To assist the precision and stability of wavelength at 1550 nm and 1300 nm in planar optical waveguides, hybrid semiconductor-metal corrugated gratings with nanometer period are integrated into silicon-based optical interconnects. This work utilizes multi-parametric optical waveguide models to compute the mode-coupling coefficients in the silicon photonic devices. For such a semiconductor-metal hybrid structure, a proper photonic technique needs to be utilized to solve this computational complexity. The optical method and the photonic method are used to compute coupling coefficients. Both methods have close numerical values shown in figures. Numerical results demonstrate how the normalized corrugation amplitudes of metal gratings can affect the coupling coefficients. Further physical interpretation and discussion can support and explain the above results. The modeling results can help engineers decide the values of parameters used in the design and fabrication of optical waveguides.

In this paper we report the use of a device based on two multilayered a-SiC:H/a-Si:H stacked heterostructures to photodetect and demultiplex optical signals of the visible spectrum. Both heterostructures were optimized for the detection of short and long wavelengths within the visible range. The optoelectronic characterization of the device includes spectral response measurements under reverse bias and using different optical steady state light conditions to soak the device. Results show that the device photocurrent signal measured using appropriate steady state optical bias, allows the separate detection of the input transmitted signals which enables the demultiplexing task. A numerical simulation, gives insight into the transduction mechanism to explain the device wavelength selective behavior.

We propose to use Purcell effect emerged at slow light regions in photonic crystal waveguide (PC-WG) modes for controlling the relaxation time of excited carriers in QDs. Straight GaAs PC-WGs including InAs-QDs with various lattice constants of PC were prepared in order to control the wavelength of the slow light in the PC-WG modes. PL measurements of the PC-WGs indicated enhancements of emission from QDs at the localized wavelength of slow light regions due to the Purcell effect. The enhanced emission peak wavelength was continuously shifted with the PC lattice constant. These results suggest that the PC-WG can be utilized to modify the spontaneous emission rate and carrier relaxation time of the embedded QD. This modification can be applied and useful for various QD-based optical devices as well as our proposed all-optical switching device based on PC-WG/QD.

In this paper, we studied the optimization of preparation for polymeric optical waveguide based bus structures with embedded 45 degree micro-mirrors by metallic hard mold method. The 45º facets on the metallic hard mold, which were used to create the 45 degree micro-mirrors, were studied by the atomic force microscopy (AFM). The surface roughness of the 45 degree facets was reduced from 70nm to be 2nm by a photopolymer coating step. High speed test on the waveguide shows the low loss and high Q-factor performance of the waveguide structures. A backplane bus with 10 Gbits/sec channel will be reported.

Optical fibers have been successfully used in long-haul communication, endoscopy, and other optical systems to transmit optical power as well as information from one point to another, serving as interconnects at various scales. In integrated sensor systems, optical fibers have been frequently employed to connect the source and the detector, due to their flexibility, compactness, and low loss. However, optical fibers can provide more functions than a simple transmission channel. In this paper, we review our work on optical fibers as a platform for molecular sensors based on Raman spectroscopy (RS) and surface enhanced Raman scattering (SERS). The fibers serve to significantly increase the sensitivity of RS/SERS and to facilitate the integration of a compact sensor system. We will discuss the principles of operation of various building blocks, demonstrate our recent results, and highlight some potential applications.

The ever-growing Internet data traffic leads to a continuously increasing demand in both capacity and performance of large-scale Information and Communication (ICT) systems such as high-capacity routers and switches, large data centers, and supercomputers. Complex and spatially distributed multirack systems comprising a large number of data processing and storage modules with high-speed interfaces have already become reality. A consequence of this trend is that internal interconnection systems also become large and complex. Interconnection distances, total required number of cables, and power consumption increase rapidly with the increase in capacity, which can cause limitations in scalability of the whole system. This paper addresses requirements and limitations of intrasystem interconnects for application in large-scale data processing and storage systems. Various point-to-point and optically switched interconnection options are reviewed with regard to their potential to achieve large scalability while reducing power consumption.

Tunable WDM converters based on amorphous SiC multilayer photonic active filters are analyzed. The manipulation of the magnitude is achieved through appropriated front and back backgrounds. Transfer function characteristics are studied. Results show that the light-activated device combines the demultiplexing operation with the simultaneous photodetection and self amplification of an optical signal. Depending on the wavelength of the external background and irradiation side, it acts either as a short- or a long- pass band filter or as a band-stop filter. A combinational logic function is mapped onto an active two stage optoelectronic logic circuit. An algorithm to decode the multiplex signal is established. An optoelectronic model supports the optoelectronic logic architecture.

Two-photon polymerization (2PP) is an emerging tool in the field of additive manufacturing technologies, which allows for the elegant 3D lithographic production by means of photosensitive resins. One key advantage of 2PP is the achievable feature resolution. A few tens of nanometers are currently the resolution limit for this novel technique. Fields of applications are as diverse as photonics, microfluidics and biomedicine.

A challenging photonics application for 2PP are optical interconnects, where optical elements on printed circuit boards are connected with waveguides. The possibility for real 3D structuring allows for easier positioning of the cured structures and straightforward processing outperforming techniques such as 2D lithography or reactive ion etching in this regard. If mechanical flexibility of the printed circuit board is required as a property for certain niche applications, polysiloxanes are an interesting class of matrix material. This is also due to their low optical damping behavior and high temperature stability as the material has to withstand temperatures around 250°C during the manufacturing process. In this work, we present our latest approach to create polysiloxane-based waveguides via 2PP of specially tailored thiol-ene formulations. Latest improvements on the ease of processing and the local refractive index increase are shown as well as the proof of principle for waveguiding. Optical waveguides were successfully created via 2PP with writing speeds around 10 mm/min.