Organic crop production is often limited by the inability to control weeds. An 18-yr data set of weed cover in organic crop rotations at the long-term Farming Systems Project at Beltsville, MD, was analyzed to identify meteorological and management factors influencing weed abundance. A path analysis using structural equation models was employed to distinguish between the direct effect of factors on weed cover and the indirect effect on weed cover through effects on crop competitiveness. Grain yield of corn (Zea mays L.) and soybean [Glycine max (L.) Merr.] served as a surrogate for crop competitiveness and was found to be the most important factor influencing weed cover. Precipitation during late vegetative and early reproductive crop growth had a strong positive effect on crop yield, and thereby a negative indirect effect on weed cover, but this effect was partially offset by a positive direct effect on weed cover. Delayed crop planting date and crop rotational diversification including crops other than summer row crops had a moderate negative effect on weed cover, while having minimal effect on crop performance. Rotary hoeing also had a direct negative effect on weed cover, but a corresponding negative effect on crop performance resulted in a diminished total effect on weeds. Results demonstrate the complex interactions that define the relative abundance of weeds faced by organic growers, but, generally, factors that enhanced crop competitiveness provided the most effective weed management.

Various mechanical plus chemical weed control systems for dry bean production were evaluated at Carrington, ND and Crookston and Staples, MN during 1991 and 1992. A dozen tillage plus herbicide weed control systems are available to growers that can provide selective and effective weed control in dry beans without reliance on chloramben—a standard herbicide on dry beans that has been lost. Dry bean yields were similar with low or high level tillage treatments because most of the herbicide treatments with one cultivation gave adequate weed control and any additional tillage did not improve weed control. Kidney bean yields and prices were greater than either pinto or navy beans so the net returns (bean market value minus production costs) were much greater for kidney bean production. Dry bean producers in the North Central part of the U.S. have at their disposal dependable mechanical plus chemical weed control systems, and their market value has been sufficient to make dry bean production very economical in this region.

A 3-yr field study was conducted to compare an in-row cultivator versus a standard row-crop cultivator to decisions made with WEEDCAM, a weed/corn management computer decision aid, for controlling annual weeds within the row in irrigated corn. In the absence of herbicides, weeds were always controlled better with the in-row cultivator than with the standard row-crop cultivator. However, grain yield and gross margin were affected only in 1991 when weeds emerged simultaneously with corn, and rain delayed the first cultivation 10 d. The in-row cultivator plots not only averaged 34% more grain ha-1 than the standard row-crop cultivator plots, but gross margin was $143 ha-1 more. Weed densities each year were about 95% less in plots managed in accordance with the computer model WEEDCAM simulations than in the non-herbicide treated post-planting tillage plots. Grain yields and gross margins were not affected by weed seedbank density, pre-cultivation tillage, or type of cultivator when weed management decisions were based on WEEDCAM simulation ranking. In the absence of herbicides, weeds can be controlled successfully in corn with an in-row cultivator, but success will depend on such factors as weed seedbank density, cultivation timeliness, and relative time of weed and corn emergence.

Information on the effects of multiple weed management tactics in corn is needed to develop integrated weed management systems. The effectiveness and compatibility of an in-row cultivator as compared to a standard interrow cultivator used with reduced rates of a soil-applied herbicide, rotary hoeing, and/or a bioeconomic model for POST herbicide selection was examined. Weed control with a single rotary hoeing at corn emergence controlled annual weeds similarly to two rotary hoeings. One-third recommended use rate of alachlor controlled weeds similarly to a two-thirds rate. Reduced rates of alachlor controlled more weeds than rotary hoeing over 2 yr. The in-row cultivator required early-season weed control (rotary hoeing or reduced alachlor rate) for optimum efficacy. The in-row cultivator provided better weed control than the standard cultivator while the cost of operating the two cultivators was similar. Thus, the in-row cultivator was more efficient than the standard cultivator. Furthermore, less intensive early-season weed control was required with the in-row cultivator for maximum weed control as compared to the standard cultivator. Rotary hoeing plus the in-row cultivator provided similar weed control to other weed management tactics that required both soil-applied and POST herbicides. Gross margin was influenced more by corn yield than cost of weed management tactics.

An integrated approach to weed management in pinto bean is needed since available herbicides seldom adequately control all weed species present in a field. A two-year study was conducted to assess weed control efficacy and pinto bean tolerance to mechanical weeding from a rotary hoe or flex-tine harrow at crook, unifoliolate, and trifoliolate stages of bean development. Weed control was similar for both implements and all timings in 1993. In 1994, mechanical weeding at trifoliolate and both crook and trifoliolate stages controlled more weeds than at other growth stages, regardless of type of implement. Using the flex-tine harrow reduced pinto bean stand, but results based on growth stage were not consistent each year. Damage to pinto bean hypocotyls and stems was observed with the flex-tine harrow used at both crook and trifoliolate stages in 1994. Rotary hoeing did not reduce pinto bean stand or cause injury. Yield and seed weight did not differ among treatments in either year.

Field experiments were conducted to evaluate postplant crop residue, green and yellow foxtail control, and wheat grain yield after fall application of trifluralin granules in undisturbed small grain stubble. Levels of postplant residue were at least 48% cover (line transect method) and 2750 kg/ha of aboveground dry matter where herbicide granules were left unincorporated or were incorporated with conservation-till methods, including an undercutter, rotary hoe, or undercutter followed by a rotary hoe. Trifluralin at 0.56 kg/ha applied as granules in mid October in untilled stubble and incorporated with conservation-till methods controlled foxtail 81 to 88%, with control appearing slightly lower when granules were not incorporated. The 81 to 88% foxtail control in conservation-till treatments was comparable to control achieved with trifluralin at 0.56 kg/ha applied in mid October on conventionally-tilled soil and incorporated by a field cultivator. Foxtail control improved somewhat as trifluralin rate was increased to 0.84 and 1.12 kg/ha in conservation-till treatments. Slight wheat stand reductions at 1.12 kg/ha of trifluralin did not appear to reduce wheat yield. Fall application of trifluralin granules in these high-residue conditions apparently minimizes herbicide losses by photodecomposition and volatility, thereby facilitating good trifluralin efficacy the following season.

Effectiveness of rotary hoeing with cultivation and comparison of an in-row cultivator with a standard row-crop cultivator were determined in dry edible bean. The effectiveness of in-row cultivation conducted at various timings and frequencies was examined. The in-row cultivator was more effective in reducing weed populations than the standard cultivator, although at least two mechanical weeding operations were needed to reduce weed populations to levels of the herbicide check (EPTC [S-ethyl dipropyl carbamothioate] plus ethalfluralin). When the in-row cultivation was delayed until the second trifoliolate stage or later, weed populations were greater than those in the herbicide check. In situations with high weed populations, rotary hoeing prior to cultivation was required to reduce weed populations to levels similar to the herbicide check. An in-row cultivator has potential to improve mechanical weed control options in a crop such as dry edible bean. The types of adjustments made in combination with soil textures, soil moisture, and operator experience affect overall weed control. Thus, it is expected that the level of weed control will vary from year to year and even field to field for the same operator.

Weed management experiments with kidney beans were conducted at one irrigated site in 1991 and at two irrigated sites near Staples, MN during 1992. Green foxtail was the most difficult weed to control at the three research sites which agrees with survey results from dry bean growers regarding their worst weed problems. Hairy nightshade increased rapidly when weed management methods were reduced. Dry bean seed yields were highest in cultivated check plots on the farmer's field and in conventional practices plots at the Irrigation Research Center. Net economic returns, averaged over 1991 and 1992, for producing kidney beans at the Irrigation Research Center were $899/ha using conventional practices, $791/ha with cover crop practices, $734/ha with cultivated checks, $690/ha with herbicides only, and $208/ha on weedy checks. Kidney beans are an economical crop for North Central growers, but adequate weed management technologies are necessary for profitable production.

Cooperative research was initiated by a multidisciplinary team of weed scientists and agricultural economists in 1975 that laid the foundation for integrated weed management research in Colorado. Colorado's integrated weed management research has four phases: weed seed bank decline, systems approach to weed management, bioeconomic modeling, and multiple weed management tactics. Each phase considered weed seed bank, weed control efficacy, weed control costs, crop yield, and gross margin. All four phases emphasize the need for a weed management system that minimizes seed production in situations where a high soil weed seed bank exists. However, once the weed seed bank is reduced, a weed management program with less than 100% weed control can be employed without increasing the seed bank. Intensive weed management systems are seldom justified when economics, weed control, and weed seed bank are considered. Integrated weed management approaches require integrating crop and weed biology with management tactics. Integrated weed management requires advanced managerial skills and often more time than traditional approaches.

Increased crop densities and postplant tillage were evaluated as nonchemical methods to supplement metribuzin for improved broadleaf weed control in dry pea and lentil. The effects of 50, 100, and 150% of recommended 220 kg/ha pea and 67 kg/ha lentil seeding rates and two dates of rotary hoeing and harrowing on pea, lentil, and broadleaf weeds were studied with and without metribuzin for two years. Under favorable growing conditions, crop competition gave 72 and 99% weed control in pea and 33 and 70% weed control in lentil with the 50 and 150% seeding rates. Under less favorable conditions, control was 21 to 39% with the low and high pea and lentil seeding rates. At recommended seeding rates, metribuzin gave greater than 90% control in either crop or year. Postplant tillage 12 to 27 d after planting slightly reduced crop densities in three tillage treatments in one year, but not the second. Postplant tillage did not affect crop yield or improve weed control. In all studies, pea was similar to or more competitive than lentil in suppressing broadleaf weeds. Because neither non-chemical practice significantly improves weed control, changes are not recommended for weed management in pea and lentil.

Various chemical and mechanical weed control treatments for kidney bean production were evaluated on irrigated, sandy loam sites from 1993 to 1995 near Staples, MN. Weed biomass can be controlled either mechanically or chemically, but a combination of the two gave the most effective and dependable weed control over years. Good weed control by either mechanical or chemical means reduced white mold infection of dry bean because of better aeration of dry bean plants and thus less favorable conditions for infection. Dry bean seed yields were inversely related to weed yields, and weed competition was similar from indigenous stands of either grass or broadleaf weeds. Row cultivation was more effective than rotary hoeing for controlling weeds, reducing white mold infection of dry bean, and increasing dry bean seed yields.

Eight cultivation programs with several equipment combinations were compared with each other and with an atrazine plus pendimethalin herbicide program with and without supplemental cultivation from 1992 to 1994. In two of the three years, cultivation with a rotary hoe or tine weeder reduced weed seedling density by 39 to 74%. Tine weeding was more effective than rotary hoeing in 1992. Rotary hoeing or tine weeding reduced corn populations by an average of 6%. Weed control by different types of inter-row cultivators varied little, except that an in-row cultivator provided better control than a rolling cultivator in two years and better control than a shovel cultivator in one year. Weeds establishing from seeds were better controlled by herbicides in all three years, but weeds establishing from roots, rhizomes, and tubers were controlled as well or better by cultivation. Weed control was sometimes better using herbicides plus cultivation than with herbicides alone, but the combination damaged the crop in two of the three years. Cost of mechanical treatments which combined inter-row cultivation with rotary hoeing or tine weeding differed from that for the herbicide treatment by less than 2%. Yields of the best mechanical treatment and the herbicide treatment were nearly equal in all years, but the best mechanical regime varied between years. Consequently, mean net return was moderately higher for the herbicide treatment.

There is significant interest from processors in producing organic sweet corn and snap bean. However, large-scale production is necessary for this to be a practical and economical venture for processors. This study focused on the feasibility of managing weeds in organic sweet corn and snap bean, utilizing methods that are practical in large hectarage. Tactics such as rotary hoe, interrow cultivation, and a stale seedbed were evaluated alone or in combination. Hand-weeded and herbicide-based treatments were included for each crop for comparison. Percentage weed control, weed biomass, and crop yield were quantified, and net profit was calculated for each treatment. Organic weed management was feasible in snap bean, with yields similar among several of the organic treatments and the herbicide treatment in all 3 yr of the study. Interrow cultivation was the most effective means of organic weed control in snap bean. Organic weed management was possible in snap bean because it is a short-season crop and an effective competitor with weeds in the crop row. Organic weed management was more difficult in sweet corn because of the longer crop season and poor competition with weeds in the crop row. In sweet corn, the organic treatment involving three interrow cultivations was the only one consistently similar in yield to the herbicide treatments. Higher net profits were attained for most of the organic treatments in both crops because of the organic premium. Market saturation and organic premium adjustments are factors for grower consideration in this potential industry, particularly for sweet corn production.

Organic farmers in western Canada rely on tillage to control weeds and incorporate crop residues that could plug mechanical weed-control implements. However, tillage significantly increases the risk of soil erosion. For farmers seeking to reduce or eliminate tillage, potential alternatives include mowing or using a roller crimper for terminating green manure crops (cover crops) or using a minimum tillage (min-till) rotary hoe for mechanically controlling weeds. Although many researchers have studied organic crop production in western Canada, few have studied no-till organic production practices. Two studies were recently conducted in Saskatchewan to determine the efficacy of the following alternatives to tillage: mowing and roller crimping for weed control, and min-till rotary hoeing weed control in field pea (Pisum sativum L.). The first study compared mowing and roller crimping with tillage when terminating faba bean (Vicia faba L.) and field pea green manure crops. Early termination of annual green manure crops with roller crimping or mowing resulted in less weed regrowth compared with tillage. When compared with faba bean, field pea produced greater crop biomass, suppressed weeds better and had less regrowth. Wheat yields following pea were not affected by the method of termination. Thus, this first study indicated that roller crimping and mowing are viable alternatives to tillage to terminate field pea green manure crops. The second study evaluated the tolerance and efficacy of a min-till rotary harrow in no-till field pea production. The min-till rotary hoe was able to operate in no-till cereal residues and multiple passes did not affect the level of residue cover. Field pea exhibited excellent tolerance to the min-till rotary hoe. Good weed control occurred with multiple rotary hoe passes, and pea seed yield was 87% of the yield obtained in the herbicide-treated check. Therefore, this second study demonstrated that min-till rotary hoeing effectively controls many small seeded annual weeds in the presence of crop residue and thus can reduce the need for tillage in organic-cropping systems.