Hostname: page-component-586b7cd67f-tf8b9 Total loading time: 0 Render date: 2024-11-25T17:45:23.992Z Has data issue: false hasContentIssue false
  • English
  • Français

Preparation and Physical Properties of V2 O5 Aerogels

Published online by Cambridge University Press:  25 February 2011

Hiroshi Hirashima  and
Kazumi Sudoh
Hiroshi Hirashima
Affiliation:
Keio University, Faculty of Science and Technology 3–14–1, Hiyoshi, Kohoku-ku, Yokohama 223, Japan
Kazumi Sudoh
Affiliation:
Keio University, Faculty of Science and Technology 3–14–1, Hiyoshi, Kohoku-ku, Yokohama 223, Japan
Get access

Abstract

Monolithic aerogels and aerogel coatings of hydrated V2O5 containing 0 to 10 mol% GeO2 were prepared from metal alkoxides by hydrolysis and autoclave drying. The bulk aerogels of high porosity, more than 90 %, were obtained. On the other hand, the porosity of the aerogel coatings, about 50 nm in thickness, was about 50 %. The aerogels consisted of micro fibrils, less than 20 nm in diameter. Diffraction peaks of crystalline vanadium oxides were not observed for the as-dried aerogels. Dynamic microhardness of the bulk aerogels was very low, but increased with addition of GeO2· Dc electrical conductivity of the bulk aerogels was lower than that of the bulk xerogels by one order of magnitude, and was isotropie. The aerogels were surface fractal with Ds ≅ 2.7.

Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 271: Symposium N – Better Ceramics Through Chemistry V , 1992 , 573
Copyright
Copyright © Materials Research Society 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Livage, J., in Better Ceramics Through Chemistry, edited by Brinker, C. J., Clark, D. E., and Ulrich, D. R. (Mater. Res. Soc. Proc. 32, Pittsburgh, PA 1984)pp.125–134.Google Scholar
2. Hirashima, H., Kamimura, S., Muratake, R., and Yoshida, T., J. Non-cryst. Solids, 100, 394 (1988).Google Scholar
3. Lampert, C. M. and Mazur, J. H., in Aerogels, edited by Fricke, J. (Springer-Verlag, Berlin, 1986)pp.154–159.Google Scholar
4. Hirashima, H., Tsukimi, K., and Muratake, R., Seramikkusu-Ronbun-Shi, 97, 235 (1989).Google Scholar
5. Hirashima, H. and Sudoh, K., J. Non-cryst. Solids, 121, 68 (1990).Google Scholar
6. Hirashima, H. and Kusaka, T., (in this volume)Google Scholar
7. Zarzicki, J. and Woignier, T., in Aerogels, edited by Fricke, J. (Springer-Verlag, Berlin, 1986)pp.42–48.CrossRefGoogle Scholar
8. Schaefer, D. W., Brinker, C. J., Wilcoxon, J. P., Wu, D. -Q., Phillips, J. C., and Chu, B., in Better Ceramics Through Chemistry III, edited by Brinker, C. J., Clark, D. E., and Ulrich, D. R. (Mater. Res. Soc. Proc. 121, Pittsburgh, PA, 1988)pp.691–696.Google Scholar
9. Azzam, R. M. A. and Bashara, N. M., Ellipsometry and Polarized Light, paper back edition (North-Holland, Amsterdam, 1987)p.359.Google Scholar