A compact microstrip eight-channel diplexer based on quad-mode stepped impedance resonator (QMSIR) is proposed in this paper. The proposed diplexer is composed by two second-order quad-band bandpass filters (BPFs) and common-port distributed coupling matching circuit. Each quad-band BPF is formed by two coupled-QMSIRs controlling the passband characteristics. By introducing multiple coupling paths between input and output ports, the isolation between the eight channels is performed. For demonstration, an eight-channel diplexer based on QMSIR is designed and fabricated with microstrip technology. The use of the QMSIR can lead to significant size reduction for the multiplexer, this is because the required resonator number is reduced. As a result, the diplexer occupies a compact size of 0.083λ2, which is smaller than most of the eight-channel diplexers that have been proposed. And the 3 dB fractional bandwidth is 97% (2.5–7.2 GHz). Measurement results correlate well with the simulated predictions, showing that a good isolation of better than 20 dB and upper stopband of better than 10 dB.

This article presents an ultrawide bandpass filter structure developed along a notch band using a small rectangular impedance resonator. The proposed filter structure consists of a coupled rectangular resonator (CRR), open stub, and composited split ring resonator (CSRR) at the bottom of the structure. In-band and out-of-band properties are improved by the CRR and open stub. The notch band is obtained by placing CSRR below the rectangular resonator. A filter with a compact size of 0.15 × 0.10 λg is obtained at a lowered cutoff frequency of 3.0 GHz, where λg is the corresponding guided wavelength. The proposed structure has been constructed on 5880 Rogers substrate with a thickness of 0.787 mm and a dielectric constant of 2.2. Additionally, equivalent lumped parameters were obtained, and a lumped equivalent circuit was created to explain how the suggested filter operated. The Electromagnetic (EM)-simulated results are in good agreement with the circuit-simulated and measured result. The various machine learning approaches such as artificial neural network, K-nearest neighbour, decision tree, random forest (RF), and extreme gradient boosting algorithms are applied to optimize the design, in which RF algorithms achieve more than 90% accuracy for predicting the S parameters of the ultrawideband filter.

Surface acoustic wave (SAW) resonator-based compact multi-band bandpass filters (BPFs) with quasi-elliptic transfer functions (TF) and reconfigurable reflective or quasi-reflectionless characteristics are reported. They utilize bandpass-type multi-resonant acoustic wave lumped resonator (AWLR) stages, shaped by multiple in-parallel cascaded distinct SAW resonators and one lumped-element (LE) inductor. By incorporating resistively-terminated bandstop-type AWLR stages at the Radio Frequency (RF) input/output, their power reflection response can be tailored to be quasi-reflectionless. The multi-band BPF can be expanded to TF with: i) a high number of passbands by increasing the number of the acoustic wave resonators (AWRs) in the AWLR stages, and ii) higher selectivity by cascading bandpass-type AWLRs stages using impedance inverters, and iii) symmetric quasi-reflectionless characteristics. For N in-series cascaded stages, each comprising K distinct AWRs, K passbands with enhanced fractional bandwidth (FBW) can be created, with overall TF having N•(K) poles and N•(K+1) transmission zeros (TZs). The operating principles of the multi-band BPF concept are provided through detailed design examples. The concept is demonstrated through detailed design examples, with three multi-band BPF prototypes manufactured and characterized, exhibiting dual-/triple-band centered between 1029.8 and 1039.9 MHz, FBWs> 0.4kt2, and effective Q-factors> 5,000. The quasi-reflectionless prototype showed a maximum reflection of -11.5 dB.

A fourth-order bandpass filter with dual-wide passbands is proposed in this article. The novelty of the proposed work is the realization of a dual-band bandpass filter with closely spaced passbands, wide passband bandwidth, high rejection between the passbands, using a novel combination of open stub tapped series coupled lines (CLs) and shunt transmission line loaded with end connected CLs. The characteristics of the proposed dual-wideband bandpass filter are investigated by adopting even–odd mode analysis. The transmission zeros generated by the transmission line loaded with an end-connected CL and open stub are utilized to achieve a high skirt rate. A rejection better than 55 dB is achieved with a single transmission zero between the two passbands indicating high isolation and close passbands. The dual-wideband filter is designed and manufactured to operate at 1.33 and 2.32 GHz. The experimented 3-dB fractional bandwidths of the two pass frequency bands are 40.6% and 24.13%. The proposed filter’s tested frequency responses agree well with simulated results. The proposed device can be used in various applications such as telecommunications, satellite communications, radar systems, imaging, and spectroscopy.

This paper proposes an air-filled substrate integrated waveguide (AFSIW) bandpass filter with a miniaturized non-resonant node (NRN). The NRN structure is introduced between the three resonators, and its size is smaller than the resonator size, which can realize the NRN structure’s miniaturization and reduce the model’s size. The NRN size of this filter is 41% of the NRN size of the existing AFSIW filter. This filter also introduces a transmission zero (TZ) above the passband. The measured results show that the filter’s center frequency is 20.73 GHz, and the bandwidth is 0.86 GHz. The insertion loss in the passband is 0.95 dB, and the return loss is better than 23 dB. Due to the TZ in the upper stopband, the AFSIW filter obtained good selectivity.

In this article, a new microstrip dual-narrowband bandpass filter employing parallel-coupled transmission lines and open stubs is presented, investigated, and fabricated. The proposed dual-narrowband bandpass filter is analyzed and its exact scattering parameters are calculated, simulated, and measured. So, calculated scattering parameters offer a deep inside view of the performance of the proposed filter. To analyze the proposed filter, the even- and odd-mode excitation are utilized. The input impedance under even- and odd-mode excitation are achieved by transmission line theory and inserted in the scattering parameter equations. Finally, the accurate scattering parameters are derived and compared with simulation results. Simulation results prove the theoretical results. Then, an optimized proposed filter is fabricated and matched with simulation results. The center frequency bands are 4.5 and 6.8 GHz. The optimized filter occupies 0.12 $ \times $ 0.096$\lambda _g^2$, which is small. Its fractional bandwidth of the first and second passband are 1.5 and 2.5%, respectively. Furthermore, wide and strong rejection levels in the stopbands are offered. The structure of the proposed filter provides many freedoms to design. There is an agreement between experimental and simulation results.

In this paper, a novel tunable dual-band bandpass filter (BPF) with independently controlled passbands and constant absolute bandwidth (CABW) is proposed. The CABW passbands of designed dual-band BPF are obtained using manageable electric and magnetic mix coupling. Furthermore, the multiple transmission paths from the input port to the output port are extended for extra transmission zeros, which results in modified selectivity of the proposed dual-band BPF. The tunability and switchability of the developed filter can be implemented by introducing a single bias voltage of varactors for each band. For the tunable dual-band BPF, the simulated results show that the center frequency (CF) of the first passband varies from 2.38 to 2.68 GHz, and the CF of the second passband varies from 3.28 to 3.88 GHz, while 3-dB absolute bandwidths are 101 ± 7 MHz and 98 ± 4 MHz, respectively. Moreover, the two passbands of the filter can also be independently switched by removing the voltage imposed on the varactor CV1 and CV2. The measured results agree well with simulated results, which verify the design theory.

The current paper describes the design of a fourth-order compact narrow-band hairpin-line bandpass filter centered at 2.5 GHz and enhanced stopband suppression ~38 dB required for wireless local area network (IEEE802.11b). The size reduction of 24% has been achieved for a conventional hairpin-line filter with a second-order inward folding of the open-end arms with an improvement in the skirt characteristics. However, the folding mechanism has been overshadowed by the presence of spurious harmonics with an attenuation level of <10 dB. Subsequently, L-shaped spurlines with optimum dimensions have been incorporated in the coupled arms of the folded hairpin-line cells. Three fourth-order filters have been designed with the incorporation of spurlines in different coupling regions, fabricated, and tested experimentally. Accordingly, an extended stopband with a rejection level of 38 dB up to 4.48f0 and a size reduction of 18% over the conventional hairpin-line filter has been achieved.

A class of multi-band planar diplexer with sub-sets of frequency-contiguous transmission bands is reported. Such a radio frequency (RF) device is suitable for lightweight high-frequency receivers aimed at multi-band/multi-purpose mobile satellite communications systems. It consists of two channelizing filters, each of them being made up of the in-series cascade connection of replicas of a constituent multi-passband/multi-embedded-stopband filtering stage. This building filtering stage defines a multi-passband transfer function for each channel, in which each main transmission band is split into various sub-passbands by the multi-stopband part. In this manner, each split passband gives rise to several sub-passbands that are imbricated with their counterpart ones of the other channel. The theoretical RF operational principles of the proposed multi-band diplexer approach with sub-sets of imbricated passbands are detailed by means of a coupling–routing–diagram formalism. Besides, the generation of additional transmission zeros in each channelizing filter for higher-selectivity realizations by exploiting cross-coupling techniques into it is also detailed. Furthermore, for experimental demonstration purposes, a microstrip proof-of-concept prototype of second-order octo-band diplexer in the frequency range of 1.5–2.5 GHz that consists of two quad-band channelizing filters with pairs of imbricated passbands is developed and characterized.

This paper reports on high-order balanced bandpass filters (BPFs) that are continuously tunable in terms of frequency and bandwidth and can be intrinsically switched-off. They use a hybrid integration scheme based on two different types of capacitively loaded resonators—ceramic coaxial and microstrip—that reduce the filter size, enhance its out-of-band selectivity and common-mode suppression, and allow for multiple levels of transfer function tuning. High selectivity is obtained in the differential mode due to the high number of poles and transmission zeros present. The common mode is highly suppressed through the introduction of additional transmission zeros and resistively loaded resonators. Furthermore, the use of ceramic coaxial resonators results in supplementary transmission zeros that are used to lower the out-of-band transmission in the differential mode. Multiple levels of tuning are obtained by reconfiguring only the frequency of the BPF's resonators. For experimental validation, a tunable mixed-technology microstrip prototype was manufactured and measured at S-band. It exhibited frequency tuning between 2.22 and 2.94 GHz, bandwidth tuning between 104 and 268 MHz, and an intrinsically switched-off mode with isolation >50 dB in the differential mode. For all states, the common mode was suppressed by at least 35 dB at the center frequency and within a wide range.

This paper presents a notched band ultra-wideband bandpass filter using a single perturbed quint-mode half-mode substrate-integrated waveguide cavity. The cavity is perturbed by loading four stubs at two corners of the magnetic walls of the single cavity. The variable parameters of stubs are selected to move down the first five resonant modes to the predetermined passband during the design process. Meanwhile, microstrip lines with a transition structure located on two loaded stubs are employed to feed the resonator. Moreover, the filter also firstly designs a notched band by introducing a complementary split-ring resonator inside the cavity to mitigate potential interference signals at 8 GHz (satellite communication). Finally, a prototype filter was implemented and measured to verify.

This article presented a compact bandpass filter with wide-stopband performance. Two substrate integrated waveguide (SIW) cavities and a short-circuited coplanar line introduced between the two cavities are used to realize a compact third-order bandpass filter. The passband is generated by combining the resonant frequency of TE101 mode of the SIW cavities and the fundamental resonant frequency of the short-circuited coplanar line. The size of the proposed filter reduces significantly in comparison with conventional third-order SIW filters. Moreover, the center frequency (CF) and the bandwidth of the filter can be controlled by adjusting the structural parameters of the filter. In addition, the first higher-order mode TE102 of the SIW cavity is suppressed by minimizing the coupling of TE102 mode in order to obtain wide-stopband performance. The proposed filter is designed, fabricated, and measured, and the simulation and measurement results show a good agreement. The filter exhibits compact size, low loss, and a rejection higher than 20 dB up to 1.94f0.

In this paper, a novel multilayer substrate integrated dual-mode dielectric resonator (DR) filter is proposed. The square dual-mode DR is made of the high permittivity substrate by removing the undesired portions and the surface coppers so that the relatively high unloaded quality factor of the dominate TM11 pair can be obtained which compared to these fully dielectric-filled substrate integrated waveguides. Meanwhile, it can be easily integrated in an equivalent cavity implemented by multilayer printed circuit boards for filter design, showcasing low in-band loss, light weight, and compact size. For demonstration, a multilayer substrate integrated DR bandpass filter centered at X-band is designed and measured. Good agreement between the simulated and measured results can be observed, and the measured insertion loss at the passband center frequency (8.38 GHz) is 1.1 dB.

The design of mixed-technology quasi-reflectionless planar bandpass filters (BPFs), bandstop filters (BSFs), and multi-band filters is reported. The proposed quasi-reflectionless filter architectures comprise a main filtering section that determines the power transmission response (bandpass, bandstop, or multi-band type) of the overall circuit network and auxiliary sections that absorb the reflected radio-frequency (RF) signal energy. By loading the input and output ports of the main filtering section with auxiliary filtering sections that exhibit a complementary transfer function with regard to the main one, a symmetric quasi-reflectionless behavior can be obtained at both accesses of the overall filter. The operating principles of the proposed filter concept are shown through synthesized first-order BPF and BSF designs. Selectivity-increase techniques are also described. They are based on: (i) cascading in-series multiple first-order stages and (ii) increasing the order of the filtering sections. Moreover, the RF design of quasi-reflectionless multi-band BPFs and BSFs is discussed. A hybrid integration scheme in which microstrip-type and lumped-elements are effectively combined within the filter volume is investigated for size miniaturization purposes. For experimental validation purposes, two quasi-reflectionless BPF prototypes (one- and two-stage architectures) centered at 2 GHz and a second-order BSF prototype centered at 1 GHz were designed, manufactured, and measured.

In this paper, design and development of a via-free composite right/left handed transmission line (CRLH TL)-based diplexer for WiMAX and WLAN bands is reported. The diplexer is having two channels, where each channel consists of a separate bandpass filter (BPF). The BPF of both channels are designed on via-free CRLH TLs based on a newly proposed right-angled corner-modified split ring resonator (RAC-MSRR) structure. The RAC-MSRR incorporates meander paths because of which working scope of frequencies is focused for measured center frequencies (f1) 3.5 GHz with −3 dB fractional bandwidth (FBW) of 21.21% (BPF1 channel) and (f2) 5.6 GHz with −3 dB FBW of 13.29% (BPF2 channel). For diplexer design, T-section is used for joining two BPFs which results in very good isolation of more than 32.5 dB over the frequency band of 2.5–8.0 GHz. The designed diplexer has passband insertion loss of −0.87 dB at f1 and −1.25 dB at f2. Overall size of the fabricated diplexer including 50 Ω feed line is 18 × 15 mm2. Equivalent lumped circuit model parameters of the diplexer are obtained from the pseudo-inverse matrix technique. Measured results show good concurrence with simulated results and subsequently approve the proposed model design.

This paper illustrates the different possibilities given by additive manufacturing technologies for the creation of passive microwave hardware. The paper more specifically highlights a prototyping scheme where the 3D-printed plastic parts can be used as initial proofs of concept before considering more advanced 3D-printed parts (metal parts, for instance). First, a characterization campaign has been made on common plastics used by a 3D printer using the fused deposition modeling and material jetting (Polyjet©) technologies. The impact of the manufacturing strategy (high-speed or high-accuracy) on the part roughness, as well as on the dielectric material permittivity and loss tangent, has been specifically studied at 10 and 16 GHz. Based on a specifically optimized and deeply explained characterization method, the conductivity of a coating based on silver paint has also been characterized on such plastic parts at 10 and 40 GHz. These plastic materials and coating have been used for the creation of quasi-elliptic and tuning-free bandpass filters centered at 6 and 12 GHz and compared with a similar filter made of stainless steel by selective laser melting. Finally, a compact rectangular TE10 to circular TE01 mode converter also undergoes one prototyping step out of plastic before moving to an advanced part made out of stainless steel. This mode converter, which is made in a single part, is designed to operate from 28 to 36 GHz as a tuning-free final demonstrator.

In this paper, a dual-wideband bandpass filter (BPF) with independently controllable center frequencies (CFs) and wide stopband suppression is presented using a new quintuple-mode resonator (QMR). By applying the classical odd-/even-mode analysis method, the resonant characteristics of the new QMR have been analyzed. It shows that five modes can be excited, and two of them can be employed to form the lower passband, while the other three modes contribute to the higher passband. For verification, a dual-wideband BPF using the new QMR is designed, fabricated, and tested. Experimental results show that the CFs of the dual-wideband BPF centered at 2.96 GHz and 5.695 GHz with 3 dB fractional bandwidths of 27.7 and 23.4%, respectively. In addition, 20-dB suppression in upper-stopband ranges from 2.23 to 4.04f0, where f0 is the center frequency of the first passband. The measurement results are in good agreement with the prediction results.

In this paper, a novel two-stage fish spear-shaped multimode resonator (MMR)-based ultra wideband (UWB) bandpass filter (BPF) is presented. The fish spear-shaped MMR is loaded with stepped impedance resonator in order to improve the out-of-band performance of the proposed filter. The proposed UWB BPF filter has fractional bandwidth better than 110%. In order to validate the present design approach, the filter is fabricated on RT/Duroid 5880 having dielectric constant 2.2, thickness 0.787 mm and loss tangent of 0.0009. The measured passband bandwidth of the filter is from 3.3 to 11.85 GHz, with insertion loss of 1.5 dB and return loss better than 12 dB in the passband. The proposed filter has sharp selectivity and upper stopband with 20 dB attenuation from 12 to 24 GHz.

A miniaturized substrate-integrated coaxial line (SICL) bandpass filter with improved upper stopband using asymmetrical spiral stub-loaded resonators is presented in this paper. Owing to the space-filling feature of the spiral structure, the size of the proposed filter is significantly reduced. A theoretical analysis is carried out to examine the resonance property of the proposed resonator. It is found that the frequency ratios of the second and third harmonics to the fundamental frequency can be extended to 2.86 and 4.4. Benefiting from the circuit structure and SICL technology, the designed filter has a small size, wide stopband, low crosstalk, and high-density integration ability. The measured results show that the proposed filter, with dimensions of 0.051λ0 × 0.044λ0, operates at 1.056 GHz and the 20-dB rejection band is extended to 3.94f0.

A novel miniaturized dual-mode bandpass filter (BPF) using hexagonal loop resonator is presented. In order to reduce the circuit size, capacitive loading structure is applied to enhance the self-capacitance and electrical length of the hexagonal loop resonator. The frequency selectivity and out-of-band rejection of the proposed BPF can be improved by the two inherent transmission zeros in each side of the passband. Compared with the conventional hexagonal loop resonator without capacitive loading structure, the size of the proposed resonator is reduced by 46.6%. The simulated and measured results are presented and show good agreement.