Climate change is impacting archaeological sites around the globe, and Arctic sites are among the most vulnerable because the region is experiencing particularly rapid change. In the face of this threat, archaeologists, heritage managers, and northern communities need to develop strategies for documenting and monitoring Arctic sites and prioritizing them for further investigation. Using three case studies from Banks Island in the western Canadian Arctic, we demonstrate how magnetometer survey could assist in this process, despite the region's poorly developed soils, widespread glacial tills, and periglacial geomorphology, which pose challenges for the technique. The case studies illustrate the utility of magnetometry in mapping both archaeological and permafrost features in the Arctic, allowing it to rapidly investigate site structure and assess the level of threat due to climate change.

While a long history of experimental data shows that aerial thermal images can reveal a wide range of both surface and subsurface archaeological features, technological hurdles have largely prevented more widespread use of this promising prospecting method. However, recent advances in the sophistication of thermal cameras, the reliability of commercial drones, and the growing power of photogrammetric software packages are revolutionizing archaeologists' ability to collect, process, and analyze aerial thermal imagery. This paper provides an overview of the theory behind aerial thermography in archaeology, as well as a discussion of an emerging set of methods developed by the authors for undertaking successful surveys. Summarizing investigations at archaeological sites in North America, the Mediterranean, and the Near East, our results illustrate some contexts in which aerial thermography is very effective, as well as cases in which ground cover, soil composition, or the depth and character of archaeological features present challenges. In addition, we highlight novel approaches for filtering out noise caused by vegetation, as well as methods for improving feature visibility using radiometric thermal imagery.

Recent trends in the practice of archaeology have seen the emergence of the active involvement of stakeholders in the research process. This is an important development, given that the relationship between archaeologists and the communities that they work with has been tenuous, particularly when archaeological findings contest ethnic identities. As a case in point, the findings of the Ifugao Archaeological Project (Philippines) question the bases of Ifugao identity. Ifugao identity is centered on wet-rice production and resistance to colonialism. Previously, the dating of the inception of the Ifugao rice terraces was placed at 2,000 years ago. The findings of the Ifugao Archaeological Project (IAP), however, suggest that the construction of the terraces coincided with the arrival of the Spanish in the northern Philippines. Initially, this finding did not sit well the larger Ifugao descendant communities, but, as our article narrates, the pursuit to actively involve stakeholders in the research process resolved this issue. Our experience in Ifugao has shown that the inclusion of the voices of stakeholders in the interpretation of the past is inadequate because it suggests that indigenous stakeholders are simply contributors to, and not co-investigators of, research projects. As our work in Ifugao demonstrates, primary stakeholders are now co-investigators (exemplified by this coauthored article).

Archaeology as a field is experiencing a curation crisis—our professional paper trail is extensive, and we are not properly trained to adequately catalogue and curate these records. For decades, a handful of archaeologists have pushed for our discipline to confront this crisis—we need better methods for creating records and maintaining archives, as well as stronger training in how to effectively conduct archival research. This issue of Advances in Archaeological Practice echoes these earlier calls to action, adding new voices and perspectives. In addition to the theme of a curation crisis, our authors discuss access to archival records and the relationship between archives and power. The authors and guest editors of this issue hope the contributions presented here will inspire more sustained engagement with archival training, theory, and praxis.

The discipline of archaeology has been tolerating, at best, a “curation crisis” for decades that is unsustainable. The many issues related to long-term collections care continue to worsen. To counter this trend, we advocate that planning for collections be integrated into project administration from inception such that the management of archaeological collections begins before fieldwork and continues well after recovered collections reach the repository. To conceptualize this process, we identify the Collection Management Cycle as a framework for the many stakeholders involved in archaeological projects. We also provide a checklist that identifies the responsibilities stakeholders have to the collections they generate, fund, care for, manage, and/or study. Concerted use of the checklist and other proposed solutions will lead to a new era of a more sustainable archaeological practice.

In 2016 the Archaeology Data Service (ADS) was 20 years old. Since its birth the ADS has had to respond to rapid changes in technology, as well as major cultural and organizational changes in the external operating environment, from which a sustainable business model for digital preservation has emerged. This article will take a retrospective look at challenges that have been faced and will review current and future priorities for those seeking to establish digital repositories. Digital preservation and open access to research data are now much higher up the agenda of funding bodies, but there is still lack of agreement on what constitutes a core digital archive from a fieldwork project. The paper will review what the significant properties of an archaeological archive are, and how reuse can be supported, linking data and publications. It will consider the challenge of dealing with the gray literature and of avoiding creating further data silos, featuring new initiatives to provide interoperability between digital repositories. It will review the role of data and metadata standards, and consider how the profession needs to address its responsibilities over the next 20 years.

Chipped-stone projectile points are used to mark the passage of time and cultures in the record. Archaeologists often recover points in surface survey, yet we do not know how many were found by private collectors before or after professional work. In a 1975–1977 Michigan probabilistic survey, professional archaeologists documented 30 private collections from 20 sample units. In those units, points found by private collectors outnumber professionally recovered ones by a factor of about 32. The survey region's point population estimated separately from the professional and private-collection samples differs by nearly an order of magnitude in favor of private collections, despite highly conservative assumptions about the latter. The number of points found in professional survey is inversely correlated with the number found in private collections, and the professional sample is more sparsely and randomly distributed. However, proportions of several common types are similar between professional and private collections. To the extent that large, reasonably complete samples of points are important for research and preservation, archaeologists must document private collections compiled in and near their survey areas.

This paper introduces a new freeware digital system, based on Google/Android platforms, designed to be a fully integrated and customizable solution to record, manage, and share archaeological survey data. The core of the system is two custom smartphone/tablet applications, through which surveyors are able to retrieve geographical coordinates and relevant attribute data from archaeological locations, but also to perform onsite analysis of artifacts, including taking accurate measurements with digital calipers directly connected to the mobile devices. The system saves all data recovered in the devices' internal memory, as well as in a cloud-based spatial database (Google Fusion Tables), where data can be automatically shared and examined using a rather intuitive set of visualization tools to instantly make maps or produce exploratory charts. Using the example of a recent field survey project for Stone Age sites in Mozambique, we provide a detailed discussion of the creation and use of all hardware and software components of our solution that will allow other researchers to reproduce the methodology and customize the system to meet the needs of their own projects.

The decision as to whether or not to excavate ancient Native mortuary features will require information on their extent and nature. This raises the question of how reliably these aspects can be assessed from the initial exposure of the feature, at its uppermost undisturbed level. In three Ontario cases in which the negotiators decided on full excavation of the features, it is possible to compare the initial assessments to the excavation results. In general, the information obtained in the initial assessments was accurate enough to allow the negotiating parties to make an informed decision, and to assist the archaeologists in their interpretation of the site. However, a major problem with initial assessments is that they sometimes fail to identify features containing only disarticulated minor skeletal elements, leading to an underestimation of the scope of the situation. The solution recommended here is to have a bioarchaeologist on the excavation team to promptly identify and assess any mortuary features and, when necessary, to excavate them.

Hundreds of thousands of archaeological investigations in the United States conducted over the last several decades have documented a large portion of the recovered archaeological record in the United States. However, if we are to use this enormous corpus to achieve richer understandings of the past, it is essential that both CRM and academic archaeologists change how they manage their digital documents and data over the course of a project and how this information is preserved for future use. We explore the nature and scope of the problem and describe how it can be addressed. In particular, we argue that project workflows must ensure that the documents and data are fully documented and deposited in a publicly accessible, digital repository where they can be discovered, accessed, and reused to enable new insights and build cumulative knowledge.

Archaeological sites are often dated through seriation analysis of artifacts found on the site's surface. This relative dating method remains common despite the widespread availability of absolute dating methods because it is fast and cost-effective compared to scientific dating methods such as radiocarbon dating. Surface seriation is especially important for regional survey studies that involve a large number of sites and little to no excavation. In this context it is important to ask: are surface assemblages as reliable an indicator of the age of a site as determined through excavation? This unique study addresses this question using data from seven sites in the Virú Valley on the north coast of Peru. Surface assemblages are compared with excavated ones using the G-test statistic. It is found that surface assemblages do not closely resemble excavated ones in a statistically significant sense. Nevertheless, the relative date of surface assemblages typically resembles the relative date of excavated assemblages. Caution is urged when dating surface assemblages purely through seriation because the surface may not actually be representative of excavated assemblages.

Archaeologists’ newfound ability to access vast digital collections creates opportunities but also presents challenges when those collections are from varied sources, including public institutions and private collectors. We illustrate these challenges by comparing two analyses of gender in Mimbres pottery images. Both analyses used the same procedures, but one included material in private collections, while the second drew on a smaller but more controlled sample. Gender distinctions and division of labor were revealed by the first analysis, but the results were not duplicated in the reanalysis using the controlled sample. We consider reasons for the difference, addressing how collectors’ interests may skew collections and suggesting that some particularly desirable Mimbres pottery designs were created using modern paint. The article concludes with recommendations for how archaeologists can best use mixed collections. These include considering how collections might be skewed and designing analyses to counterbalance likely issues, more chemical analyses with representative samples to gauge the extent of modern manipulation of Mimbres vessels, collecting data on the provenance (i.e., collection history) of material in order to try to trace the likelihood of post-excavation modifications, and studying the process of collecting as a means of understanding the authenticity of artifacts.

The availability of lidar datasets has led to several advances in archaeology, notably in the process of site prospection. Some remote sensing practitioners have aimed to create automated feature extraction (AFE) techniques that increase the efficiency and efficacy of identification and analysis. While these advances have been successful, many archaeological professionals who might have an interest in lidar-derived products do not have the technical experience to modify or create AFE techniques for particular regions or environments. Additionally, some features are not appropriate for AFE. Instead, the most widely used technique is still likely to be visually based manual feature identification. Using authors of different experience levels, we seek to evaluate the use of manual techniques for feature identification and subsequent analysis by implementing a publicly available lidar-derived digital elevation model (DEM). We demonstrate that manual feature extraction (MFE) can be accurate when more than one researcher is involved in a sort of “checks and balances” process. We also show that the use of confidence ratings can be an important part of this process if those ratings have some systematic and clearly defined underpinning. Finally, we argue, using a case study from American Samoa, that manually identified features can be analytically important as part of larger landscape studies.

Archaeology has embraced the shift to digital technology for collecting, analyzing, and sharing data. Digital repositories are now recognized as essential for data stewardship and are setting standards for data deposition. These new technologies and systems support the scientific need for reproducible results through intra-cultural as well as cross-cultural hypothesis testing. Methods of digital data collection in the field, however, are often site specific, restricted by the limited availability of digital technologies, or not well suited for creating systems that support the requirements of the new digital information paradigm. As a small science project, the Chau Hiix Project in Belize will provide examples of the pitfalls in and insights about shifting to digital technology to make its primary data shareable and reusable. These experiences suggest the need for an international collaborative agenda that develops digital data description standards based on controlled vocabulary, facet analysis, and crosswalks implemented at the analog point of collection.

The excavation of the site of Kom W in the Fayum region of Egypt during the 1920s by Caton-Thompson and Gardner resulted in the loss of the original surface topography. Detailed section drawings recorded the surface and bottom of excavation, but it was previously difficult to interpret the published images. This article reports on the use of these images to create a three-dimensional representation of the site as it was before and after excavation in the 1920s. This visualization aids the interpretation of the formation processes that shaped Kom W in ways that were previously unachievable due to limitations in the original data. Archaeological sites are under increasing threat of destruction, especially in the Near East. This method could be applied to legacy data in order to reconstruct a site with the data available.

The rapid pace of economic, political, and social change over the past 150 years has framed and reframed archaeological practice in Ontario. Indigenous groups have become increasingly involved in and critical of archaeological research. Indigenous peoples who value archaeological investigation of ancestral sites, but also desire to protect their buried ancestors, have restricted archaeological excavation and the analysis of remains. Over the last decade, research and consulting archaeologists in Ontario, Canada, have worked collaboratively with Indigenous peoples with an eye to developing sustainable archaeology practices. In the spirit of sustainable archaeology, a comprehensive research project and field school run by Wilfrid Laurier University is training the next generation of archaeologists to adopt investigative techniques that minimize disturbance of ancestral sites. Here we present the results of our surface, magnetic susceptibility, and metal detecting surveys of a Huron-Wendat village site, which pose minimally invasive solutions for investigating village sites in wooded areas. The water-sieving of midden soils in an attempt to recover 100 percent of cultural materials, and the analysis of archived collections also honor the values of Indigenous descendant communities by limiting additional invasive excavation.

The accurate and precise collection of three-dimensional (3D) context and provenience data is of critical importance for archaeologists. Traditional square-hole methods are being augmented by new digital techniques to increase the accuracy and precision with which 3D data are collected. Structure from Motion (SfM) photogrammetry is an emerging digital technique that is becoming more widespread for collecting 3D data of archaeological sites and features. We are using handheld digital cameras and ground-based SfM to record accurate and precise 3D context and provenience data at the scale of the excavation unit and profile during rockshelter excavations in the Lower Pecos Canyonlands of Texas. By combining SfM with traditional excavation methods, we collect 3D data on excavation units, layers, features, and profiles without excavating in grid-bound square units. SfM provides a straightforward and flexible method to excavate based on the stratigraphy and logistical pragmatics, which further aids in assigning precise context and provenience to recovered artifacts and samples. This article describes how ground-based SfM serves as a basic recording tool during excavation and shows that, by applying ground-based SfM methods to excavation, archaeologists can collect more, and more accurate, data than with traditional square-hole methods.

This paper reports on the first and highly effective use of Light Detection and Ranging (lidar) technology to document Chaco roads, monumental linear surface constructions of the precolumbian culture that occupied the Four Corners region of the American Southwest between approximately AD 600 and 1300. Analysis of aerial photographs supplemented by ground survey has been the traditional methodology employed to identify Chaco roads, but their traces have become increasingly subtle and difficult to detect in recent years due to the impacts of natural weathering, erosion, and land development. Roads that were easily visible in aerial photography and on the ground in the 1980s are now virtually invisible, underscoring the need for new, cutting-edge techniques to detect and document them. Using three case studies of the Aztec Airport Mesa Road, the Great North Road, and the Pueblo Alto Landscape, we demonstrate lidar's unprecedented ability to document known Chaco roads, discover previously undetected road segments, and produce a precise quantitative record of these rapidly vanishing features.

We describe the development of an open-access database for Swift Creek Complicated Stamped ceramics, a type of pottery common to Georgia, eastern Alabama, and northern Florida in the Middle and Late Woodland periods between ca. cal A.D. 100 and 800. The characteristic stamped designs on Swift Creek pottery, created by impressing a carved paddle into a clay vessel before firing, provide unique signatures that enable archaeologists to identify paddle matches—multiple vessels, sometimes hundreds of kilometers apart, stamped with a single paddle. These paddle matches potentially allow archaeologists to trace social interactions across hundreds of kilometers with high spatial and temporal resolution. To date, however, this potential has been hindered by the limited accessibility and fragmented nature of the dataset of reconstructed designs. The database we describe integrates paddle designs with other pertinent data for identifying paddle matches and their context, including the results of sourcing and technofunctional analyses and absolute dating. We view this database not only as a critical component of our own research, but also as a platform for collaboration among researchers that will facilitate broad syntheses of the region.

Documents from Oaxaca, Mexico, in archives and museums in Mexico, the United States, and former European colonial powers are stimulating archaeological projects and other research in the areas where they originated. The Teozacoalco Archaeological Project was inspired by colonial-period documents housed in the Nettie Lee Benson Latin American Library at the University of Texas at Austin. Chiyo Cahnu, a Mixtec kingdom better known as Teozacoalco, was the scene of Aztec and Spanish colonial incursions. The archiving in Texas of the famous Mapa de Teozacoalco and associated documents pertaining to the kingdom/municipality, as well as other documents related to Teozacoalco, neighboring Mixtec kingdoms, and other indigenous Oaxacan communities housed in libraries, archives, and museums distant from those communities, invites us to consider some important issues: how and why they left their original homes and arrived in their present locations and legal and ethical ramifications of housing them outside of their homeland. Included in the latter topic are questions about decolonizing documents, whether documents should be repatriated, and best practices for archaeologists whose projects are inspired by them.