Electronic navigational charts (ENCs) are specialised geospatial datasets, issued by or on the authority of a government or hydrographic office, in accordance with the International Hydrographic Organisation's (IHO) standards, specifications and symbol sets. The datasets generally comprise encoded information collected from hydrographic surveys, aimed primarily at the safety of navigation. Most ENCs are not openly available, since the encrypted datasets can be acquired through various license schemes via a centralised distribution network coordinated by two organisations operating on behalf of the coastal states that produce them. This paper describes a methodology and an integrated system developed at the National Technical University of Athens Cartography Laboratory for the generation of web-based nautical charts utilising open data and free software. The system compiles nautical charts compliant with IHO's S-101 latest standard; using open hydrospatial data retrieved from marine spatial data infrastructures (MSDI) and other qualified volunteered geographic information (VGI) sources. Open-source geospatial libraries and web-map vector technologies are used to build the system components and software scripts developed to enable automated compilation. The study also discusses how the system can be improved further by leveraging web services for end-to-end process automation and satellite-derived bathymetry for accurate depiction of seabed topography in low-depth areas.

An aircraft wing is the carrier of imaging payload (interferometric synthetic aperture radar (SAR) or array SAR) of a high-resolution aerial remote sensing system, and high-precision estimation of wing deformation is the key. There are two main traditional modelling methods for wing deformation, namely stochastic theory modelling and material mechanics modelling only dealing with single disturbance, of which the model parameters are derived from empirical values. Aiming at the complex multi-source disturbance of an aircraft wing, this paper separately probes the influence of external disturbance (air disturbance) and internal disturbance (engine vibration) based on the real-time observation of sensors and classifies the wing deformation on the basis of auto-regressive (AR) modelling for parameter identification. With the authentic flight data of a certain types of aircraft, the experimental analysis shows that the wing deformation under the influence of engine vibration is the 14th-order AR model, and the wing deformation under the influence of turbulence is the fifth-order AR model. Meanwhile, this paper also provides an experimental verification idea for the wing deflection modelling built on the second- or third-order Markov model.

The use of multiple observations near noon with a traditional sextant to determine a fix is common among celestial navigators. A recent invention is the fixed-angle ‘Bris sextant’ that comes with advantages, but imposes constraints due to its invariant nature. We propose a method by which both longitude and latitude can be fixed using only two sightings with such a device, each equidistant from the meridian. By modelling the solution space for the method, we explore some of the potential utility across geography and seasonal variation. Although this method was developed for use with a Bris fixed-angle sextant, it can also be conveniently used with a more traditional marine or level-bubble sextant. Because this method is computationally cumbersome, it is most convenient when used in a computer or tablet application, or with tables.

Cadets training to become licensed mariners based on the International Convention on Standards of Training, Certification and Watchkeeping for Seafarers (STCW) Code have been under pressure to keep up with the countermeasures against COVID-19 from the Spring of 2020. For several reasons, sea training voyages were restricted or cancelled, and the schooling style was drastically changed from face-to-face to remote. Since the research vessel owned by Tokai University is not a training vessel exclusively for cadets, the decision was inevitably made to make more effective use of the shiphandling simulator. Because training in the simulator also had to be done remotely, new ideas were put into practice to explore the possibility of building new educational methods. Numerous open-ended evaluation comments were submitted by the cadets who received remote training on the simulator. The results suggested that the remote use of the simulator is likely to be an effective method for training in bridge resource management (BRM).

Although multiple global navigation satellite systems (multi-GNSS) with more visible satellites have a high success rate, they make positioning time-consuming. Partial ambiguity resolution (PAR) can improve the efficiency of multi-GNSS; however, at present PAR cannot simultaneously achieve fast and high-precision positioning with a high success rate. Therefore, PAR based on ambiguity dilution of precision- and convex-hull-based satellite selection is proposed. The experimental results of the proposed PAR, its corresponding satellite selection algorithm, the classical PAR, and the low-cutoff-elevation-angle-based multi-GNSS show that the proposed PAR outperforms the classical PAR, i.e., it achieves fast and high-precision positioning with a success rate of 100⋅0%. Furthermore, in terms of R-ratio-test-based ambiguity validation, it improves the reliability of carrier-phase-based integrity monitoring of multi-GNSS and the corresponding satellite selection algorithms. In addition, its positioning accuracy is close to that of multi-GNSS and higher than that of the classical PAR, with maximum differences of 0⋅3 and 2⋅4 cm, respectively. The proposed single (dual) frequency-based PAR improves single/dual-frequency multi-GNSS efficiency by more than 54⋅9%/80⋅4% (42⋅0%/75⋅8%) when 14⋅4 (13⋅2) out of 24⋅4 satellites are selected.

The high-precision global navigation satellite system (GNSS) positioning technique on smartphones has been attracting increasing interest in recent years. However, the low-cost GNSS chip and linearly polarised antenna embedded inside smartphones result in data lack and quality degradation, which hinders the high-precision GNSS positioning on smartphones. In this study, a mixed single- and dual-frequency quad-constellation precise point positioning (MSDQ-PPP) model is proposed to improve the positioning performance on smartphones by taking advantage of all available GNSS observations. Static and kinematic tests were made using a Xiaomi Mi8 smartphone to fully assess the MSDQ-PPP performance with comparisons to single-frequency PPP (SF-PPP) and dual-frequency PPP (DF-PPP) models. The static test results show that the MSDQ-PPP can reach an accuracy level of 0⋅39 m and 0⋅50 m in the horizontal and vertical directions with a convergence time of less than 10 min in most sessions. The MSDQ-PPP improves the positioning accuracy by 53% and 31% over the DF-PPP in the horizontal and vertical directions, respectively. In contrast to the SF-PPP, the positioning accuracy and convergence time improvement can reach 62% and 90% in the horizontal direction, respectively. In the kinematic test, the MSDQ-PPP achieves an accuracy of 0⋅7 m and 1⋅5 m in the horizontal and vertical directions, respectively. The accuracy improvement rates reach 78% and 76% over the DF-PPP, and 13% and 38% over the SF-PPP, respectively. Both static and kinematic MSDQ-PPP tests indicate significantly enhanced positioning performance.

Time-differenced carrier phase (TDCP) is a commonly used method of precise velocimetry, but when the receiver is in a dynamic or complex observation environment, the estimation accuracy is reduced. Doppler velocimetry aims at estimating instantaneous velocity, and the accuracy is restricted by the accuracy of measurement. However, in such unfavourable cases, the Doppler measurement is more reliable than the carrier phase measurement. This paper derives the relationship between Doppler observation and TDCP observation, then proposes a Doppler enhanced TDCP algorithm, for the purpose of improving the velocity estimation accuracy in dynamic and complex observation environments. In addition, considering the error caused by the constant speed state update model in the robust Kalman filter (RKF), this paper designs a terrain adaptive and robust Kalman filter (TARKF). After three experimental tests, the improved TDCP algorithm can significantly increase the speed measurement accuracy to sub-metre per second, and the accuracy can be further improved after using TARKF.

This paper, in allusion to the limitations of traditional transfer alignment methods based on the external measurement equipment or the empirical model of angular deformation, proposes a rapid and accurate transfer alignment method without relying on the empirical angular deformation model. Firstly, the relationship between the actual angular deformation and the angular velocities measured by the gyroscopes in the master and slave inertial navigation systems (INSs) is derived to roughly estimate the angular deformation. Secondly, according to the error characteristics of gyroscopes, the error model of angular deformation is established. Thirdly, expanding the angular deformation error instead of the installation error angle, flexure angle and flexure angle rate into the state vector, a low-order transfer alignment filtering model independent of the empirical angular deformation model is established. The proposed method not only gets rid of the dependence on an empirical angular deformation model, but also realises the rapid and accurate initial alignment of the slave INS without adding any external measurement equipment. The simulations and experiments evidence the validity of the proposed transfer alignment method.

To address the shortcomings of existing methods for rotorcraft searching, positioning, tracking and landing on a ship at sea, a dual-channel LIDAR searching, positioning, tracking and landing system (DCLSPTLS) is proposed in this paper, which utilises the multi-pulse laser echoes accumulation method and the physical phenomenon that the laser reflectivity of the ship deck in the near-infrared band is four orders of magnitude higher than that of the sea surface. The DCLSPTLS searching and positioning model, tracking model and landing model are established, respectively. The searching and positioning model can provide estimates of the azimuth angle, the distance of the ship relative to the rotorcraft and the ship's course. With the above parameters as inputs, the total tracking time and the direction of the rotorcraft tracking speed can be obtained by using the tracking model. The landing model can calculate the pitch and the roll angles of the ship's deck relative to the rotorcraft by using the least squares method and the laser irradiation coordinates. The simulation shows that the DCLSPTLS can realise the functions of rotorcraft searching, positioning, tracking and landing by using the above parameters. To verify the effectiveness of the DCLSPTLS, a functional test is performed using a rotorcraft and a model ship on a lake. The test results are consistent with the results of the simulation.

The fish-eye star sensor with a field of view (FOV) of 180° is an important piece of equipment for attitude determination, which improves the visibility of stars significantly. However, it also brings the star identification (star-ID) difficulties because of imprecise calibrations. Thus, a fish-eye star-ID algorithm supported by the integration of the precise point positioning/inertial navigation system (PPP/INS) is proposed. At first, a reference star map is generated in combination with the distortion model of the fish-eye camera based on the position and attitude information from the PPP/INS. Then the star points are extracted in a specific neighbourhood of the reference star points. Subsequently, the extracted star points are individually tested and identified according to angular distance error. Finally, the real-time precise attitude is determined based on the star-ID results. Experimental results show that, 270–310 stars can be identified in a fish-eye star map with an average time of 0.03 s if the initial attitude error is smaller than 1.5° and an attitude determination accuracy better than 10″ can be achieved by support from PPP/INS.

Indoor/Outdoor (IO) detection (IOD) using Wi-Fi- and smartphone-based technologies is in high demand and interest in both the industrial and research fields. This paper proposes a novel and effective hybrid IOD (HIOD) approach for detecting a smartphone user's IO location. The HIOD approach uses signals received from both Wi-Fi and GPS as well as the latest positioning technologies such as multilateration, fingerprinting and machine learning. This paper proposes and implements two-level signal-to-noise ratio (SNR) threshold parameters for the first time, which are specifically derived from GPS signals through 42 empirical tests at seven test sites with adequate environmental factors considered. Using the newly derived IOD threshold parameters and a set of IO detection rules, the HIOD approach is then tested at 20 test points (TPs) in a city canyon area, where most of the TPs are under semi-indoor or semi-outdoor conditions. The final test results show that a 100% IOD rate is achieved.

Ship anomaly detection is a vital aspect for monitoring navigational safety in specific water areas. Considering the effect of water channel boundaries, we propose the detection of an abnormal ship trajectory based on the complex polygon (DATCP) method to detect ship anomalies in this study. With the automatic identification systems (AIS) data from the Yangtze River estuary, a case study is created to verify the effectiveness of the proposed DATCP method. The case study results reveal that the proposed DATCP method can provide higher detection accuracy than the conventional A* algorithm. The feature analysis results indicate that ship anomalies are significantly influenced by ship type, time period, weather conditions and ship traffic characteristics.

To improve the safety of cruise tourism in the Yangtze River Delta region (YRD), a new cruise ship home port is needed. This paper studies the process for selection of a site for the new cruise home port. Through analysis of previous cases of cruise tourism safety accidents, it is found that the basic situation of the cruise port, such as the channel, the port, logistics support and scenic places to visit, is important to cruise operation safety. An index system of site selection for a cruise home port is established, and the optimal choice of location for a regional cruise home port – between Shanghai, Zhoushan and Nantong – is analysed by the analytic hierarchy process (AHP). The research shows that the order of preferred site for the cruise home port is Zhoushan, then Shanghai and, third, Nantong. This paper can provide a reference for the layout of the whole industry chain of the cruise economy in the YRD in the future. This will promote the integration of development of the YRD, and enhance the regional connectivity and policy system efficiency in the YRD.

Bathymetric simultaneous localisation and mapping (SLAM) methods yield accurate navigation results for autonomous underwater vehicles (AUVs) and can construct consistent seabed terrain maps. Multiple independently working vehicles can complete tasks like surveying and mapping efficiently, which means cooperative bathymetric SLAM using multiple AUVs is suitable for large-scale seabed mapping. However, the transmission of bathymetric measurements collected using a multi-beam echo sounder over a low bandwidth, noisy, and unreliable acoustic channel is difficult, making cooperative bathymetric SLAM very challenging. This paper develops a graph-based cooperative bathymetric SLAM system that can compress many bathymetric measurements into small-scale acoustic packets and yield accurate navigation results with a 10% loss of acoustic packets caused by unreliable acoustic communication. According to the simulation conducted using the field data, the new algorithm is shown to be robust and capable of providing accurate location and mapping results over a low bandwidth, noisy, and unreliable acoustic channel.