A new class of switchable bandpass filter using PIN diodes is presented in this paper. The design aims at achieving a multistate switchable bandpass filtering characteristics between the passbands centered at 2.4, 3.5, and 5.2 GHz. The proposed filter is designed by assembling two λg/2 open-ended and four short-ended λg/4 uniform impedance resonators. The open-ended resonator generates a fixed passband at 3.5 GHz, whereas the short-ended resonators loaded with PIN diodes are independently controlling the ON and OFF characteristics of the passband centered at 2.4 and 5.2 GHz. The transmission zeros around each passband are produced without employing any additional circuit. The filter sample is fabricated and tested for experimental verification. A good agreement has been observed between EM-simulated and measured results. The designed filter has a compact size of 0.20 λg × 0.15 λg at 2.4 GHz.

The paper proposes a new design for a single-arm, rectangular, spiral antenna (SARSA) with a wide azimuth space coverage. The antenna, operating at around 3.3 GHz, is capable of steering the beam in four separate directions in the azimuth plane. Only three DC signals are required to control the seven PIN diodes attached along the spiral arm. The antenna has a 200-MHz-bandwidth around 3.3 GHz with stable maximum beam directions that are defined by setting of the switches. Considerations required in selecting switch positions when designing such antennas for other frequencies, are presented. The measured return loss, radiation pattern and gain, all have close correlation with the simulation results. A detailed comparison of our design with those already proposed in the literature is given.