Both prosthetic and robotic research communities have tended to focus on hand/gripper development. However, the wrist unit could enable higher mobility of the end effector and thus more efficient and dexterous manipulation. The current state of the art in both prosthetic and robotic wrists is reviewed systematically, mainly concerning their kinematic structures and resultant capabilities. Further, by considering the biomechanical advantages of the human wrist, an evaluation including the mobility, stability, output capability, load capacity and flexibility of the current artificial wrists is conducted. With the pentagonal capability radar charts, the major limitations and challenges in the current development of artificial wrists are derived. This paper hence provides some useful insights for better robotic wrist design and development.

An unexpected path reversal is discovered for a serial robot with an offset-axis wrist over a finite range of proximity to the wrist singularity. This is replicated by a kinematic model. A prior spherical-wrist method transits the singularity with limited joint rate and acceleration under a constant rate of tool traversal. Accurate position is maintained by controlling a small deviation in orientation. Extensions to the method for an offset wrist (1) find the least-maximum deviation, (2) identify and locate where a path reversal occurs, and (3) use this point to control step size in a high-order predictor-correction path following procedure.

In the present paper, the kinematics of a three-degree-of-freedom spherical wrist is investigated. The wrist consists of a fixed base connected to a moving platform by three identical legs, each with a RRUR chain (R and U denote a revolute pair and a universal pair, respectively). For each leg, the first R pair is to be considered actuated. Although in previous works the kinematics synthesis of this architecture was carried out, no detailed studies were presented on the kinematic issues of the wrist. This paper presents the mobility analysis, the direct and inverse position kinematics, the differential kinematics of the manipulator including inspection on the jacobian matrix and the analysis of the singularities. The geometrical condition matched in case of mechanical interference between legs is addressed, too. A numerical example of the manipulator kinematics was performed to obtain the workspace, the condition number and the mechanical inteference condition.