Hostname: page-component-cd9895bd7-7cvxr Total loading time: 0 Render date: 2024-12-27T01:37:09.181Z Has data issue: false hasContentIssue false
  • English
  • Français

Nano-Crystalline Si Based Alloy (nc-SiXY) with Band Gap of 1.5 eV as the Solar Cell Absorber Layer Fabricated by VHF-PECVD Technique

Published online by Cambridge University Press:  21 May 2012

Feng Zhu ,
Jian Hu ,
Ilvydas Matulionis ,
Josh Gallon  and
Arun Madan
Feng Zhu
Affiliation:
MVSystems, Inc., 500 Corporate Circle, Suite L, Golden, CO, 80401, USA
Jian Hu
Affiliation:
MVSystems, Inc., 500 Corporate Circle, Suite L, Golden, CO, 80401, USA
Ilvydas Matulionis
Affiliation:
MVSystems, Inc., 500 Corporate Circle, Suite L, Golden, CO, 80401, USA
Josh Gallon
Affiliation:
MVSystems, Inc., 500 Corporate Circle, Suite L, Golden, CO, 80401, USA
Arun Madan
Affiliation:
MVSystems, Inc., 500 Corporate Circle, Suite L, Golden, CO, 80401, USA
Get access

Abstract

We describe the properties of nano-crystalline silicon based alloy (nc-SiXY) prepared by a very high frequency plasma enhanced chemical vapor deposition (VHF-PECVD) technique with silane (SiH4) and XY gas mixtures and diluted in hydrogen (H2) at low deposition temperature. Varying the gas ratio among SiH4, H2 and XY gasses could alter the optical bandgap and structure. The nc-Si films with high crystalline volume fraction were first prepared, and then the XY gasses were added in order to tune the microstructure and opto-electronic properties of this nano-crystalline silicon based alloy. We have characterized the materials using UV-VIS-NIR, Raman, Constant Photocurrent Method (CPM), dark- and photo-conductivity. As XY gas flows were increased, the optical bandgap of nc-SiXY films increased, while its crystalline volume fraction and conductivity decreased. With proper control of the silane concentration, XY/SiH4 gas ratio, and deposition pressure, we have fabricated the nc-SiXY film with optical bangap of about 1.5eV. Applying this material as the absorber layer in p-i-n devices with configuration of textured ZnO/nc-p+/nc-SiXY/a-n+/Ag, the efficiency is 7.25% (Voc=0.616V, Jsc=17.69mA/cm2, FF= 0.666) with thickness of ∼0.8μm.

Keywords

nanostructurethin filmplasma-enhanced CVD (PECVD) (deposition)
Type
Articles
Information
MRS Online Proceedings Library (OPL) , Volume 1426: Symposium A – Amorphous and Polycrystalline Thin-Film Silicon Science and Technology—2012 , 2012 , pp. 87 - 92
Copyright
Copyright © Materials Research Society 2012

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCE

Meillaud, F., vallat-Sauvain, E., Shah, Arvind, et al. ., JAP, 103, 054504 (2008).Google Scholar
Wang, Yan, han, Xiaoyan, zhu, Feng, et al. ., J. Non-Crystal. 352 (2006) 1909–1912.CrossRefGoogle Scholar
Yue, Guozhen, Yan, Baojie, Ganguly, Gautam, et al. ., APL 88, 263507 (2006).Google Scholar
Klein, S., Finger, F., Carius, R., et al. ., Mat. Res.Soc.Symp.Proc. Vol. 715 A26.2 @ 2002.CrossRefGoogle Scholar
Smets, A.H.M., Matsui, t., and Kondo, M., JAP 104, 034508 (2008).Google Scholar
Werner, J. H., Dassow, R., Rinke, T. J., et al. ., Thin Solid Films 383, 1995 (2001).CrossRefGoogle Scholar
Hegedus, Steven S., Shafarman, William N., Progress in Photovoltaics: Research and Applications 12 (2004) 155–176.CrossRefGoogle Scholar
Meier, J., Flückiger, R., Keppner, H., et al. ., APL 65, 860 (1994).Google Scholar
Vetterl, F. Finger, R. Carius, , et al. ., Sol. Energy Mater. Sol. Cells 62, 97 (2000).CrossRefGoogle Scholar
Mai, Y., Klein, S., Carius, R., et al. ., APL 87, 073503 (2005).Google Scholar
van den donker, M.N., Klein, S., Rech, B., et al. ., APL 90, 183504 (2007).Google Scholar
Madan, A., Shaw, M.P., “ The Physics and Applications of Amorphous Semiconductors ”, Academic Press, (1988).Google Scholar
Nath, M., Roca, P. Cabarrocas, I, et al. . Thin Solid Films 516 (2008) 6974–6978.CrossRefGoogle Scholar