Laser-driven ion acceleration is well established using solid targets mainly in the target normal sheath acceleration regime. To follow the increasing repetition rate available on high-intensity lasers, the use of high-density gas targets has been explored in the past decade. When interacting with targets reaching densities close to the critical one, the laser pulse can trigger different acceleration mechanisms such as Collisionless Shock Acceleration (CSA) or hole boring. Particle-in-cell simulations using ideal target profiles show that CSA can accelerate a collimated, narrow energy spread and few hundreds of megaelectronvolts ion beam on the laser axis. Nevertheless, in real experiments, the laser will not only interact with an overcritical, thin plasma slab with sharp density gradients, but also with lower density regions surrounding the core of the gas jet, extending to several hundreds of micrometres. The interaction of the laser with these lower density wings will lead to nonlinear effects that will reduce the available energy to drive the shock in the high-density region of the target. Optically tailoring this target could mitigate that issue. Recent experiments conducted on different laser facilities aimed at testing several tailoring configurations. We first tested a scheme with a copropagating picosecond prepulse to create a lower density plasma channel to facilitate the propagation of the main pulse, while the second one was a transverse tailoring driven by nanosecond laser pulses to generate blast waves and form a high-density plasma slab. The main results will be presented here and the methods compared.

Influence of the local-ionization-induced neutral depletion on the thrust imparted by the magnetic nozzle plasma thruster is discussed by simply considering reduction of the neutral density due to the ionization in the thruster model combining the global source model and the one-dimensional magnetic nozzle model. When increasing the rf power, it is shown that the increase rate of the plasma density is reduced, while the electron temperature continues to increase due to a decrease in the neutral density. Since the major components of the thrust are originated from the electron pressures in the source and in the magnetic nozzle, the increase in the electron temperature contributes to the increase in the thrust in addition to the gradual density increase by the rf power. The model qualitatively predicts the reduction of the thruster efficiency by the neutral depletion for the high-power condition, compared with the constant neutral density model.

A new magnetic mirror machine named KAIMIR (KAIST mirror) has been designed and constructed at the Korea Advanced Institute of Science and Technology (KAIST) to study mirror plasma physics and simulate the boundary regions of magnetic fusion plasmas such as in a tokamak. The purpose of this paper is to introduce the characteristics and initial experimental results of KAIMIR. The cylindrical vacuum chamber has a length of 2.48 m and a diameter of 0.5 m and consists of three sub-chambers, namely the source, centre and expander chambers. A magnetic mirror configuration is achieved by electromagnetic coils with a maximum magnetic field strength of 0.4 T at the mirror nozzles and 0.1 T at the centre. The source plasma is generated by a plasma washer gun installed in the source chamber with a pulse forming network system. The typical discharge time is ~12 ms with a ~6 ms (1–7 ms) steady period. Initial results show that the on-axis electron density at the centre is 1019–20 m−3 and the electron temperature is 4–7 eV. Two parameters were varied in this initial phase, the source power and the mirror ratio, which is the ratio of highest to lowest magnetic field strength in the mirror-confined region. We observed that the increase of the electron density was mitigated for a source power above 0.2 MW. It was also found that the electron density increases almost linearly with the mirror ratio. Accordingly, the stored electron energy was also linearly proportional to the mirror ratio, similar to the scaling of the gas dynamic trap.

The paper presents an overview of experimental results of an investigation of different energy loss channels in the gas dynamic trap (GDT), which is a magnetic mirror plasma confinement device in the Budker Institute of Nuclear Physics. Energy losses along magnetic field lines are considered as well as losses onto radial limiters, which restrict the plasma column radius and provide its magnetohydrodynamic stability via the ‘vortex confinement’ mechanism. The losses along the field lines were measured using a set of pyroelectric bolometers on the plasma absorber and the losses onto the limiters were determined with thermistors from their temperature rise. Additionally, the losses due to charge exchange of fast plasma ions on the residual neutral gas in the GDT were measured using a longitudinal array of pyroelectric bolometers mounted on the wall of the central cell. An attempt was made to draw up the energy balance in the GDT in order to identify the predominant loss channels and reduce those losses in the future.

Collisionless charged particle motion and its transport in the two-wire model (TWM) with no axial magnetic fields is investigated numerically. The TWM configuration contains a magnetic X-point, and single particle motions in such a field have two conserved quantities: the total kinetic energy and the base field line value which is a quantity derived from the axial canonical momentum. As gyrating particles travel along the field lines, they may reach near the X-point region where the magnetic moment, the first adiabatic invariant, can be occasionally shifted due to a large gradient of the field. When the magnetic moment becomes large, resulting in a large Larmor radius, particles probabilistically cross the X-point to migrate to the opposite side of the TWM configuration. These phenomena are investigated with single particle simulations. We find that the statistical behaviour of the seemingly chaotic magnetic moment shifts are completely determined by the two aforementioned conserved quantities, and also that there exists a threshold energy, determined by the base field line value, allowing only particles with a higher energy to cross the separatrix and migrate. It is found that the crossing time is distributed exponentially, and that the migration confinement time, which is the average crossing time, is shorter for particles with a base field line closer to the separatrix and a higher energy. We provide an empirical expression, derived with the simulations, for estimating the collisionless migration confinement time.

A high-speed solenoid-type pulsed valve is applied to a water-fuelled magnetron sputtering thruster, which can lead a compact and neutralizer-free electric propulsion device by generating a thrust due to the ejection of the sputtered target material, in order to minimize the size of the gas feeding system. The pulsed valve is opened for approximately 5 msec and the gaseous water is introduced into the source via a gas line connected to the source. A dc high voltage is firstly applied between the cathode and the anode; then the discharge is sustained for the period in which a gas pressure enough for the discharge is maintained and a change in the discharge mode is observed during the discharge pulse. To investigate the impact of the mode change on the thrust generation, a temporally resolved measurement of the force is equivalently performed by installing a pulsed voltage power supply and by changing the pulse width of the discharge voltage. The results show the temporal reduction of the thrust-to-power ratio during a pulsed discharge due to the nonlinear correlation between ion energy and sputtering yield. It is suggested that the use of a pulsed valve would be useful for downsizing of the electric propulsion system, while an optimization to properly control the gas flow rate is needed for further development.

This paper is devoted to experimental studies of plasma confinement with high relative pressure ($\beta$) in the Gas Dynamic Trap (BINP, Novosibirsk). In previous high-$\beta$ confinement studies a maximum local $\beta = 0.6$ was achieved in the fast-ion turning point, contributed to by a beam-driven population of fast ions with an anisotropic distribution function. In this study the axial magnetic field profile was modified to bring the turning points closer to one another, which effectively increased the energy density of plasma and pushed the $\beta$ value higher. Experiments were performed for two non-standard magnetic configurations, where the axial fast-ion confinement region length was reduced by 1.5 and 2 times compared with the standard configuration. The average values of $\langle \beta _{\perp } \rangle$ over the plasma central cross-section were found to be 0.1 and 0.18, respectively, for the two configurations, with the latter value significantly exceeding the $\langle \beta _{\perp } \rangle =0.08$ of the standard configuration, in which the previous record was set. Moreover, halving the fast ion confinement region almost doubled the D–D fusion proton flux from the trap centre compared with the standard configuration. The electron temperature in both new magnetic configurations was only slightly smaller than in the standard configuration. In addition, an effect of Alfvén ion–cyclotron instability (AICI) development on the pressure in the turning points is discussed. Presumably, with some decrease in magnetic field an evolving AICI does not result in considerable pressure axial redistribution, so the pressure maximum is in the turning points’ vicinity despite the instability.

In this paper, we investigate the kinetic stability of classical, collisional plasma – that is, plasma in which the mean-free-path $\lambda$ of constituent particles is short compared with the length scale $L$ over which fields and bulk motions in the plasma vary macroscopically, and the collision time is short compared with the evolution time. Fluid equations are typically used to describe such plasmas, since their distribution functions are close to being Maxwellian. The small deviations from the Maxwellian distribution are calculated via the Chapman–Enskog (CE) expansion in $\lambda /L \ll 1$, and determine macroscopic momentum and heat fluxes in the plasma. Such a calculation is only valid if the underlying CE distribution function is stable at collisionless length scales and/or time scales. We find that at sufficiently high plasma $\beta$, the CE distribution function can be subject to numerous microinstabilities across a wide range of scales. For a particular form of the CE distribution function arising in strongly magnetised plasma (viz. plasma in which the Larmor periods of particles are much smaller than collision times), we provide a detailed analytic characterisation of all significant microinstabilities, including peak growth rates and their associated wavenumbers. Of specific note is the discovery of several new microinstabilities, including one at sub-electron-Larmor scales (the ‘whisper instability’) whose growth rate in certain parameter regimes is large compared with other instabilities. Our approach enables us to construct the kinetic stability maps of classical, two-species collisional plasma in terms of $\lambda$, the electron inertial scale $d_e$ and the plasma $\beta$. This work is of general consequence in emphasising the fact that high-$\beta$ collisional plasmas can be kinetically unstable; for strongly magnetised CE plasmas, the condition for instability is $\beta \gtrsim L/\lambda$. In this situation, the determination of transport coefficients via the standard CE approach is not valid.

In view of the ultimate goal of producing long-lasting quasi-stationary discharges required for future fusion power stations, the numerical study of steady-state solutions of equations describing the particle and energy balance rightfully gets ample attention. Transient states may, however, differ significantly from the steady state ultimately reached and will – in practice – impact on the actual fate of the discharge. Using brutally simple models, the present paper highlights a number of aspects to illustrate this dynamics. It e.g. shows the different signature of wave and beam heating, potentially giving room to transiently trigger desirable effects that may allow us to better steer a discharge.