Potentiometric titration analysis was used to examine the hydrolysis behavior of Fe2+ Fe3+, and Al3+ in pure solution and in mixture, in order to evaluate the potential for coprecipitation and mixed solid-phase formation. Mixtures of Fe3+ and Al3+ did not interact during neutralization; base consumed in their respective buffer regions was equivalent to the total metal added. Fe2+-Al3+ solutions, however, showed excess base consumption in the Al3+ buffer region, indicating hydrolysis of Fe2+ at lower than normal pH. Ferric/ferrous iron analyses of systems at the Al endpoint (pH 5.5) showed amounts of oxidized Fe equivalent to the excess base consumption (∼10% of total Fe), with substantial amounts of Fe2+ sorbed to or occluded within Al polymers present. Increased electrolyte levels or the presence of SO42- inhibited oxidation and sorption of Fe2+ on Al surfaces, suggesting that Fe hydrolysis and oxidation was catalyzed at the surfaces. Increasing Al3+: Fe2+ ratios in the titrated solutions also increased the amount of Fe2+ coprecipitation, supporting a surface-mediated reaction mechanism. Ferrous iron oxidation was sensitive to O2 levels, which also affected the amount of coprecipitation. These findings suggest that surface-facilitated oxidation of Fe2+ may be important in the formation of mixed Fe-Al mineral phases in dilute soil solutions.

The surface charges and the zeta potential of a Na-montmorillonite (Na-mont) and two pillared montmorillonite (MP1 and MP2) samples with different aluminum contents were determined by Potentiometric titrations and electrophoretic measurements. At pH >9 the two pillared montmorillonite samples showed zeta potentials similar to those of Na-mont, but at pH <8, the negative zeta potential shifted to lower negative values as the aluminum content increased. Sample MP1, which had a greater Al content, showed an isoelectric point (IEP) of 5.0–5.5. Titration curves obtained by acid-base Potentiometrie titration for sample MP1 showed a well-defined cross-over point at pH = 5.0, whereas this point was not observed for sample MP2 in the pH range studied. The results indicate, in principle, that both techniques can be used to characterize surface charges in this type of material. An attempt was also made to relate the data obtained from electrophoretic mobility and Potentiometrie titrations.