In view of the significance of Asn deamidation and Asp isomerization to isoAsp at certain sites for protein aging and turnover, it was desirable to challenge the extreme analytical power of electrospray tandem mass spectrometry (ESI-MS/MS) for the possibility of a site-specific detection of this posttranslational modification. For this purpose, synthetic l-Asp/l-isoAsp containing oligopeptide pairs were investigated by ESI-MS/MS and low-energy collision-induced dissociation (CID). Replacement of l-Asp by l-isoAsp resulted in the same kind of shifts for all 15 peptide pairs investigated: (1) the b/y intensity ratio of complementary b and y ions generated by cleavage of the (l-Asp/l-isoAsp)-X bond and of the X-(l-Asp/l-isoAsp) bond was decreased, and (2) the Asp immonium ion abundance at m/z 88 was also decreased. It is proposed that the isoAsp structure hampers the accepted mechanism of b-ion formation on both its N- and C-terminal side. The b/y ion intensity ratio and the relative immonium ion intensity vary considerably, depending on the peptide sequence, but the corresponding values are reproducible when recorded on the same instrument under identical instrumental settings. Thus, once the reference product ion spectra have been documented for a pair of synthetic peptides containing either l-Asp or l-isoAsp, these identify one or the other form. Characterization and relative quantification of l-Asp/l-isoAsp peptide mixtures are also possible as demonstrated for two sequences for which isoAsp formation has been described, namely myrG-D/isoD-AAAAK (deamidated peptide 1–7 of protein kinase A catalytic subunit) and VQ-D/isoD-GLR (deamidated peptide 41–46 of human procollagen alpha 1). Thus, the analytical procedures described may be helpful for the identification of suspected Asn deamidation and Asp isomerization sites in proteolytic digests of proteins.

Binding of native cyt c to L-PG micelles leads to a partially unfolded conformation of cyt c. This micelle-bound state has no stable tertiary structure, but remains as α-helical as native cyt c in solution. In contrast, binding of the acid-unfolded cyt c to L-PG micelles induces folding of the polypeptide, resulting in a similar helical state to that originated from the binding of native cyt c to L-PG micelles. Far-ultraviolet (UV) circular dichroism (CD) spectra showed that this common micelle-associated helical state (HL) has a native-like α-helix content, but is highly expanded without a tightly packed hydrophobic core, as revealed by tryptophan fluorescence, near-UV, and Soret CD spectroscopy. The kinetics of the interaction of native and acid-unfolded cyt c was investigated by stopped-flow tryptophan fluorescence. Formation of HL from the native state requires the disruption of the tightly packed hydrophobic core in the native protein. This micelle-induced unfolding of cyt c occurs at a rate ∼0.1 s−1, which is remarkably faster in the lipid environment compared with the expected rate of unfolding in solution. Refolding of acid-unfolded cyt c with L-PG micelles involves an early highly helical collapsed state formed during the burst phase (<3 ms), and the observed main kinetic event reports on the opening of this early compact intermediate prior to insertion into the lipid micelle.

The neurotrophins are growth factors that are involved in the development and survival of neurons. Neurotrophin release by a target tissue results in neuron growth along the neurotrophin concentration gradient, culminating in the eventual innervation of the target tissue. These activities are mediated through trk cell surface receptors. We have determined the structures of the heterodimer formed between brain-derived neurotrophic factor (BDNF) and neurotrophin 4 (NT4), as well as the structure of homodimer of NT4. We also present the structure of the Neurotrophin 3 homodimer, which is refined to higher resolution than previously published. These structures provide the first views of the architecture of the NT4 protomer. Comparison of the surface of a model of the BDNF homodimer with the structures of the neurotrophin homodimers reveals common features that may be important in the binding between the neurotrophins and their receptors. In particular, there exists an analogous region on the surface of each neurotrophin that is likely to be involved in trk receptor binding. Variations in sequence on the periphery of this common region serve to confer trk receptor specificity.

Effective inhibitors of matrix metalloproteinases (MMPs), a family of connective tissue-degrading enzymes, could be useful for the treatment of diseases such as cancer, multiple sclerosis, and arthritis. Many of the known MMP inhibitors are derived from peptide substrates, with high potency in vitro but little selectivity among MMPs and poor bioavailability. We have discovered nonpeptidic MMP inhibitors with improved properties, and report here the crystal structures of human stromelysin-1 catalytic domain (SCD) complexed with four of these inhibitors. The structures were determined and refined at resolutions ranging from 1.64 to 2.0 Å. Each inhibitor binds in the active site of SCD such that a bulky diphenyl piperidine moiety penetrates a deep, predominantly hydrophobic S′1 pocket. The active site structure of the SCD is similar in all four inhibitor complexes, but differs substantially from the peptide hydroxamate complex, which has a smaller side chain bound in the S′1 pocket. The largest differences occur in the loop forming the “top” of this pocket. The occupation of these nonpeptidic inhibitors in the S′1 pocket provides a structural basis to explain their selectivity among MMPs. An analysis of the unique binding mode predicts structural modifications to design improved MMP inhibitors.

The sequence of apamin, an 18 residue bee venom toxin, encloses all the information required for the correct disulfide-coupled folding into the cystine-stabilized α-helical motif. Three apamin analogs, each containing a pair of selenocysteine residues replacing the related cysteines, were synthesized to mimic the three possible apamin isomers with two crossed, parallel, or consecutive disulfides, respectively. Refolding experiments clearly revealed that the redox potential of selenocysteine prevails over the sequence encoded structural information for proper folding of apamin. Thus, selenocysteine can be used as a new device to generate productive and nonproductive folding intermediates of peptides and proteins. In fact, disulfides are selectively reduced in presence of the diselenide and the conformational features derived from these intermediates as well as from the three-dimensional (3D) structures of the selenocysteine-containing analogs with their nonnatural networks of diselenide/disulfide bridges allowed to gain further insight into the subtle driving forces for the correct folding of apamin that mainly derive from local conformational preferences.

We previously reported the de novo design of an amphiphilic peptide [YGG(IEKKIEA)4] that forms a native-like, parallel triple-stranded coiled coil. Starting from this peptide, we sought to regulate the assembly of the peptide by a metal ion. The replacement of the Ile18 and Ile22 residues with Ala and Cys residues, respectively, in the hydrophobic positions disrupted of the triple-stranded α-helix structure. The addition of Cd(II), however, resulted in the reconstitution of the triple-stranded α-helix bundle, as revealed by circular dichroism (CD) spectroscopy and sedimentation equilibrium analysis. By titration with metal ions and monitoring the change in the intensity of the CD spectra at 222 nm, the dissociation constant Kd was determined to be 1.5 ± 0.8 μM for Cd(II). The triple-stranded complex formed by the 113Cd(II) ion showed a single 113Cd NMR resonance at 572 ppm whose chemical shift was not affected by the presence of Cl− ions. The 113Cd NMR resonance was connected with the βH protons of the cysteine residue by 1H–113Cd heteronuclear multiple quantum correlation spectroscopy. These NMR results indicate that the three cysteine residues are coordinated to the cadmium ion in a trigonal-planar complex. Hg(II) also induced the assembly of the peptide into a triple-stranded α-helical bundle below the Hg(II)/peptide ratio of 1/3. With excess Hg(II), however, the α-helicity of the peptide was decreased, with the change of the Hg(II) coordination state from three to two. Combining this construct with other functional domains should facilitate the production of artificial proteins with functions controlled by metal ions.

The contribution of the Ser45 hydrogen bond to biotin binding activation and equilibrium thermodynamics was investigated by biophysical and X-ray crystallographic studies. The S45A mutant exhibits a 1,700-fold greater dissociation rate and 907-fold lower equilibrium affinity for biotin relative to wild-type streptavidin at 37 °C, indicating a crucial role in binding energetics. The crystal structure of the biotin-bound mutant reveals only small changes from the wild-type bound structure, and the remaining hydrogen bonds to biotin retain approximately the same lengths. No additional water molecules are observed to replace the missing hydroxyl, in contrast to the previously studied D128A mutant. The equilibrium ΔG°, ΔH°, ΔS°, ΔC°P, and activation ΔG[Dagger] of S45A at 37 °C are −13.7 ± 0.1 kcal/mol, −21.1 ± 0.5 kcal/mol, −23.7 ± 1.8 cal/mol K, −223 ± 12 cal/mol K, and 20.0 ± 2.5 kcal/mol, respectively. Eyring analysis of the large temperature dependence of the S45A off-rate resolves the ΔH[Dagger] and ΔS[Dagger] of dissociation, 25.8 ± 1.2 kcal/mol and 18.7 ± 4.3 cal/mol K. The large increases of ΔH[Dagger] and ΔS[Dagger] in the mutant, relative to wild-type, indicate that Ser45 could form a hydrogen bond with biotin in the wild-type dissociation transition state, enthalpically stabilizing it, and constraining the transition state entropically. The postulated existence of a Ser45-mediated hydrogen bond in the wild-type streptavidin transition state is consistent with potential of mean force simulations of the dissociation pathway and with molecular dynamics simulations of biotin pullout, where Ser45 is seen to form a hydrogen bond with the ureido oxygen as biotin slips past this residue after breaking the native hydrogen bonds.

Human liver cytosolic and mitochondrial isozymes of aldehyde dehydrogenase share 70% sequence identity. However, the first 21 residues are not conserved between the human isozymes (15% identity). The three-dimensional structures of the beef mitochondrial and sheep cytosolic forms have virtually identical three-dimensional structures. Here, we solved the structure of the human mitochondrial enzyme and found it to be identical to the beef enzyme. The first 21 residues are found on the surface of the enzyme and make no contact with other subunits in the tetramer. A pair of chimeric enzymes between the human isozymes was made. Each chimera had the first 21 residues from one isozyme and the remaining 479 from the other. When the first 21 residues were from the mitochondrial isozyme, an enzyme with cytosolic-like properties was produced. The other was expressed but was insoluble. It was possible to restore solubility and activity to the chimera that had the first 21 cytosolic residues fused to the mitochondrial ones by making point mutations to residues at the N-terminal end. When residue 19 was changed from tyrosine to a cysteine, the residue found in the mitochondrial form, an active enzyme could be made though the Km for NAD+ was 35 times higher than the native mitochondrial isozyme and the specific activity was reduced by 75%. This residue interacts with residue 203, a nonconserved, nonactive site residue. A mutation of residue 18, which also interacts with 203, restored solubility, but not activity. Mutation to residue 15, which interacts with 104, also restored solubility but not activity. It appears that to have a soluble or active enzyme a favorable interaction must occur between a residue in a surface loop and a residue elsewhere in the molecule even though neither make contact with the active site region of the enzyme.

α1-Antitrypsin deficiency, which can lead to both emphysema and liver disease, is a result of the accumulation of α1-antitrypsin polymers within the hepatocyte. A wealth of biochemical and biophysical data suggests that α1-antitrypsin polymers form via insertion of residues from the reactive center loop of one molecule into the β-sheet of another. However, this long-standing hypothesis has not been confirmed by direct structural evidence. Here, we describe the first crystallographic evidence of a β-strand linked polymer form of α1-antitrypsin: the crystal structure of a cleaved α1-antitrypsin polymer.

The 3D structures of complexes between the hydroxynitrile lyase from Hevea brasiliensis (Hb–HNL) and several substrate and/or inhibitor molecules, including trichloracetaldehyde, hexafluoracetone, acetone, and rhodanide, were determined by X-ray crystallography. The complex with trichloracetaldehyde showed a covalent linkage between the protein and the inhibitor, which had apparently resulted from nucleophilic attack of the catalytic Ser80-Oγ. All other complexes showed the substrate or inhibitor molecule merely hydrogen bonded to the protein. In addition, the native crystal structure of Hb–HNL was redetermined at cryo-temperature and at room temperature, eliminating previous uncertainties concerning residual electron density within the active site, and leading to the observation of two conserved water molecules. One of them was found to be conserved in all complex structures and appears to have mainly structural significance. The other water molecule is conserved in all structures except for the complex with rhodanide; it is hydrogen bonded to the imidazole of the catalytic His235 and appears to affect the Hb–HNL catalyzed reaction. The observed 3D structural data suggest implications for the enzyme mechanism. It appears that the enzyme-catalyzed cyanohydrin formation is unlikely to proceed via a hemiacetal or hemiketal intermediate covalently attached to the enzyme, despite the observation of such an intermediate for the complex with trichloracetaldehyde. Instead, the data are consistent with a mechanism where the incoming substrate is activated by hydrogen bonding with its carbonyl oxygen to the Ser80 and Thr11 hydroxy groups. A hydrogen cyanide molecule subsequently replaces a water molecule and is deprotonated presumably by the His235 base. Deprotonation is facilitated by the proximity of the positive charge of the Lys236 side chain.

β-Lactamases are the major resistance mechanism to β-lactam antibiotics and pose a growing threat to public health. Recently, bacteria have become resistant to β-lactamase inhibitors, making this problem pressing. In an effort to overcome this resistance, non-β-lactam inhibitors of β-lactamases were investigated for complementarity to the structure of AmpC β-lactamase from Escherichia coli. This led to the discovery of an inhibitor, benzo(b)thiophene-2-boronic acid (BZBTH2B), which inhibited AmpC with a Ki of 27 nM. This inhibitor is chemically dissimilar to β-lactams, raising the question of what specific interactions are responsible for its activity. To answer this question, the X-ray crystallographic structure of BZBTH2B in complex with AmpC was determined to 2.25 Å resolution. The structure reveals several unexpected interactions. The inhibitor appears to complement the conserved, R1-amide binding region of AmpC, despite lacking an amide group. Interactions between one of the boronic acid oxygen atoms, Tyr150, and an ordered water molecule suggest a mechanism for acid/base catalysis and a direction for hydrolytic attack in the enzyme catalyzed reaction. To investigate how a non-β-lactam inhibitor would perform against resistant bacteria, BZBTH2B was tested in antimicrobial assays. BZBTH2B significantly potentiated the activity of a third-generation cephalosporin against AmpC-producing resistant bacteria. This inhibitor was unaffected by two common resistance mechanisms that often arise against β-lactams in conjunction with β-lactamases. Porin channel mutations did not decrease the efficacy of BZBTH2B against cells expressing AmpC. Also, this inhibitor did not induce expression of AmpC, a problem with many β-lactams. The structure of the BZBTH2B/AmpC complex provides a starting point for the structure-based elaboration of this class of non-β-lactam inhibitors.

The YER057c/YIL051c/YjgF protein family is a set of 24 full-length homologs, each ∼130 residues in length, and each with no known function or relationship to proteins of known structure. To determine the function of this family, the structure of one member—the YjgF protein from Escherichia coli—was solved and refined at a resolution of 1.2 Å. The YjgF molecule is a homotrimer with exact threefold symmetry. Its tertiary and quaternary structures are related to that of Bacillus subtilis chorismate mutase, although their active sites are completely different. The YjgF protein has an active site curiously similar to protein tyrosine phosphatases, including a covalently modified cysteine, but it is unlikely to be functionally related. The lessons learned from this attempt to deduce function from structure may be useful to future projects in structural genomics.

Hsp16.3, the α-crystallin-related small heat shock protein of Mycobacterium tuberculosis that is maximally expressed during the stationary phase and is a major membrane protein, has been reported to form specific trimer-of-trimers structure and to act as an effective molecular chaperone (Chang Z et al., 1996, J Biol Chem 271:7218–7223). However, little is known about its action mechanism. In this study, Hsp16.3 conformational intermediates with dramatically increased chaperone activities were detected after treatment with very low concentrations of guanidine hydrochloride (0.05 M), urea (0.3 M), or mild heating (30°C). The intermediates showed a significant increase in their capacity to bind the hydrophobic probe 1-anilino-8-naphthalene sulfonate (ANS), indicating an increased exposure of hydrophobic surfaces. Interestingly, the greatest chaperone activities of Hsp16.3 were observed in the presence of 0.3 M guanidine HCl or when heated to 35°C. CD spectroscopy studies revealed no significant changes in protein secondary and tertiary structures at these mild treatments. Our in vitro studies also indicate that long-time-heated Hsp16.3, heated even to temperatures as high as 85°C, has almost the same, if not a slightly greater, chaperone activities as the native protein when cooled to room temperature and its secondary structures also almost recovered. Together, these results suggest that Hsp16.3 modulates its chaperone activity by exposing hydrophobic surfaces and that the protein structure is highly stable and flexible, thus highly adapted for its function.

The relationship between the structure of a free ligand in solution and the structure of its bound form in a complex is of great importance to the understanding of the energetics and mechanism of molecular recognition and complex formation. In this study, we use a structure-based thermodynamic approach to study the dissociation of the complex between the toxin microcystin-LR (MLR) and the catalytic domain of protein phosphatase-1 (PP-1c) for which the crystal structure of the complex is known. We have calculated the thermodynamic parameters (enthalpy, entropy, heat capacity, and free energy) for the dissociation of the complex from its X-ray structure and found the calculated dissociation constant (4.0 × 10−11) to be in excellent agreement with the reported inhibitory constant (3.9 × 10−11). We have also calculated the thermodynamic parameters for the dissociation of 47 PP-1c:MLR complexes generated by docking an ensemble of NMR solution structures of MLR onto the crystal structure of PP-1c. In general, we observe that the lower the root-mean-square deviation (RMSD) of the docked complex (compared to the X-ray complex) the closer its free energy of dissociation (ΔG°d) is to that calculated from the X-ray complex. On the other hand, we note a significant scatter between the ΔG°d and the RMSD of the docked complexes. We have identified a group of seven docked complexes with ΔG°d values very close to the one calculated from the X-ray complex but with significantly dissimilar structures. The analysis of the corresponding enthalpy and entropy of dissociation shows a compensation effect suggesting that MLR molecules with significant structural variability can bind PP-1c and that substantial conformational flexibility in the PP-1c:MLR complex may exist in solution.

The yrdC family of genes codes for proteins that occur both independently and as a domain in proteins that have been implicated in regulation. An example for the latter case is the sua5 gene from yeast. Sua5 was identified as a suppressor of a translation initiation defect in cytochrome c and is required for normal growth in yeast (Na JG, Pinto I, Hampsey M, 1992, Genetics 11:791–801). However, the function of the Sua5 protein remains unknown; Sua5 could act either at the transcriptional or the posttranscriptional levels to compensate for an aberrant translation start codon in the cyc gene. To potentially learn more about the function of YrdC and proteins featuring this domain, the crystal structure of the YrdC protein from Escherichia coli was determined at a resolution of 2.0 Å. YrdC adopts a new fold with no obvious similarity to those of other proteins with known three-dimensional (3D) structure. The protein features a large concave surface on one side that exhibits a positive electrostatic potential. The dimensions of this depression, its curvature, and the fact that conserved basic amino acids are located at its floor suggest that YrdC may be a nucleic acid binding protein. An investigation of YrdC's binding affinities for single- and double-stranded RNA and DNA fragments as well as tRNAs demonstrates that YrdC binds preferentially to double-stranded RNA. Our work provides evidence that 3D structures of functionally uncharacterized gene products with unique sequences can yield novel folds and functional insights.

The crystal structure of ligand-free tryptophanyl-tRNA synthetase (TrpRS) was solved at 2.9 Å using a combination of molecular replacement and maximum-entropy map/phase improvement. The dimeric structure (R = 23.7, Rfree = 26.2) is asymmetric, unlike that of the TrpRS tryptophanyl–5′AMP complex (TAM; Doublié S, Bricogne G, Gilmore CJ, Carter CW Jr, 1995, Structure 3:17–31). In agreement with small-angle solution X-ray scattering experiments, unliganded TrpRS has a conformation in which both monomers open, leaving only the tryptophan-binding regions of their active sites intact. The amino terminal αA-helix, TIGN, and KMSKS signature sequences, and the distal helical domain rotate as a single rigid body away from the dinucleotide-binding fold domain, opening the AMP binding site, seen in the TAM complex, into two halves. Comparison of side-chain packing in ligand-free TrpRS and the TAM complex, using identification of nonpolar nuclei (Ilyin VA, 1994, Protein Eng 7:1189–1195), shows that significant repacking occurs between three relatively stable core regions, one of which acts as a bearing between the other two. These domain rearrangements provide a new structural paradigm that is consistent in detail with the “induced-fit” mechanism proposed for TyrRS by Fersht et al. (Fersht AR, Knill-Jones JW, Beduelle H, Winter G, 1988, Biochemistry 27:1581–1587). Coupling of ATP binding determinants associated with the two catalytic signature sequences to the helical domain containing the presumptive anticodon-binding site provides a mechanism to coordinate active-site chemistry with relocation of the major tRNA binding determinants.

Elicitins, produced by most of the phytopathogenic fungi of the genus Phytophthora, provoke in tobacco both remote leaf necrosis and the induction of a resistance against subsequent attack by various microorganisms. Despite the recent description of the three-dimensional crystal structure of cryptogein (CRY), the molecular basis of the interactions between Phytophthora and plants largely remains unknown. The X-ray crystal structure, refined at 2.1 Å, of a ligand complexed, mutated CRY, K13H, is reported. Analysis of this structure reveals that CRY is able to encapsulate a ligand that induces only a minor conformational change in the protein structure. The ligand has been identified as an ergosterol by gas chromatographic analysis coupled with mass spectrometry analysis. This result is consistent with biochemical data that have shown that elicitins are a distinct class of Sterol Carrier Proteins (SCP). Data presented here provide the first structural description of the pertinent features of the elicitin sterol interaction and permit a reassessment of the importance of both the key residue 13 and the mobility of the omega loop for the accessibility of the sterol to the cavity. The biological implications thereof are discussed. This paper reports the first structure of a SCP/sterol complex.

The Escherichia coli RecA protein triggers both DNA repair and mutagenesis in a process known as the SOS response. The 81-residue E. coli protein DinI inhibits activity of RecA in vivo. The solution structure of DinI has been determined by multidimensional triple resonance NMR spectroscopy, using restraints derived from two sets of residual dipolar couplings, obtained in bicelle and phage media, supplemented with J couplings and a moderate number of NOE restraints. DinI has an α/β fold comprised of a three-stranded β-sheet and two α-helices. The β-sheet topology is unusual: the central strand is flanked by a parallel and an antiparallel strand and the sheet is remarkably flat. The structure of DinI shows that six negatively charged Glu and Asp residues on DinI's kinked C-terminal α-helix form an extended, negatively charged ridge. We propose that this ridge mimics the electrostatic character of the DNA phospodiester backbone, thereby enabling DinI to compete with single-stranded DNA for RecA binding. Biochemical data confirm that DinI is able to displace ssDNA from RecA.

Site-directed mutagenesis was used to replace Lys68 of the human hypoxanthine phosphoribosyltransferase (HGPRTase) with alanine to exploit this less reactive form of the enzyme to gain additional insights into the structure activity relationship of HGPRTase. Although this substitution resulted in only a minimal (one- to threefold) increase in the Km values for binding pyrophosphate or phosphoribosylpyrophosphate, the catalytic efficiencies (kcat/Km) of the forward and reverse reactions were more severely reduced (6- to 30-fold), and the mutant enzyme showed positive cooperativity in binding of α-d-5-phosphoribosyl-1-pyrophosphate (PRPP) and nucleotide. The K68A form of the human HGPRTase was cocrystallized with 7-hydroxy [4,3-d] pyrazolo pyrimidine (HPP) and Mg PRPP, and the refined structure reported. The PRPP molecule built into the [(Fo − Fc)φcalc] electron density shows atomic interactions between the Mg PRPP and enzyme residues in the pyrophosphate binding domain as well as in a long flexible loop (residues Leu101 to Gly111) that closes over the active site. Loop closure reveals the functional roles for the conserved SY dipeptide of the loop as well as the molecular basis for one form of gouty arthritis (S103R). In addition, the closed loop conformation provides structural information relevant to the mechanism of catalysis in human HGPRTase.

The PDB accession number for the structure published in the above referenced article (Volume 8, Number 5, 1999, pp. 1023–1031) is 1D6N. We regret the omission in the original article.