New machine-vision technologies like the John Deere See & Spray™ could provide the opportunity to reduce herbicide use by detecting weeds and target-spraying herbicides simultaneously. Experiments were conducted for 2 yr in Keiser, AR, and Greenville, MS, to compare residual herbicide timings and targeted spray applications versus traditional broadcast herbicide programs in glyphosate/glufosinate/dicamba-resistant soybean. Treatments utilized consistent herbicides and rates with a preemergence (PRE) application followed by an early postemergence (EPOST) dicamba application followed by a mid-postemergence (MPOST) glufosinate application. All treatments included a residual at PRE and excluded or included a residual EPOST and MPOST. Additionally, the herbicide application method was considered, with traditional broadcast applications, broadcasted residual + targeted applications of postemergence herbicides (dual tank), or targeted applications of all herbicides (single tank). Targeted applications provided comparable control to broadcast applications with a ≤1% decrease in efficacy and overall control ≥93% for Palmer amaranth, broadleaf signalgrass, morningglory species, and purslane species. Additionally, targeted sprays slightly reduced soybean injury by at most 5 percentage points across all evaluations, and these effects did not translate to a yield increase at harvest. The relationship between weed area and targeted sprayed area also indicates that nozzle angle can influence potential herbicide savings, with narrower nozzle angles spraying less area. On average, targeted sprays saved a range of 28.4% to 62.4% on postemergence herbicides. On the basis of these results, with specific machine settings, targeted application programs could reduce the amount of herbicide applied while providing weed control comparable to that of traditional broadcast applications.

Field experiments were conducted at Clayton and Rocky Mount, North Carolina, during the summer of 2020 to determine the growth and fecundity of Palmer amaranth plants that survived glufosinate with and without grass competition in soybean crops. Glufosinate (590 g ai ha−1) was applied at early postemergence (when Palmer amaranth plants were 5 cm tall), mid-postemergence (7–10 cm), and late postemergence (>10 cm) and at orthogonal combinations of those timings. Nontreated Palmer amaranth was grown in weedy (i.e., intraspecific and grass competition), weed-free in-crop (WFIC), and weed-free fallow (WFNC) conditions for comparisons. No Palmer amaranth plants survived the sequential glufosinate applications and control decreased as the plants were treated at a larger size in both experiments. The apical and circumferential growth rate of Palmer amaranth surviving glufosinate was reduced by more than 44% compared with the WFNC Palmer amaranth. The biomass of Palmer amaranth plants that survived glufosinate was reduced by more than 87% compared with the WFNC Palmer amaranth. The fecundity of Palmer amaranth that survived glufosinate was reduced by more than 70% compared with WFNC Palmer amaranth. Palmer amaranth plants that survived glufosinate were as fecund as the WFIC Palmer amaranth in both experiments in soybean fields. The results prove that despite the significant vegetative growth rate decrease of Palmer amaranth that survived glufosinate, plants can be as fecund as nontreated plants. The trends in growth and fecundity of Palmer amaranth that survives glufosinate with and without grass competition were similar. These results suggest that glufosinate-treated grass weeds may not reduce the growth or fecundity of Palmer amaranth that survives glufosinate.

Multiple herbicide–resistant (MHR) Palmer amaranth is among the most problematic summer annual broadleaf weeds in Nebraska and several other states. A new MHR corn cultivar (resistant to 2,4-D/glufosinate/glyphosate, also known as Enlist corn) has been commercially available in the United States since 2018. Growers are searching for herbicide programs for control and reduce seed production of MHR Palmer amaranth among Enlist corn crops. The objectives of this study were to evaluate herbicides applied preemergence, early postemergence, or preemergence followed by (fb) late postemergence for the management of MHR Palmer amaranth in Enlist corn fields and to assess their effect on Palmer amaranth biomass, density, seed production, and corn yield. Field experiments were conducted near Carleton, NE, in 2020 and 2021, in a grower’s field of Enlist corn infested with acetolactate synthase–inhibitor/atrazine/glyphosate–resistant Palmer amaranth. Herbicides applied preemergence, such as flufenacet/isoxaflutole/thiencarbazone-methyl, acetochlor/clopyralid/flumetsulam, or acetochlor/clopyralid/mesotrione, provided 75% to 99% control of Palmer amaranth 30 d after preemergence. Preemergence fb late postemergence herbicides resulted in 94% Palmer amaranth control 90 d after late postemergence, reduced weed density to 0 to 8 plants m−2 30 d after late postemergence, and reduced biomass to 2 to 14 g m−2 15 d after late postemergence compared to preemergence-only (59% control, 0 to 15 plants m−2, and 4 to 123 g m−2) and early postemergence–only herbicides (78% control, 6 to 30 plants m−2, and 8 to 25 g m−2). Based on contrast analysis, Palmer amaranth seed production was reduced to 14,050 seeds m–2 in preemergence fb late postemergence herbicide programs compared with 325,490 seed m–2 in preemergence-only and 376,750 seed m–2 in early postemergence–only programs. Based on orthogonal contrast, higher corn yield of 12,340 and 11,730 kg ha−1 was obtained with preemergence fb late postemergence herbicide programs compared with preemergence-only (10,840 and 11,510 kg ha−1) and early postemergence–only programs (10,850 and 10,030 kg ha−1) in 2020 and 2021, respectively.

A Palmer amaranth biotype (CT-Res) with resistance to glyphosate was recently confirmed in a pumpkin field in Connecticut. However, the underlying mechanisms conferring glyphosate resistance in this biotype is not known. The main objectives of this research were 1) to determine the effect of plant height (10, 20, and 30 cm) on glyphosate resistance levels in CT-Res Palmer amaranth biotype, and 2) to investigate whether the target site–based mechanisms confer glyphosate resistance. To achieve these objectives, progeny seeds of the CT-Res biotype after two generations of recurrent selection with glyphosate (6,720 g ae ha−1) were used. Similarly, known glyphosate-susceptible Palmer amaranth biotypes from Kansas (KS-Sus) and Alabama (AL-Sus) were included. Results from greenhouse dose-response studies revealed that CT-Res Palmer amaranth biotype had 69-, 64-, and 54-fold resistance to glyphosate as compared with the KS-Sus biotype when treated at heights of 10, 20, and 30 cm, respectively. Sequence analysis of the EPSPS gene revealed no point mutations at the Pro106 and Thr102 residues in the CT-Res Palmer amaranth biotype. Quantitative polymerase chain reaction analysis revealed that the CT-Res biotype had 33 to 111 relative copies of the EPSPS gene compared with the AL-Sus biotype. All these results suggest that the EPSPS gene amplification endows a high level of glyphosate resistance in the GR Palmer amaranth biotype from Connecticut. Because of the lack of control with glyphosate, growers should adopt the use of effective alternative preemergence and postemergence herbicides in conjunction with other cultural and mechanical tactics to mitigate the further spread of GR Palmer amaranth in Connecticut.

The herbicides that inhibit very-long-chain fatty acid (VLCFA) elongases are primarily used for residual weed control in corn, barley, oat, sorghum, soybean, sugarcane, certain vegetable crops, and wheat production fields in the United States. They act primarily by inhibiting shoot development of susceptible species, preventing weed emergence and growth. The objectives of this review were to summarize 1) the chemical family of VLCFA-inhibiting herbicides and their use in the United States, 2) the VLCFA biosynthesis in plants and their site of action, 3) VLCFA-inhibitor resistant weeds and their mechanism of resistance, and 4) the future of VLCFA-inhibiting herbicides. After their reclassification as Group 15 herbicides to include shoot growth-inhibiting herbicides (Group 8), the VLCFA-inhibiting herbicides are currently represented by eight chemical families (benzofurans, thiocarbamates, α-chloroacetamides, α-oxyacetamides, azolyl-carboxamides, isoxazolines, α-thioacetamides, and oxiranes). On average, VLCFA-inhibiting herbicides are applied once a year to both corn and soybean crops in the United States with acetochlor and S-metolachlor being the most used VLCFA-inhibiting herbicides in corn and soybean production, respectively. The site of action of Group 15 herbicides results from inhibition of the VLCFA synthase, which is encoded by several fatty acid elongase (FAE1)-like genes in VLCFA elongase complex in an endoplasmic reticulum. The VLCFA synthase is a condensing enzyme, and relies on a conserved, reactive cysteinyl sulfur in its active site that performs a nucleophilic attack on either the natural substrate (fatty acyl-CoA) or the herbicide. As of August 2023, 13 weed species have been documented to be resistant to VLCFA inhibitors, including 11 monocot weeds and two dicot weeds (Palmer amaranth and waterhemp). The isoxazolines (pyroxasulfone and fenoxasulfone) are the most recently (2014) discovered VLCFA-inhibiting herbicides. Although the intensity of VLCFA-inhibitor-directed discovery efforts has decreased over the past decade, this biochemical pathway remains a viable mechanistic target for the discovery of herbicide premixes and a valuable component of them.

Herbicide resistance in weeds significantly threatens crop production in the United States. The introduction of dicamba-resistant soybean and cotton stacked with other herbicide tolerance traits has provided farmers with the flexibility of having multiple herbicide options to diversify their weed management practices and delay resistance evolution. XtendiMax® herbicide with VaporGrip® Technology is a dicamba formulation registered for use on dicamba-resistant soybean and cotton crops by the U.S. Environmental Protection Agency (EPA). One of the terms of its registration includes an evaluation of inquiries on reduced weed control efficacy by growers or users of XtendiMax for suspected weed resistance. A total of 3,555 product performance inquiries (PPIs) were received from 2018 to 2021 regarding reduced weed control efficacy by dicamba. Following the criteria recommended by EPA for screening of suspected resistance in the field, a total of 103 weed accessions from 63 counties in 13 states were collected for greenhouse testing over those 4 yr. Weed accessions for greenhouse testing were collected only in states where resistance to dicamba was not yet confirmed in the weed species under investigation. The accessions, which consisted primarily of waterhemp and Palmer amaranth, were treated with dicamba at rates of 560 g ae ha−1 and 1,120 g ae ha−1. All weed accessions, except for one accession each of Palmer amaranth and waterhemp, were controlled by ≥90% with dicamba at 21 d after treatment in the greenhouse.

Herbicide resistance in Palmer amaranth and waterhemp is on the rise and poses a great concern to growers in the United States. A multistate screening was conducted for these two weed species in the United States to assess their sensitivity to glufosinate, dicamba, and 2,4-D. The screening was designed to understand the weed sensitivity landscape and emerging trends in resistance evolution by testing each herbicide at its respective label rate and at half the label rate. A total of 303 weed seed accessions from 21 states representing 162 Palmer amaranth and 141 waterhemp seeds were collected from grower fields in 2019 and screened in greenhouse conditions. Statistical power of different sample sizes and probability of survivors in each accession were estimated for each species and herbicide treatment. Overall, the efficacy of glufosinate, dicamba, and 2,4-D against all these accessions was excellent, with greater than 90% average injury. The variability in herbicide injury, if any, was greater with half the label rate of 2,4-D in some Palmer amaranth accessions, while waterhemp accessions had exhibited variable sensitivity with half the label rate of dicamba and glufosinate. The study highlights the value of monitoring weeds for herbicide sensitivity across broader landscape and the importance of glufosinate, dicamba, and 2,4-D herbicides in managing troublesome weeds as part of a diversified weed control program integrated with other chemical, mechanical and cultural practices.

Cotton and soybean growers were offered new technologies in 2016, expanding in-crop herbicide options to include dicamba or 2,4-D. Within 3 yr of commercialization, dicamba use in these crops increased 10-fold, and growers began to report Palmer amaranth escapes in dicamba-tolerant production systems in western Tennessee. In 2020, Palmer amaranth seed was collected from eight Tennessee locations where growers witnessed poor control following dicamba. Greenhouse experiments were conducted to evaluate the response of these Palmer amaranth populations to dicamba. In 2021, field experiments were conducted on two tentative dicamba-susceptible populations in Georgia, on three confirmed dicamba-resistant populations in Tennessee, and on a tentative dicamba-susceptible population in Texas to evaluate cotton response following dicamba and to examine if malathion insecticide (a cytochrome P450 inhibitor) would improve weed control and not reduce cotton yield when applied in conjunction with dicamba. Palmer amaranth populations collected in 2020 survived dicamba in the greenhouse at 1, 2, and 4 times the labeled rate. Five Palmer amaranth populations exhibited 15% to 26% survival to the labeled dicamba rate (560 g ha−1) in the greenhouse. These findings were reinforced in the field when research on three of those populations in 2021 showed 55% control with the labeled dicamba rate and 69% control with 2 times the labeled rate. This demonstrates that the dicamba resistance allele or alleles were passed between generations. This result was not consistent in the Macon County, GA, or Worth County, GA, locations, where malathion improved dicamba control of 15- to 38-cm-tall Palmer amaranth. Cotton injury was observed when malathion was applied in combination with dicamba. These results further document the evolution of dicamba-resistant Palmer amaranth in Tennessee. Moreover, the nonreversal of resistance phenotype by malathion may suggest that the resistance mechanism is something other than metabolism.

With the increase in hectares planted to auxin-resistant cotton, the number of preplant, at-plant, and postplant applications of dicamba and 2,4-D choline to aid in the control of troublesome broadleaf weeds, including glyphosate-resistant Palmer amaranth, has increased. More dicamba and 2,4-D choline applications mean an increased risk of off-target movement. Field studies were conducted in 2019 to 2021 at the Texas Tech University New Deal Research Farm to evaluate dicamba-resistant cotton response to various rates of 2,4-D choline when applied at four growth stages (first square [FS] + 2 wk, first bloom [FB], FB + 2 wk, and FB + 4 wk). Applications of 2,4-D choline were applied at 1,060 (1X), 106 (1/10X), 21 (1/50X), 10.6 (1/100X), 2.1 (1/500X), and 1.06 (1/1000X) g ae ha−1 to Deltapine 1822 XF cotton. Relative to the nontreated control, yield losses were observed in all years at FS + 2 wk and FB from rates of 2,4-D choline ≥ 1/100X. At the FB + 4 wk application, only the 1X rate of 2,4-D choline resulted in a yield reduction in all three years. Micronaire, fiber length, and uniformity were negatively influenced by the 1/10X and 1X rates of 2,4-D choline at various timings in 2019, 2020, and 2021. In addition, short fiber content, neps, and seed coat neps increased where micronaire, fiber length, and uniformity were negatively impacted.

The threat of herbicide-resistant weed species, such as Palmer amaranth, has driven the development of robust weed management programs that rely on more than chemicals for weed control. Previous research has shown that zero-tolerance weed thresholds, cover crops, deep tillage, and diverse herbicide programs are effective strategies for controlling Palmer amaranth. Unfortunately, research investigating the integration of all four of these weed management strategies in a system is lacking. To better leverage these integrated weed management strategies in cotton production systems, a long-term study was initiated in fall 2018 near Marianna, AR, with zero tolerance, deep tillage, a cereal rye cover crop, and either a dicamba or non-dicamba in-crop herbicide program as factors. Results found that total Palmer amaranth emergence was reduced 76% as the result of deep tillage in 2019 and, in the absence of a zero-tolerance strategy, 73% in 2020. In the absence of a zero-tolerance strategy, the combination of a non–cover crop strategy and dicamba herbicide program decreased total Palmer amaranth emergence by 73%, while the combination of a cover crop strategy and dicamba herbicide program decreased total Palmer amaranth emergence by 78% compared to the combination of a cover crop and non-dicamba herbicide program. Under a zero-tolerance strategy in 2019, tillage reduced cotton yield by 12% and partial returns by US$370 ha−1. In 2020, tillage reduced cotton yield by 14% and partial returns of US$371 ha−1 under a non-zero-tolerance strategy, while a 12% yield reduction and a US$260 ha−1 decrease in partial returns were observed under a zero-tolerance strategy. In 2019, the non-dicamba program resulted in greater partial returns than the dicamba in-crop program because of greater yield and lower program costs. However, in 2020, partial returns were greater for the dicamba in-crop herbicide program owing to greater yields achieved by this program.

Small-seeded vegetable crop production is challenged by poor emergence, stand establishment and canopy development, as well as a lack of effective weed control options. The potential use of plant growth regulators such as gibberellic acid (GA) could enhance early emergence and growth rates while potentially synchronizing weed germination with control tactics. In response, a controlled environment study was conducted to investigate the effects of GA on garden beet, cabbage, carrot, and onion. At 7 d after seeding (DAS) carrot emergence was greater when carrot seeds were treated with 2, 4, 8, 16, or 64 ppm GA compared with nontreated seeds. Total carrot emergence over the study period was 14% greater when seeds were treated with 4 ppm GA compared with nontreated seeds. Treatment of cabbage with as low as 2 to 4 ppm GA increased cabbage emergence rate and total plant emergence over the study period relative to nontreated seeds. Onion response to GA treatment was variable and unremarkable and was hypothesized to be influenced by seed dormancy because emergence was also low with the nontreated seeds. The GA rates that stimulated vegetable crop seed germination and emergence were then explored with three common weed species to determine whether a similar response was observed. If so, GA could be used to stimulate weed emergence in synchrony with management tactics. Palmer amaranth emergence was strongly affected by GA treatment, whereby the total number of emerged plants was 48% greater when 4 ppm GA was applied than in the nontreated check. Velvetleaf emergence at 3 DAS with the 4 and 8 ppm GA was 2.9 and 3.0 plants pot−1, respectively, compared to no emergence in the nontreated pots. Redroot pigweed emergence was not affected by GA treatment at any rate.

Herbicide-resistant Palmer amaranth is a troublesome weed in several agronomic crops and is a relatively new challenge to dry bean production in western Nebraska. Objectives were to evaluate preemergence (PRE) and postemergence (POST) herbicides for control of acetolactate synthase–resistant Palmer amaranth and their effect on Palmer amaranth density and biomass as well as dry bean injury and yield in western Nebraska. Field experiments were conducted in 2017 and 2019 near Scottsbluff, NE. The experiments were arranged as a two-factor strip-plot design. The strip-plot factor consisted of no-PRE or pendimethalin (1,070 g ai ha–1) + dimethenamid-P (790 g ai h–1) applied PRE. The main-plot factor was POST herbicides, which consisted of various mixtures of imazamox, bentazon, or fomesafen applied in a single or sequential application at labeled rates, and reduced rates of imazamox (9 g ai ha–1) + bentazon (314 g ai ha–1) + fomesafen (70 g ai ha–1) applied in single or sequential (two or three) applications. PRE herbicides reduced Palmer amaranth density and biomass during both years and increased dry bean yield in 2017. POST treatments containing fomesafen improved Palmer amaranth control compared with treatments containing imazamox and bentazon only. The sequential-application reduced-rate POST system did not improve Palmer amaranth control compared to one POST application containing fomesafen at a labeled rate in either year. Using pendimethalin + dimethenamid-P PRE followed by POST treatments containing imazamox + bentazon + fomesafen at a labeled rate provided 86% and 99% Palmer amaranth control in 2017 and 2019, respectively.

A chloroacetamide herbicide by application timing factorial experiment was conducted in 2017 and 2018 in Mississippi to investigate chloroacetamide use in a dicamba-based Palmer amaranth management program in cotton production. Herbicides used were S-metolachlor or acetochlor, and application timings were preemergence, preemergence followed by (fb) early postemergence, preemergence fb late postemergence, early postemergence alone, late postemergence alone, and early postemergence fb late postemergence. Dicamba was included in all preemergence applications, and dicamba plus glyphosate was included with all postemergence applications. Differences in cotton and weed response due to chloroacetamide type were minimal, and cotton injury at 14 d after late postemergence application was less than 10% for all application timings. Late-season weed control was reduced up to 30% and 53% if chloroacetamide application occurred preemergence or late postemergence only, respectively. Late-season weed densities were minimized if multiple applications were used instead of a single application. Cotton height was reduced by up to 23% if a single application was made late postemergence relative to other application timings. Chloroacetamide application at any timing except preemergence alone minimized late-season weed biomass. Yield was maximized by any treatment involving multiple applications or early postemergence alone, whereas applications preemergence or late postemergence alone resulted in up to 56% and 27% yield losses, respectively. While no yield loss was reported by delaying the first of sequential applications until early postemergence, forgoing a preemergence application is not advisable given the multiple factors that may delay timely postemergence applications such as inclement weather.

Laboratory and greenhouse studies were conducted to evaluate the effects of chemical treatments applied to Palmer amaranth seeds or gynoecious plants that retain seeds to determine seed germination and quality. Treatments applied to physiologically mature Palmer amaranth seed included acifluorfen, dicamba, ethephon, flumioxazin, fomesafen, halosulfuron, linuron, metribuzin, oryzalin, pendimethalin, pyroxasulfone, S-metolachlor, saflufenacil, trifluralin, and 2,4-D plus crop oil concentrate applied at 1× and 2× the suggested use rates from the manufacturer. Germination was reduced by 20% when 2,4-D was used, 15% when dicamba was used, and 13% when halosulfuron and pyroxasulfone were used. Use of dicamba, ethephon, halosulfuron, oryzalin, trifluralin, and 2,4-D resulted in decreased seedling length by an average of at least 50%. Due to the observed effect of dicamba, ethephon, halosulfuron, oryzalin, trifluralin, and 2,4-D, these treatments were applied to gynoecious Palmer amaranth inflorescence at the 2× registered application rates to evaluate their effects on progeny seed. Dicamba use resulted in a 24% decrease in seed germination, whereas all other treatment results were similar to those of the control. Crush tests showed that seed viability was greater than 95%, thus dicamba did not have a strong effect on seed viability. No treatments applied to Palmer amaranth inflorescence affected average seedling length; therefore, chemical treatments did not affect the quality of seeds that germinated.

Palmer amaranth is the latest pigweed species documented in Connecticut; it was identified there in 2019. In a single-dose experiment, the Connecticut Palmer amaranth biotype survived the field-use rates of glyphosate (840 g ae ha−1) and imazaquin (137 g ai ha−1) herbicides applied separately. Additional experiments were conducted to (1) determine the level of resistance to glyphosate and acetolactate synthase (ALS) inhibitors in the Connecticut-resistant (CT-Res) biotype using whole-plant dose-response bioassays, and (2) evaluate the response of the CT-Res biotype to POST herbicides commonly used in Connecticut cropping systems. Based on the effective dose required for 90% control (ED90), the CT-Res biotype was 10-fold resistant to glyphosate when compared with the Kansas-susceptible (KS-Sus) biotype. Furthermore, the CT-Res biotype was highly resistant to ALS-inhibitor herbicides; only 18% control was achieved with 2,196 g ai ha−1 imazaquin. The CT-Res biotype was also cross-resistant to other ALS-inhibitor herbicides, including chlorimuron-ethyl (13.1 g ai ha−1), halosulfuron-methyl (70 g ai ha−1), and sulfometuron-methyl (392 g ai ha−1). The CT-Res Palmer amaranth was controlled 75% to 100% at 21 d after treatment (DAT) with POST applications of 2,4-D (386 g ae ha−1), carfentrazone-ethyl (34 g ai ha−1), clopyralid (280 g ae ha−1), dicamba (280 g ae ha−1), glufosinate (595 g ai ha−1), lactofen (220 g ai ha−1), oxyfluorfen (1,121g ai ha−1), and mesotrione (105 g ai ha−1) herbicides. Atrazine (2,240 g ai ha−1) controlled the CT-Res biotype only 52%, suggesting the biotype is resistant to this herbicide as well. Here we report the first case of Palmer amaranth from Connecticut with multiple resistance to glyphosate and ALS inhibitors. Growers should proactively use all available weed control tactics, including the use of effective PRE and alternative POST herbicides (tested in this study), for effective control of the CT-Res biotype.

Weed control of paraquat can be erratic and may be attributable to differing species sensitivity and/or environmental factors for which minor guidance is available on commercial labels. Therefore, the objectives of this research were to quantify selectivity of paraquat across select weed species and the influence of environmental factors. Experiments were performed under controlled conditions in the greenhouse and growth chamber. Compared with purple deadnettle (dose necessary to reduce shoot biomass by 50% = 39 g ai ha−1), waterhemp, Palmer amaranth, giant ragweed, and horseweed were 4.9, 3.3, 1.9, and 1.3 times more sensitive to paraquat, respectively. The injury progression rate over 3 d after treatment (DAT) was a more accurate predictor of final efficacy at 14 DAT than the lag phase until symptoms first appeared. For example, at the 17.5 g ha−1 dose, the injury rate of waterhemp and Palmer amaranth was, on average, 3.6 times greater than that of horseweed and purple deadnettle. The influence of various environmental factors on paraquat efficacy was weed specific. Applications made at sunrise improved control of purple deadnettle over applications at solar noon or sunset. Lower light intensities (200 or 600 μmol m−2 s−1) surrounding the time of application improved control of waterhemp and horseweed more than 1,000 μmol m−2 s−1. Day/night temperatures of 27/16 C improved horseweed and purple deadnettle control compared with day/night temperatures of 18/13 C. Though control was positively associated with injury rates in the application time of day and temperature experiments, a negative relationship was observed for waterhemp in the light-intensity experiment. Thus, although there are conditions that enhance paraquat efficacy, the specific target species must also be considered. These results advocate paraquat dose recommendations, currently based on weed height, be expanded to address sensitivity differences among weeds. Moreover, these findings contrast with paraquat labels stating temperatures of 13 C or lower do not reduce paraquat efficacy.

Failure to control Palmer amaranth with glyphosate and protoporphyrinogen IX oxidase (PPO)-inhibitor herbicides was reported across southwestern Nebraska in 2017. The objectives of this study were to 1) confirm and 2) validate glyphosate and PPO-inhibitor (fomesafen and lactofen) resistance in 51 Palmer amaranth accessions from southwestern Nebraska using genotypic and whole-plant phenotypic assay correlations and cluster analysis, and 3) determine which agronomic practices might be influencing glyphosate resistance in Palmer amaranth accessions in that location. Based on genotypic assay, 88% of 51 accessions contained at least one individual with amplification (>2 copies) of the 5-enolypyruvyl-shikimate-3-phosphate synthase (EPSPS) gene, which confers glyphosate resistance; and/or a mutation in the PPX2 gene, either ΔG210 or R128G, which endows PPO-inhibitor resistance in Palmer amaranth. Cluster analysis and high correlation (0.83) between genotypic and phenotypic assays demonstrated that EPSPS gene amplification is the main glyphosate resistance mechanism in Palmer amaranth accessions from southwestern Nebraska. In contrast, there was poor association between genotypic and phenotypic responses for PPO-inhibitor resistance, which was attributed to segregation for PPO-inhibitor resistance within these accessions and/or the methodology that was adopted herein. Genotypic assays can expedite the process of confirming known glyphosate and PPO-inhibitor resistance mechanisms in Palmer amaranth from southwestern Nebraska and other locations. Phenotypic assays are also a robust method for confirming glyphosate resistance but not necessarily PPO-inhibitor resistance in Palmer amaranth. Moreover, random forest analysis of glyphosate resistance in Palmer amaranth indicated that EPSPS gene amplification, county, and current and previous crops are the main factors influencing glyphosate resistance within that geographic area. Most glyphosate-susceptible Palmer amaranth accessions were found in a few counties in areas with high crop diversity. Results presented here confirm the spread of glyphosate resistance and PPO-inhibitor resistance in Palmer amaranth accessions from southwestern Nebraska and demonstrate that less diverse cropping systems are an important driver of herbicide resistance evolution in Palmer amaranth.

Palmer amaranth is one of the most troublesome weeds of soybean in the United States. To effectively control this weed it is necessary to optimize timing of PRE residual herbicides to mitigate Palmer amaranth emergence. Field studies were conducted in 5 site-years to assess the effect of application timing 12 to 16 d prior to planting (preplant) and at planting (PRE) on soybean injury and longevity of Palmer amaranth control using five residual herbicide treatments. A reduction in longevity of Palmer amaranth control was observed when S-metolachlor + metribuzin and flumioxazin + chlorimuron-ethyl were applied preplant vs. PRE in 2 of the 5 site years. Sulfentrazone, sulfentrazone + cloransulam-methyl, and saflufenacil + dimethenamid-P + pyroxasulfone + metribuzin did not reduce longevity of Palmer amaranth control when applied preplant vs. PRE in all 5 site-years. Visible estimates of soybean injury were lower at 21 d after planting when herbicides were applied 12 to 16 d preplant vs. PRE. These findings suggest that preplant applications can be used to reduce the potential for crop injury and may not result in reduced longevity of control when herbicides with a prolonged residual activity are used. Preplant herbicides increase the likelihood of the residuals being activated prior to subsequent weed emergence as opposed to PRE herbicides applied at soybean planting.

Dicamba and 2,4-D systems control many problematic weeds; however, drift to susceptible crops can be a concern in diverse production areas. Glufosinate-based systems are an alternative, but current recommended rates of glufosinate can result in variable control. Research was conducted in 2017 and 2018 to investigate the optimum time interval between sequential glufosinate applications and determine if the addition of glyphosate with glufosinate is beneficial for controlling Palmer amaranth and annual grasses in cotton. The interval between sequential applications (1, 3, 5, 7, 10, or 14 d or no second spray) was the whole plot and herbicide option (glufosinate or glufosinate plus glyphosate) was the subplot. Combined over herbicides, Palmer amaranth 15- to 20-cm tall (at four locations) was controlled 98% to 99% with sequential intervals of 1 to 7 d compared with 70% to 88% with intervals of 10 or 14 d. Lowest biomass weight and population densities were noted with 1- to 7-d intervals. Large crabgrass 15- to 20-cm tall (at five locations) was controlled 93% to 98% with glufosinate applications 3- to 7-d apart as compared with 76% to 81% with applications 10- to 14-d apart. Lowest biomass weights were observed with 1- to 7-d intervals. When glufosinate controlled grass less than 93%, adding glyphosate was beneficial. Neither interval between sequential applications nor herbicide option influenced cotton yield. Shorter time intervals between sequential application and including glyphosate can improve the effectiveness of a glufosinate-based system in managing Palmer amaranth and large crabgrass.

Management options are needed to limit sweetpotato yield loss due to weeds. Greenhouse studies were conducted in 2018 in Greensboro, NC, and in the field from 2016 to 2018 in Clinton, NC, to evaluate the effect of bicyclopyrone on sweetpotato and Palmer amaranth (field only). In greenhouse studies, Covington and NC04-531 clones were treated with bicyclopyrone (0, 25, 50, 100, or 150 g ai ha−1) either preplant (PP; i.e., immediately before transplanting) or post-transplant (PT; i.e., on the same day after transplanting). Sweetpotato plant injury and stunting increased, and vine length and shoot dry weight decreased with increasing rate of bicyclopyrone regardless of clone or application timing. In field studies, Beauregard (2016) or Covington (2017 and 2018) sweetpotato clones were treated with bicyclopyrone at 50 g ha−1 PP, flumioxazin at 107 g ai ha−1 PP, bicyclopyrone at 50 or 100 g ha−1 PP followed by (fb) S-metolachlor at 800 g ai ha−1 PT, flumioxazin at 107 g ha−1 PP fb S-metolachlor at 800 g ha−1 PT, flumioxazin at 107 g ha−1 PP fb S-metolachlor at 800 g ha−1 PT fb bicyclopyrone at 50 g ha−1 PT-directed, and clomazone at 420 g ai ha−1 PP fb S-metolachlor at 800 g ha−1 PT. Bicyclopyrone PP at 100 g ha−1 fb S-metolachlor PT caused 33% or greater crop stunting and 44% or greater marketable yield reduction compared with the weed-free check in 2016 (Beauregard) and 2017 (Covington). Bicyclopyrone PP at 50 g ha−1 alone or fb S-metolachlor PT resulted in 12% or less injury and similar no. 1 and jumbo yields as the weed-free check in 2 of 3 yr. Injury to Covington from bicyclopyrone PT-directed was 4% or less at 4 or 5 wk after transplanting and marketable yield was similar to that of the weed-free check in 2017 and 2018.