The following is a Web Extra expanding upon the article “Understanding Precursor Phenomena for the R-Phase Transformation in Ti-Ni-Based Alloys” by Daisuke Shindo, Yasukazu Murakami, and Takuya Ohba, published in MRS Bulletin27 (2002) pp. 121–127. It provides a closer examination of the domain structure evolution over a temperature range extended beyond that shown in Figure 5 in the article, along with intensity profiles of the electron diffraction.

The following is a Web Extra expanding upon the introductory article, “Science and Technology of Shape-Memory Alloys: New Developments,” by Kazuhiro Otsuka and Tomoyuki Kakeshita, Guest Editors, published in MRS Bulletin27 (2002) pp. 91–100.

The following is a Web Extra expanding upon the introductory article, “Science and Technology of Shape-Memory Alloys: New Developments,” by Kazuhiro Otsuka and Tomoyuki Kakeshita, Guest Editors, published in MRS Bulletin27 (2002) pp. 91–100.

The martensitic (also called displacive or diffusionless) transformation is a classical cooperative phenomenon in solids similar to ferromagnetism. Although the displacement of each atom is not large, the transformation results in a macroscopic change in shape, since all of the atoms move in the same direction in a domain or variant. As a result, unique properties arise, such as the shape-memory effect and superelasticity, whose characteristics are quite distinct from those of normal metals and alloys. Because of these unique properties, shape-memory alloys (SMAs) have been used as new functional materials for applications such as couplings, sensors, actuators, and antennas for cellular phones. In this issue of MRS Bulletin, we present an overview of recent progress in this field. In this introductory article, we discuss fundamental notions, such as the mechanism of the shape-memory effect, the martensitic transformation, and superelasticity, along with examples of applications and other important recent topics not treated in the following articles. It will be shown that progress in the science and technology of shape-memory alloys has been achieved by the side-by-side development of fundamentals and applications.

The value of Nitinol (Ni-Ti) in the field of medicine has proven to be far greater than just as the simple “springy metal” it was once considered to be. In particular, its use in vascular implants highlights many valuable yet subtle behaviors, including a “biased stiffness,” enhanced fatigue resistance, low magnetic susceptibility, and good biocompatibility. Nitinol today is nearly as well known to medical-device designers and physicians as are stainless steel and titanium, and it is the enabling ingredient in a growing number of successful and profitable life-saving devices.

Shape-memory alloys are now widely used because they exhibit a large recoverable strain, which is caused by the conversion of variants in the martensite phase. The conversion of variants is usually promoted by the application of external stress. Recently, however, it was found that the conversion of variants can also be promoted by the application of a magnetic field to induce the martensitic state in ferromagnetic Ni2MnGa shape-memory alloys. Since then, the research in this field has focused considerable attention on applications for using the materials as actuators and sensors because their response to a magnetic field is much faster than their response to heating or cooling. Furthermore, the mechanism of the conversion of variants by the magnetic field has attracted academic interest from many researchers. In this article, we show giant magnetostrictive behavior in three ferromagnetic shape-memory alloys—Ni2MnGa, Fe-Pd, and Fe3Pt—and review the investigations performed so far by many researchers, including the present authors.

Shape-memory alloy (SMA) thin films formed by sputter deposition have attracted considerable attention in the last decade. Current intensive research demonstrates that unique fine microstructures are responsible for the superior shape-memory characteristics observed in thin films as compared with bulk materials. Simultaneously, much effort has been undertaken to develop and fabricate micro devices actuated by SMA thin films. This article reviews the research to date on shape-memory behavior and the mechanical properties of SMA thin films in connection with their peculiar microstructures. Promising applications such as microvalves are demonstrated, along with a focused discussion on process-related problems. All of the results indicate that thin-film shape-memory actuators are ready to contribute to the development of microelectromechanical systems.

The martensitic transformation has so far been studied without considering its interaction with point defects. In this article, we shall show that such interaction, which stems from a universal symmetry property of point defects, can create a rich spectrum of exotic multiscale phenomena in martensitic materials. These phenomena include unique short-range diffusion at the atomic or nano level, remarkable domain-pattern memory at the mesoscopic level, and peculiar rubber-like behavior and aging-induced two-way shape memory at the macroscopic level. Exotic multiscale phenomena may also be found in a wide range of transforming materials, such as ferroelastic, ferroelectric, and ferromagnetic materials. These novel effects may provide new opportunities for these important materials.

Precursor phenomena are critical issues for martensitic transformations. In this article, we show recent progress in understanding precursor phenomena to the R-phase transformation, which is important for both fundamentals and applications. Structural modulation in the parent phase was intensively studied by means of detailed analyses of the weak diffuse scattering of electrons with the aid of recently developed energy-filtered transmission electron microscopy coupled with x-ray diffraction. A peculiar domain-like structure, which originates from static transverse atomic displacements in the parent phase, was discovered by virtue of these advanced methods. The characteristics of this structure (e.g., size, shape, and temperature-dependence), as well as its role in the subsequent R-phase transformation, are discussed.

This article is based on the Outstanding Young Investigator Award presentation given by Kristi S. Anseth at the 2001 MRS Spring Meeting on April 17, 2001, in San Francisco. Anseth was recognized for “innovative work in polymeric biomaterials for drug delivery, bone and cartilage repair, and tissue engineering, and for outstanding leadership potential in this interdisciplinary field of materials research.”

Photopolymerization provides many advantages as a technique for the fabrication of biomaterials. Temporal and spatial control, along with the diversity in material properties found with photopolymerizable materials, are advantageous in the biomaterials industry. For instance, multifunctional anhydride monomers form highly cross-linked surface-eroding networks directly in bone defects. These networks have good mechanical properties that are maintained with degradation and have the potential to restore tissue-like properties to bone during the healing process. Additionally, cartilage-forming cells photoencapsulated in hydrogel networks secrete an extracellular matrix as the hydrogel is resorbed and may provide a treatment alternative for cartilage defects that do not heal spontaneously. Finally, transdermal polymerization (photopolymerization through the skin) of multifunctional monomers is a noninvasive technique that is being developed for tissue regeneration and wound-healing applications.