This research article proposes a dual-sense dual-port wideband circularly polarized (CP) multi-input multi-output (MIMO) antenna designed for Wi-Fi 6E applications. The main novelty lies in achieving CP for both ports using a truncated rectangular-shaped aperture. By incorporating design and spatial diversity and defective ground structure between the two radiators, the design improves isolation and enables the antenna to generate Left-Hand Circular Polarization (LHCP)depending on the selected feed port. The proposed MIMO rectangular dielectric resonator antenna demonstrates an impressive impedance-matching bandwidth (IBW)from 5.5 to 8.0 GHz (37.10%) as well as an axial ratio bandwidth (ARBW) covering from 6.0 to 6.55 GHz (12.20%). Additionally, the dual-port wideband CP MIMO antenna exhibits satisfactory diversity performance parameters. To validate the simulated results, a physical prototype is fabricated and subjected to experimental testing. The measured outcomes of the fabricated model align closely with the simulated results, confirming the accuracy of the design. With both MIMO and CP capabilities and improved isolation, this proposed model proves beneficial in reducing latency and minimizing the impact of multipath fading. Therefore, it stands as an excellent choice for future devices utilizing the Wi-Fi 6E band due to its broad IBW and overlappingAR.

This paper introduces a tri-band stacked elliptical patch antenna featuring a right-handed circular polarized, designed to operate at the L2, L5, and L1 Global Navigation Satellite System bands. Initially, an elliptic patch is constructed and fed by a probe feed to generate TM110 and TM210 modes at resonance frequencies calculated using Mathieu functions. The probe position is precisely adjusted to excite the quasi-orthogonal mode of TM110 to generate circularly polarized (CP) waves at the L2 and L5 bands. Subsequently, an eye-shaped aperture is engraved into the elliptical patch to enhance the axial ratio (AR) beamwidth in the L2 and L5 bands and stimulate the orthogonal mode of TM210 to produce CP waves at the L1 band. Lastly, a stacked partially elliptical parasitic element is placed beneath the upper slotted elliptical patch to enhance the orthogonality of TM210 surface current versions and thus improve the AR beamwidth at the L1 band. The proposed antenna shows low reflection coefficient values at 1.12–1.33 (L2/L5), and 1.5–1.66 GHz (L1). The AR beamwidths are 133/213∘, 167/163∘, and 36/103∘ at two orthogonal cutplanes at L5, L2, and L1 bands, respectively. The antenna also has decent gains of 6–6.9 dBic across the three bands.

This article presents an innovative design for a low-profile, high-gain circularly polarized (CP) antenna using a single-layer metasurface (MTS). The proposed design incorporates an MTS layer, comprising a 4 × 4 array of hexagonal-shaped patches, printed on the top layer of the substrate. The bottom layer features a coplanar waveguide-fed slotted ground. Circular polarization and broadside radiation are achieved through the application of characteristic mode analysis (CMA). CMA is employed to simultaneously excite desired modes, aiming for wideband circular polarization and gain enhancement. Experimental results validate the effectiveness of the design, with compact dimensions of 0.67λ0 × 0.67λ0 × 0.04λ0. The measurements demonstrate an impressive impedance bandwidth of 84.3% within the 3.7–9.1 GHz. Additionally, a 3-dB axial ratio bandwidth of 18.6% is observed between 4.96 and 5.98 GHz and 3.74% between 8.38 and 8.7 GHz. The antenna exhibits excellent radiation pattern characteristics, featuring a maximum gain of 10.08 dBi at 7.1 GHz. The radiation pattern is symmetrical with broadside directionality, making the antenna well-suited for sensing applications.

In this paper, the design of a circularly polarized (CP) multiple-input–multiple-output (MIMO) antenna system is presented, utilizing a dielectric resonator (DR). This presented antenna system is subsequently integrated with a multifunctional filter, all meticulously structured on a single substrate. The multifunctional filter operates in three modes: reconfigurable band-pass and band-reject filter as well as all-pass filter. The overall structure works as a tunable filtenna. The designed filtenna is expanded into a two-port MIMO system on a unified substrate, providing strong port isolation below −28.5 dB. The overall dimension of proposed radiator is 180 × 180 × 1.6 mm3. The value of peak gain is 5.19 dBic. By switching the states of PIN diodes, the designed filtenna operates as a sensing and communicating antenna for interweave and underlay cognitive radios (CRs). The proposed antenna supports the CP waves within the working band, i.e., 3.6–4.5 GHz. The simulated results are validated by comparing them with the measured results showing less variation among them. MIMO parameters, including the envelope correlation coefficient and diversity gain, have been calculated for the proposed filtenna, representing its suitability for 5G-CR applications.

A multi-band circularly polarized antenna is proposed for WLAN (2.4/5.3/5.8 GHz) and WiMAX (3.5 GHz) applications. The proposed antenna is constructed of a radiation patch and a reflecting metal ground. Characteristic mode theory is utilized to analyze the modes of the patch and based on these results the antenna is optimized. The −10 dB impedance bandwidths of the proposed antenna are 53.53% (2.4–4.15 GHz) and 47.28% (5.25–8.5 GHz), respectively. The antenna radiates left-handed circular polarization in the lower band and right-handed circular polarization in the upper band. A maximum gain of 10 dBic is achieved for the proposed antenna.

A two-port ceramic-based antenna loaded with partially reflecting surface (PRS) is structured and explored. Fan-shaped slot is utilized to create circularly polarized wave in both frequency ranges. Dual frequency ranges are due to hybrid mode creation inside the ceramic material, i.e. HEM11δ and HEM12δ modes. PRS is used to change the phase gradient, which in turn tilts the radiation beam (±35°) obtained from different port in opposite direction. This concept is useful to reduce the envelop correlation coefficient using far-field. Experimental verification confirms that the designed antenna works from 26.1 to 27.5 GHz and 31.7 to 33.6 GHz along with less than 3-dB axial ratio from 26.5 to 27.1 GHz and 31.9 to 33.1 GHz respectively. Orthogonal placement of ports introduces the concept of polarization diversity and decreases the coupling between ports by an amount of −25 dB. Good gain value (up to 7.0 dBi) and better value of diversity performance make the designed radiator applicable for 5 G millimeter-wave uses.

Two metasurface-inspired antennas embedded in a metallic cavity are introduced here. They are expected to be integrated on fast moving platforms enduring harsh accelerations and shocks. The metasurface allows enlarging the antenna bandwidth that is intrinsically reduced for small antennas embedded in sub-wavelength metallic cavities. The first one is only 60 × 60 × 20 mm3 (0.23λ1 × 0.23λ1 × 0.08λ1 at the frequency of 1164 MHz) and presents a dual-band behavior, covering both the lower and upper global navigation satellite systems (GNSS) bands (all GNSS bands are covered). It is fed by four probes and a dedicated circuit, ensuring the phase quadrature between adjacent feeds to achieve circular polarization over these two bands. For the second proposed antenna, circular polarization is achieved using two feed points connected to the radiating aperture of size 50 × 50 × 20 mm3 (0.26λ0 × 0.26λ0 × 0.10λ0 at the frequency of 1559 MHz). It covers the E1, L1, B1, and G1 GNSS bands. The numerical results are successfully validated by measurements.

In this paper, a truncated patch antenna based on the electromagnetic band gap (EBG) structure has been proposed. The fabricated antenna has five operating frequencies at 10.4, 15.68, 19.68, 27.2, and 35.04 GHz. The fabricated prototype of the antenna constitutes a truncated rectangular patch etched with the shape of a symmetrical slot (on top) and an EBG loaded on the ground plane of the dielectric substrate. The optimized volume of the antenna is 20 × 15 × 1.57 mm3. The proposed antenna gives a good radiation pattern for the E-H field in all covered bandwidth and also achieved better performances related to the reference papers. A multiband antenna also covered the 5 G bandwidth, which resonates at 27.2 GHz from 24.2 GHz to 27.84 GHz bandwidth and at 35.04 GHz from 33.84 GHz to 36.2 GHz bandwidth, which can be used in the Internet of Medical Things. On the other hand, X/Ku/K frequency bands have been committed for wireless communication where the multiband antenna can be used to help in monitoring, especially in the case of data transmission from radio frequency sensors to health-care system in real-time applications.

This article explores the possibilities of incorporating a defected ground structure (DGS) for widening the 3 dB axial ratio beamwidth (ARBW) of a simple low-profile planar circularly polarized (CP) antenna. Two pairs of DGSs are etched symmetrically along the diagonals of the ground plane to overcome the limited 3 dB ARBW performance of a crossed-slotted circular-shaped planar CP antenna. Here, one pair of DGSs is orthogonal to another pair of DGSs. The distance between the pairs of DGSs plays a key role in enhancing the 3 dB ARBW by 40.62%. A gap of 0.18λ0 is considered between the DGSs to maintain the symmetrical electric field distribution in the substrate. It also helps to reduce orthogonal current components and provides uniformly distributed patch surface currents. These phenomena collectively help the proposed CP antenna to exhibit right-handed circular polarization radiation with the 3 dB ARBW of 186° and 188° in the E-plane and H-plane, respectively. The measured results yield impedance bandwidth (S11 ≤ −10 dB) of 2.6% (2.283–2.342 GHz), CP bandwidth of 0.9% (2.294–2.315 GHz), gain higher than 4.8 dBic, and total antenna efficiency more than 64% across the entire CP band.

In this paper, a novel circularly polarized (CP) high-gain low-profile single-layer metasurface (MTS) antenna fed by a coplanar waveguide is presented for wideband low radar cross-section (RCS) applications. Characteristics mode analysis (CMA) technique is employed to simultaneously excite the useful modes rather than using conventional technique to achieve circular polarization in the wideband. By analyzing the characteristics modes of the antenna, gain of the antenna is also improved. Experimental results verify good performance of the proposed antenna with a compact size of 0.67λ0 × 0.67λ0 × 0.040λ0. The measured results of the antenna exhibit UWB impedance bandwidth of 96.93% in the frequency range of 3.7–10.65 GHz and 3 dB axial ratio bandwidth of about 41.8% in the frequency range of 5.3–8.1 GHz. The antenna shows a good radiation pattern with a measured peak gain of 7.9 dBic at 7.97 GHz. The proposed antenna achieves out-of-band scattering suppression in the wide range of 10–24 GHz because of MTS structure with peak RCS reduction of 19 dB at 12 GHz. The proposed antenna can be used for c- and x-band applications.

A novel low-profile two-arm backfire tapered cone helical antenna for telemetry tracking and command (TT&C) is introduced theoretically and experimentally in this paper. Compared with the conventional helical antenna, this design has a substantial decrease in its height and an increase both in its half power beamwidth (HPBW) and 3-dB axial ratio beamwidth by replacing the uniform structure with two tapered cone structures. It provides a maximum gain of 5.1 dBi, an excellent circular polarization radiation over a wide angular range of more than 124°, a 3-dB axial ratio bandwidth of 18.8%, a wide HPBW of more than 125°, and nearly equal E- and H- plane far-field patterns with high degree of axial symmetry over S-band (2–2.3 GHz). These excellent radiation characteristics with an endurable and compact structure make it an attractive candidate for TT&C application in microsatellite system, where the installation envelope and space for antenna are extremely limited.

In this work, a compact, wideband, circularly polarized wearable antenna is proposed using asymmetric coplanar strip feeding for wireless health monitor applications in the ISM frequency band. The proposed antenna consists of a composite right/left transmission line (CRLH TL) inspired structure to achieve compactness and a rectangular ring slot is created in the metallic ground to enhance the CP radiation of the antenna. A 5 × 5 artificial magnetic conductor unit cell-based metasurface is designed which is operating at 2.4 GHz as a ground plane for the CRLH-based CP antenna. Implementation of AMC-based metasurface as a ground plane results in enhancement of radiation characteristics of CRLH TL antenna. The proposed antenna has a small footprint of 50 × 50 mm2 with measured impedance bandwidth of 2.3–3.2 GHz. The 3 dB axial ratio bandwidth of the proposed antenna is 2.36–2.78 GHz with peak gain of 5.89 dBi. Simulation and experimental results show that proposed AMC-based antenna is robust in terms of structural deformation. Further, to validate the performance of the antenna for biomedical applications, we have simulated the proposed antenna with human phantom model. The proposed antenna exhibits stable scattering and radiation characteristics with the phantom body environment and due to the inclusion of AMC structure, the proposed design satisfies maximum specific absorption rate value given as per the IEEE standard safety guidelines.

In this article, an innovative design of a broadband circularly polarized compact planar antenna for RFID (radio frequency identification) receivers is presented. The suggested structure used the concept of slots loaded parasitic element printed underneath a coplanar waveguide-fed radiator to achieve the circularly polarized (CP) radiation and size reduction. A parasitic element loaded with F-slot and L-slot, and a window-type slotted ground plane was used to achieve resonance at 2.45 GHz with right-handed circularly polarized radiation for RFID handheld reader application. Experimental results confirmed that the designed antenna of size 16.5 × 14.8 × 1.6 mm3 attained a −10 dB impedance bandwidth of 15.8% (from 2.330 to 2.716 GHz) and 3 dB AR bandwidth of 3.43% (from 2.410 to 2.494 GHz). An axial ratio of 0.43 dB was achieved in the boresight of the antenna at the 2.45 GHz RFID band. The concept of electric field distribution on the antenna was used to elaborate the excitation of CP radiation in the antenna.

This study presents a dual-circularly polarized (CP) Fabry–Pérot (FP) antenna, employing a novel receiver–transmitter (RT) metasurface (MS). The RT-MS unit cell consists of two identical neighboring substrates, with a three-layer metal coating printed on their surfaces. The bottom patch is adopted as a receiver to transfer electromagnetic waves to the top-corner cut patch, passing through the coupling cross-slot sandwiched in the middle. The RT-MS has high reflectivity to achieve a high gain. Through energy and a cross-slot, high aperture efficiency can be realized. A conventional corner cut patch can excite a CP mode of equal magnitude and a 90° phase difference. The RT-MS is arranged in 12 × 12 unit cells and used as a superstrate for a dual-CP antenna. Two orthogonally etched slots fed by two branch-matched orthogonally arranged feed lines are used as feeders to produce perpendicular linearly polarized waves. To enhance the bandwidth and improve the gain, double identical stack substrate patches are placed at the top side of the slot with no air gap, for a wide impedance band and high gain. Two wide CP bands, left-hand circular polarization and right-hand circular polarization, of 12.21–13.1 GHz (7.03%) and 12.35–13.1 GHz (5.89%), respectively, have maximum high gains of 16.5 and 15.97 dBic at 12.58 and 12.7 GHz, respectively, with a compact size of 2.6λ0 × 2.6λ0, suggesting better properties than recent antennas. The aperture efficiency can reach 63.2%. Thus, the RT-MS-based FP antenna is a good candidate for commercial and military communication systems.

A triple-frequency operated concentric annular ring microstrip antenna which is single fed is presented. The proposed antenna with three concentric annular rings and two symmetrical notches on its outer ring and having a cross slot in its ground surface shows triple band at resonance frequency 1.22760, 1.57542, and 2.18 GHz, respectively. At the first two bands (GPS L2 and GPS L1), circular polarization characteristic is observed and the third band observes linear polarization finding its application in Universal Mobile Telecommunication System (UMTS). The complete dimension of the antenna designed and fabricated is only 51.6 × 51.6 × 1.6 mm3. Experimental results depict the proposed antenna gain of 3.31, 3.55, and 3.50 dBi in three bands, respectively, and closely matches with the theoretical results.

A circularly polarized ring cylindrical dielectric resonator antenna (ring-CDRA) of wideband impedance bandwidth is presented in this article. The proposed ring CDRA consist of an inverted rectangular (tilted rectangular) shaped aperture and inverted L-shaped slotted microstrip feed line. The tilted rectangular shaped aperture and inverted L-shaped microstrip feed line generate two-hybrid mode HEM11δ and HEM12δ while ring CDRA and slotted microstrip feed line are used for the enhancement of impedance bandwidth. The proposed ring CDRA is resonating between 6.08 and 12.2 GHz with 66.95% (6120 MHz) impedance bandwidth. The axial ratio (AR) bandwidth of 6.99% (780 MHz) is obtained between 10.76 and 11.54 GHz with a minimum AR value of 0.2 dB at a frequency of 11 GHz. The proposed geometry of ring CDRA has been validated with measurement performed by VNA and anechoic chamber. The operating range of the proposed radiator is useful for different applications in X-band.

We propose a novel Fabry–Pérot (FP) antenna consisting of a checkered polarization-conversion metasurface (PCM), corner-cut square patch antennas, and sandwiched compounds. The proposed antenna achieves low radar-cross-section (RCS), high gain, and wideband circular polarization (CP). The corner-cut square patch antennas facilitate high reflectivity, satisfactory transmission magnitude, and the desired phase difference. An embedded metal between two rings of substrate contributes to reducing cross-polarization, improving transmission efficiency, enhancing bandwidth, and reducing RCS. Following simulations, we fabricated a prototype of the proposed antenna and tested its performance. Measurements from the simulation and prototype tests were similar within a reasonable margin of error. Compared with alternative antennas, our proposed FP antenna offers high gain, wideband CP, low cost, a low RCS, and a lower profile.

A circularly polarized high-power antenna with higher-order mode excitation (TM01) is presented in this paper. The proposed structure consists of metal plates placed on the conical horn antenna's aperture for achieving TM01 to circular polarized TE11 mode conversion at the output. The structure is simulated on CST Microwave Studio. The designed antenna exhibits high gain and a directive radiation pattern. The axial ratio of the proposed structure is below 3 dB. The simulated and measured reflection coefficient for TM01 mode excitation is below −10 dB over a frequency range of 2.95–3.13 GHz. The structure is purely metallic, and the calculated high-power microwave (HPM) capability is up to the MW level. The proposed antenna is helpful for portable HPM systems.

A compact circularly polarized (CP) patch antenna is presented for modern communication systems. The prospective antenna consists of a microstrip-line inset-fed rectangular patch and a defected ground plane. A rotated rectangular slot and a modified electric-inductive-capacitive (m-ELC) resonator are introduced in the patch and the ground plane to achieve multiband behaviour. A corner of the radiating patch is truncated and an arrow-shaped stub is introduced for generating circular polarization. The physical area of the substrate is 0.26λ0 × 0.22λ0, and the radiator size is 0.16λ0 × 0.14λ0, where λ0 is the free-space wavelength estimated at the lowest frequency. The measured (S11≤-10 dB) bandwidths of the antenna are 80 MHz (3.58%) at 2.23 GHz, 75 MHz (2.64%) at 2.84 GHz, 80 MHz (2.50%) at 3.19 GHz, and 70 MHz (1.82%) at 3.83 GHz. The measured 3-dB axial ratio bandwidths are 40 MHz (1.41%), 100 MHz (3.12%), and 60 MHz (1.57%) at 2.84, 3.20 and 3.82 GHz, respectively. The proposed planar antenna design does not need dual-feed or multi-layered patches for achieving multiple CP bands. It offers easy integration with the printed circuits of the communication systems.

This study presents a new design of a four-element multiple-input multiple-output (MIMO) antenna, which is suitable for X-band applications. The circular polarization (CP) operation in this work is attained by using Tai Chi-shaped patches and L-shaped feeds. The proposed four-element MIMO antenna achieves two resonant frequencies, the first one at around 7.75 GHz and the second one with CP radiation is at approximately 10.15 GHz frequency. The measured isolations between ports with 46.7 × 46.7 mm2 total dimensions are <−20 dB. Due to the experiments, the envelop correlation coefficient for the orthogonal and parallel ports of the proposed MIMO antenna is <0.003 and 0.005, respectively. Additionally, the presented antenna has a circularly polarized performance in the frequency band of 9.75–10.41 GHz and the average realized peak gain almost 2 dBic. The investigated antenna in this work is fabricated and tested in which the results are in a good agreement.