We describe an integrated navigation system based on Global Navigation Satellite Systems (GNSS), an Inertial Navigation System (INS) and terrestrial ranging technologies that can support accurate and seamless indoor-outdoor positioning. To overcome severe multipath disturbance in indoor environments, Locata technology is used in this navigation system. Such a “Locata-augmented” navigation system can operate in different positioning modes in both indoor and outdoor environments. In environments where GNSS is unavailable, e.g. indoors, the proposed system is designed to operate in the Locata/INS “loosely-integrated” mode. On the other hand, in outdoor environments, all GNSS, Locata and INS measurements are available, and all useful information can be fused via a decentralised Federated Kalman filter. To evaluate the proposed system for seamless indoor-outdoor positioning, an indoor-outdoor test was conducted at a metal-clad warehouse. The test results confirmed that the proposed navigation system can provide continuous and reliable position and attitude solutions, with the positioning accuracy being better than five centimetres.

The possibility of identifying the type of multipath environment and receiver motion (e.g. pedestrian, vehicular) using pattern recognition approaches based on multipath parameters is investigated. This allows the receiver to adjust its tracking strategy and optimally tune its tracking parameters to mitigate code multipath effects. A Support Vector Machine (SVM) classification method with a modified Gaussian kernel is applied in this approach. A set of temporal and spectral features is extracted from the correlation samples of the received signals in different environments to train the classifier. The latter is then used in the structure of stochastic gradient-based adaptive multipath compensation and tracking techniques to tune the signal tracking parameters based on the environment and receiver motion. Simulation and real data measurements using Galileo E1B/C signals are performed to assess the validity of the proposed environment identification approaches and to evaluate the impact of the proposed context-based receiver parameter tuning techniques on tracking performance in multipath environments. Test results showed that the proposed classifiers have an accuracy between 86% and 92%, and the tracking performance improved by about 15%.

This paper is intended to provide an outline of how the lead and line formed a vital, but often overlooked, role in safe navigation during the 16th Century, with some comments on its later use up to, and into the 20th Century. During this period, the development of the more mathematical dead-reckoning and the more exciting astro-navigation attracted the attention of the literate commentators who were responsible for record keeping while the often illiterate sailors got on with practising their craft. Also, May (1970), has commented that, “the navigators during the great age of discovery must have made extensive use of the lead and line, but references are extremely sparse, for all their rough log-books were destroyed and only the most important references to their navigational proceedings were copied into the fair accounts of their voyages which have come down to us.”

Vessel traffic in the Arctic is expanding in volume both within and transiting the region, yet the infrastructure necessary to support modern ship navigation is lacking. This includes aids to navigation such as buoys and beacons that can be difficult to place and maintain in this hostile environment that stretches across vast distances. The results of research are described which determine whether virtual electronic Aids to Navigation (eAtoN) existing entirely as digital information objects can overcome the practical limitations of physical aids to navigation (AtoN) and Automatic Identification System (AIS) radio eAtoN. Capabilities unique to virtual eAtoN that are not available using either physical or AIS radio technologies are also examined including dynamic and real time properties and immunity to Global Navigation Satellite System (GNSS) and AIS spoofing, aliasing, denial of service attacks and service outages. Conclusions are provided describing potential methods of deployment based upon similar concepts already in use.

Relative position awareness is a vital premise for the implementation of emerging intelligent transportation systems. However, commercial Global Satellite Navigation Systems (GNSS) receivers do not satisfy the requirements of these applications. Fortunately, Cooperative Positioning (CP) systems, based on inter-vehicle communications, have improved performance of relative positioning in a Vehicular Ad Hoc Network (VANET). CP techniques rely primarily on measurements from the Global Positioning System (GPS) to deliver measurements or positions that describe the location of individual vehicles. In urban environments, the reduced quality or complete unavailability of GPS measurements challenges the effectiveness of any CP algorithm. In this paper, a new enhanced tightly–coupled CP technique is presented by adding the measurements from low-cost inertial sensors and the Doppler shift of the carrier of Dedicated Short-Range Communications (DSRC) signals. In the enhanced CP method proposed here, vehicles communicate their Inertial Measurement Unit (IMU) data and GPS measurements. Each vehicle fuses the GPS measurements and IMU data and the inter-node range-rates based on the Doppler shift of the carrier of DSRC signals. Based on analytical and experimental results, in a full GPS coverage environment, the new tight integration CP outperforms tight CP with Inertial Navigation System (INS), tight CP and differential GPS by at least by 6%, 15%, and 28%, respectively. In a GPS outage, the performance improvement can be up to 60%, 55%, and 66% respectively.

Navigational error accounts for half of the accidents and serious incidents in close to shore maritime transport in Norway predominantly due to the rapidly changing weather conditions and the dangerous nature of the narrow inshore waters found along the Norwegian coast. This creates a dependence on Differential Global Positioning System (DGPS) use and any disruption to this service can lead to an increased accident rate. The aim of this paper is to research the jamming vulnerability of existing maritime receivers and to understand if an upgrade to a multi-constellation or multi-frequency receiver would improve system resilience. The novelty of this work is a comparison of jamming resilience between different combinations of multiple constellations (GPS and Globalnaya Navigatsionnaya Sputnikovaya Sistema (GLONASS)) and multi-frequency Global Navigation Satellite System (GNSS) signals. This paper presents results from GNSS jamming trials conducted in the northern part of Norway, confirming previous research and indicating that typical maritime GPS receivers are easy to jam and may produce erroneous positional information. Results demonstrate that the single frequency multi-constellation receivers offer better jamming resilience than multi-frequency (L1 + L2) GPS receivers. Further, the GLONASS constellation demonstrated a better resilience than GPS. Results demonstrate a known correlation between GPS L1 and L2 frequencies, as well as a probable over-dependence on GPS for signal acquisition, meaning that no signal can be received without GPS L1 present. With these limitations in mind, the authors suggest that the most economic update to the single frequency GPS receivers, currently used for maritime applications, should be multi-constellation GPS + GLONASS receivers. This solution is cheaper and it also offer better jamming resistance for close to shore navigation than dual frequency receivers.