Two sediment sections are investigated at Cape Arkhangelos, island of Rhodes, where Pleistocene marine sediments crop out in horsts and grabens of a Mesozoic basement. There, hemipelagic sediments characterized by upper bathyal communities are atypically mixed with much shallower faunal components because they were deposited close to rugged coastal landforms. Biostratigraphic analyses show that the sections were deposited between 1.8 and 0.9 Ma, and between 1.8 and 1.6 Ma, respectively. By combining the planktonic/benthic foraminiferal ratio with 31 bathymetric indicators chosen among extant species of benthic foraminifera, mollusks, and bryozoans, we show that relative sea-level fluctuations can be reconstructed in these atypical settings despite the proximity of steep slopes that favored transportation of allochthonous fauna. The shallow-water components (including gravels and calcareous algae) were transported downslope by the combined action of gravity, currents, and tectonic disturbance that promoted drowning (with a maximum flooding recorded at ca. 1.7 Ma) and then uplift of fault-bounded paleovalleys that formed during the Early Pleistocene. Abrupt facies changes and age differences between sections have been triggered by the irregular paleotopography of the Mesozoic basement, which fostered differential depositional settings, with outer to middle neritic deposits above the horsts and upper bathyal deposits in paleovalleys.

The depth distribution of illite/smectite (I/S) compositions was investigated for a well drilled to a depth of 3462 m on Barbados Island, the only subaerial exposure of the Barbados accretionary complex. The classical pattern of increasing percentage of illite interlayers in the mixed-layer clay with increasing burial depth was not observed. Rather, the data describe an irregular, zig-zag trend with depth. This trend is probably the result of reverse faulting in the section. I/S data were also used to infer several kilometers of uplift and subsequent erosion of the section. This study shows that irregular patterns of clay diagenesis with depth can be anticipated for sequences that have undergone complicated tectonism and deformation. Combined with other geologic information, these patterns can help to determine the tectonic history of the sedimentary sequence.

Seven sedimentary bentonite deposits were investigated in the Miocene series of the Pannonian Basin. The following stratigraphic and genetic characteristics were significant: (1) all deposits were formed within a transgressive series of a given Miocene sequence; and (2) it is possible that the source material of the bentonites is rhyolitic, confirmed by radiometric data proving simultaneous rhyolite tuff volcanism.

A detailed investigation on three lithologically different bentonite horizons within the same transgressive series was made at Sajoábaábony to determine the source material and to determine the causes of the differences. X-ray diffraction, differential thermal analysis and geochemical data of the different lithological types show that they all have rhyolitic source material, although in the case of the lowermost horizon the existence of reworked material from an underlying andesite tuff series is also presumed. The main difference is the degree of weathering. Considering the ratio between the amorphous phase and the montmorillonite, the amorphous volcanic glass can be regarded as the main source of the montmorillonite formation. The differences in the degree of alteration can be related to the changing characteristics of the tuff accumulation and the sedimentation. Transgression decreases the sedimentation rate allowing the optimal alteration of the amorphous phase. The increasing intensity of the tuff accumulation can also limit the bentonite formation because rapid deposition and burial present too little time for the optimal alteration of the amorphous phase.

Summarizing the results from the stratigraphic interpretation of the bentonite deposits and from the comparative analyses of the different bentonite horizons within the same transgressive systems tract, we can state that the relationship of the tectonic-related tuff accumulation and the eustasy-related sedimentation rate can affect both the possibility of bentonite formation in macro-scale and the degree of bentonitization in micro-scale.

The glaciogenic nature of the Yudnamutana Subgroup was first recognized over a century ago, and its global significance was recognized shortly after, with the eventual postulation of a global Sturtian Glaciation and Snowball Earth theory. Much debate on the origin and timing of these rocks, locally and globally, has ensued in the years since. A significant corpus of research on the lithology, sedimentology, geochronology and formal lithostratigraphy of these sequences globally has attempted to resolve many of these debates. In the type area for the Sturtian Glaciation, South Australia’s Adelaide Superbasin, the lithostratigraphy and sedimentology are well understood; however, formal stratigraphic nomenclature has remained complicated and contested. Absolute dates on the stratigraphy are also extremely sparse in this area. The result of these longstanding issues has been disagreement as to whether the sedimentary rocks of the Yudnamutana Subgroup are truly correlative throughout South Australia, and if they were deposited in the same time span recently defined for Sturtian glacial rocks globally, c. 717 Ma to c. 660 Ma. This study presents a large detrital zircon study, summarizes and compiles existing global geochronology for the Sturtian Glaciation and revises the formal lithostratigraphic framework of the Yudnamutana Subgroup. We show equivalence of the rocks that comprise the revised Sturt Formation, the main glaciogenic unit of the Yudnamutana Subgroup, and that it was deposited within the time span globally defined for the Sturtian Glaciation.

U–Pb geochronology, Hf isotopes and trace-element chemistry of zircon grains from migmatite of the upper Sutlej valley (Leo Pargil), Northwest Himalaya, reveal a protracted geological evolution and constrain anatexis and tectonothermal processes in response to Himalayan orogenesis. U–Pb geochronology and ϵHf record separate clusters of ages on the concordia plots in the migmatite (1050–950 Ma, 850–790 Ma and 650–500 Ma). The 1050–950 Ma zircon population supports a provenance from magmatic units related to the assembly of Rodinia. A minor amount of Palaeoproterozoic grains were likely derived from the Indian craton. The potential source rock of the 930–800 Ma detrital zircons may be granitoid present in Greater Himalayan rocks themselves and the Aravalli Range, which has 870–800 Ma granitic rocks. The arc-type basement within the Himalayan–Tibet orogen recorded (900–600 Ma) igneous activity, which may depict a northeasterly extension of juvenile terranes in the Arabian–Nubian Shield. The granitoid of 800 Ma may be a potential source for 790 Ma detrital zircons owing to scatter in 206/238 dates. The 650–500 Ma zircon population suggests their derivation from the East African Orogen and Ross–Delamerian Orogen of Gondwana. The Cambrian–Ordovician magmatism during the Bhimphedian Orogeny and observed late Neoproterozoic to Ordovician detrital zircons have been derived to some extent from Greater Himalayan magmatic sources. We found no detrital zircon grains that cannot be explained as coming from local sources. One sample yielded a discordia lower intercept age of 15.6 ± 2.2 Ma, the age of melt crystallization.

Analysis of patterns of faulting and hydrogeology, stratigraphic and sedimentologic studies, and luminescence dating of aeolian deposits in China Lake basin provide new perspectives on the origins and development of Late Holocene dunes and sand ramps in the seismically active Indian Wells Valley of eastern California. Aeolian dune and sand sheet deposits were sourced from alluvial material derived from granitic rocks of the south-eastern Sierra Nevada and are concentrated in areas with sand-stabilizing phreatophyte vegetation influenced by high groundwater levels along the active oblique-normal Little Lake and Paxton Ranch faults, which locally form barriers to groundwater flow. Three episodes of sand accumulation are recognized (2.1 ± 0.1 to 2.0 ± 0.1 ka, 1.8 ± 0.2 to 1.6 ± 0.2 ka, and 1.2 ± 0.1 to 0.9 ± 0.1 ka) during conditions in which sediment supplied to the basin during periods of enhanced rainfall and runoff was subsequently reworked by wind into dunes and sand ramps at the transition to more arid periods. Understanding the role tectonics plays in influencing the hydrogeology of seismically active lake basins provides insights to accurately interpret landscape evolution and any inferences made on past hydroclimate variability in a region.

Situated between the North China Craton to the east and the Tarim Craton to the west, the northern Alxa area in westernmost Inner Mongolia in China occupies a key location for interpreting the late-stage tectonic evolution of the southern Central Asian Orogenic Belt. New LA-ICP-MS zircon U–Pb dating results reveal 282.2 ± 3.9 Ma gabbros and 216.3 ± 3.2 Ma granites from the Yagan metamorphic core complex in northern Alxa, NW China. The gabbros are characterized by low contents of Si, Na, K, Ti and P and high contents of Mg, Ca, Al and Fe. These gabbros have arc geochemical signatures with relative enrichments in large ion lithophile elements and depletions in high field strength elements, as well as negative εNd(t) (−0.91 to −0.54) and positive εHf(t) (2.59 to 6.37) values. These features indicate that a depleted mantle magma source metasomatized by subduction fluids/melts and contaminated by crustal materials was involved in the processes of magma migration and emplacement. The granites show high-K calc-alkaline and metaluminous to weakly peraluminous affinities, similar to A-type granites. They have positive εNd(t) (1.55 to 1.99) and εHf(t) (5.03 to 7.64) values. These features suggest that the granites were derived from the mixing of mantle and crustal sources and formed in a postcollisional tectonic setting. Considering previous studies, we infer that the final closure of the Palaeo-Asian Ocean in the central part of the southern Central Asian Orogenic Belt occurred in late Permian to Early–Middle Triassic times.

High-pressure low-temperature metamorphic sediments of the Phyllite–Quartzite unit sensu stricto and the Talea Ori group are investigated in the field, microstructurally and by U–Pb dating of detrital zircons to shed light on their palaeogeographic origin. Zircon age spectra with ages >450 Ma of the Phyllite–Quartzite unit sensu stricto indicate a palaeogeographic origin at the northern margin of East Gondwana. In contrast, the lower stratigraphic, siliciclastic formations of the Talea Ori group show a high number of well-rounded Cambrian to Early Carboniferous aged zircons and a Neoproterozoic zircon age spectrum with East Gondwana affinity. Based on the comparison of zircon age data, a possible distal sediment source is the Sakarya Zone at the southern active margin of Eurasia. To reconcile the zircon data with the geological observations we propose different alternative models, or a combination of these, including sediment transport from the Sakarya Zone and/or a westerly source towards the northern margin of Gondwana as well as terrane-displacement of the Sakarya Zone. Also, a palaeogeographic origin of the Talea Ori group at the southern active margin of Eurasia cannot be excluded. This alternative, however, would not be consistent with the usually assumed association of the Talea Ori group with the Plattenkalk unit characterized by a palaeogeographic origin at the northern margin of Gondwana.

Many orogens on the planet result from plate convergence involving subduction of a continental margin. The lithosphere is strongly deformed during mountain building involving subduction of a plate composed generally of accreted continental margin units and some fragments of downgoing oceanic crust and mantle. A complex deformation involving strong partitioning of deformation modes and kinematics produces crustal shortening, accompanied by crustal thickening. Partitioning depends on three main factors: (1) rheologic layering of the lithosphere; (2) interaction between tectonics and surface processes; (3) subduction kinematics and 3D geometry of continental margins (oblique convergence, shape of indenters). Here we present an original view and discussion on the impact of deformation partitioning on the structure and evolution of orogens by examining the Taiwan mountain belt as a case study. Major unsolved questions are addressed through geological observations from the Taiwan orogen and insights from analogue models integrating surface processes. Some of these questions include: What is the role played by décollements or weak zones in crustal deformation and what is the impact of structural heterogeneities inherited from the early extensional history of a rifted passive continental margin? What is the relationship between deep underplating, induced uplift and flow of crustal material during erosion (finite strain evolution during wedge growth)? Are syn-convergent normal faults an effect of deformation partitioning and erosion? What is the role of strain partitioning on the location of major seismogenic faults in active mountain belts? What can be learned about the long-term and the present-day evolution of Taiwan?

Eight latest Eocene to earliest Miocene stratigraphic surfaces have been identified in petroleum well data from the Taranaki Basin, New Zealand. These surfaces define seven regional sedimentary packages, of variable thickness and lithofacies, forming a mixed siliciclastic–carbonate system. The evolving tectonic setting, particularly the initial development of the Australian–Pacific convergent margin, controlled geographic, stratigraphic and facies variability. This tectonic signal overprinted a regional transgressive trend that culminated in latest Oligocene times. The earliest influence of active compressional tectonics is reflected in the preservation of latest Eocene – Early Oligocene deepwater sediments in the northern Taranaki Basin. Thickness patterns for all mid Oligocene units onwards show a shift in sedimentation to the eastern Taranaki Basin, controlled by reverse movement on the Taranaki Fault System. This resulted in the deposition of a thick sedimentary wedge, initially of coarse clastic sediments, later carbonate dominated, in the foredeep close to the fault. In contrast, Oligocene active normal faulting in a small sub-basin in the south may represent the most northerly evidence for rifting in southern Zealandia, related to Emerald Basin formation. The Early Miocene period saw a return to clastic-dominated deposition, the onset of regional regression and the southward propagation of compressional tectonics.

It is generally accepted that oceanic plate subduction has occurred along the eastern margin of Asia since about 500 Ma ago. Therefore, the Japanese Islands have a >500 Ma history of oceanic plate subduction in their geological records. In this paper, the accretionary history of the Japanese Islands is divided into six main stages based on the mode and nature of tectonic events and the temporal gaps in the development of accretionary processes. In the first stage, oceanic plate subduction and accretion started along the margin of Gondwana. After detachment of the North and South China blocks in Devonian time, accretionary complexes developed along island arcs offshore of the South and North China blocks. After the formation of back arc basins such as the Japan Sea, accretionary processes occurred only along the limited convergent margin, e.g. Nankai Trough. Detrital zircons of sandstones revealed the accretionary history of Japan. An evaluation of a comprehensive dataset on detrital zircon populations shows that the observed temporal gaps in the development of the Japanese accretionary complexes were closely related to the intensity of igneous activity in their provenance regions. Age distributions of detrital zircons in the accretionary complexes of Japan change before and after the Middle Triassic period, when the collision of the South and North China blocks occurred.

The Caledonides of Britain and Ireland include terranes attributed to both Laurentian and Gondwanan sources, separated along the Solway line. Gondwanan elements to the south have been variably assigned to the domains Ganderia and East Avalonia. The Midland Platform forms the core of East Avalonia but its provenance is poorly known. Laser ablation split-stream analysis yields information about detrital zircon provenance by providing simultaneous U–Pb and Lu–Hf data from the same ablated volume. A sample of Red Callavia Sandstone from uppermost Cambrian Stage 3 of the Midland Platform yields a U–Pb age spectrum dominated by Neoproterozoic and Palaeoproterozoic sources, resembling those in the Welsh Basin, the Meguma Terrane of Nova Scotia and NW Africa. Initial εHf values suggest that the Neoproterozoic zircon component was derived mainly from crustal sources < 2 Ga, and imply that the more evolved Palaeoproterozoic grains were transported into the basin from an older source terrane, probably the Eburnean Orogen of West Africa. A sample from Cambrian Stage 4 in the Bray Group of the Leinster–Lakesman Terrane shows, in contrast, a distribution of both U–Pb ages and εHf values closely similar to those of the Gander Terrane in Newfoundland and other terranes attributed to Ganderia, interpreted to be derived from the margin of Amazonia. East Avalonia is clearly distinct from Ganderia, but shows evidence for older crustal components not present in West Avalonia of Newfoundland. These three components of the Appalachian–Caledonide Orogen came from distinct sources on the margin of Cambrian Gondwana.

The volcanic rocks of the Şarkışla area in northeastern central Anatolia are associated with volcaniclastics, turbiditic limestones and pelagic-hemipelagic shales of Upper Cretaceous-Palaeocene age. A preliminary geochemical study was undertaken to constrain local tectonic models, and due to the variable altered nature of the volcanics, determine the lithological composition and magma type. Chemically the volcanics are an andesite-dominated suite of calc-alkali lavas, probably developed adjacent to an active continental margin in a local (ensialic back-arc?) basinal area. The volcanic activity was probably related to a postulated magmatic arc just south of the area during the early Tertiary.

The Dead Sea Transform (DST) accounts for ~105 km of left-lateral slip between the Arabian plate and the Sinai subplate since the Miocene. Paleoseismic studies along the Arava Valley segment of the DST suggest that late Quaternary deformation has been primarily concentrated along the axis of the transform valley. Here, we examine late Quaternary changes in drainage system characteristics and attribute them to recent tectonic deformation in this region. Field-based geomorphic mapping, topographic cross sections, and optically stimulated luminescence (OSL) dating of fluvial deposits were used to map and date recent changes in the fluvial characteristics of catchments along the western margin of the southern Arava. Our results reveal coeval migration of channels, consistent with tectonically induced surface tilting caused by north–south compressional deformation along the western margin of the transform valley. OSL dating indicates this tilting was initiated in the late Pleistocene and continued at least into the mid-Holocene. The late Quaternary tectonic deformation along the southern Arava segment of the DST is distributed across a wider zone than previously considered and extends out to the margins of the transform valley. We associate the inferred wider deformation zone to possible changes in the geometry of motion along the DST.

Palaeogeography is the representation of the past surface of the Earth. It provides the spatial context for investigating how the Earth evolves through time, how complex processes interact and the juxtaposition of spatial information. In hydrocarbon exploration, palaeogeographies have been used to map and investigate the juxtaposition, distribution and quality of play elements (source, reservoir, seal and trap), as boundary conditions for source-to-sink analysis, climate modelling and lithofacies retrodiction, but most commonly as the backdrop for presentations and montages. This paper demonstrates how palaeogeography has been and can be used within an exploration workflow to help mitigate exploration risk. A comprehensive workflow for building palaeogeographies is described which is designed to provide a standard approach that can be applied to a range of tasks in exploration and academia. This is drawn from an analysis of the history of palaeogeography and how it has been applied to exploration in the past and why. Map applications, resolution and content depend on where in the exploration and production (E&P) cycle the map is used. This is illustrated here through three case studies, from the strategic decisions of global new ventures exploration to the more detailed basin and petroleum analyses of regional asset teams evaluating basins and plays. Through this, the paper also addresses three commonly asked questions: (1) How can I use palaeogeography in my workflow? (2) How reliable are the maps? (3) How do I build a palaeogeography?

In the Netherlands, over 190 gas fields of varying size have been exploited, and 15% of these have shown seismicity. The prime cause for seismicity due to gas depletion is stress changes caused by pressure depletion and by differential compaction. The observed onset of induced seismicity due to gas depletion in the Netherlands occurs after a considerable pressure drop in the gas fields. Geomechanical studies show that both the delay in the onset of induced seismicity and the nonlinear increase in seismic moment observed for the induced seismicity in the Groningen field can be explained by a model of pressure depletion, if the faults causing the induced seismicity are not critically stressed at the onset of depletion. Our model shows concave patterns of log moment with time for individual faults. This suggests that the growth of future seismicity could well be more limited than would be inferred from extrapolation of the observed trend between production or compaction and seismicity. The geomechanical models predict that seismic moment increase should slow down significantly immediately after a production decrease, independently of the decay rate of the compaction model. These findings are in agreement with the observed reduced seismicity rates in the central area of the Groningen field immediately after production decrease on 17 January 2014. The geomechanical model findings therefore support scope for mitigating induced seismicity by adjusting rates of production and associated pressure change. These simplified models cannot serve as comprehensive models for predicting induced seismicity in any particular field. To this end, a more detailed field-specific study, taking into account the full complexity of reservoir geometry, depletion history and mechanical properties, is required.

A review of the sequence stratigraphic development of the Tertiary basins of the North and West Alpine Foreland domains shows that their structural and depositional history was episodically affected by brief tectonic phases. These were associated with intermittent deformation events induced by the collisional convergence and compressional coupling of the Apulian and Iberian microplates with the European Plate. The plate kinematics-related episodicity was essentially isochronously recorded in the basin fills of the Alpine Foreland region. These are generally correlative with changes in eustatic sea level. The ensuing correlative successions of so-called Cenozoic Rift and Foredeep (CRF) sequences and phases can be traced throughout the European Cenozoic Rift System and Alpine Foreland Basin. Their temporal correlation indicates that, apparently, the changes in the plate collision-related stress regime of the Alpine Foreland were repeatedly accompanied by coeval changes in eustatic sea level. To test and substantiate the validity of this inferred causal relationship between intraplate deposition, plate kinematics and eustacy, the tectono-sedimentary evolution of the basins of the Mediterranean plate-boundary zone has been analysed in conjunction with a review of the plate-boundary events in the North Atlantic. Within the uncertainty range of available datings, synchroneity could thus be demonstrated for the punctuated tectonostratigraphic development of basins of the western Mediterranean (comprising the Liguro-Provençal Basin, Valencia Trough, Sardinia Rift and Tyrrhenian Basin), the Apenninic-Calabrian Arc, the Betic domain (including the Alboran Basin) and the North and West Alpine Foreland regions. Similar temporal correlations of plate tectonicsrelated events near the Mid-Atlantic Ridge in the North Atlantic and tectonostratigraphic sequences and phases of the Alpino-Pyrenean Foreland basins are further evidence of a common causal mechanism. The driving mechanisms appear to have been the northward drift of Africa and the resulting mechanical coupling of Apulia and Iberia with the southern passive margin of Europe, as well as the stepwise opening of the North Atlantic and accompanying episodic plate re-organisations of the Mid-Atlantic Ridge.

A reconnaissance survey of part of western Cambodia has found quarries in and near the town of Pailin containing chert, basalt, volcaniclastic rocks, gabbro and serpentinite. Abandoned quarries contain chert and basalt clasts in a volcaniclastic matrix and may constitute a mélange. A new, recently active, quarry contains these rock units in close and coherent contact but they lack the serpentinitic matrix of the Thung Kabin Mélange of eastern Thailand. The rock units are in close contact and may best be described collectively as a dismembered ophiolite. The mélange–ophiolite association constitutes a 3 km wide, 20 km long E–W belt separating a northern 200 km2 block of the mainly amphibolitic Pailin Crystalline Complex from a southern area of Triassic submarine fan siliciclastic rocks. The cherts yield the first documented radiolarian fauna from Cambodia and include a moderately well-preserved Asselian–Sakmarian age fauna consisting of Pseudoalbaillella sakmarensis, Pseudoalbaillella scalprata morphotype scalprata, Pseudoalbaillella sp. cf. P. simplex, Pseudoalbaillella u-forma morphotype II, Pseudoalbaillella sp. cf. P. elegans, Pseudoalbaillella sp. cf. P. lomentaria, Albaillella sp., Pseudoalbaillella spp., Trilonche? sp., Latentifistularia gen. et sp. indet. and Entactinaria gen. et sp. indet. The Pailin ophiolitic rocks, mélange and volcanic rocks occur within a generally E–W-trending belt, which suggests that the Sa Kaeo Suture does not extend southeastwards paralleling the Thai–Cambodian border, nor extend under the Cardamom Mountains but, rather, extends eastwards into Cambodia and possibly then turns southwards along the strike of the Pursat–Kampot Fold Belt.