKα radiation), using the full-profile Rietveld method. Included in the Rietveld refinement are rhombohedral (R), monoclinic (M), and triclinic (T) crystal polymorphic forms of C3S, as well as crystal polymorphs of C2S and C3A. It is necessary to specify the phase crystallography including polymorphs, because of the extreme superposition of alite and belite XRD lines in the clinker patterns. Unsatisfactory results occur when only one or two of the C3S polymorphs are used in the Rietveld quantification; best results occur when all three polymorphs for C3S are included. The latter are called RMT-type refinements. The Rietveld full-profile XRD method is as precise as the microscope point-counting (MPC) method, but much less labor-intensive. The Rietveld method can quantify the C3S phase polymorphs, as well as total C3S. Rietveld and MPC methods give the same phase weight percentages for the three NIST standard clinkers. Calculated oxide weight percentages obtained from Rietveld phase weight percentages agree well with oxide percentages determined by XRF analysis. Bogue mineral weight percentages do not agree with Rietveld or MPC data, while transformation of the Bogue mineral percentages to oxides does not compare well with XRF analysis.

The high-temperature phases Cu4In, Cu9In4(h) and Cu2In(h) cannot be retained by quenching. In contrast to this, splat-cooling specimens of these alloys yielded single phase products. Cell parameters in the range of homogeneity of these phases were measured. Powder crystal data for Cu4In(W type), Cu9In4(h) (Cu9Al4type) and Cu2In(h) (Ni2In type) are given.

Graphite has been widely used as a negative electrode material in lithium-ion batteries, and recently it has attracted attention for its use in potassium-ion batteries. In this study, the first in situ X-ray diffraction characterisation of a K/graphite electrochemical cell is performed. Various graphite intercalation compounds are found, including the stage three KC36 and stage one KC8 compounds, along with the disappearance of the graphite during the potassiation process. These results show new insights on the non-equilibrium states of potassium-ion intercalation into graphite in K/graphite electrochemical cells.