Hostname: page-component-586b7cd67f-r5fsc Total loading time: 0 Render date: 2024-11-26T21:08:44.305Z Has data issue: false hasContentIssue false
  • English
  • Français

RF Sputtered ITO Thin Film with Improved Optical Property

Published online by Cambridge University Press:  15 June 2012

Kousik Midya ,
Abhishek Sharma ,
Anil Kottantharayil  and
Subhabrata Dhar
Kousik Midya*
Affiliation:
Dept. of Electrical Engineering, IIT Bombay, India
Abhishek Sharma
Affiliation:
Dept. of Electrical Engineering, IIT Bombay, India
Anil Kottantharayil
Affiliation:
Dept. of Electrical Engineering, IIT Bombay, India
Subhabrata Dhar
Affiliation:
Dept. of Physics; IIT Bombay, India,
*
*e-mail: [email protected]
Get access

Abstract

In this study indium tin oxide (ITO) thin films have been deposited by RF sputtering technique on quartz substrate. In all cases, the substrate was heated during deposition. Thin film deposited under various process conditions, shows characteristic XRD reflection corresponding to the (222) crystal orientation. Transmittance of the film has been measured for the wavelength range from 190 to 3300 nm. Average transmittance of 84.4%, 90.2% and 85.3% for wavelengths up to 800 nm, 2500 nm and 3300 nm respectively has been obtained. The resistivity in this case is found to be as low as ∼10 × 10-4 Ω-cm. Our study is focused on controlling the resistivity of the deposited film, without compromising transmittance in the near infra red (NIR) region of the spectrum. Substrate heating during deposition is found to result in films with grains which are oriented in (222) direction predominantly. Moreover, the average grain size is increased with subsequent annealing. It has been observed that though the transmittance for the samples doesn’t vary substantially upon annealing the resistivity decreases by several factors.

Keywords

sputteringtransparent conductoroptical properties
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1447: Symposium V – Nanostructured and Advanced Materials for Solar-Cell Manufacturing , 2012 , mrss12-1447-v03-19
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1] Kim, J. H., Lee, J. H., Heo, Y. W., Kim, J. J., Park, J. O., J. Electroceram 23 (2009) 169.Google Scholar
[2] Fallah, H.R., Ghasemi, M., Hassanzadeh, A, Steki, H., Mater. Res. Bull., 42 (2007) 487.Google Scholar
[3] Liu, J., Wu, D., Zeng, S., J. of mat. Proc. Tech. 209 (2009) 3943 Google Scholar
[4] Tuna, Ocal, Selamet, Y., Aygun, G., Ozyuzer, L., J. Phys. D: Appl. Phys. 43 (2010) 055402.Google Scholar
[5] Kurdesau, F., Khripunov, G., da Cunha, A. F., Kaelin, M., Tiwari, A.N., J. of Non-Cryst. Solids, 352 (2006) 1466.Google Scholar
[6] Guille´n, C., Herrero, J., Thin Solid Films, 480 (2005) 129.Google Scholar
[7] Zhang, B., Dong, X., Xu, X., Wang, X., Wu, J., Mat. Sc. in Sem. Proc. 10 (2007) 264.Google Scholar
[8] Bender, M., Seelig, W, Daube, C, Frankenberger, H, Ocker, B, Stollenwerk, J, Thin Solid Films, 326 (1998) 72.Google Scholar
[9] Benoy, M.D., Mohammed, E.M., Suresh Babu, M., and Binu, P.J., Pradeep, B., Braz, . J. of Physics, 39 (2009) 629.Google Scholar
[10] El-Raheem, M. M. Ebd., Ali, H. M., AL-Hosiny, N. M., EL AAL, M. S. A., J. of non-oxide glasses, 2 (2010) 67.Google Scholar
[11] Ali, H. M., Mohamed, H. A., Mohamed, S. H., Eur. Phys. J. Appl. Phys., 31 (2005) 87.Google Scholar
[12] Jung, Y. S., Lee, S. S., J. of Crystal Growth, 259 (2003) 343.Google Scholar
[13] Bingyan, R., Xiuoping, L., Minhua, W., Ying, X., Rare Metals, 25 (2006) 137.Google Scholar
[14] Chuang, Miaoju, J. Mater. Sci. Technol., 26(2010) 577.Google Scholar
[15] Gupta, L., Mansingh, A., Srivastava, P. K., Thin Solid Films, 176 (1989) 33.Google Scholar