Hostname: page-component-cd9895bd7-8ctnn Total loading time: 0 Render date: 2024-12-25T17:43:14.440Z Has data issue: false hasContentIssue false
  • English
  • Français

Low-frequency hysteresis model for nonoriented Fe-Si sheet using Preisach theory

Published online by Cambridge University Press:  10 April 2003

O. Deblecker ,
J. Lobry  and
C. Broche
O. Deblecker*
Affiliation:
Electrical Engineering Department, Faculté Polytechnique de Mons, 31 Bd. Dolez, 7000 Mons, Belgium
J. Lobry
Affiliation:
Electrical Engineering Department, Faculté Polytechnique de Mons, 31 Bd. Dolez, 7000 Mons, Belgium
C. Broche
Affiliation:
Electrical Engineering Department, Faculté Polytechnique de Mons, 31 Bd. Dolez, 7000 Mons, Belgium
*
[email protected]
Get access

Abstract

In this work, a low-frequency dynamic hysteresis model is proposed and applied to nonoriented Fe-Si steel. The model based on Preisach theory can be used when skin effect is negligible over the lamination thickness. In our model, the Preisach engine that usually takes the magnetic field as input variable must be inverted. Some B(H) symmetric loops are calculated and compared with measurements in the rolling direction both in quasistatic and dynamic operations under sinusoidal induction.

Keywords

Type
Research Article
Information
The European Physical Journal - Applied Physics , Volume 22 , Issue 2 , May 2003 , pp. 89 - 96
Copyright
© EDP Sciences, 2003

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

O. Deblecker, et al., Application de la théorie de Preisach à la modélisation de l'hystérésis dynamique à basse fréquence de tôles FeSi à grains non orientés, in Proceedings of the Colloque EF'2001, Nancy (France), 2001, pp. 219-225
I.D. Mayergoyz, Mathematical Models of Hysteresis (Springer-Verlag, New York, 1991)
Bertotti, G., J. Appl. Phys. 73, 5827 (1993) CrossRef
Dupré, L., et al., IEEE Trans. Magn. 34, 1168 (1998) CrossRef
Della Torre, E., IEEE Trans. Magn. 27, 3697 (1991) CrossRef
L.-L. Rouve, Prise en compte du comportement magnétique fréquentiel des tôles FeSi en modélisation électrotechnique, Ph.D. Thesis, Institut National Polytechnique de Grenoble (France), 1996
L.-L. Rouve, et al., laminations," IEEE Trans. Magn. 32, 4219 (1996)
G. Bertotti, in Hysteresis in Magnetism (Academic Press, San Diego, 1998)
Bertotti, G., IEEE Trans. Magn. 24, 621 (1988) CrossRef
Jiles, D.C., J. Appl. Phys. 55, 2115 (1984) CrossRef
Bobbio, S., et al., IEEE Trans. Magn. 33, 4417 (1997) CrossRef
Everett, D.H., Trans. Faraday Soc. 51, 1551 (1955) CrossRef
Della Torre, E., IEEE Trans. Magn. 33, 1085 (1997) CrossRef
O. Deblecker, Contribution à la modélisation des champs magnétiques dans les sytèmes comportant des milieux non linéaires et hystérétiques, Ph.D. Thesis, Faculté Polytechnique de Mons (Belgique), 2001
Della Torre, E., IEEE Trans. Audio & Electroac. 14, 86 (1966) CrossRef
R. Storn, K. Price, Minimizing the real functions of the ICEC'96 contest by differential evolution, Proc. Int. Conf. on Evolutionary Computation, Nagoya/Japan, 1996