Because of their geochemical properties, the Çakmaktepe (Uşak) kaolin deposits have been considered as primary. New sedimentological, mineralogical, and geochemical data suggest that the Çakmaktepe kaolins are secondary deposits of sedimentary processes after hydrothermal alteration of the source rocks. The kaolins in the Çakmaktepe deposit were formed from the hydrothermal alteration of calcalkaline Karaboldere volcanics (KBV). The kaolinized materials were then reworked and accumulated in a lacustrine basin. The argillic alteration zones were associated with faults, and lateral zonation of minerals was observed in the KBV. Smectite was the major phyllosilicate in the ‘outer zone’. The alteration mineralogy of the ‘inner zone’ was similar to that of the Çakmaktepe kaolins and consisted mainly of kaolinite with minor amounts of smectite and alunite. The trace-element abundances in the kaolinized volcanics and the Çakmaktepe kaolins indicated hypogene conditions. The δ18O values of the Çakmaktepe kaolins ranged from 0.2 to 5.92%, which indicated that the Çakmaktepe kaolinites were formed at temperatures between 92 and 156°C, and the δD values ranged from −91.68 to −109.45‰. The irregular edge-to-face morphology, the variation in grain-size, a few broken crystals of kaolinite, the deficiency of dissolution-replacement and crystallization mechanisms, and the the low sphericity, very angular, and poorly sorted quartz crystals in the kaolins all result from transport processes. The sedimentary structures, including trough cross-lamination, tool marks, and load casts, indicate transportation by turbulent waters and deposition of kaolin layers in a shallow lake.

During recent decades, the search for possible repositories for high-level nuclear waste has yielded large amounts of sorption data for actinides on different minerals. Clays and clay minerals are of special interest as potential host-rock formations and backfill materials, by virtue of their good retardation properties. Neptunium (Np) is one of the actinides which is considered in long-term scenarios due to its long-lived nuclide 237Np (t1/2 = 2.1 × 106 y). Because neptunium sorption is heavily dependent on the experimental conditions, comparison of sorption data from different experiments is challenging. Normalizing reported data with respect to the surface area of the sorbent enables conversion of conventional distribution coefficients (Kd) to normalized (Ka) values, which improves comparability among the results of different experiments. The present review gives a detailed summary of sorption data of Np on clays and clay minerals and examines critically the applicability of the Ka approach.

Atomistic simulations of 2:1 clay minerals based on parameterized forcefields have been applied successfully to provide a detailed description of the interfacial structure and dynamics of basal planes and interlayers, but have made limited progress in exploring the edge surfaces of these ubiquitous layer-type aluminosilicates. In the present study, molecular dynamics simulations and energy-minimization calculations of the edge surfaces using the fully flexible CLAYFF forcefield are reported. Pyrophyllite provides an ideal prototype for the 2:1 clay-mineral edge surface because it possesses no structural charge, thus rendering the basal planes inert, while crystal-growth theory can be applied to identify two major candidates for the structure of the edge surfaces. Models based on these candidate structures reproduced bulk crystal bond distances accurately when compared to X-ray data and ab initio molecular simulations, and the predicted edge surface bond distances were in agreement with those determined via ab initio simulation. The calculated surface free energy and surface stress led to an accurate prediction of pyrophyllite nanoparticle morphology, while surface excess energies calculated for the edge surfaces were always negative. These results are consistent with the observed pyrophyllite nanoparticle morphology, with the concept of negative interfacial energies, and conditions that may give rise to them including a role in the stabilization of layer-type nanoparticulate minerals. Molecular dynamics simulations of hydrated nanoparticle edge surfaces indicated five reactive surface oxygen sites on the dominant candidate edge, in agreement with a recent model of proton titration data for 2:1 clay minerals. These promising results illustrate the potential for classical mechanical atomistic simulations that explore edge surface phenomena at much greater length- and times-scales than are currently possible with computationally expensive ab initio methods.

In order to better understand the possible interactions between steel canisters and a claystone host rock, in this case the Callovo-Oxfordian rock (COx), the present study investigated in detail, under conditions relevant to high-level radioactive waste repositories (anoxic conditions, temperature of 90°C), the reactions between metallic iron and: (1) COx; (2) the clay fraction extracted from COx (CF); and (3) mixtures of CF with quartz, calcite, or pyrite. Batch experiments were then carried out in the presence of NaCl-CaCl2 background electrolyte, for durations of 1, 3, and 9 months. Solid and liquid end-products were characterized by a combination of techniques including liquid analyses, transmission and scanning electron microscopies, X-ray diffraction, N2 adsorption at 77 K, and Mössbauer spectroscopy. The interaction between CF and metallic iron appeared to proceed by means of pathways similar to those illustrated in previous studies on interactions between metallic iron and purified clays. In spite of the many similarities with previous studies, significant differences were observed between the behavior of COx and CF, particularly in terms of pH and Eh evolution, iron consumption, chemical composition of the neoformed particles, and textural evolution. Such differences demonstrate the important role played by non-clay minerals in reaction pathways. The addition of carbonates or pyrite to CF did not lead to significant change in reactivity. In contrast, under the conditions used in the present study, i.e. for relatively low iron:clay ratios, the presence of quartz strongly influenced reaction pathways. In the presence of quartz, magnetite was observed only in trace abundances whereas the amounts of magnetite were significant in experiments without quartz. Furthermore, filamentous serpentine particles with a small Al:Si ratio appeared which could develop from an FeSiAl gel that only forms in the presence of quartz. Considering that most clay rocks currently being considered for radioactive waste disposal contain significant amounts of quartz, the results obtained in the present study may be of significant interest for predicting the long-term behavior of clay barriers in such sites.

Talc is an important industrial mineral with a broad range of applications. Particle size and crystal structure have a significant influence on the potential uses. The present study examined the influence of grinding and ultrasound treatment on talc from a new deposit, Gemerská Poloma, in Slovakia. The general knowledge that grinding produces progressive structural disorder leading to amorphization, whereas sonication has a negligible effect on the talc crystal structure, was confirmed by X-ray diffraction (XRD), infrared (IR) spectroscopy, and transmission electron microscopy (TEM). Partial reduction of particle size along with delamination was observed by XRD after sonication, low-angle laser light scattering (LALLS), scanning electron microscopy (SEM), and TEM. The specific surface area (SSA) increased slightly after prolonged sonication, but grinding initially caused a rapid increase in SSA followed by a drastic decrease after prolonged grinding time of up to 120 min which was attributed to the aggregation of amorphized talc. Sonication and grinding had different influences on the thermal behavior of the talc studied. Sonication decreased slightly the dehydroxylation temperature, whereas grinding added a significant mass loss at low temperature, arising from the dehydration of hydrated Mg cations released from the talc structure during amorphization. The initial high whiteness value of talc decreased slightly after grinding or sonication. Thermogravimetry was suggested as a useful tool to track and predict changes in the talc structure upon sonication and grinding.

The conventional methods of direct bromination of organic compounds with elemental bromine have several major drawbacks such as handling difficulty, corrosive effect, and toxicity, in addition to over-bromination and problems with isolation of products from the reaction mixture. Supported catalysts and reagents have become popular in the synthesis of organic chemicals over recent decades because they have overcome almost all of the drawbacks noted above. In the present study, a new clay polymer nanocomposite (CPN)-supported brominating agent was prepared from montmorillonite (Mnt) and styrene-co-vinyl pyridinium polymer. The reagent was obtained by the direct interaction of a two-fold excess of poly(styrene-co-N-methyl-4-vinylpyridinium) bromide with Na-montmorillonite (NaMnt) through ion exchange between Na+ of the NaMnt and pyridinium ions in the copolymer to provide CPN3 with free methylpyridinium bromide side chains. The structure of the CPN3 prepared was characterized by infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy. Treatment of the CPN3 with bromine using the bromide ions which remained led to the perbromide-supported reagent, CPN4. The activity of the resulting CPN4 brominating reagent was examined through direct bromination of some alkenes, arenes, and carbonyl compounds and compared with the effectiveness of a crosslinked polymeric perbromide reagent. The yields obtained from application of the reagent were moderate to excellent. The advantages of this reagent, such as stability at room temperature, ease of regeneration from the polymeric by-product, and the yields of the brominated products, confirm the viability of using a CPN-supported brominating agent as a reactive reagent in organic chemistry synthesis.