Black shale is a dark-colored mudrock containing organic matter that may have generated hydrocarbons in the subsurface or that may yield hydrocarbons by pyrolysis. Many black shale units are enriched in metals severalfold above expected amounts in ordinary shale. Some black shale units have served as host rocks for syngenetic metal deposits.

Black shales have formed throughout the Earth's history and in all parts of the world. This suggests that geologic processes and not geologic settings are the controlling factors in the accumulation of black shale. Geologic processes are those of deposition by which the raw materials of black shale are accumulated and those of diagenesis in response to increasing depth of burial.

Depositional processes involve a range of relationships among such factors as organic productivity, clastic sedimentation rate, and the intensity of oxidation by which organic matter is destroyed. If enough organic material is present to exhaust the oxygen in the environment, black shale results.

Diagenetic processes involve chemical reactions controlled by the nature of the components and by the pressure and temperature regimens that continuing burial imposes. For a thickness of a few meters beneath the surface, sulfate is reduced and sulfide minerals may be deposited. Fermentation reactions in the next several hundred meters result in biogenic methane, followed successively at greater depths by decarboxylation reactions and thermal maturation that form additional hydrocarbons. Suites of newly formed minerals are characteristic for each of the zones of diagenesis.

The method of known additions for estimating clay-mineral content was reversed in that increasing proportions of soil clay were added to a standard composed of equal weights of kaolinite, illite, and montmorillonite. After glycolation, peak-area ratios were calculated from 7.2 (kaolinite), 10 (illite), 14 and 17 Å (vermiculite and montmorillonite) diffraction peaks of standard, mixes, and soil clay. Ratios were plotted against % soil clay from the standard (0%) through the mixes (14 to 77%). Curves of fit were calculated and projected to 100% soil clay giving theoretical values which agree with measured values. As weight proportions are known in the standard, the projections permit estimates of clay-mineral weight proportions in the soil clay.

Cretaceous bentonites were collected in outcrop from the Sweetgrass Arch and the Disturbed Belt in Montana. The mixed-layer illite-smectite (I/S) components of the bentonites from the Sweetgrass Arch have from 0 to 25% illite layers and no detectable structurai Fe2+, whereas the samples from the Disturbed Belt have from about 25 to 90% illite layers, and all contain Fe2+. A positive correlation (r = 0.89) exists between the percentage of structural iron that is Fe2+ and the amount of fixed interlayer K in the I/S.

The higher percentage of illite layers in the samples from the Disturbed Belt is attributed to reactions related to elevated temperatures caused by burial beneath thrust sheets. The increase in Fe2+/Fe3+ with increasing percentages of illite layers is tentatively attributed to a redox reaction involving the oxidation of organic matter. Although there is no statistical evidence for an increase in octahedral charge with an increase in illite layers when all the samples are considered together, iron reduction may have contributed as much as 10 to 30% of the increase in total structural charge that occurred in any given sample during metamorphism. The remaining structural charge increase can be attributed to the substitution of Al3+ for Si4+ in the tetrahedral sites.

Mössbauer spectra of 9 glauconite samples from Upper Cretaceous and Lower Tertiary strata in the South Island of New Zealand contain a broad shoulder due to low intensity absorption continuous between 1.0 and 2.5 mm/sec when the absorber is at room temperature; the shoulder is absent, and sharp peaks are apparent in spectra taken with the absorber at 80°K. The data suggest that electron transfer occurs between adjacent Fe3+ and Fe2+ ions at room temperature. The low temperature spectra indicate that all Fe in the glauconites is in octahedral coordination. Fe3+ and Fe2+ ions occur in both eis and trans sites; Fe3+ shows a strong preference for eis sites whereas Fe2+ shows an even stronger preference for trans sites.

The partially variable oxidation state of Fe in glauconite is interpreted in terms of a geochemical model for glauconitization of a degraded or incomplete progenitor phyllosilicate. The model involves exchange of Fe2+ for other cations which temporarily stabilize the progenitor, followed by Fe2+-Fe3+ charge transfer reactions. Each reaction results from the system's tendency towards equilibrium. The model is supported by the observation that artificially leached glauconite increases both its Fe3+ and its Fe2+ content when placed in a solution containing Fe2+ as the only Fe ion present.

Biotite in deeply weathered granitic rocks in southwestern Australia has altered to exfoliated grains composed of biotite, mixed-layer clay minerals, kaolinite, vermiculite, gibbsite, goethite, and hematite. Discrete vermiculite and vermiculite-dominant mixed-layer clay minerals are not major weathering products. Oxidation of octahedral iron in biotite is associated with ejection of octahedral cations, loss of interlayer K, and a contraction of the b-dimension of the biotite sheet. Si, Mg, Ca, Mn, K, and Na are lost from biotite during weathering, and Ti, Al, Ni, and Cr are retained. Fe and water have been added to the grains during weathering. Much Fe occurs as aggregates of microcystalline, aluminum-rich goethite particles on flake surfaces and within etchpits, with smaller amounts occurring as hexagonal arrangements of lath-shaped crystals of goethite on flake surfaces.

Single grain X-ray and electron diffraction patterns of weathered biotite flakes exhibit groupings of 001 and hk reflections of biotite, vermiculite, mixed-layer clay minerals, and kaolinite indicating that the secondary minerals are in parallel crystallographic orientation to the parent biotite. Asterism of biotite reflections is enhanced by weathering. Gibbsite crystals developed in parallel basal orientation to biotite flakes. Most goethite in weathered biotite occurs as aggregates of randomly oriented crystals in cleavages and on grain surfaces. Some goethite is present on micaceous fragments as 0.05-μm size, lathlike crystals in a hexagonal arrangement with their (100) face resting on the (001) biotite face. Selected area electron diffraction patterns of aggregates of lathlike goethite crystals contain 0kℓ, 1kℓ, and 2kℓ reflections due to undulation of the aggregates and the extreme thinness of the crystals. These patterns indicate that the close packed anion layers in goethite coincide with the brucite-like layer of the micaceous minerals.

The presence of Al-bearing goethites has been unequivocally established in Venezuelan laterite sediments by means of infrared spectroscopy (IR), chemical dissolution, and X-ray powder diffraction (XRD) methods. The composition of these samples ranges from [Fe0.89Al0.11]O(OH) to [Fe0.76Al0.24]O(OH). The data of dissolution experiments using a modified dithionite (CDB) treatment suggest a parallel behavior between Fe and Al; the gradual dissolution of Al is associated with the destruction of the Al-containing goethite. The interpretation of the CDB dissolution results for SiO2/Fe2O3 is different; silica was only slightly extracted from phases other than goethite. Substitution of Fe3+ by Al3+ in these goethites was represented on the XRD patterns by a lowering of the (110) and (111) reflections corresponding to a reduction in size of the unit cell of goethite. IR spectroscopy showed the formation of such solid solutions by a shift of the 405 cm−1 absorption band, assigned to v (Fe-O) in synthetic goethite, to >460 cm−1 in the spectrum of Al-bearing natural goethite. Moreover, this spectrum shows a shift of the 3140 cm−1 absorption, due to v (OH), to higher frequencies, indicating a H-bond weakening in [FexAl(1−x)]O(OH) compared to FeO(OH).

The rates of dehydroxylation of smectites intercalated with the decomposition products of Ni(phen)3SO4 are from 2 to 4 times greater than those of clays without the heat-stable intercalate. These results suggest that the intercalated material, in keeping the clay sheets separated, provides a more ready avenue for water loss during the dehydroxylation process.

The adsorption of butanol, hexanol, and octanol on alkylammonium montmorillonites of different chain length is similar to the distribution of alcohol between an organic solvent and water in bulk solution. Successive expansion of the clay layers starts at critical alcohol/cation ratios of 0.6 or lower which are biased mean values due to the heterogeneity of the cation density of the mineral. In the interlamellar phase autoassociation of the alcohols occurs in contrast to their behavior in aqueous solution. The intrinsic association constants (kM ~ 7) are of the same magnitude of the values found in cyclohexane. The alcohols can associate with molecules fixed on specific sites of the mineral and on free monomers. The ratio of fixed to free monomers is of the order of 10/1.

The charge density distribution among different classes of a series of reduced charge mont-morillonites is heterogeneous as in the parent Camp Berteau clay. In addition, charge reduction proceeds inhomogeneously. Up to 20% differences in charge density can be accounted for by aikyl chains extending at the edges of the clay particle. A realistic charge density-cation-exchange capacity relationship for hec-torite, Otay montmorillonite, and a series of reduced charge montmorillonites of Camp Berteau is obtained by accounting for the influence of particle radius and for the extent of alkyl chains lying outside the clay layers in the charge density calculations.